Problem with Archiving

when playing around with my archiving option within Aperture, I messed up and saved the library which is almost 2gigs, twice on my Desktop, and library.
PROBLEM: the file is locked and unable to trash because its encrypted
What To Do? To get one of these useless files on my Macbook
Thanks
Drew

Same as you do with any locked file OS X, and there's no encryption involved at all.
Select the item in the Finder.
Hit Command-I to bring an info window.
Uncheck the 'Locked' tickbox.
Trash as needed.
Ian

Similar Messages

Problem with Archive and Install - Second disc won't complete

I'm trying to run an archive and install for my iMac, OS 10.4.11. I get through the first disc fine, but after I put in the 2nd install disc, it gets all the way to the "finishing installation" and then won't move past "running GarageBand Demo Songs Installer Script". it says less than a minute remaining, and the downloading bar is swirling, but there is nothing happening and it hangs here for hours. I've tried reinstalling, but it will only ask me to load the 2nd disk again, and the same thing happens over and over. I even tried a different install disc 2, and the same thing happened. Is there a way to push past this, or start the entire archive and install again? when i reboot to the disc drive with the 1st install disk, it ask me to put in the 2nd disc.
This all started because iTunes was acting up after I got an ipod touch, no prior problems with the computer. Can anyone help?

I've seen this reported before. What some have had some success with is to do a custom install so the second disk is not needed. See BDAqua's tip to someone with the same issue in the Tiger forum.
http://discussions.apple.com/message.jspa?messageID=9959537#9959537

Problem with archiving print lists

Hi all,
we have an issue with asynchronous archive requests.
The archiving of some spool lists fails. Here the error message in OAM1:
Order History
12.03.2010 19:36:10     Request Created
12.03.2010 19:36:10     Asynchronous request started; awaiting confirmation
12.03.2010 19:36:10     Content Repository Reports Error
JobLog:
Job started
Step 001 started (program RSCMSCAJ, variant &0000000023175, user ID XXXXXX)
Error occurred during character conversion
SAP ArchiveLink (error in storage system)
Job cancelled after system exception ERROR_MESSAGE
It gets weird when I reprocess the request in OAM1, because then it works and we have no error message. It feels like when we start 50+ requests, some jobs fail. And if we start archiving of <10 requests everything works fine.
We tried archiving of 800+ spool lists in our QAS system with no problem. So we suspected, that our PRD content server may be broken or something. So we tried archiving spool lists from our SAP PRD system to our QAS content server -> same issue. The only thing left would be missconfiguration in our SAP PRD system but a few weeks ago everything worked fine and we had no issues.
Have somebody faced similar issues?
Regards
Davor

hi,
Sorry i have to answer with questions:
are you archiving spools larger then 2 gig?
can you send use the logs from the content server?
can you check OAM1 if there is more info ( check logging)
Rgds
Nico

Problems with archive mailbox in Outlook, with exchange 2010+2013 co-existence

Hi!
We have an Exchange 2010 environment plus one Exchange 2013 MBX server meant for archive mailbox purpose. (We are going to upgrade to 2013 but with over 20.000 mailboxes it will take som time. Therefore we need to co-exist with primary mbx on 2010 and archive
mbx on 2013 for some time.)
My primary mailbox is on a 2010 MBX server, and I have today given myself an archive mbx on 2013 MBX server.
When I use OWA, both my primary mailbox and my archive shows up and everything works 100% fine!
But when I try Outlook 2010 or Outlook 2013, only my primary mailbox works. The archive mailbox shows up, but generates an error when accessing it:
"The set of folders cannot be opened. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance"
Anyone who knows about this issue? Would we nice to know why it works in OWA but not in Outlook.
Thanks!
Trond Jenssen

Hi，
Please try to recreate a profile to access archieve mailbox.
If it doesn't make sense, also try Uncheck “Download shared folders” and check it again.
If you have any feedback on our support, please click
here
Wendy Liu
TechNet Community Support

Facing problem with archiving object - ISU_BCONT

Hi,
we have to archive Business Partner Contacts(ISU_BCONT) using program REARCH_BCONT_WRITE, as it was not working because FM - CHANGEDOCU_ARCHIVE_OBJECT is rising exception 'WRONG_ACCESS_TO_ARCHIVE'. checked the OSS note 515521 and did the changes accordingly still program is not working. requsting to help.
Regards,
Raghu

Dear Experts,
Problem solved, cannot say solved but yes its not required now as I am having Client Proxy call so it will be a native call to XI and which does not need SOAMANAGER things.
Thank you all for taking your time and writing answers.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]
Edited by: GauravPa on Apr 17, 2010 11:32 AM

Problem with Archive Link and User ID

Dear Experts,
Currently we are attaching documents to business object using archive link feature through T code OAWD.
when user uploaded documents & when we try to search documents with Tr. code OAAD, we are not able to find from whcih User id documents got uploaded.
As per client requirement, we had to find from which user id documents got uploaded as around 10 user id's got authorization of uploading documents against same business object.
Even in individual Tcodes other than tr. code OAAD of business objects where documents are seen, we don't find User Id/Creator name.
any suggestions will be much useful...
Thanks in advance...

