Problem with an SD / MMC Card Reader!!!

ok here's the problem! i bought this 512MB DVRS MMC for my cell phone so i kinda thought maybe i could use a card reader ...it will be much faster than the usb cable..so i bought one...the memory works fine in the phone but the reader doesnt recognize the new memory..when i put the 64MB one it works ok and both works fine in my phone!!! maybe i got the wrong reader for this new MMC coz these metal things on both cards doesnt look the same as u can see --->
[IMG]http://img03.picoodle.com/img/img03/9/9/1/f_MMCm_f8e1c5d.jpg[/IMG]
the one on top is the new 512MB DVRS MMC..thanx in advance

sorry card readers can't read cards with password
remove the password (it exists)
T18>6210>8310>6800>6210>7610>6680>6210>E50>3110>2610>E65>E61i

Similar Messages

Integrated SD/mmc card reader

I have a strange problem with the integrated sd/mmc card reader on my laptop. I know I have everything correctly configured and the needed modules loaded because I can use a 16MB and a 128MB SD cards without any problem. When I insert any of them udev creates the devices:
From /var/log/messages.log
mmcblk0: mmc0:1d00 SD016 14560KiB
mmcblk0: p1
mmcblk0: mmc0:4125 SD128 123008KiB
mmcblk0: p1
and the devices:
ls -l /dev/mm*
brw-rw---- 1 root disk 254, 0 abr 10 17:14 /dev/mmcblk0
brw-rw---- 1 root disk 254, 1 abr 10 17:14 /dev/mmcblk0p1
I can mount the second device and access to the card.
But if I use a 256MB or a 1GB card udev does not detect them and does not create the mmcblk devices. Also no messages in the logs. Any idea of the reason?
The only log is when I remove the card:
mmc0: Card removed during transfer!
mmc0: Resetting chip
Some days ago I was still using Slackware and I could read these two cards. The kernel was a 2.6.17, so it may be a bug in the 2.6.20 kernel?
The card reader is a Winbond W83L51xD and the modules required are mmc_core, mmc_block and wbsd.

So this is what my /etc/modprobe.d/mmc.conf contains:
options sdhci debug_quirks=0x40
options firewire-ohci quirks=0x10 debug=0xf
and now, on reboot, when loading user-specified modules, I get the same error:
mmc0: Unknown controller version (16). You may experience problems.
and this is what dmesg says now:
Feb 12 21:43:17 localhost kernel: [ 5.253868] sdhci: Secure Digital Host Controller Interface driver
Feb 12 21:43:17 localhost kernel: [ 5.253873] sdhci: Copyright(c) Pierre Ossman
Feb 12 21:43:17 localhost kernel: [ 5.261558] sdhci-pci 0000:06:02.2: SDHCI controller found [1217:7120] (rev 1)
Feb 12 21:43:17 localhost kernel: [ 5.261577] sdhci-pci 0000:06:02.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 12 21:43:17 localhost kernel: [ 5.261602] mmc0: Unknown controller version (16). You may experience problems.
Feb 12 21:43:17 localhost kernel: [ 5.261807] _regulator_get: 0000:06:02.2 supply vmmc not found, using dummy regulator
Feb 12 21:43:17 localhost kernel: [ 5.261874] Registered led device: mmc0::
Feb 12 21:43:17 localhost kernel: [ 5.262941] mmc0: SDHCI controller on PCI [0000:06:02.2] using PIO
Feb 12 21:43:17 localhost kernel: [ 5.293700] firewire_ohci 0000:06:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 12 21:43:17 localhost kernel: [ 5.293710] firewire_ohci 0000:06:02.0: setting latency timer to 64
Last edited by sergiuniculescu (2012-02-12 20:50:16)

Camera Connection Kit with a SanDisk CF card reader not working in iOS4

Camera Connection Kit with a SanDisk CF card reader worked great before switch to 4.2.1. Now I get a message:"The connected USB device requires too much power". Again, worked great in OS3. What did Apple change? Same circumstances. The CCK works with the SD card reader, so it is working. Anyone running into this problem? Any answers? I have to use CF cards. As do many people with DSLRs.

I would be very happy for Apple to make a Compact Flash card reader just like the SD connection. Its something I would purchase immediately. Sadly Apple is yet to realise that not everbody uses crappy little point and shoot or entry level DSLR cameras and those that have the high end gear are those who woulld actually use the iPad in the real world for a travelling "light-box".
BTW does Apple ever look at this forum? or is it just a place that they specifically ignore when it comes to faulty programming or products?

Pavilion g6 series SD-MMC card reader NOT working

I have Pavilion g6 series. My SD-MMC card reader isnt working. How to fix?

Downloading this driver should sort out the problem!
http://download.gamblis.com/2011/03/30/hp-pavilion-g6-1a69us-notebook-realtek-card-reader-driver-6-1...

Problem with my amd graphic card

Hi.. I have a problem with my amd graphic card.. The card is amd radeon 6770m.. I did format on my laptop and when I tried to install the catalyst center which includes the driver, it displays a message which say that catalyst center stop working... I have downloaded all the versions of the driver since 2011 when I bought the laptop... But I have the same problem whichever version I try.. I also have updated the bios to the last version but nothing happens..I think maybe graphic card is broken.. Thanks for reading..

