Problem with an unavailable server and the "Offline address book" rol

I have a site with two Exchange 2007 servers and tried to install a new Exchange 2013 but the process did not end well.
Now the 2013 server has the role of "Offline address book" and is no longer available which creates multiple problems. How I can do to remove the references to the 2013 server and move the role referred to one of the existing Exchange 2007 servers?

My recommendation would be to fix whatever went wrong and complete the setup.
The server is probably the generation server for a new offline address list. Check that by entering the following command.
Get-OfflineAddressBook
If there's a new list created by Exchange 2013 setup, you can simply remove it using Remove-OfflineAddressBook, and that should take care of what you're seeing.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

Any problems with Adobe CS5.5 and the Maverick system?

Has anyone had any problems with Adobe CS5.5 and the new Maverick OS? I don't want to install if there are issues. Thanks!

First thing I would suggest is to upgrade your server OS to a newer version if possible. Secondly try removing the apps out of the allowable apps list and instead change it so that you allow the apps that are within the specific application folder, ex: Applications/Adobe Photoshop CS5
I had similar problems with CS5 apps and by adding the apps by allowable folder instead it corrected my problem. Granted, if you have savvy users, there is the potential to open a can of worms here but it was the only way I could get it to work for "standard" non-admin user types.

I can't text a contact but can voice phone them. I don't have the problem with any other contact and the contact is not blocked. I have an iphone5.0 OS 8.1.3

I can't text a contact but can voice phone them. I don't have the problem with any other contact and the contact is not blocked. I have an iphone5.0 OS 8.1.3. I used to be able to text them with no problem. The only difference I can think is that this problem may have started since I downloaded the OS I am using now
cycleluke

Wasn't responding to you. Please show me links where this helped.
Apple isn't showing any system problems: https://www.apple.com/support/systemstatus/

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541

Can you rename the Personal Address Book and the Collected Address Book?

I would like to rename my Personal Address Book and my Collected Address Book for aesthetic reasons - is it possible and how do you do it?

You can rename them but it is not recommended. What purpose is served by renaming the default books? You can create new books and name them anything you like.

Problems with my Synology server and iTues

Hello,
I hope somebody can help me with my problems.
Facts:
I have a Mac Mini 2 and a Synology server DS209 (both newest firmware)
I stored my complete Music and Videos on the server. The location for the iTunes Media folder is changed to the server location.
Problems:
1. Sometimes songs get mixed up in iTunes. iTunes libary says this is song 'A', but when I play the song, song 'B' is playing. When i want to check the information about this song (via 'Get Info') iTunes automatically update the ID tags and I see the information of song 'B'. It also happens that I updated song 'A' with my iPod and when i play the song on the ipod, I see the ID tags von song 'A', but listen to song 'B'.
2. iTunes has very often the problem that it doesn't find my videos. I realize that when I sync my iPad, then many vidos are not available. I check these files and i see the . But when I select the "Get Info" and some seconds later the file is found and the 'location' is shown correctly. This happens NOT to all videos, only some, but it is every time the same videos.
Question:
I'm wondering if this has something to do with the server I use. Can anybody help me, because this is sometimes really annoying.
thanks

Don't you think it might be a good idea to find out what kind of IOException you're getting? At least display ioe.getMessage. showMessages will take an Object array instead of a single string so you can do:
JOptionPane.showMessageDialog(null, new Object[]{"Error in server", ioe.getMessage}, "Error",
JOptionPane.ERROR_MESSAGE);

Big problems with Windows 2003 Server and FX5900

Getting repeated lockups using MSI FX5900XT and Windows 2003 Standard Server. Mouse stops responding and system occassionally locks up completely. I have a dual boot system and windows XP works fine. Windows 2003 works fine if I use the standard VGA driver (I use 1600x1200 16bit 75 Hz resolution and refresh).
The event log usually says:
Event Log
Event Type:   Error
Event Source:   nv
Event Category:   None
Event ID:   108
Date:      18/07/2004
Time:      13:28:25
User:      N/A
Computer:   HOME
Description:
The driver nv4_disp for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a
problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your
hardware device vendor for any driver updates.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Presently using the latest drivers
Any ideas
Thanks
Will

IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   Creative SB Audigy   OK
IRQ 16   NEC PCI to USB Open Host Controller   OK
IRQ 17   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 17   NEC PCI to USB Open Host Controller   OK
IRQ 18   NEC PCI to USB Enhanced Host Controller (B1)   OK
IRQ 19   MSI MS-StarForce GeForce FX 5900XT (NVIDIA GeForce FX 5900XT)   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA nForce MCP Networking Controller   OK
IRQ 21   Standard OpenHCD USB Host Controller   OK
IRQ 22   Standard Enhanced PCI to USB Host Controller   OK
IRQ 22   OHCI Compliant IEEE 1394 Host Controller   OK

