Problem with applescript for Numbers

I am new to Applescript and am haveng problems with what seems to be a pretty simple task.  I want to check the value of each cell to test for a certain condition and then based on the results increment another cell.  I keep getting the following error:
error "Numbers got an error: Can’t make {4, 5} into type integer." number -1700 from {4, 5} to integer
Here is my script:
tell application "Numbers" to tell document 1 to tell sheet "Sheet 1" to tell table "Table 1"
          set fNineStart to 4
          set fNineEnd to 12
          set bNineStart to 14
          set bNineEnd to 22
          repeat with irow from 8 to 40
                    set skinscount to 0
                    repeat with jcol from fNineStart to fNineEnd
                              set minscore to value of cell (jcol & 5)
                              if value of cell (jcol & irow) is equal to minscore and the value of cell (jcol & 6) is equal to 1 then
                                        set skinscount to skinscount + 1
                              end if
                    end repeat
                    set the value of cell (27 & irow) to skinscount
          end repeat
end tell
Here is the spreadsheet:
Name
1
2
3
4
5
6
7
8
9
Front
Nine
10
11
12
13
14
15
16
17
18
Back
Nine
Total
Net
ESC
score
Skins
Par
4
4
4
5
3
4
5
3
4
36
4
5
3
4
5
3
4
4
4
36
birdie
3
3
3
4
2
3
4
2
3
27
3
4
2
3
4
2
3
3
3
27
eagle
2
2
2
3
1
2
3
1
2
18
2
3
1
2
3
1
2
2
2
18
low score
3
4
4
3
3
4
5
3
4
4
4
3
4
5
3
4
4
4
# of people with min.
1
3
1
1
1
2
4
1
2
16
2
1
2
3
3
2
1
4
2
Skins
HCP
Joe
y
3
3
4
5
5
3
4
5
4
5
38
5
5
4
4
5
3
4
4
5
39
77
74
Bill
y
7
5
4
5
5
4
4
5
4
4

Hi fairchild.bill,
Real experts will I hope chime in, but I think one problem is the way you are referring cells:
Instead of:
value of cell (jcol & irow)
I think you need to use something like:
value of cell irow of column jcol
And
value of cell jcol of row irow
Studying examples of scripts for Numbers 3 at macosxautomation.com may give you some ideas on this.
SG

Similar Messages

  • Help with AppleScript for Numbers - please!

    I posted a question on the AppleScript section, if anyone can help...
    https://discussions.apple.com/thread/3451760
    Thanks!
    (I'm trying to get an array into what I know of in Excel as a "range". How can this be done with numbers?)

    Does this help?  This would work if tagValues in your script is a single value.
    tell application "Numbers" to tell document 1 to tell sheet 1 to tell table 1
              set selection range to range "B2:D5"
              set tagvalues to 1
              set value of cell in selection range to tagvalues
    end tell
    If tagValues is a list, you may have to set each cell separately, indexing through each value in tagValues.

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • Problem with mail for exchange after update on E72...

    Hi everyone,
      I updated Nokia E-mail to ver 3.9 on E72. Now I am facing  a problem with mail for exchange. I have configured gmail on mail for exchange. I recieve a warning that "unable to sync contact administrator if problem persist". It started to pop up just after the update was over and is very frustrating. Even previously i used to recieve mails instantly but now it generally takes half an hour for me to recieve them. I deleted and created mail for exchange several times but to no avail.
    Also i am not able to automatically recieve mails other emails which i have configured. every time I have to manually download them everytime.
    Can anybody suggest a way out.
    Thanks
    Anil

    It could be a problem if you're using your network's connections...
    I was on a Pay & Go tariff with o2 some time ago, and needed secure connections for various things, o2 told me they didn't provide secure connections on Pay & Go tariffs...
    Could be worth checking with them to make sure it's supported.
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • Problem with facetime for mac

    hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??

    Thanks, Dah•veed.
    I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
    However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law.  It doesn't matter who initiates the call.
    As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
    The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
    Now I just need to figure out what...

  • Problem with Twitter for Mac notifications

    Hello,
    I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
    Thanks in advance.

