Problem with an Interface....

We have configured, and reconfigured and inteface on one of our Solaris 9, Netra 240 servers. We are having problems with bge0. It does not want to come to the state of RUNNING. ifconfig shows us:
bge0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 2
We have done things like unplumb, plumb ifconfig down, up, etc....

The manual page says:
RUNNING: ... for some interfaces this flag shows that the link is up.
So maybe it is a problem with the cable or the hub/switch you use.
Martin

Similar Messages

Problem with mac interface

Hi !
I just installed Dreamweaver CS4 on my new Macbook Pro. I used to use Dreamweaver CS4 on Windows. But, I have a problem with the interface on my macbook : when dreamweaver is running, I can see my desktop : there is no background like in a MDI application (on windows). To illustrate my problem, I took two screenshots :
on mac :
and on windows :
So, I would like to know how to have the same interface with Mac OS X than with Windows.
Thanx for your help and sorry for my english but i'm french.

Click the green zoom (+) button in the top-left corner of the window to switch between a larger and smaller window size.
Depending on the active application it either fills the entire screen or zooms to the size of the last largest size of the window that you set yourself by dragging bottom righthand corner to desired size.
Photoshop has various ways to hide the Desktop. Either by using the Application frame (which doesn't neccessarily hide the entire Desktop) or by pressing the key F. Wanted by PC users but usually not by Mac users. (I would personaly never use it as it obscures the Desktop so you cannot easily reach other applications and documents by just clicking them to call them into the front and get active).
DW doesn't have an application frame but it is easy enough to fill the entire screen with the active window, particularly if you open up a few panels and dock them to each other and use Split screen view with code on one size and design on the other, then place various bars at top and bottom. When you have organized it to your liking, save it as a Workspace (Window/Workspace Layout/New Workspace) and you have it handy for future use.
Learn how to use the windows and workspaces in an efficient way and one of these days you might get used to it...

Problem with Local Interfaces (WSAD 5)

I built an Entity Bean with Local Interface and a Remote Interface (apperently they both have the same JNDI name in WSAD)
and when I look up for the name from other Session Bean (same EJB group) and I try to cast it to the local interface there is a classCastException.............
HELP ME

Nidhi
I had the same problems as you that went away. If you have both remote and local interfaces defined, and your remote inerface can be accessed via JNDI lookup using (say) "ejb/sessionbean/stateless/HelloHome", then you can access the local intercafe using "local:ejb/ejb/sessionbean/stateless/HelloHome".
The URL http://localhost:9080/UTC/initialize?port=2809 is very useful to browse the JNDI tree. Just expand "Local EJB beans" and position your mouse over the item of interest. The JNDI lookup name will echo in the bottom (solid) frame of the browser. The only problem is that the jndilookup name will appear (mistakenly) as local:/ejb/ejb/stateless......, just get rid of the first forward-slash to make it look like local:ejb/ejb/stateless....
Hope this helps
Somnath

Problem with local interface

Hi all,
I have a problem with the local interface,
after I change the Home and Local interface I get a message when compiling saying that the bean has to implement the inherited abstract method javax.ejb.EJBLocalObject.isIdentical (EJBLOcalObject) and the mothd isPrimaryKey()...why is that, do I need to implement these methods?
Thanks,
A.

solved, wrong code

Massive problem with audio interface

Hi there.
I recently bought a brandnew iMac 27" Haswell i7. I encountered problems with my Focusrite Scarlett 18i8 audio interface. These are buzzing, clicking and noise immediately or after 3 minutes or so. I tried everything, re-installed the driveres several times, nothing, really nothing worked.
Then I bought an RME Babyface audio interface - and guess what? It's the same problem. I also have a massive sound noise after some minutes or the recording channel in Garage Band drops completely.
What is wrong here? I already tried using a different power plug, tried all USB ports, turned off WiFi, HDD sleep mode, etc. Nothing worked.
Do you have an idea?
I appeciate your help,
Adrian.

same problem with my imac late 2012 27" 3.2ghz i5 and the motu ultrilite. up to now i have no solution for this problem. the worst i can't use them never before. since from the first day. i attempt everything. from re-install to fresh install. resetting the nvram and pram. formatting the hd and make a fresh install from the operating system. using balanced audio cables and so on...but same problem all time. even my technological knowledge and know how which i have as electrical engineer couldn't help me. first i was lucky to have apple care in those situations. after get back the imac from the service provider i sadly decide nothing has changed. and they would told me it runs all fine. in meantime i testing my ni audio dj8 over usb. it's similar with the ultralite because the buzzing, clicking and noise is not so extrem as it is on ultralite. but it's here.
the curios with my macbook pro and my old imac early 2008 it runs and works fine without problems. for next week i have fixed a new date by the service provider. but then with my intercace, monitors to simulate this error and i hope they find the reason. perhaps i can tell you some news or solutions next week. i'm relly curious about it.

