Problem with Archive and Install - Second disc won't complete

I'm trying to run an archive and install for my iMac, OS 10.4.11. I get through the first disc fine, but after I put in the 2nd install disc, it gets all the way to the "finishing installation" and then won't move past "running GarageBand Demo Songs Installer Script". it says less than a minute remaining, and the downloading bar is swirling, but there is nothing happening and it hangs here for hours. I've tried reinstalling, but it will only ask me to load the 2nd disk again, and the same thing happens over and over. I even tried a different install disc 2, and the same thing happened. Is there a way to push past this, or start the entire archive and install again? when i reboot to the disc drive with the 1st install disk, it ask me to put in the 2nd disc.
This all started because iTunes was acting up after I got an ipod touch, no prior problems with the computer. Can anyone help?

I've seen this reported before. What some have had some success with is to do a custom install so the second disk is not needed. See BDAqua's tip to someone with the same issue in the Tiger forum.
http://discussions.apple.com/message.jspa?messageID=9959537#9959537

Similar Messages

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Is there a problem with IM and FaceTime as it won't recognise my Apple ID

is there a problem with IM and FaceTime as it won't recognise my Apple ID?

There are reports that iMessage and FaceTime are down.

Trouble with Archive and Install of Tiger 10.4.6

During a Software Update of QuickTime 7.5 I ran into multiple problems:
1. Iphoto would not import from any souce.
2. Safari quit when I used the Bookmark menu.
3. Itunes won't show any graphics.
4. Others I haven't run into yet?
I tried repairing permissions, then I downloaded the Quicktime 7.5 and tried to install, the installation quit.
I tried re-installing Iphoto from my ILife 06 disk, still could not import.
I tried to do an Archive and Install from my Tiger 10.4.6 DVD, the installatiion quit, said retry. I repaired permissions using the Tiger install DVD, the tried to do an Archive and Install again, but it quit during the installation.
Any thoughts would be appreciated.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
How much free space do you have on what size HD?

HELP! Problem after Archive and Install

I need help. I did an Archive and install because I was having problems with my ical not opening. I did the archive and install without checking the "preserve settings" box. I want to know what I need to transfer from either the "previous system" folder that was created when I did the archive and install or a back up I have on a seperate hard drive so that I can get all of my info back (ie: mail, addresses, bookmarks etc.). I am also having problems with some 3rd party software. For instance, when I open password plus I don't have access to all of my saved info.
I am feeling overwhelmed right now and know I am not thinking clearly. Do I just copy and paste from the previous system folder to the new system folder?

No, making an image won't help. There isn't anything you really need to copy from the /Library/ folder unless it's in the /Library/Applications Support/ folder in which case you shouldn't have any permissions problems unless you reinstalled your OS and used a different username and password. In this case you will have to change to ownership and permissions to enable moving the folders. In some cases try moving the contents of the folder rather than the folder itself.

Need help with archive and install

I'm doing and archive and install. The first try was with a defective retail version of OS X Tiger, which did part of the job then stalled. Now I've been able to get a good DVD of this and was able to do an archive and install,although I couldn't check the box to save user settings etc., On the screen it gives me 3 options transfer info from another mac, transfer info from another partition on this mac or do not transfer my info. I'm new to all this, because of the first failed archive and install do I transfer the info from another partition or not transfer at all and find the old folder later on in the process?

Hi D,
I couldn't check the box to save user settings etc.
I think that is due to the partial previous install moving things to a Previous System folder, but not finshing.
Let's see if that's what happened... if you have 2 Macs with Firewire this could be a lot easier.
Oh, do you have a Backup?
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
After quitting DU, look for Terminal in that Menu Bar, open that and type in this...
Wait, let's hear if you have another Mac or Boot Disk first...

I-T unes sharing problem after archive and Install

I did an archive and install / 10.5.2, I dragged my itunes library from a backup into a shared library just like my previous install.
Itunes does not see the library. I did the change location thing, consolidate library and I do see .xml libraries in Finder. I can not access my music.
What am I doing wrong?
Thanks in advance

Sorry wrong forum

Help with Archive and Install

Hi, I just archived and installed OS X today 10.5 and I noticed that there's a folder called previous system. This folder has the same applications that I have on the new applications folder, for example, I had two versions of iTunes, the new one would not read the library so I deleted it and moved the older one to the new applications folder. My question is: Is that folder really necessary? Because it has the same applications that I have on the new one and it's taking up disk space. Is it Ok to delete? or should I just leave it alone?
Thank You for your time

if all your apps are working normally you can safely delete that folder. it's left there just in case something didn't migrate properly.

