Problem with App catalog this action could not be completed

I have not been able to use App catalog since a few days.
I am in UK on O2 network using US unlocked Pre2. It was possible to use App catalog and install free apps only. Now App catalog always load with error: " this action could not be completed, please try again later".
Post relates to: Pre 2 p102una (Unlocked NA)

@ rufat_j and @alfagtv100:
Could please send me a private message containing the palm profile account, IMEI, serial #, carrier used, and country for those phones. This information can be found in the device info app.
Please also tell me if you do have any homebrew applications installed or not, apps installed from other sources than the app catalog. This can greatly help.

Similar Messages

BUG: This action could not be completed. Try again later.

In trying to update the app, "Foursquare (Now)" via Preware, I am encountering the error, "This action could not be completed. Try again later." I previously had installed this app, which ran normally. I was updating the app with the newest version when I encountered this error. I uninstalled the app, then attempted to reinstall it, but it gave the same error (and now I do not have even the prior version running).
I have had no other difficulty installing homebrew apps and app store apps via Preware.
I'm on a Pre running WebOS 1.4, with 5.4 GB free.
A little help?

Hello thonght and welcome to the forums;
Each phone is associated with a specific country. The country is assigned automatically the first time a Palm profile is created on the phone. The App Catalog apps you can access are based on the country associated with the phone.
Phones associated with the following countries or regions can use App Catalog to purchase apps and to download free apps:
Canada; Germany; Ireland; Mexico; Spain; United Kingdom; United States
Phones associated with the following countries or regions can use App Catalog to download free apps only:
Australia; Austria; Belgium; China; Czech Republic; France; Hong Kong; Italy; Luxembourg; Netherlands; Norway; Poland; Switzerland
As Vietnam is not a currently supported country for the App Catalog, this is likely why you are unable to access any applications.
I apologize that this is not an answer that will correct the error you are seeing, however I hope this has been helpful.
TreoAide

App Catalog ERROR "The action could not be completed. Try again later" Yellow exclamation mark

Hello, I have problem with access to App Catalog, when i try to access to App Catalog it's give error "The action could not be completed. Try again later" with yellow exclamation mark. I tried to make partial erase, I made full erase, I made Secure erase, but all these steps not helps.
I renew my firmware with latest webOSDoctor, but still nothing. Then I changed my Palm Profile, I create new one, but still NOT WORKING!
I checked all connections 3G and Wi-Fi, everything is ok, but App Catalog still not working.
So, I contacted with Palm Support, I told about this issue and I send them Quick Log and Log
with Description to [email protected]
Reference number for chat: Chat session ID number 89786521
Do you have any solution?
Best regards
Rufat Jalilov
Post relates to: Pre 2 p102una (Unlocked NA)

Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
I really appreciate the attention rendered by the support services, I just need that everything works fine.
I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
So, I will wait for a few days, will see what's happening.
Best regards
Rufat Jalilov

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

The action could not be completed. Try again later when try to update apps

Hi there,
Today I did run the update utility in my unblocked Palm Pixi Plus. I got the message that updates are available for most of the apps I have installed. When I hit on show updates, I can see the list of updates but after a few seconds I got the following message: The action could not be completed. Try again later.
My Palm webOS version is 1.4.5
Unfortunately, I just realized that online support chat was discontinued, it helped me a lot before.
I appreciate I find a fix in here.
Thank you in advance,
Luis.

Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
I really appreciate the attention rendered by the support services, I just need that everything works fine.
I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
So, I will wait for a few days, will see what's happening.
Best regards
Rufat Jalilov

When I try to buy an app from the store with iphone5s it says purchase could not be completed

When I try to buy an app from the store with iphone5s it says purchase could not be completed try this site for support.

Is the name address on your iTunes account in exactly the same (format and spacing etc) as on your credit card bil. You could try what it suggests on this page : http://support.apple.com/kb/TS1646 - and if that doesn't fix it try contacting your card issuer :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
If they say that it's ok from their end then you could try contacting iTunes support and see if they know why : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down and dont work anymo

I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.

TS3297 I keep getting a message when trying to download apps saying your purchase could not be completed contact apple store. What can I do to resolve this?

I keep getting a message when trying to download apps saying your purchase could not be completed contact apple store. What can I do to resolve this?

You will need to contact iTunes Support, which you can do so via this link and ask them why the message is appearing (we are fellow users on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me?, I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me? Thanks...

I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me?, I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me? Thanks...

Apple does not support downgrading iOS levels.