Firewire problems with audio interface

Hi, I have a problem with the firewire connection of my Power Mac G4: I have a Tascam FW-1884 audio interface and when I turn it on, the firewire led (that should be always turned on for the correct working of the machine) after a pair of seconds turns off and doesn't work at all..
Here's what my system console says if helps..
===== Thu Jan 12 2006 ===== 09:44:12 Europe/Rome =====
Jan 12 09:44:20 localhost kernel: TASCAM FW1884 Audio Device: init (1 of 1)
Jan 12 09:44:20 localhost kernel: TASCAM FW1884 Audio Device: start 1.2.1 (instances 1)
Jan 12 09:44:21 localhost kernel: TASCAM FW1884 Audio Device: message 0xE00087D2 for 0x12060000
Jan 12 09:44:23 localhost kernel: TASCAM FW1884 Audio Device: HandleWatchdogTimer: prefs daemon relaunched
Jan 12 09:44:24 localhost kernel: TASCAM FW1884 Audio Device: newUserClient
Jan 12 09:44:24 localhost kernel: TASCAM User Client: start
Jan 12 09:44:24 localhost kernel: TASCAM User Client: clientMemoryForType
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: High speed bus detected
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FinishStartup: FW884MacXDevice (216812)
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: Driver Register Version 0x00000014
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884REGISTERVERSION 0x00000014
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884FPGAVERSION 0x00010031
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884ARMVERSION 0x000100B7
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884HARDWAREVERSION 0x00030000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884HARDWARESERIAL 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884GUIDMSB 0x00022EFF
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884GUIDLSB 0xFE800000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mRegBaseAddress 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mNodeNum 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mGenerationNumber 0x0000000E
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mlocalNodeNum 0x00000001
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mMIDIReceiveHi 0x00000002
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mMIDIReceiveLo 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: initHardware
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: createAudioEngine
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: init (1)
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: start (3)
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: initHardware (3)
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: performFormatChange
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: performFormatChange
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOCHANNEL 0x00000001
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOSPEED 0x00000002
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New PLAYBACK_ISOCHANNEL 0x00000002
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: DoStartAudioTransfers w/resync
Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: Input stream stopped (B)
Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000200
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000200
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOCHANNEL 0x00000000
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000204
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000204
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOSPEED 0x00000000
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000020C
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000020C
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: New PLAYBACK_ISOCHANNEL 0x00000000
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000022C
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000214
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000218
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000021C
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000228
I've tried running the same interface on my i-book (with the same drivers installed on the powermac) and all was good..
Anyone can help me?
Thanks =)
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz

On both computers I have only one account, the fw cable is always the same..
I have purchased a new cable and I'm testing it..
Another thing to say is that the fw port number 2 is generally working better than 1.. I mean, while port 1 never loads my tascam (the computer firewire connection is always loaded succesfully on both ports) port 2 sometimes works.. well this can't be called stability at all =)
Sometimes reastarting computer, unplugging cables etc can help starting succesfully a new session.. I've already resetted PMU but no progress..
All these things don't last longer than one session..

Problems with the Interface

Hi,have somebody the same Problem with the Login interface before, that I can't type my Username and code, however I click in those typing-blocks it won't allow me to type in... Thanks

What version of Windows are you on (XP, Vista, Windows 7, Windows 8 )? Is it 32-bit or 64-bit? http://support.microsoft.com/kb/827218 What is the version of Internet Explorer installed on your computer? In Internet Explorer go to Help -> About Internet Explorer. P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

Problems with external interface DHCP

Hopefully someone will have an answer to my issue, it has been driving me nuts since I received my base station two days ago.
I have a single static IP address assigned by my ISP, with my old Airport dual Ethernet base station I could plug it in, set it to DHCP and the static address would be assigned by my ISP through my cable modem. I can also plug my MacBook Pro straight into the cable modem, use DHCP and everything works.
I cannot get my new Extreme to work at all, it gets the IP addresses OK but refuses to route between the wireless and the WAN port - it is not happy because it has a flashing orange LED and reports in the Airport Utility that 'AirPort Utility has found an AirPort Extreme that needs attention'.
The thing is that the router IP address I get allocated is the same as my IP address, and my subnet mask is for the host only. For example, if my static IP address is 1.2.3.4, DHCP allocates the following:
IP Address: 1.2.3.4
Subnet Mask: 255.255.255.255
Router: 1.2.3.4
Using these values by either setting them manually or via DHCP gets me connectivity no problem, but the Extreme doesn't like it.
When the Extreme gets the DHCP values they are set right, but there is no routing. If you attempt to set them manually, the AirPort Utility actually says that the router address can't be the same as the WAN address.
Any clues as this is really frustrating me. I didn't have this problem with my Graphite AirPort, my AirPort Express or my Dual Ethernet Airport Extreme.
Thanks in advance.
James