The standard archivelink tables (TOA*) do not gather this data. If this is a must have requirement then using single step workflow may give you the ability to capture this data within the workflow logs.
To create this scenario you would enable only the storage scenario "storing for subsequent entry" within the document presettings via OAWS. Then when a document was uploaded it would create a "workitem" that is sent to the agent id. Default will be user if no setting was created in OAWS.
The user would then have to go to their SAP workplace inbox to execute the work item and "link" the document to the transaction.
This scenario is sometimes referred to as "early archiving" by old timers like myself.
It is most often used in Accounts Payable scenarios where a central shared scanner is passing out many work items to a larger group.
From TAO* Tables we can use SAP_OBJECT to Identify Invoices with PO by object BUS2081 or invoices without PO by object FIPP. From the field OBJECT_ID we can match a specific invoice number. BUS2081 shows invoice number + fiscal year as the Object id. FIPP shows Company code + invoice number + fiscal year. The ARC_DOC_ID field gives us the unique document identification string for the scanned image. AR_DATE = the date the work item is completed. This is when the invoice document is “parked”.
A selection from table SWWLOGHIST searching for METHOD SWW_WI_STATUS_TO_COMPLETED and METH_EDATE = to AR_DATE from TOA* Table (26.06.2012) and PARA_VAL_1 = *ARC_DOC_ID* (*aaaakkjdx1ce6yn3e3aacaerb12zi*) will provide output from which you can gather the work item ID.
Select WI_ID then query table SWWWIHEAD for overview status of item.
From table SWWWIHEAD you can gather such information on the work item as the work item creator WI_CREATOR, the work item status WI_STAT, creation date WI_CD, completion date WI_AED, and work item agent WI_AAGENT.
The WI_CREATOR will be the user who "created the workflow item" for your report.
This a the "long way around" to overcome this lack of data being gathered by ArchiveLink documents.
I hope this late answer is helpful for someone.

Problems with archiving and deleting products created in CRM

In the process of deleting products it is my understanding that one should first arhive the product.
Reading the SAP help guidelines I was able to determine that there are various steps for accomplishing this, the first of which being Preprocessing.
While carrying out this step an error was found that the product attempted to be archived could not be processed due to the fact that it was still used as a component to an installed base.
However this is not the problem, once the correction was made I attempted again to carry out the preprocessing but I keep getting the message that the product "will not be checked again in archiving until 30.10.2006".
It seems that somehow the system limits the attempts archive products in a limited period of time.
My question here is:
Is there anything I can do to change this? How can I attempt to succesfully preprocess the product without having to wait for date specified by the message?
Many Thanks in advance,
Pedro Rondó

I was able to delete the product by reading the suggestions on another topic posted. I adhering the solution at the bottom of this post.
However I was still not able to solve the initial problem concerning how to archive the product.
Here's the solution posted by
Nancharaiah Chatragadda
Oct 23, 2006 8:31 AM
Step1:
Go to Transaction code: SE11 provide database table as : COMC_PR_TOOL_REG then click on display Goto Utilities Menu choose create entries in Table contents menu.. and provide
Client: your client number
Programme: COM_PRODUCT_DELETE_SINGLE
User name: u r user name
Exec date: select data
STEP 2
Programe: COM_PRODUCT_DELETE_SINGLE
Then click on execute or F8
It will ask u your
Product name and type all the data..
deselect check box..