This purchase could not be completed please select a different payment method

I`ve bought a new BB as a present to my wife - Z3.
I`ve registered for her new BB ID account - **Removed**@dunaeva.su
And we can not purchase anything having the same problem using all of our cards - "this purchase could not be completed please select a different payment method",
I`ve read a lot of forums and web pages and belive that our problem - ur sistem has flagged her account as potentially Fraudulent or Blocked.
U shold unblock her and bring ur appoligise.
Edit: Email removed. At no time should you provide any personal information to any other community member. Please review the Community Guidelines and Terms and Conditions of Use. for further information

I apologize for the rudeness of my first post - i was really disappointed with the situation when i`m not able to provide to my wife fully equipped phone with all her contacts and sms (need some paid app). I`ll check up your recommendations and come back with a report or new questions.

Help! HDMI adapter sometimes works, sometimes not. "This operation could not be completed."

Hi,
I bought an HDMI adapter/cable, and I have trouble playing iTunes-purchased videos when connected to my iPad 2. 90% of the time, I'll plug it in and see my iPad mirrored exactly on the TV. But when I try to play an iTunes TV show, the video screen will close and display: "This operation could not be completed." I can play non-iTunes videos and shows just fine on the TV, though, so I know it's not really a problem with the adapter/cable.
I fiddled around with it, and 10% of the time the iTunes TV shows magically start displaying on the TV. If someone walks by and accidentally unplugs the cord, though, it'll stop playing iTunes purchases when I plug it back in. I have no idea what actions or combination of actions cause the iPad 2 to suddenly play the videos.
I've tried everything. Restarting the iPad 2 with the adapter in, restarting the iPad 2 with the adapter unplugged, changing cable positions, etc.
I even tried to swap out the HDMI cable, but the same thing happens with another brand new HDMI cable. Funnily enough, my iPhone 4s plays ALL purchased TV shows fine on the TV without a single hiccup. My iPhone 4s and HDMI adapter/cable get along really well . This problem is specific to my iPad 2.
Any clue how to remedy this? Thanks!

I see no one has addressed this issue. I'm having the same problem but no one seems to have an answer. Did you ever get this issue resolved Joe?

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

This Operation Could Not Be Completed...No Video

So I'm getting this error message "This Operation Could Not Be Completed...No Video" when trying to Log and Capture some footage from a mini DV tape.
I've tried this on my Macbook Pro, 10.5.8, Final Cut 7
I've tried this on my Powerbook G4, 10.4.11 Final Cut 5
I've tried to capture the footage directly into both machines and via external drives.
My deck is a Sony PD170. After getting this message I tried another tape on both machines. No problem capturing this footage. This tells me it is not a firewire issue.
Is it possible that this is a tape/capture setting I'm missing? I've used every NTSC setting possible.

Not familiar with this camera, but here are a few questions/ideas
When you play the tape in the camera, can you see the tape settings displayed on the camera's lcd? This may be a menu setting or a button push. What exactly are the settings?
Was the tape shot on this camera? Sometimes, there can be compatability problems with material shot on a different camera. I think some cameras will playback dvcam material via the video outs but not via firewire, Could this be the problem. I have some memory that there may be other formats some cameras will playback via video out but not firewire.
Hope this is of some help.

This operation could not be completed as there is no video - capturing PAL

Ok, I tried all the suggestions I've seen here. I have a Sony FX-1000 and I'm trying to capture a PAL mini-DV tape (which is easily read and played on this camcorder) using Final Cut Pro - latest version. The connection is iLink / Firewire 800 and has been used to capture many NTSC videos in the past. I have tried all settings on Final Cut Pro - under Capture Settings - to no avail.
In all cases, "Preview Disabled" is displayed in the color-bar window. However, the playback controls (rewind, play, ff) all work fine using the buttons under the window. The miniDV plays fine on the camcorder - both picture and sound.
After starting the playback, and pressing "Capture Now", I get a solid black window indicating that the capture software is "waiting for timecode", even with the tape obviously playing. After about 2-5 seconds, I receive the error message "This operation could not be completed as there is no video".
I've tried several computers, several cables (both Firewire 400 and 800) - as well as all the PAL settings and FC Pro and FC Express 4.0. So, any suggestions? I could use some help.
Thanks

Solved the problem. I used an old Sony Handycam DCR-HC28 with Firewire connection and used Final Cut Express with the settings: PAL, DV-PAL DV Converter in Easy Setup.
I was NOT able to control the Handycam with this setting but I could start the capture and then press "play" on the Handycam and it captured. Strange way to solve the problem. Hope this helps someone.
BTW - the HDV FX-1000 did not work this way. I guess the cheap camcorder works better at this!
Thanks to all for the help!

Problem with App catalog this action could not be completed

Similar Messages

Maybe you are looking for