The best advise I can give you is to write down the settings from another device that works when you plug it in, like one of the other routers, and then transfer them to the new Extreme when you plug it in.
One thing though, that subnet mask is a problem. A subnet like that only includes one IP address in its network, itself.
Something I don't understand. Usually when an ISP assigns a static IP you are also given everything else required to set up your equipment manually including subnet mask, router address and DNS server addresses and you are required to configure them manually. The only way I now of to have a fixed IP configured using DHCP is to bind it to the MAC (hardware) address of the router or to use a Client ID. Are you sure that one of these scenarios isn't what you have.
If the IP address is bound using the MAC address, you'll have to inform your ISP that you are replacing the router and to release the old MAC address. If it is by Client ID then you should have that information already and be able to fill it in on the router in the field provided.

Problem with Outbound Interface for Party in Standard XI Content for SNC

Hi All,
I am configuring a standard XI Content for SNC, the ASN Processing (DIMP ERP Backend). The provided Integration scenario involves three swim lanes which corresponds to an ERP, SCM and an external system. The external system is as an application component that is designed for B2B communication, i.e. a service with party which is called Supplier.
The first action within the scenario is Create ASN in the Supplier swim lane and send a message to the action "Receive ASN and update inventory(in transit)" within the SCM system swim lane. I have created a sender party that corresponds to the Supplier swim lane and also a receiver party that corresponds to the SCM system. I used the Integration Scenario Configurator to assign services and also all the comm. channel. However, when i try to generate the logical routing objects and collaboration agreements, i get the error message that there was no outbound interface associated with the sender(the external system) defined for the first action. There is no option within the Integration Scenario Configurator on how to assign/define the outbound interface that I want to use for the sender.
I have no idea how to assign the outbound interface to the action for the Supplier swim lane in an Integration Scenario that is from an XI Content. Has anybody configured something similar or come across the same problem? Any info will be much appreciated.
Luqman

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

BPM problem with sync interface.

Hi
I got one Abstract/Async and one sync interface in my BPM and I'm getting MESSAGE_NOT_USED error between them, my scenario is RFC to JDBC to RFC(response with different FM) so BPM receives data from RFC sender through Abstract/Async interface but after that interface, I'm getting the that error (MESSAGE_NOT_USED), the weird thing is I got another scenario almost same and its working, I did a new project with exactly the same interfaces, Mappings, interface det., Receiver det., senders and receivers but I'm still getting the same error, even I tried "RFC scenario using BPM--Starter Kit" Blog but same thing, btw everthing is 0 in SXI_CACHE, I'm going to go mad or something, please help..
Thanks

CALL FUNCTION 'Z_TSSI_INTERFACE_DUMMY'
     IN BACKGROUND TASK
      as separate unit
     DESTINATION 'TSSI_OUTBOUND1'
EXPORTING
    jobno              = jno
    PERSNO             = pers
    BEGDA              = '20051231'
    ENDDA              = '20051231'
    ABSTYPE            = 'xx'
    ABSHOURS           = '7'
    ABSDAYS            = '1'
    FULLORHALF         = 'false'
    uname              = sy-uname
    date               = '20060201'
    time               = '110000'
TABLES
    RETURN             = ret
    Commit Work.
The thing is this abap is working in another scenario, but when I copy the exacly the same scenario, it doesnt work, its weird, btw I noticed that evertime I run any scenario, short dump occurs, its about RFC authorization for XIRWBUSER user but I got the OSS note for that, I applied it but it didnt solve the problem, btw this short dump happens when I run my workign scenario as well.. this is driving me crazy..

EJB problem with home interface

Hi firends
I am beginner to EJB world, and trying first EJB object i.e. Hello World program
I prepared first Remote interface, HelloBean and it compiled also properly.
names of program
Remote interface : Hello
Bean: HelloBean
Home interface : HelloHome
But after preparing Home interface it fails to compile at position of create()
the declaration is
public Hello create() throws RemoteException,CreateException
compilation error pointing at Hello in above statement saying 'Cannot resolve symbol'
The fact is all these files are located in same directory only
can anyone help me in this problem as I am eger to execute my first program and want to go further in EJB
thanx in advance
Mandar

Hi Mandar,
How are you setting the classpath and what exactly is it set to?
Unresolved symbol can only mean that the class cannot be found in the classpath. If two files are in the same directory and one has a dependency on the other then adding '.' to the classpath is all that is needed. Questions to ask yourself. Are the files in the same directory? does either include a 'package' statement? and are you absolutely certain that the classpath is set correctly (type 'set' at the command line)? Also if you have set the CLASSPATH variable, using -classpath with the javac command will override the variable.
Check everything above and if you still have problems maybe we can get some more details if you can post the entire error message.
Mandy

Problems with syncing interface in ITunes 10

I just downloaded ITunes 10, and now the syncing interface will not appear for my IPod Nano (3rd generation). How do I fix this??