Problem with downloading and installing apps

When I start download or install new apps after few second whole operation slow down or stop. I have same problem when I start update old version of aplications. Can you please help.
I do not have problem with cnnection to internet.

Try this
Make sure IOS is updated to latest version
(How to update your iOS device
http://support.apple.com/kb/HT4623)
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).

Problem with discdrive and installing snow leopard

Frustration and desperation has settled in! Lets see if i can get some good help from fellow Apple users!
Ok this is the problem:
A few days ago my computer started to crash almost all programs on my MacBook. I would try to get get into Safari for example and it would SLOWLY start up and then after a few seconds into the prgram it give me the error message "This application Safari quit unexpectedly. Mac OS X and other applications are NOT affected. Click to reopen..." Well again it does that with almost all my programs!
So i took it to the Genius Bar in Munich Germany! (im currently here for business) There the representative of apple actually took my MacBook to the back, checked it for any HD damage and looked at it "under the hub", however couldnt find anything wrong with it physically. So he suggested to backup my HD just reinstall Mac OS X again. I asked him for the new Snow Leopard since i didnt have my startup CD there!
Well im at home now and trying to install the System. However everytime i put the CD in it TRIES to start it up (up to 3 times) and then ejects it. Sometimes even it DOES load it up but then it would tell me to install the new system i would have to restart the computer and when i do that the same problem (3 upstart attempts then ejection) happens!!
Now can anyone tell me why this is happening?! On a side note i also tried insert another DVD and CD and BOTH work just fine! I had a similar problem with a previous DVD b4 but the problem was irratic.. meaning sometimes it worked sometimes it doesnt! Any suggestions or do i need a new Discdrive?!

If your MacBook is under warranty have them check the DVD drive. They replaced my DVD drive because it was doing the same thing. Try the following and see if it helps.
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM

Problem with bootcamp and windows xp disc

Hi! I've been using mac for about 3-4 years now and I am fairly acquainted with my Macbook pro.
My problems surfaced 2 days ago when a friend of mine opened it up and changed the harddrive to this: http://www.overclockersclub.com/reviews/seagate_momentus_500gb/
My friend then did a clean install of OS X Snowleopard (not with the OS X-disc that came with my MBP) and all seemed to work fine.
But the problem is that my MBP don't seem to recognize or can't read Windows-installation DVD's. I insert the disc, the MBP reads the disc 2-3 times and then just spits it out. I have tried this with two diffrent Windows XP SP2 discs and one Windows 7 home disc with the same result.
Sometimes though (completely random) it seems to recognize the Windows disc and I can start the Windows installation via bootcamp, but halfway through the installation the disc still ejects.
The funny thing is that I ONLY have this problem with Windows-discs. OS X-discs, media-DVD's and unwritten CD's is no problem at all.
And I have repeatedly "repaired" and "reinstalled" OS X with both the snow leopard-disc and the OS X-discs that came with my MBP but I still get the same result. I have also tried SMC-resetting and doing a "safe start" but it still doesn't work.
So... Halp? :3

Boot Camp forum.
https://discussions.apple.com/community/windows_software/boot_camp

Problem with Resuming and Installing Apps Purchased using Mac App Store

Recently I have been trying to download and install AeroFly FS which I purchased from Mac App Store (17GB) and with my internet connection it take some 4-5 days to download that.
I have 2 problems.
1) Resume download don't work if I happen to reboot my macbook pro for some reason after pausing the download before the reboot. When I reboot and try resuming the download... the resume button changes to install, and the download start afresh, I technically lost all my previous downloaded data.
2) The app was 17GB ( I guess thats the installer), and I had some 25GB left after the download completed. But it gave an error saying while installing that not much disk space. So I moved/deleted many item on my drive and got the disk space to some 37GB Free. But it was still giving the same error of not much disk space.
So, I thought the new avaialable diskspace was not accounted for. So, I rebooted the macbook. And to my agony, I found the roboot wiped out the 17GB installer I managed to download from Mac App Store.
So, far i have wasted almost more than a week trying to download and install this app. Now, I am re-downloading it for the third time.
Any Help will be highly appreciated.
Any Tips on how I can move the installer once it sdownloaded to my external HDD, and where can i find this installer which App store downloads?
Regards,
Sapam

Hi ...
37GB of free space is not enough.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 20% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
OSX Tips Where did my Disk Space go?

