Problem with ati radeon in 4530s

hi ....i have problem with ati radeon graphic in hp 4530s ....
when i install graphic driver apear black screen and i dont see anything ....
i change windows and load that properly but when install graphic driver black screen apear again..
driver download is corectly i download driver from hp this problom is not from driver..but i dont what's problem
Please Help Me....Thnx
Sorry my english language is weak...:manvery

Nimestä päätellen oletan että oot varmaan suomesta
Eli suomeksi sanottuna osnavi sanoo että ongelma voi johtua liian heikkotehoisesta virtalähteestä, sitä ei voi säätää tehokkaammaksi mistään biosista vaan jos se on alitehoinen pitää hommata uusi tehokkaampi virtalähde. Eli nuo arvot löytyy todennäköisesti sen virtalähteen kupeessa olevasta tarrasta. Se 12 volttia pitäisi olla vähintään 12 amppeeria että se riittäisi kunnolla radeonin näytönohjaimelle. Yleensä 300 wattinen poweri on riittävä, eli siinä tarrassa pitäisi olla maininta ainakin siitä kokonaistehosta, esim total output 300w tai jotain vastaavaa. Vika voi aivan hyvin olla jossain muuallakin, mutta yleensä täällä aina ensimmäiseksi syylliseksi arvellaan virtalähdettä, itselläni kyllä toisessa koneessa radeon 9200se näytönohjain toimii vaikka virtalähde on vain 200 wattinen. Niin ja muuten... eikö olisi helpompaa kysyä neuvoa ensin joltain suomenkieliseltä sivustolta

Similar Messages

Problems with ATI Radeon HD 2600, electrical interference or flickering pix

Problems with ATI Radeon HD 2600, electrical interference or flickering pixels
I have a Macro 8 core purchased just 4 months ago with the ATI Radeon HD 2600. Just started getting what looks like electrical interference or flickering pixels all over the screen. It gets worse and worse to the point where i see and cant work then clears up for an hour and then comes back.
If I change the resolution from 1680x1050 to 1600x1200 everything looks fine and the problem goes away.
Monitor works fine on two other computers, driver is up to date.
Would like to upgrade at some point just disappointed that I’m already having problems.
Any suggestions would be very helpful, in the mean time I’ll searching the forums.
Thanks,

When you called Applecare or went to a Genius bar were they of no help?

Problems with ati radeon 9700

hi there,
since i recently upgraded my board to this helluva rocket... and reinstalled window i was unable to get my ati running stable with the board. it works perfectly with my other computers (p3 1ghz asus board, duron 900 with abit board, p4 2,4 with intel board)
and it has been working for 1 year in that intel board p4 machine.
but with the upgrade to the 875p neo i constantly get vpu recovery with standard catalyst drivers, and texture errors in games with modded omega drivers,
ive been reading about disabling agp 8x and stuff. but the bios doesnt have the option... and no other agp options.... (pretty crappy bios i think anyway...)
did anyone experience similar problems?
cheers
my config is
p4 2,53
875p neo
ati radeon 9700 tx
dual channel 1gb ddr 333

thanks for all the replys... gotta check that all out...
i have not intentionally overclocked my system... gotta take a look at that too...
as far as it goes for problems with the PSU, i got a zalman ZM400B-APS 400 Watt PSU some silent mofu (my machine never was more silent this should be enuff for a 9700 (though i have 3 120gb and one 160gb dvd burner and 9 fans installed (including cpu fan) ) maybe ill turn off some of em... (who needs less than 30degree celsius anyway in a rig...)
regarding reinstall of XP, yes i formatted HD and reinstalled XP then.....
the fresh install is right now waiting for me to return home after work.. lets see how it will work... with the tips you all gave me....
btw i read in another posting that adding your rigs specs is the way to go in here...
by searching the forums for problems with radeon cards cards it delivered all those topics where people have a radeon or 9700 in their specs...
maybe search should have a tick box to exclude or include specs in searches... would make things more convenient for searching and not bothering people with already extensivley discussed stuff...
cheers