    Solved by
    Dr.AvituvOct 20, 2014 11:09 PM
    go to Terminal and post this:
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
    if it doesn't have that specific directory try this:
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
    once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
    when you're back, go to Apple>system preferences>extensions.... guess who's there.
    I hope it helped.
    The Doctor.
    iMac, OS X Yosemite (10.10)
    To restore Actions extensions for good and other stuff
    THANKS!

  • Problem with GarageBand for iOS 6/7 Iphone 3gs / 4

    Problem with GarageBand for iOS 6/7 Iphone 3gs / 4
    Hello,
    On February 16, bought the GarageBand for iOS which was free and so I find and install it on my 3GS .
    Take the demo: Curtain Call Demo
    and within the instruments :
    audio Recorder
    Sampler
    Smart Drums
    Smart Strings
    Smart Bass
    Smart Keyboard
    Smart Guitar
    Keyboard
    Drums
    Guitar Amp
    1.4.1 is the latest version for ios 6.
    Configure my AppleID on a Iphone 4 and install the program , the version I have the Iphone 4 is the orange ( different from 3gs ) icon and put it on the AppStore : ios 2.0.1 for ios7.
    With these instruments :
    audio Recorder
    Sampler ( to download the instrument )
    Smart Drums ( to download the instrument )
    Smart Strings (Download the instrument )
    Smart Bass ( to download the instrument )
    Smart Keyboard ( to download the instrument )
    Smart Guitar
    Keyboard
    Drums
    Guitar Amp ( to download the instrument )
    and if I give what I need to restore tells me if I bought it I did not restore anything and tells me to buy :
    Complete collection of GarageBand instruments and sound at a price of : € 4.49
    As they are 2 different versions ? More than anything I say because I have to pay for the instruments in the 2.0.1 version of the Iphone 4 ... ?
    And besides not wearing demo Demo Curtain Call : (
    GarageBand 1.x If you are upgrading it using iTunes on a Mac or PC, you can restore the original collection of instruments and sounds. There is no need to buy this collection. Press "You've already purchased?" When displayed on iPhone, iPad or iPod touch.
    this puts on the AppStore but I have tried to restore as I wrote above, and does not work. There is nothing to restore.
    regards

    I've been having the same problem. However, I believe my problem is due to the 3G issues I've been having. I don't have internet access even when the 3G symbol appears, so probably my iphone keeps trying to connect to the network and has its battery drained! Have you been having the same issue?

  • I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

    i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

    i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

  • Stacked 100% bar chart - Problem with datatips for zero value data points

    I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
    data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
    Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
    Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
    <?xml version="1.0"?>
    <s:Application
    xmlns:fx="
    http://ns.adobe.com/mxml/2009"xmlns:mx="
    library://ns.adobe.com/flex/mx"xmlns:s="
    library://ns.adobe.com/flex/spark"creationComplete="initApp()"
    height="
    1050" width="600">
    <s:layout>
    <s:VerticalLayout/>
    </s:layout>
    <fx:Script><![CDATA[ 
    import mx.collections.ArrayCollection;[
    Bindable] 
    private var yearlyData:ArrayCollection = new ArrayCollection([{month:
    "Aug", a:1, b:10, c:1, d:10, e:0},{month:
    "July", a:1, b:10, c:10, d:10, e:0},{month:
    "June", a:10, b:10, c:10, d:10, e:0},{month:
    "May", a:10, b:10, c:10, d:0, e:10},{month:
    "April", a:10, b:10, c:0, d:10, e:10},{month:
    "March", a:10, b:0, c:10, d:10, e:10},{month:
    "February", a:0, b:10, c:10, d:10, e:10},{month:
    "January", a:10, b:10, c:10, d:10, e:10}]);
    private function initApp():void {}
    ]]>
    </fx:Script>
    <s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
    <s:layout>
    <s:HorizontalLayout/>
    </s:layout>
    <mx:BarChart id="myChart" type="stacked"dataProvider="
    {yearlyData}" showDataTips="true">
    <mx:verticalAxis>
     <mx:CategoryAxis categoryField="month"/>
     </mx:verticalAxis>
     <mx:series>
     <mx:BarSeries
    xField="a"displayName="
    aaa"/>
     <mx:BarSeries
    xField="b"displayName="
    bbb"/>
     <mx:BarSeries
    xField="c"displayName="
    ccc"/>
     <mx:BarSeries
    xField="d"displayName="
    ddd"/>
     <mx:BarSeries
    xField="e"displayName="
    eee"/>
     </mx:series>
     </mx:BarChart>
     <mx:Legend dataProvider="{myChart}"/>
     </s:Panel>
     <s:RichText width="700">
     <s:br></s:br>
     <s:p fontWeight="bold">The problem:</s:p>
     <s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
     <s:br></s:br>
     <s:p fontWeight="bold">For example:</s:p>
     <s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
     <s:br></s:br>
     <s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
     <s:br></s:br>
     <s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
     <s:br></s:br>
     <s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
     <s:br></s:br>
     <s:p fontWeight="bold">Challenge:</s:p>
     <s:p>How can we hide/remove datatips for zero value data points?</s:p>
     <s:br></s:br>
     </s:RichText></s:Application>