Weird problem with archive profile wizard

Hi,
After using the simple archive profile wizard for ages to create
jar files, I suddenly can't use it anymore. Every time I try,
the "Corba profile wizard" runs instead! What's all that about?!
Any help would, as usual, be much appreciated.
Thanks, Rich
null

Rich,
I assume you are using JDeveloper beta (build 184).
I am not sure what is going on, but the problem
can probably be fixed by examining <jd>\bin\gallery.ini
Somehow this file has the wrong association.
Anyhow, I would suggest you upgrade to the
official 2.0 release if you have not done so already.
JDeveloper Team
Rich (guest) wrote:
: Hi,
: After using the simple archive profile wizard for ages to
create
: jar files, I suddenly can't use it anymore. Every time I try,
: the "Corba profile wizard" runs instead! What's all that
about?!
: Any help would, as usual, be much appreciated.
: Thanks, Rich
null

KE30 Problem with archived DATA

Hi,
I archived some information and then I have defined a drill-down report
using a summarization level (not including archived data) but the
report is reading it.
Please if someone can help me. FLAVIA

Please I need help About HOWN can I do a correct archived in PA, because we archived using the object COPAA
Thanks FLAVIA

Strange problem with PP_ORDER with SARA

Hello,
We are facing a problem with archiving of PP_ORDER object.
We archived production orders from 100000000096 to 100000000113 where:
1. Order 100000000113 which was collective order for orders 1..104 to 1..112
2. Order 100000000103 which was collective order for orders 1..96 to 1..102
The case is that subordinated orders was archived with SARA properly and deleted from system. Unfortunately orders 1..113 and 1..103 wasn't archived. They doesn;t exist in archived files.
But when I type 100000000113 in CO02 i have a message "Order is already deleted. Do you want to display the order?". And I can display it despite that this should be archived but isn't.
Also when I try to push 'collective order overview" button in CO02 at order 100000000113 nothing is happened.
Any idea how to do proper archivisation of these two collective orders?
Now If I try to do another SARA PP_ORDER archivisation of orders 1..113 and 1..103 SARA is searching of its subordinate orders, and nothing is found = no archivization.
Best regards,
Michal

The case is that subordinated orders was archived with SARA properly and deleted from system
Check that the archiving sessions finish correctly in SARA -> Management and that the archive data is accesible on the storage system.
Check in the Archive explorer (SARI) that you can find the data, using the archive object and info structure.
The data should have not been deleted if the archiving session had problems during the process.
Regards
Juan

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Archive Link problem with redundant document names

Hi all,
I have a tricky problem in archive link. I would like to attach some different documents to an HR/PD Organisation unit ( objekttyp pdotype_o )
All customizing works fine but the problem is, all documents attached to one busines object ID have the same name ( in this case objectnumber.pdf)
I am not lucky with this issue because the users must be able to see all documents ( via document finder ) attached to the org. unit and all what the users get, is a list of one or more documents with exactly the same name.
In some cases this are about 10 different documents and this issue is a very bad solution because users have to open all attached docs to recognize which one they need.
During the import/check in of the documents via transaction OAAD and OAWD, SAP renames the original document name.pdf into the related object ID.pdf and there is no way to rerename it or influence this process.
I tried to use some scan software with SAP interface but unfort. with the same result because software of this kind use the archive link interface too and cannot influence the process of check in and rename.
Has anybody an idea ( third party software, customer development or something like this ) to prevent this problem and give me the possibility to stay with the original document names or change it after check in?
Thank you in advance
Rayko

How you fix this problem?
I'm with the same problem. Could you help me please?
Edited by: broullon on Jul 16, 2009 5:31 PM

I have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

i have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

I do not recommend reformatting your harddrive and reloading your software. This is a Windows thing. On an older mac it may be difficult to find all your software again.
Best to have greater than 2gig of free space. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(3)
Buy an external firewire harddrive.
For a PPC computer, I recommend a firewire drive.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
(4)
Buy a flash card.

Problems with JApplet, jar-Archive, packages and IE5

Hello!
I have a problem with a JApplet and Internet Explorer 5. I made a jar archive of my classes. The classes are
members of a package. The jar archive also contains images.
The structure of the archive:
com/mycomp/myapp/DemoApplication.class
com/mycomp/myapp/DemoApplet.class
<more classes>
com/mycomp/myapp/images/hp_logo.gif
com/mycomp/myapp/images/test.gif
<more images>
The archive is stored locally in a directory which contains also the html file.
I used the sdk 1.3.1 to compile the classes.
My problem: when I start the html file on NT with IE5, I get the error message below:
I try to create a label containing an icon with:
topLabel.setIcon(new javax.swing.ImageIcon(getClass().getResource("images"+fs+"hp_logo.gif")));It works on Sun with Netscape 4.67 and SDK 1.3.1 installed.
Should I move the images directory inside the jar archive to another place or is the html code not correct?
The error message:
java.lang.NullPointerException
     at javax.swing.ImageIcon.<init>(Unknown Source)
     at com.mycomp.myapp.DemoApplication.initComponents(DemoApplication.java:158)
     at com.mycomp.myapp.DemoApplication.<init>(DemoApplication.java:55)
     at com.mycomp.myapp.DemoApplet.<init>(DemoApplet.java:24)
     at java.lang.Class.newInstance0(Native Method)
     at java.lang.Class.newInstance(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)The html file:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
<html>
<head>
    <title>DemoApplet</title>
</head>
<body>
<BODY LINK="#0000ff" VLINK="#800080" BGCOLOR="#37a1a7">
      <h1>DemoApplet</h1>
      