Problems with Erase and Install 10.6.4

We were able to upgrade to 10.6.4 and run Time Machine. Then the errors started, like losing access to iPhoto Library and then Mail accounts and Apple was able to help. We have four accounts, Mom and the kids. And suddenly after 90 days the computer starting running really slow, and then stopped. On re-boot nothing starts. So went back to Install disk and Disk Utility only to find the only option is Erase and Install...totally un-bootable. Since we had a recent Time Machine back-up agreed and erased the HD. Then re-started with Install Disk...it gets halfway into it and then gives Error box and says unable to load some support files, and says to re-start. Well I am in the midst of 4 th attempt with no success, always the same error. Any ideas or am I off to the Apple Store AGAIN?!

I keep working at this. I tried to install 10.4 that came with the iMac and it too stops and says it can't finish the install. Ran 10.6.4 Install and same error. So I ran the same install and made sure that it erased and 'Journaled' the HD, ran disk repair and it said all was well. Ran Install and again stopped at 24 minutes till complete with "Unable to Install all support files", ran Disk repair on re-boot, said a node was not erased, so when I ran repair disk, it listed a different node as not erased but said it was repaired. This time I ran custom Install and de-selected all the languages we don't use and deselected 'X11' (needed to run Windows but we don't do that). And now am trying again. DiskWarrior says the Hard Drive is ok, but as there is no system installed it is unable to re-build a non-existent directory. I have also signed in to our wireless network in the obviously mistaken hope that it could 'find' the files needed but I gather I am asking too much. So much for the much touted Snow Leopard OS...I can hardly wait for 'Lion' next

HT3910 Problems with Erase and Install?

I followed instructions from the article "HT3910: Mac OS X v10.6 Snow Leopard: How to Erase and Install." However, at the end of step 2, where it says I should see a message saying 'Installation Successful', my Macbook Pro tells me that the installation failed. I have erased all the contents off of Macintosh HD and have attempted to go through the install step several times with the same results. What could possibly be wrong?