Problems with ati radeon powersaving and vboxdrv

Hi
I use an old Laptop with an ATI Radeon Mobility x300:
$ lspci | grep -i vga
01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Mobility Radeon X300]
, Kernel 2.6.36.1 and the latest xorg/radeon packages.
To use the powersaving features, I have
echo low > /sys/class/drm/card0/device/power_profile
in /etc/rc.local. This works as expected, but when I load the vbox-modules on startup, I get the following errors:
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
vboxdrv: counter framework which can generate NMIs is active. You have to prevent
vboxdrv: the usage of hardware performance counters by
vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
AND when after that, when /etc/rc.local is executed:
Uhhuh. NMI received for unknown reason a0 on CPU 0. You have some hardware problem, likely on the PCI bus. Dazed and confused, but trying to continue
If I disable these modules on startup, everything is OK, so it seems that the vbox-driver has something to do with it.
Do I have to worry about this and is there a fix for this problem?
Regards,
drm

Hi
I use an old Laptop with an ATI Radeon Mobility x300:
$ lspci | grep -i vga
01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Mobility Radeon X300]
, Kernel 2.6.36.1 and the latest xorg/radeon packages.
To use the powersaving features, I have
echo low > /sys/class/drm/card0/device/power_profile
in /etc/rc.local. This works as expected, but when I load the vbox-modules on startup, I get the following errors:
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
vboxdrv: counter framework which can generate NMIs is active. You have to prevent
vboxdrv: the usage of hardware performance counters by
vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
AND when after that, when /etc/rc.local is executed:
Uhhuh. NMI received for unknown reason a0 on CPU 0. You have some hardware problem, likely on the PCI bus. Dazed and confused, but trying to continue
If I disable these modules on startup, everything is OK, so it seems that the vbox-driver has something to do with it.
Do I have to worry about this and is there a fix for this problem?
Regards,
drm

K8MM-ILSR PROBLEM with ATI Radeon 9550 of 256MB AGP port 8X...

Hello, I have a motherboard MSI-K8MM-ILSR, when use the onboard video card works correctly, but the problem begins when I install a ATI Radeon 9550 of 256MB, is AGP port 8X and has its dissipator, in other machines it works well and your temperature is ok. My monitor is Samsung Sync Master 793s at 75 Hz. The Problem is the following: the machine crash and the video is distorted and it is congealed, this happens after playing a little, the video card drivers are updated (Catalyst 5,6), I'm use Windows XP Service Pack 1, Thanks... and excuse me my English...

Some other options you can try:
- uninstall the previous vid-drivers and use driver cleaner software to uninstall everything
- disable onboard video in the BIOS;
- set fastwrite to disabled/no (if it's there)
- set AGP Aperture Size to 128 (if it doesn't do anything, go to 64);
- set AGP port to 4x.
- Start hoping .... good luck!
(BTW, the last two options may cause your system to operate slightly slower, but it's hardly worth mentioning ... )

Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
after rebooting it get this crash report from the system :
Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
reteattartPvvl Ili maaliceicdn mchk aiog eproMh
rekroi-MCpor reorrosg-:
porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
20IAA00200_inv0xid
0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
Mo MAA e8atr code inf 00: 0 0x00 St
00s00ode
spSccifsic codr
texr ccorre02sor:
0 8O4x0
r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
8ernc0ro,rrR2: 0xected error
CR3: 0x00e7a000, CR4: 0x000006e0
EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
EFL: 0x00000006, EIP: 0x0019e9c0
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: ST3250820AS P, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
FireWire Device: My Book Device, WD, Up to 800 Mb/sec
here's my complete config if it can help :
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B04
SMC Version: 1.7f8
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
Displays:
SyncMaster:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
S/M 955SL:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
+
francis.t
montreal
Message was edited by: francis.t

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Xorg7 Problem with ATI driver?

After upgrade my X sever crash :cry:
I see a error message saying something like this:
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 4.0.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(WW) ****INVALID IO ALLOCATION**** b: 0x3000 e: 0x30ff correcting
(II) window:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
[0] -1 0 0x00000000 - 0xffffffff (0x0) IX[B]
(II) window fixed:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
Requesting insufficient memory window!: start: 0x0 end: 0xffff size 0xd0220100
(EE) Cannot find a replacement memory range
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0210000 - 0xd02100ff (0x100) MX[B]
This is my xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "xtrap"
Load "glx"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "STN"
ModelName "S/T 77E/76E"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "MergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "BIOSHotkeys" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:4:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

I hada problem with ATI in my xorg 7 and my solution was to change the xorg.conf driver to ...vesa.
I don't know if your card supports fglrx but I suspect it may not and the ati-drivers are for that function.
Just a thought...