Hi @Lefteris93 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your I would uninstall all the software and drivers for AMD High-Definition (HD) Graphics Driver and Catalyst Control from the control panel and the Device manager. Restart the notebook and download from here.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. This will help update the drivers that have been installed on the Notebook. If you graphics card was damaged or not functioning you would have a black or blank screen.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

Problem with SB1240 USB sound card

I'm pulling hair here! I've just bought a SB240. Windows (XP Pro, SP3) detected it and I can select it fine for listening. But when I open Sound and Audio Device Properties and select Sound Recording/Volume, I see the Capture panel with the three inputs, but all the controls are greyed out and immovable. I also use the application "Total Recorder" by High Criteria, in which I can select the SB240 device but the only input line it sees is SPDIF Interface.
I'm stumped. Can anyone help?
John?

&Re: Problem with SB240 USB sound card
Thank you. I did a complete uninstall, including the device itself (from Device Manager) as well as all drivers and any SB related software. As recommended by Creative, I had previously installed the driver software from the supplied CD and that seems to have been the problem.
I let Windows re-detect the SB, but? got a "problem ... device may not work correctly.." during the detection, so I was not hopeful (this had not happened the first time I installed the device).
Nevertheless it now does work fully and is properly configured in "Total Recorder" too.
So I would suggest not using the supplied drivers and software - at least not in WinXP. But it's not very confidence inspiring.
John

I am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation

i am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation,what can i do to activate

This is the Adobe Reader forum. If you are talking about Digital Editions, the right forum is here:
http://forums.adobe.com/community/adobe_digital_editions

Help with Mac Book Pro Card reader

I am hoping that maybe someone here can help me with my MacBookPro OS X 10.8.3 problem.
All of a sudden, when I put a card from my camera into the card reader and into the computer, it says that there are 0 items.
It worked fine last week, and now it doesn't.
It also will not let my external hard drive work on it. When I plug it in, the icon shows up on the desk top but says that there are 0 items in it, and I know that isn't true.
Please Help-thank you

try other gadgedts to make sure SD is not empty or formatted

Can anyone help with a troublesome FireWire card reader

I have an Addonics firewire card reader to transfer image files to my Macs. It has never been predictable about mounting on the desktop when I insert a card. I've used it with OS 10.2, 10.3 and now 10.4.8. I have the OS set to open Photo Mechanic when I insert a card, but most times, nothing happens. After trying various daisy-chain connections, I have the reader connected directly to the computer, but this hasn't helped.
Usually, I have to disconnect the cable, then re-connect; I usually do this at the reader end, to save wear and tear on the computer port. Sometimes multiple attempts are necessary, but in the end, this procedure gets results better than anything else. I have tried a different cable, known to be good, with no improvement.
I have a little utility called Spindown HD, which shows what's attached, and in fact, the reader shows up as connected, but sleeping. So, perhaps this is a "wake-from-sleep" problem instead.
By the way, Addonics "support" was useless. Their site states that they offer no support on products over two years old. An email inquiry brought the response that they could do nothing to help. On service quality grounds alone, I have bought my last Addonics product.
Do others have problems with getting FW readers to respond? This is driving me crazy, and wearing out ports or connectors.

bad card reader, un-supported by Addonics (mfg)

IPhoto '11 problem downloading pix w/external card reader

Lately my external card reader won't download pix to iPhoto. The device shows up on the desktop but not within iPhoto so no pictures are downloaded. Bought a new reader (Hoodman), but problem remains. Tried restarts, which sometimes works but now mostly doesn't. This only started happening sporadically a few months ago. The old card reader works just fine on my husband's iMac, so I don't think it's the card reader's fault. Anyone else having these problems? Or have a fix? I've got a bunch of pictures to get into iPhoto and am stymied. I'm on an iMac, Snow Leopard (10.6.8), using iPhoto '11 (v9.2.3).

Thanks for the suggestion. But after creating that test library you suggested I still don't know how to get back to my original library when I launch iPhoto. Could you please guide me through that? I've never done this before and am nervous about the whereabouts of all those 1000s of pix I have (even tho I'm backed up w/Time Machine).
By the way, I just noticed a similar discussion about a year ago with the identical problem, numerous reports of the external card driver suddenly not being recognized by iPhoto. Sounds like an unsolved, ongoing problem. Guess I need to file a report with Apple.