    FYI.
    Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.   
    Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
    http://bugs.adobe.com/jira/browse/FLEXDMV-2478
    Which is a clone of a similar issue with Flex 3 ...
    http://bugs.adobe.com/jira/browse/FLEXDMV-1984

  • I have problems with office for mac  screen resolution, specially with excel

    I have problems with office for mac  screen resolution, specially with excel ?

    For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
    We are talking about Office:Mac 2011, right?

  • Please Help?! Problems with Viber for iPhone 4s

    Please help!
    I have had problems with Viber for a while now and had given up! But now a few contacts only have viber and not other free messaging apps so I’m trying to use it again but still having problems.
    I have uninstalled and reinstalled a number of times and still have not received an access code. My main problem though is the messaging it would work fine and then I wouldn’t be able to send any messages and I would receive a message go into the app and the message would not appear.
    The other day I reinstalled it whilst at work and worked perfectly could send and receive messages easily. Then when I went home the problem stated again. I then uninstalled and reinstalled again and it worked perfectly, but now back at work I’m having the issues again! I can’t keep uninstalling and reinstalling is there a way this can be fixed?!
    If anyone is able to help me out it would be much appreciated! Thanks

    You activated "Find My Mac," which disables the built-in Guest account and adds a Safari-only "Guest User" pseudo-account. To get the Guest account back, you would have to disable FMM.

  • We have been having a problem with newsletters for a client. The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!

    We have been having a problem with newsletters for a client.
    The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
    This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.

    Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones

  • Problem with RpClean for Rep Development 3.0.L.0

    Hello Forte Users :
    We are running Forte 3.0.L.0 we previously upgraded from 3.0.J.1, 20
    developer workspaces and a repository for both development and
    deployment.
    We are facing problems when we run an Rpclean for this Development
    Repository, this process aborts with a fatal error message, the log
    screen for this process issues the following messages
    the deletion objects is made,
    the repository compress is made,
    the rebuild of the index is made,
    but then when the process is creating back the repository it displays
    "fatal error" and issues a message that it cannot truncate the .btx
    file.
    the command executed is :
    rpclean -n Desarrollo -fr :/var/forte/repodesa -t /var/jaeb
    Any experience on this regard?. If any, would be highly appreciated.
    Jorge
    Do You Yahoo!?
    Get your free @yahoo.com address at http://mail.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Jorge,
    How big is your repsitory. Because if you are running on Digital Unix
    you will have problems, when the repository is bigger then 1 gigabyte!
    During the rpclean process a 'copy' is build and the unix system cannot
    handle more than 2 gigabyte. I expect the maximum size of the repository
    will be different for each operating system, but this might be your
    problem!
    Hans van Drunen
    Origin DeskTop Business Solutions Rotterdam
    Admiraliteitskade 60, 3063 DC Rotterdam
    Telefoon : +31 10 - 242 81 00
    Fax : +31 10 - 242 81 81
    -----Original Message-----
    From: Jorge Espinoza [mailto:[email protected]]
    Sent: Wednesday, June 16, 1999 18:17
    To: [email protected]
    Subject: Problem with RpClean for Rep Development 3.0.L.0
    Hello Forte Users :
    We are running Forte 3.0.L.0 we previously upgraded from 3.0.J.1, 20
    developer workspaces and a repository for both development and
    deployment.
    We are facing problems when we run an Rpclean for this Development
    Repository, this process aborts with a fatal error message, the log
    screen for this process issues the following messages
    the deletion objects is made,
    the repository compress is made,
    the rebuild of the index is made,
    but then when the process is creating back the repository it displays
    "fatal error" and issues a message that it cannot truncate the .btx
    file.
    the command executed is :
    rpclean -n Desarrollo -fr :/var/forte/repodesa -t /var/jaeb
    Any experience on this regard?. If any, would be highly appreciated.
    Jorge
    Do You Yahoo!?
    Get your free @yahoo.com address at http://mail.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Problem with applescript dates from Numbers