PPC G5 with ATI Radeon 9600 Pro monitors not getting signal

hi there.
I have a PPC G5 with ATI Radeon 9600 Pro graphics card and I cannot get a monitor to work properly. I am trying an old Apple Studio Display (circa 2001) and a Viewsonic VA520.
It seems like the Apple display should work, but all I get is a black screen. I ran it through a DVI to ADC adapter and had it working for a short period of time, but for some unknown reason it went back to the black screen.
The Viewsonic gives a 'NO SIGNAL' screen and not much else.
Both of these monitors have worked on other G5's. I am guessing this is a graphics card issue.
I appreciate any kind or helpful words! Thank you.

I'm having a similar problem with the G5 not recognizing a VGA monitor on either video out. I have no problem using two monitors with the DVI inputs but I need to use a VGA video splitter for a third screen. It worked at the beginning of this week, and now it refuses any VGA out, even without the splitter, just going into directly into the VGA in of one of my working monitors via a DVI-VGA adapter(i've tried different ones). I read another post about trashing "displays" and "windowserver" preference files but i haven't yet tried that..any clues??

K7D Master-L with ATI Radeon 7000

Is anyone using K7D Master-L with ATI Radeon 7000? I am not able to use this
combination. When I switch on the power, the screen doesn't show antying. It is just
blank. Even though the monitor doesn't show up, if I don't press any key then the
system goes further till I see all the 4 leds as green and it tries to read from the
floppy drive. However, if I press a key after the keyboard is initialized, then the
d-bracket stops at Testing VGA BIOS. I haven't installed my hard drive at this stage.
MSI support asked me to try with another graphics card. They also suggested clearing
CMOS. I cleared the CMOS and the problem still exists. In addition, now the d-bracket
stops at "Initializing hard drive controller" though I didn't install hard drive. So, I went
ahead and installed my 200GB hard drive and no change. I think, to fix this issue, I
should first be able to fix my VGA issue. Also note that as I can't see the monitor from
the beginning, I don't know what my BIOS version is and if I can flash it with the latest
version.

I just tried with Creative Lab's "3D Blaster Savage4 32MB AGP (32MB SDRAM) " CT6900 which I borrowed from a friend. It didn't work either though this card is supposed to support AGP 2x/4x. I need to see what other cards I can get hold of
and try.
However, as I mentioned, initially the sequence was complete and I could see the 4 leds showing green. But after the advice from MSI tech support to try clearing CMOS for this problem, now the sequence stops at "Initiating Hard Drive Controller" (red red green green). Could this be because the BIOS doesn't know the HDD details after resetting CMOS? If so, once I get my VGA problem resolved will I be able to solve this problem
by entering into BIOS setup? At what stage does the BIOS setup screen show up when I press 'Del' key? If it is after the entire POST sequence then I will be stuck at the hard drive initialization. Also, I read that AMI BIOS supports Ins key which will bypass CMOS setup in the case. Does AWARD BIOS has any such functionality?

Mac Pro 5.1 (Mid 2010) with Ati Radeon 5870, I can't install Maverick, don't support the graphic driver

I have a Mac Pro with Ati radeon hd 5870 1024 MB, after the first reboot in the installation of Maverick, the screen does strange things as if the driver does not support.

Hello pitin,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
You can reset the Mac's parameter RAM and SMC.
Best of luck,
Mario

[Athlon64] Anybody has any experience with ATI Radeon XPRESS 200P chip sets?

Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
I am looking to purchase a computer for my wife who does not require major computing power. And looks like ATI is a cheaper option. Any recommendations?
Any info is greatly appreciated.