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro

Problems with partitioning and install Grub. Fresh install

All,
First post here. I appreciate any help you can offer.
I am having some problems when installing Arch Linux.
I am installing Arch on a brand new (3 days old) Toshiba SatelliteC655D-S5300 Laptop.
Hot sheet can be found at http://cdgenp01.csd.toshiba.com/content … -S5300.pdf.
I was initially installing from 2011.08.19 x86_64 Core CD but someone suggested using the latest version.
Now I am installing from 2011.11.13 x86_64 CD burned at 4x (the slowest my burner can go).
I am able to complete all steps up to installing GRUB, but it fails to install.
During partitioning I receive a few errors and I believe this is contributing to the issue.
At first I tried automatic partitioning with 100mb boot, 1024mb swap, 10,000mb / and the rest of 320g for /home. Each partition is ext3 except /boot which is ext2.
During the automatic partitioning an error briefly occured: /usr/lib/aif/core/libs/lib-blockdevices-filesystems.sh: line 355: !((partition_flag)): command not found.
After speaking with a friend they suggested manually partitioning and using UUIDs instead.
1) So far I have removed all partitions, rebooted.
2) Partitioned using cFdisk. Bootable 100mb parition, 1024mb swap, 15,000mb primary (/), 3000mb logical (/var), and the rest 300949mb logical (/home).
3) Once I write the changes and quit I reboot.
4)I go back into the installer and complete steps 1-3.
5) Go to step 4 and and then manually configure block devices, file systems, or mount points.
6) I choose the option for uuid and hit ok.
At this point 3 error messages appear at the bottom:
/usr/lib/aif/core/libs/lib-ui-interactive.sh: line 602: local: 'part,' : not a valid identifier
/usr/lib/aif/core/libs/lib-ui-interactive.sh: line 602: local: 'type,' : not a valid identifier
/usr/lib/aif/core/libs/lib-ui-interactive.sh: line 602: local: 'label,' : not a valid identifier
(Screenshot: http://i.imgur.com/OHRKo.jpg)
7) Next it prompts me to add the mount points for each partition set.
8) Select the partition, the mount point, it asks me for label and any additional opts for mkfs.ext3.
9) I leave the label and opts field blank. After selecting ok to the opts field I get the same 3 errors as above:
/usr/lib/aif/core/libs/lib-ui-interactive.sh: line 602: local: 'part,' : not a valid identifier
/usr/lib/aif/core/libs/lib-ui-interactive.sh: line 602: local: 'type,' : not a valid identifier
/usr/lib/aif/core/libs/lib-ui-interactive.sh: line 602: local: 'label,' : not a valid identifier
(Screenshot: http://i.imgur.com/QqkSP.jpg)
I am able to successfully set a mount point and format each partition. But I receive the same set of 3 errors occur for each partition.
10) Once I complete the formatting I proceed to step 8, install bootloader.
It says Generating Grub device map.. This could take a while. Please be patient.
I receivieve the following error on this screen: /usr/lib/aif/core/libs/lib-blockdevices-filesystems.sh: line 355: !((partition_flag)): command not found.
(Screenshot: http://i.imgur.com/B5j4K.jpg)
11) After the error displays it goes to the next screen, before installing grub you must review config file. etc.
12) I hit ok and then :q the config file. Is there a critical change in the config file that I'm missing?
13) After closing the file I select which the boot device where the GRUB bootloader will be installed. My only option is /dev/sda. I hit ok
Then I get the following 2 errors:
/usr/lib/aif/core/libs/lib-blockdevices-filesystems.sh: line 355: !((partition_flag)): command not found
/usr/lib/aif/core/libs/lib-blockdevices-filesystems.sh: line 355: !((partition_flag)): command not found
(Screenshot: http://i.imgur.com/ol840.jpg)
13) Error installing GRUB. See /dev/tty7 for output. Ok
14) GRUB was NOT successfully installed. Ok
I checked out TTY7.
It shows the installer issuing the following commands in GRUB.
1) device (hd0,) /dev/sda
Error 12: Invalid device requested
2) root (hd0,0)
Filesystem type is extf2, partition type 0x83
3) setup (hd0,)
Checking if "/boot/grub/stage1" exists... no
Checking if "/grub/stage1" exists... yes
Checking if "/grub/stage2" exists... yes
Checking if "/grub/e2fs_stage1_5" exists... yes
Running "embed /grub/e2fs_stage1_5 (hd0,0)"... failed (this is not fatal)
Running "embed /grub/e2fs_stage1_5 (hd0,0)"... failed (this is not fatal)
Running "install /grub/stage1 (hd0,0) /grub/stage2 p /grub/menu.lst "... succeeded
Done.
4) quit
I have tried rebooting from here and using the Arch CD to boot into the existing OS but it does not work.
I tried grub-install /dev/sda
I get Probing devices to check BIOS drives. This may take a long time.
/dev/mapper../dm-0 does not have any corresponding BIOS drive.
I have tried going into grub and issuing the same commands the install script did.
Same errors.
I'm afraid I don't have network access at the moment so I can't get a successful /arc/report-issues to run.
I hope I've included enough information to start the troubleshooting.
Let me know if I've missed anything!
Thanks in advance,
-Jason
Last edited by username17 (2011-11-17 22:37:56)

username17 wrote:I get Probing devices to check BIOS drives. This may take a long time.
/dev/mapper../dm-0 does not have any corresponding BIOS drive.
Your drive does not have an MBR to install grub to as it is a GPT disk - which is also not supported under the old GRUB.
You need to create a small partition at the very beginning of the drive (8MB is plenty) and set the "bios_grub" flag. ie the "BIOS drive" your error refers to.
You will then need to install the grub2-bios package following the chroot instructions on the grub2 wiki page here: https://wiki.archlinux.org/index.php/GRUB2#Installation
** Please note that I found the chroot mounts to be outdated - replace "/tmp/install" with "/mnt" **
Your alternative solution is to boot a gparted liveCD and prepare your disk as MBR - this will (most likely) destroy all existing data on the disk.

Problem with Archive and Install - Second disc won't complete

Similar Messages

Maybe you are looking for