    Can anyone explain this to me please?
    tell application "Numbers" to tell table 1 of sheet 1 of front document
              set value of cell ("C2") to "=NOW()"
              set nowDate to (value of cell "D2")
      log nowDate
    end tell
    results in 
    26 Mar, 2013 5:10 PM
    appearing in cell C2, but the log tells me
    (*date Wednesday, 27 March 2013 6:10:14 AM*)
    I realise that the date formats will differ - and  one of Yvan Koenigs's useful postings explains that when we extract a date from a Numbers table we get a UTC date time value. He also showed how to get rid of  that problem with the formula :
    ="" & ref_to_date_time_cell
    But the UTC time when I obtained the above result  was 4:10 am on 26th March,  not 6:10 am on 27th March.  Why is this?
    Incidentally, is there a better way of putting the current date into an applescript variable?

    If your local time is 5:10 PM on the 26th when the UTC time is 4:10 AM on the 26th, your local time is apparently 13 hours ahead of UTC. Therefore, if the UTC time were 5:10 PM on the 26th, your local time would be 6:10 AM on the 27th. There is nothing inconsistant here. Numbers' value is a local time, but AppleScript thinks it is UTC and converts it.
    In general, the current date command in AppleScript would be the best way to put the current date into an AppleScript variable; no need to involve Numbers:
    set nowDate to current date
    (See the Miscellaneous Commands section of the Standard Additions dictionary in your AppleScript Editor.)

  • Problem with index of numbers in BSP Front end

    Hello All,
    I am facing the below problem. Request your help.
    Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
    Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
    Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

    Hi Irina,
    If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
    To avoid the buffer influencing the number range, pass
    'X' to the function module parameter: IGNORE_BUFFER.
    This should resolve the problem.
    Cheers,
    Aditya

Maybe you are looking for

  • Nokia c5-03 problems!please help

    hello everyone, please somebody can provide me some valuable suggestions for these problems i m having with my newly bought nokia c5-03, i will be gratefull 2 u all. prob 1:GPS is not working ,it always gives error "WAITING FOR GPS". prob 2:some game

  • I'm Having Problems With My iPod, Is any one else?

    Hi, I was given a 5th Gen. iPod for Christmas which replaced my 3rd Gen. one. I loved my 3rd gen. and had not one problem with it. At first My new ipod was great until I started back at Uni after Christmas hols. which was the point at which i started

  • Converting Word Files with Backgrounds

    I've created a Word file with a background by going to Format/Theme and choosing Slate. When I convert the file to .pdf, it fails to capture the background. Does anyone know how to accomplish this? It is an integral part of the document and I need it

  • Wallpaper in iOS 4

    So in OS 3 you have no wallpaper on the home screen. In 4 you choose one, but how do you go back to no home screen wallpaper?

  • Getting rid of "residual glow"?...

    Can anyone tell me why I am getting a glow that carries onto the next frame of my movie after a component button is pressed? Here's an online example for you to see: http://al-i.anixter.com/TEMP/SCS/copper/mod1/index2.html What you'll want to do is c