Weblogic: problem with JMS foreign server and Transaction

Hello everyone,
I am working with an enterprise application with Web Application Server Logic 10.3. L 'application uses the following components:
1) MDB 2.0
2) FOREIGN JMS SERVER -> WebSpereMQ
3) EJB SESSION
L 'MDB calls the session bean which uses in its ejb-jar.xml using a Wrapper for JMS QueueConnectionFactory with res-ref:
<resource- ref>
<res-ref-name> jms / iss / QCFIXP </ res-ref-name>
<res-auth> Container </ res-auth>
<res-sharing -scope> Shareable </ res-sharing-scope>
<resource- ref>
The MDB is CMT
<transaction-type> Container </ transaction-type>
while the session bean is BMT
<transaction-type> Bean </ transaction-type>
to call the QCFIXP in its transaction.
The QCFIXP ii an XA resource
When there is a rollback operation in SessionBean also in 'MDB
There 'an operation setRollbackOnly:
getMessageDrivenContext (). setRollbackOnly ();
After this operation on the MDB I do a JNDI look up the QueueConnectionFactory but sending the message on a queue I get the following exception:
javax.jms.JMSException: [JMSPool: 169809] An error occurred while registering the JMS connection with JTA:
But if not using the "wrapper jms" in the session bean I did not take any exception and the application don' t have any error.
My doubt is :
Why if I use the JMS wrapper I get an error javax.jms.JMSException: [JMSPool: 169809] An error occurred while registering the JMS connection with JTA?
Thanks in advance.
Michele
Edited by: user3501731 on 11-mag-2011 3.16

Hi Tom,
Thanks very much for your responses and careful analysis you've done.
Following the source code of the MDB where error occurs.
Marked In bold the line where the exception is thrown.
     public void onMessage(Message msg) {
//          Utility.logger(AP.DEBUG, "Partito MDB 2");
          processa(msg);
          protected void processa(Message msg) {
          Utility.logger(
               AP.DEBUG,
               "IXPReceiverMDB7.processa(Message msg) partito");
          try {
               long start = System.currentTimeMillis();
/*               Utility.logger(
                    AP.DEBUG,
                    "IXPReceiverMDB.processa(Message msg) effettuo lookup");*/
               ejb = myEjbLocalHome.create();
               // individuo l'identificativo del messaggio in ricezione
               String msgid = msg.getJMSMessageID();
               Utility.logger(
                    AP.DEBUG,
                    "IXPReceiverMDB7.processa(Message msg) elaboro messaggio:"
                         + msgid);
               String charset = msg.getStringProperty("JMS_IBM_Character_Set");
               Utility.logger(
                    AP.DEBUG,
                    "IXPReceiverMDB7.processa Charset:" + charset );
               // invoco il processo di ricezione
               boolean commitRequested = ejb.processa(ctlReq, encoding, msg);
               // il valore di ritorno del processo di ricezione identifica o meno
               // la necessita' di effettuare il rollback dell'intero processo
               if (!commitRequested) {
                    getMessageDrivenContext().setRollbackOnly();
               if (ctlReq) {
                    Utility.logger(
                         AP.INFO,
                         "IXPReceiverMDB7.processa(Message msg) spedisco il messaggio pilota del 'cleaning' con JMSCorrelationID = '"
                              + msgid
                              + "'");
                    msg.setJMSCorrelationID(msgid);
                    // Viene creata la QueueConnection
                    QueueConnectionFactory factory =
                         JmsFactoryDispenser.getSingleton().getFactory();
                    QueueConnection connection = factory.createQueueConnection();
                    // Viene ottenuta la 'session'
                    QueueSession session =
                         connection.createQueueSession(
                              false,
                              Session.AUTO_ACKNOWLEDGE);
                    // spedisco il messaggio sulla coda abbinata al processo di 'cleaning'
                    // della coda di controllo
                    IXPMessageManager msgManager = new IXPMessageManager(session);
                    msgManager.spedisci(msg, AP.PILOTQUEUE, "J", AP.STD_MESSAGE);                    session.close();
                    connection.close();
               long end = System.currentTimeMillis();
               Long durata = new Long (end - start);
               Utility.logger(
                    AP.INFO,
                    "IXPReceiverMDB7 Tempo totale elaborazione messaggio: " +
                    msgid + " " +
                    durata.toString() + " mill" );
               Utility.logger(
                    AP.DEBUG,
                    "IXPReceiverMDB7.processa(Message msg) terminato");
          } catch (Throwable e) {
               getMessageDrivenContext().setRollbackOnly();
               try {
                    Utility.myExceptionHandler(
                         "E",
                         "1",
                         "4028",
                         "IXPReceiverMDB.onMessage()",
                         e);
               } catch (Throwable ex) {
                    ex.printStackTrace();
Thanks in advance.
Edited by: serpichetto on 16-mag-2011 1.24