Latest problem - can't import using card-reader

In Bridge>File>Get Photos from Camera.....
App recognises there is card reader and card and amount of photos and then when asked to "get Photos", I get this message:-
"Adobe Bridge CS3 cannot obtain files from this device. Please ensure that the device is connected properly, or that the battery is charged, and try again."
What does this mean? - I am using a card reader, there are no batteries! There is never any problem when I import using Capture One Pro or iPhoto or LightRoom or Aperture with this method, so why now?
Any thoughts?
Cheers
Frances

First check if you have the latest version for Bridge CS3 (it should be 2.1.1.9)
Then restart Bridge holding down option key to refresh the preferences. Then set the preferences again to your wishes and try again.
You should prefer a card reader for downloading images instead of directly from the camera. there are several threads with the reason why this is a better method.
Photodownloader can do this job, don't forget to explore the advanced settings :-)

UNRECONIZED PROBLEM WITH SB AUDIGY SOUND CARD

Hi, you all. Pls help me with this problem of my SB Audigy Platinum (SB0060). In Windows XP or even Windows Vista, they can find out my sound card as an Multimedia new hard ware, but when I install sound card driver from CD (original CD driver) fail to install and a message like this: "we cannot find any support products in this computer, pls make sure that is is plugged in your computer already...". I am very disappointed with this 'cause i really like the quality of this Creative sound source. Pls help me. Thanks a lot! Pls answer me : [color="#000099">[email protected](PS: THIS CD DRIVER COMES WITH THIS SOUND CARD BOX, AND I TRY TO INSTALL A NEW FRESH WINDOWS WITH STANDING ALONE SOUND CARD WITH NO CONFLICT TO OTHER PCI CARD, STILL FAILED)

. A friend of mine who also has this soundcard, claims he has a Decoder tab in his device controls in audiohq.. But I dont?!?

That is quite odd. Your Audio HQ should look like this: http://img23.echo.cx/img23/8494/hqdecode7kl.jpg. If not, then you should uninstall you drivers (using the CTZAPXX.exe app on the CD) and reinstall them.
2. When I choose to calibrate my speakers -> basic, FL, FR, RL, RR, C plays ok BUT after that a low freq sound plays for 3 secs then my SL and SR starts to play a high freq beeps respecti'vely...
The program does the same thing on my old T5400 and my current Cambridge MegaWorks 550. My brother has the Audigy 2 ZS also and his Logitech Z-5300s do it as well. I think the program is funky, not your speakers.
3. Since I want to enjoy DTS, I downloaded Windvd, cofigured it to 8 channels (7.). But the SL and SR wont play anything... So I tried Windvds test and all goes well until it is SL and SR turn, they dont play anything... Almost the same as the speaker calibration app. BUT note that in the Creative THX setup console everything works well...

Go into the Options for your DVD software (this applies to any player, not just WinDVD) and set it to S/PDIF Passthrough. This will send the digital signal to your card, which will see it and decode it. Setting WinDVD to 7. mode will try to have the CPU decode the signal. If it doesn't work with WinDVD, then try using Media Player Classic 6.4.x.x and setting the decoder settings to Digital Passthrough. Note that you need to make sure the that decoders are enabled in the Audio HQ (for which you may need to reinstall your drivers.
Note: DTS-ES supports 6.. Dolby Digital EX supports 7., I think.

Unable for format SD card with HFS using internal Card Reader

I'm suspecting that this must be a software/driver issue, but I'm stumped... MacBook Air Mid2012 with 10.8 and latest updates.
The symptom is the following: SanDisk 64GB UHS card in the SD Card slot. Formats fine both FAT and ExFAT. Attempting for format HFS (any combination of encrypted, case sensitive, etc), the card formats but can't mount. Repair fails too.
Now here's the kicker, put the same card in and external SD Card Reader (via USB), it formats HFS and mounts fine. Still can't mount via the internal reader though. Tried other SD cards, down to 4GB, same deal...
Hope someone has seen this before!
Thanks

Just a followup, in case others read this thread.
The problem was a hardware issue, requiring the LogicBoard to be replaced.
A quick test to verify the problem is to insert a SD Card, run Disk Utility and Erase the SD Card. Any format (FAT, HFS, etc) will be fine.
Once the Erase is complete, run a Verify Disk. If you have LOTS of errors during the verify, then there is a problem.
Thanks

A problem with ALL creative sound cards i am hav

All creative sound cards that i've used, three i think in the past year. SB Li've, SB Audigy 2 ZS, and the Audigy 2 Zs Platinum Pro. Every time i connect speakers or headphones to the jack, i get really REALLY low sound output, also before windows loads or shuts down i hear a "bump" coming from my speakers/headphones.... I have no idea whats going on....
Specs are:
p4. 3.0
DFI Lanparty 875 rev. B
gig corsair pc4000 dual channel
2x raptor raid 0
SB Audigy 2 ZS Platinum Pro
ATI Radeon x800pro
Headphones i use are bose acoustic 2 headphones
Speakers are logitech x-530
If anyone has had this happen to them before or if anyone has any possible remedies for this I would really appreciate, if this doesnt help im done with creative sound cards =/
[edit]: forgot to mention this is only for the audio jacks on the sound card itself, on the ZS platinum pro, when i connect to the jack on the hub, the sound is alrightMessage Edited by mrkuku on 06-2-2005 06:36 AM

figured out my problem, my built in sound card drivers were conflicting with the creative drivers. Thought that if i turned off the built in sound card from bios that i wouldn't need to delete the drivers also. Thanks for any that read this and tried to figure it out. Now its working like a charm.

Problem with an SD / MMC Card Reader!!!

Similar Messages

Maybe you are looking for