Quote from: dannol48 on 23-June-05, 02:25:47
The RS480M2-IL haa a CnQ option in Bios.
Installing the AMD driver and setting the Power Scheme to "Minimal Power Management" in Power Options is required to enable CnQ in XP.
Danno
Hello Danno ^^¿''
Well, I just bought the RS480M2-IL with a Venice 3000+ and 1 GB DDR, I've tested the Video onboard(all the newest drivers installed) with the 3DMARK 2001, and I just can get 3052 ptos...so .. please tell if you has made some time ...and how's your score?
Oh man please tell me...maybe I made a bad choise but I was specting something better from this Mobo!!!...
thanks and enjoy the time
PD: Another thing: my modo comes with the bios ver. 3.4 ...and have "The Normals falis" son I don't really know wich ver, could be better....cya..

Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

After Effects 7 with ATI Radeon X1900 XT

Hi everyone,
I use Adobe After Effects 7 a lot and I'm not happy with my current machine (PowerPC G5 2x1.8GHZ, 2GB DDR SDRAM, ATI Radeon X800 XT), it is too slow to work smoothly when I have several layers and effects going on. Previewing the work on the timeline (OpenGL or Adaptative resolution) is painfully slow and takes on my nerves. I believe this is mainly due to my graphics card, and the fact is not 100% compatible with OpenGL on After effects.
I'm ready to upgrade with a Mac Pro 2.66 GHz Quad Xeon with ATI Radeon X1900 XT, but only if I'm going to enjoy a real improve with After Effects 7, as this is my main editing application right now.
Does anybody have experience with this configuration?
Thanks in advance for reading and replies!
PowerPC G5 2x1.8GHZ Mac OS X (10.4.7) 2GB DDR SDRAM, ATI Radeon X800 XT

I have this configuration, but sadly have had no time to play around with After Effects. AE's realtime playback capabilities are limited (especially when compared with something like Motion), so you're probably still going to be rendering to RAM a lot. I believe the OpenGL support is for things like anti-aliasing, blur, and blending modes -- so a faster video card may not automatically equal huge performance boost across the board. Four Xeon cores and a lot of RAM will help it a lot more (see exception below).
Also, AE 7 still has to run under Rosetta which results in a slower performance than if it was native. Also, be aware that there is a limit placed on all Rosetta processes that do not allow them to address more than 1.5GB of RAM combined. This will most likely limit your render speed and preview lengths. See this thread on Adobe's forums for more info:
http://www.creativecow.net/articles/jonesgraham/AE7_on_IntelMacPro/index.html
EDIT: The above link was to the performance comparisons, but not the original Adobe forum thread. Here it is:
http://www.adobeforums.com/cgi-bin/webx/.3bc2401b
However, if you read the thread, and follow the link in it, the author is seeing huge performance gains with AE7 on his MacPro 3GBs over his old dual G5 4.5GBs.
So most likely, you'll see a performance benefit from upgrading. And when an Intel native version of AE ships, things will really fly.

HP Pavilion p6-2155a (64bit, running Win8.0)- Problem with AMD Radeon HD7450

Hi,
Have noticed various posts re problems with AMD Radeon HD7450.
For several months, I've had problems with my "video hardware causing Windows to stop working correctly". Until yesterday, this was more of a nuisance than a real problem (so I thought). Yesterday, I had my first BSOD, caused by video_scheduler_internal_error.
Today, I downloaded sp59360.exe & installed, as suggested by the HP website. On checking the Device Manager, this driver appears to be older (Version 8.982.10.0, Date 28.8.12) than the one I had previously (Version 8.982.10.6000, Date 18.9.12).
About 30 minutes ago, while away from my computer, I think I had another "video hardware caused Windows to stop working correctly".
Have I done the right thing in installing sp59360.exe? Should I roll-back to the previous driver? What is causing my problems? Is it possibly a faulty card?

Hello @Mazza52,
I understand that you are getting a BSOD error related to your graphics card and are seeking assistance. As you have tried multiple drivers and are still getting the BSOD I think we should do a backup and recovery of your computer to rule out software as being an issue.
To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
If after this you still have the same problem then the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options.
As for the drivers you installed and had installed the Version 8.982.10.6000 driver from what I can see is for Notebook computers and just happened to work for you the driver Version 8.982.10.0 is the one you should have installed.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Imac problem with amd radeon 6970m

I live in Kazakhstan where hasn't got any authorized apple services! But my iMac 2011 has problem with amd radeon 6970m. And i need to repair it but i dont know how to do it! Please help me!

В чем проблема?

Problem with ati radeon in 4530s

Similar Messages

Maybe you are looking for