Problems with importing .MP4 file and the audio in FCP 6

Hi all,
I am pretty new to Final Cut Pro and have just approached my first project.
I have a Samsung VP-MX20
http://www.samsung.com/uk/consumer/detail/spec.do?group=cameracamcorder&type=cam corder&subtype=flashcamcorder&model_cd=VP-MX20/XEU&fullspec=F
*Codecs H.264, AAC.*
I needed some space on the camera so halfway through a holiday i transfered all the video files from the camera to my Laptop.
I have imported these files from the hardrive
Vid rate - 25 fps
compressor - H.264
Pixel Aspect - PAL - CCIR 601
What seems to be the problem is ok when i drag the clip from the viewer to the canvas and apply insert, i get the box that says 'Change Sequence settings to match the clip settings?
i click yes and when the clip is layed out on the timeline there is a red line above the timeline, when i play the clip i only get bleeps as audio and not the original sound.
If i drag the playhead i can hear the audio but if i try to play all i hear us bleeps plus if i import an mp3 the red line appears above the timeline and the same applies
can anyone help me here.
Thanks
Elles

Hi Zak,
many thanks for your reply, i have contacted Apple and taking your advice and using compressor i have converted the codec H.264 to Apple Pro Res 422 for interlaced material.
I have imported this file and when i drag once again from the viewer to canvas i get the standard box asking to change the sequence to match the clip.
I am still getting the red line above the timeline and bleeping as audio.
any idea?

HT4864 problems with iCloud mail server on the mail, but it does not fix it when I put the password in, keeps asking me for password. When I go into iCloud to access it from safari, it accesses the icloud fine with my password. I have reset all the settin

I am running os x 10.7.5, on a macbk, I have been using all the apps fine and not changed anything or run any software updates, suddenly my mail dows not think it can connect with the outgoing server for icloud and requests my password, which I give, but it repeatedly asks again and again. I have tried re-setting all the mail for icloud up again, and it thinks its ok, except the box keeps flagging up can't access outgoing server. I have checked it all a number of times, and I can access the icloud stuff including mail from http when I log in there. Anyone know why my mac will not accept my icloud password? suddenly I cannot get any icloud mail in or out, but I changed nothing. Why does it do this and why can't i fix it?

No carrier "automatically" unlocks at end of contract - many won't do it at all, even if requested. I don't know what your carrier's policy is since you didn't say what country you're in.
However, if I understand you correctly, you didn't change carriers so it doesn't matter if it was unlocked or not. Try the following steps, as needed:
1. Reset phone - press both home and sleep/wake buttons for at least 19 seconds until the Apple logo appears
2. Settings > General > Reset > Reset Network Settings
3. Restore phone in iTunes using a backup
4. Replace SIM card (don't care what Telstra says)
5. Restore phone in iTunes as new, without using a backup
6. Take phone to Apple.

Problem with Adobe Document Server and MSS PCR's

Hello gurus,
We are implementing ESS and MSS on ERP 2005, and our technical team is having lots of problems to make ADS work. Apparently the problem is that the ADS is not actually supported by SAP for 64-bit servers.
But I need to configure MSS PCR's that use Adobe Interactive Forms. So I need help in 2 different ways:
- Do you know any possible solution to the compatibility problem?
- Is there any way to make PCR's work in ERP 2005 without using Forms. Is this a sensible thing to do?
Thanks,
Andres

You will need ADS to make PCRs work. There is no way around it.
The only option I can think of is to upgrade the server. go to service.sap.com/pam to find out what's supported.
James