<SCRIPT LANGUAGE="JavaScript"></SCRIPT>
<COMMENT><SCRIPT LANGUAGE="JavaScript1.1"></SCRIPT></COMMENT>
<SCRIPT LANGUAGE="JavaScript"></SCRIPT>
<APPLET CODE = com.mycomp.myapp.DemoApplet CODEBASE = "." ARCHIVE = "DemoApplet.jar,classes12.zip" WIDTH = 695 HEIGHT = 525></XMP>
<PARAM NAME = CODE VALUE = com.mycomp.myapp.DemoApplet >
<PARAM NAME = CODEBASE VALUE = "." >
<PARAM NAME = ARCHIVE VALUE = "DemoApplet.jar,classes12.zip" >
<PARAM NAME="type" VALUE="application/x-java-applet;jpi-version=1.3.1">
<PARAM NAME="scriptable" VALUE="false">
</APPLET>
</NOEMBED></EMBED></OBJECT>


</body>
</html>Thank you for your help!
Gruesse,
Torsten

seems like it couldn't find the image file... try to give it the absolute path to the file first to see if this is the root of the problem... and then try to find alternative ways to not give it the absolute path...

BC Archive - problem with opening view object based on entity from archive

We have encountered a weird problem with a reusable BC library on different PCs.
Library was imported into a project following steps in section 25.7 of the ADF guide.
A view object was created using some of the entities from the library.
Model tested successfully with view object (using AppModule tester).
Page developed with no problems.
Application copied to a different PC.
BC JAR files set up in lib folder and removed/readded to application model project. When attempting to open view object, get the error below.
However, the View object still tests successfully using the AppModule tester.
The page using the View object still runs successfully.
I believe the problem is that when the archive was originally imported, it was imported from a different location. The Containees tag in the project .jpx file references that path name. But even when I edited the path name, I still could not open the view object. Do we have to remove and redo the import of the library each time the application is copied to a different machine?
Error when attempting to edit View Object:
oracle.jbo.dt.objects.JboException: The following object(s) referred to objects that could not be found:
com.guideworkstv.ibo.webstagemodel.AcctReqForReviewViewObj
com.guideworkstv.ibo.webstagemodel.AcctReqForReviewViewObj
Could not find the following referenced object(s):
com.guideworkstv.ibo.model.webstage.entities.IboAccountRequest
com.guideworkstv.ibo.model.webstage.entities.IboAccountRequest
     at oracle.jbo.dt.objects.JboException.throwException(JboException.java:81)
     at oracle.jbo.dt.objects.JboPackage.loadResolveReferencesXML(JboPackage.java:1397)
     at oracle.jbo.dt.objects.JboPackage.finishObjectsLoad(JboPackage.java:1042)
     at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:972)
     at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:951)
     at oracle.jbo.dt.objects.JboBaseObject.loadFromXMLFile(JboBaseObject.java:2615)
     at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:880)
     at oracle.jbo.dt.objects.JboPackage.checkForLoad(JboPackage.java:451)
     at oracle.jbo.dt.objects.JboPackage.findContainedObjectByName(JboPackage.java:440)
     at oracle.jbo.dt.objects.JboPackage.findObjectByName(JboPackage.java:1999)
     at oracle.jbo.dt.objects.JboApplication.findObjectByName(JboApplication.java:959)
     at oracle.jbo.dt.objects.JboUtil.fileURLToObject(JboUtil.java:510)
     at oracle.jbo.dt.jdevx.ui.JdxJboAddin$1.handleCopy(JdxJboAddin.java:997)
     at oracle.jdeveloper.compiler.CopyTranslator.handledByListeners(CopyTranslator.java:125)
     at oracle.jdeveloper.compiler.CopyTranslator.translate(CopyTranslator.java:263)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildGraph(UnifiedBuildSystem.java:300)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProjectFiles(UnifiedBuildSystem.java:516)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProject(UnifiedBuildSystem.java:609)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildAll(UnifiedBuildSystem.java:666)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.run(UnifiedBuildSystem.java:894)

We have resolved this problem by making sure that all machines have identical paths for both the working and the lib directories. It would be nice not to have to do this though.

Problem with Archiving

Similar Messages

Maybe you are looking for