ChuahS wrote:
Hey all,
I just bought myself a new pc with windows7 64bit. After installing the new Itunes10 i connected my Ipad to my pc. W7 recognised the device, but it seems Itunes doesn't show my Ipad. I reinstalled Itunes, but this didn't help the problem. I also tried connecting my Ipad to every usb port that was on my pc, but none seemed to work so to show my Ipad in Itunes. This is very strange, cause on my old pc with w7 32bit and Itunes9 it showed my Ipad perfectly. Any ideas on how to fix this?
This may be of help http://support.apple.com/kb/ts1538

Playback Problem with Tascam Interface

Hello,
I am new to Logic, and I seem to be having a playback problem. After a quick search, I realize this question is asked a lot, but I have yet to find a solution that has worked. I am using a Tascam US-144 USB 2.0 Audio/MIDI interface with Logic Pro 8. Logic is recognizing the interface, allows me to record, and even displays the wave forms that my microphone picks up. However, I cannot monitor while I am recording or play the recording back after saving it. I've attempted to do this with the built-in iMac speakers and headphones. I've tried various output combinations, read the manual front to back, but have yet to find a valid solution. Any help would be greatly appreciated. Thanks.

In the About Logic window it says it's version 8.0.0. I checked Preferences->Audio->Devices->Core Audio. The"Enabled" box is selected, and the US-144 is selected as the device. There doesn't seem to be a tab in that window to select an output. On the bottom left of the screen under "I/O" I have Input 1 selected as the input and Out 1-2 selected as the output. Do I need to select a different output in that tab, or do I need to change it elsewhere?

Problems with reading Interface data

Hi all,
I try to fill an interactive form with the data I filled into my interface.
I have no problems to include data to a textbox, but when I try to change the data, the box leaves empty.
Also I must get data from the interface in background to compare them, but I can't find any possibility to read data from the interface to a variable.
How can I solve that problems? Any ideas?
Greets Andreas
EDIT:
I use Adobe Livecycle Designer with APAB (Transaction: SFP)

Hi Maksim,
To understand if you have set correct regional settings for you SAP BPC server you have to check the follow keys:
HKEY_USERS\.Default\Control Panel \ International
HKEY_USERS\S-1-5-18\Control Panel \ International
HKEY_USERS\S-1-5-19\Control Panel \ International
HKEY_USERS\S-1-5-20\Control Panel \ International
HKEY_USERS\S-1-5-21\Control Panel \ International
HKEY_USERS\S-1-5-21.....\Control Panel \ International
should have all the keys for English US.
Kind Regards
Sorin Radulescu

Newbie problems with USB interface

Hi. I'm new here. I have GB 2 running on a mini. I'm trying to use my old DX7 as a controller, running through a Tascam US 122 interface that I bought on Ebay. (I know, that may be my first problem, the Ebay part). Anyway, it's been very frustrating getting any midi signal into GB. It HAS worked, but far from consistently - in fact, the most consistent thing has been it not working. I have been able to record two very short pieces, but then I tried it the next day and got nothing at all.
Is there anything I might be doing wrong here? I can see that midi signal is getting to the US 122, but then nothing goes into GB. I have a software instrument selected, and I can hear the other tracks just fine. I can see that the mini acknowledges the US 122, and my preferences in GB for audio/midi are set for the 122 and output for built-in audio.
What am I doing wrong? Or is my US 122 broken? How can I check? I've tried using a different keyboard, and the same thing happened.
Thanks for any direction you can give me. John

It's a .sit file. A bit of research turned up that Stuffit Expander is not shipped with the latest version of OSX, so I went and downloaded it from their website, installed it, and opened and installed the new driver. A quick test this morning (all this took place in about a half-hour before I went to work today) seems to indicate that it works, at least with the midi controller. I'm happy but still sceptical, since it has worked before and then stopped. Another quick check showed that I still was unable to record the DX 7 as a real instrument, but that may be an issue with my GB settings. More tests soon...
Thanks for the help, folks. I'll post again to see if it's still working.

Problem with an Interface....

Similar Messages

Maybe you are looking for