Problems with OC4J EJB deployment and the data-sources.xml file

I am running 2 Windows 2000 Machines one with the 8.1.7 database another with iAS 1.0.2.2.1 and OC4J.
I am trying to deploy a 3rd party EJB-based application whic seems to have deployed successfully except when I try to test the EJB deployment via a jsp it can't connect to the database, giving the error:
1/16/02 4:52 PM VerySimple: Servlet error
java.lang.NoClassDefFoundError: com.netexp.user.UserManagerHome
at com.netexp.beans.BeanHelper.class$(Unknown Source)
at com.netexp.beans.BeanHelper.getUserManagerBean(Unknown Source)
at /very_simple.jsp._jspService(/very_simple.jsp.java:48) (JSP page line 27)
at com.orionserver[Oracle9iAS (1.0.2.2.1) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:54)
at com.evermind[Oracle9iAS (1.0.2.2.1) Containers for J2EE].server.http.HttpApplication.serviceJSP(HttpApplication.java:5459)
at com.evermind[Oracle9iAS (1.0.2.2.1) Containers for J2EE].server.http.JSPServlet.service(JSPServlet.java:31)
at com.evermind[Oracle9iAS (1.0.2.2.1) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:508)
at com.evermind[Oracle9iAS (1.0.2.2.1) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:177)
at com.evermind[Oracle9iAS (1.0.2.2.1) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:576)
at com.evermind[Oracle9iAS (1.0.2.2.1) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:189)
at com.evermind[Oracle9iAS (1.0.2.2.1) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:62)
I try to update the file using the installdatasource switch thus:
C:\Oracle\iSuites\j2ee\home>java -jar admin.jar ormi://localhost admin adm_pwd -application apptricityII -installDataSource -jar %ORACLE_HOME%\jdbc\lib\classes12.zip -url jdbc:oracle:thin:@db_host.unitas.com:1521:db_name -connectionDriver oracle.jdbc.driver.OracleDriver -location jdbc/pool/OracleDataSource -username scott -password tiger
And get the following error:
Exception passing by from remote server: java.lang.InstantiationException: No class specified for jdbc/pool/OracleDataSource
java.lang.InstantiationException: No class specified for jdbc/pool/OracleDataSource
<<no stack trace available>>
Error adding source: No class specified for jdbc/pool/OracleDataSource
Please advise.
I have followed the instructions in 'EJB Primer' and 'Using Oracle9iAS Containers for J2EE' to no avail. And I can't find any meaningfull data-sources.xml samples. I have been struggling with this for some time.
Is there any other file, do I need to bind anything?
I'd appreciate your assistance.
Thank you
Louiza

Hi Louiza,
Show us your web.xml and ejb-jar.xml files as well as your
data-source.xml file.
Thanks,
Avi.

Problems with vertical cell borders and the default table style

When laying out tables in Word, I like to use thin horizontal lines (cell borders) and thick-ish white vertical lines. The vertical white cell borders create a subtle negative space that is less cluttered than the typical boxed-in-all-sides style.
Issue 1.
In Pages, horizontal cell borders seem to take precedence over vertical cell borders so my vertical white line trick doesn't work. Is there a way to force my vertical white cell borders to "show up" over my think black horizontal cell borders?
Issue 2.
So, for the time being, I'm not using vertical white cell borders in tables; instead, I set the vertical cell borders to "none." Unfortunately, when I try to set the default table style using a table with no vertical cell borders, Pages adds the vertical cell borders anyway. Does anyone know a way to get Pages to surrender?
Message was edited by: Steve in Seattle

I must apologizes.
It seems that I didn't understand well the problem.
Issue 1.
In Pages, horizontal cell borders seem to take precedence over vertical cell borders so my vertical white line trick doesn't work. Is there a way to force my vertical white cell borders to "show up" over my think black horizontal cell borders?
NO
Issue 2.
So, for the time being, I'm not using vertical white cell borders in tables; instead, I set the vertical cell borders to "none." Unfortunately, when I try to set the default table style using a table with no vertical cell borders, Pages adds the vertical cell borders anyway. Does anyone know a way to get Pages to surrender?
I checked and here, aftere defining a new default format with vertical lines set to none, this format is used when I cvreate a new table.
But the same with horizontal lines doesn't apply.
_Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (from FRANCE mardi 28 avril 2009 22:31:45)

I have a problem with my Internet Security and the new Firefox, where can I get the previous version which I had before my system crashed?

Hi I use CA Internet Security Suite which checks ALL pages and searches, but it does not work with this version, also I wish to use Goggle Toolbar which ALSO does not work with this version where can I get the previous version? As my harddrive crashed I have had to install windows 7 and this version doesn't seem to allow me to change my homepage, why is this? Cheers Ernest

You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Problem with an unavailable server and the "Offline address book" rol

Similar Messages

Maybe you are looking for