Problem with attaching/uploading images after editing in Aperture

After I edit images in Aperture, I frequently have trouble uploading them to Flickr or attaching them to an email message because the attachment/uploading tool cannot find the image. When I go to Aperture to view images, the edited image is there; however, it does not appear among the images in the folder where it is stored when I attempt to attach it to an email message or upload it to Flickr. I've tried searching for it by image number and that doesn't help. This never happens to unedited images, only to the ones that have been edited. The issue tends to go away after some time - for example, when I try to repeat the action the following day, the image is "back" where it should be. However, simply restarting Aperture, Flickr, or my browser doesn't help. Obviously, this is extremely frustrating, as I edit virtually all my photos before sharing them. Has anyone experienced this issue and have you been able to figure out a solution? Thank you! Oh, one last note: I've never experienced this issue when editing images with other software, such as Photoshop or Picasa - it only comes up with Aperture.

Welcome to the user-to-user forum.
Aperture creates the adjusted images as needed, on-the-fly, from the adjustment instructions saved in the Version file. Aperture also keeps Previews of these images, both for its own use, and to share with other applications when a lower-resolution JPG is sufficient. That is why you cannot find your images using Finder or other "File→Open" attempts (which is what you seem to have been trying).
(Previews are worth learning about. Consult the User Manual (a/k/a the Help file).)
In order to create a file, you must export your adjusted Version using Aperture.
Any application which has access to the OS X Media Browser (Mail does) can access these Previews.
There is a free utility which gives similar access to all applications: iMedia Browser. It looks good, but I haven't used it enough to comment.
You should also be able to access images of your adjusted Versions via the "Media" category which shows at the bottom of the sidebar of applicable OS X "File→Open" dialogs.
But the easiest way to email a image from Aperture is simply to use the toolbar icon or the keyboard shortcut "{Option}+e". Select an email program and an image exporting preset (which sets the size and other parameters) via "Aperture→Preferences→Export".
Others may have advice for Flickr. I don't use it.
Message was edited by: Kirby Krieger

Similar Messages

  • Problem with displaying BLOB images on JSP page using a servlet

    hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
    Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
    here is one of my image servlet's working versions (the essential part of it) :
                   BLOB blob=null;
              rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
              while (rset.next())
                   blob=((OracleResultSet)rset).getBLOB(2);
              response.reset();
              response.setContentType("image/jpeg");
              response.addHeader("Content-Disposition","filename=42.jpeg");
                    ServletOutputStream ostr=response.getOutputStream();
                   InputStream istr=blob.getBinaryStream(1L);
                    int size=blob.getBufferSize();
              int len=-1;
                    byte[] buff = new byte[size];
                         while ((len=istr.read( buff ))!=-1 ) {
                   ostr.write(buff,0,len);
             response.flushBuffer();
             ostr.close(); and my JSP page code :
    <img src="/ImageServlet" border="0"  > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.

    I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
    here's the magic tag : <img src="ImageJSP.jsp" border="0"  > enjoy : )

  • DW CS3 problem with PNG-8 images in Design View?

    DW CS3 (build 3481) on XP seems to have problems with PNG-8 images, specifically trying to display them in design view.
    I had a very simple image that was able to be exported by Fireworks CS4 as PNG-8 using 4 colors (no transparency) for a tiny file size under 250 bytes.
    DW could not display it at all, or even recognize it, reporting it was 0 x 0 in size. I published the page anyway, and it looked fine in the browser.
    I upped the number of colors to 32, and DW could then display it in design view in the page I was working on.
    I'm still having problems with other PNG-8 images. The attached file "temp.jpg" is a screenshot showing part of the design view in DW.
    The smaller image on the left of the banner is "58_certificate_of_discharge.png" (attached), and the larger image below is used as the background of the DIV containing the form,"compassbk.png" (also attached).
    These images all look fine in the browser, but terrible in DW.
    I'm stumped as to why.
    Thanks in advance.

    According to a different discussion, the images that are stuck as "Queued" are showing a bug in the virus scanning on the forums.
    Now trying the recommended 'camera icon' method...
    Looks like it worked.
    Now compare what it looks like in DW CS3 in the design view:
    It's a 16 color PNG-8 made in Fireworks CS4 with no transparency, size is 113 x 58, ending up at 1.71K.
    If this is a repeatable problem in CS3, is there any hope of it being resolved, or am I stuck with upgrading to CS4 as my only option (assuming it's fixed in CS4)?
    Thanks.

  • I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off,

    good afternoon, I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off, probably warming, but this rare, is suddenly going slow parapadear and image.
    also sounds like when damaged ballasts for lamps,
    ANYONE know what could be the cuasa and / or what is causing this.
    greetings and thanks in advance

    Hi,
    Please write your TouchSmart model number, which system are you using and country of purchase.
    Resource:
    How Do I Find My Model Number?
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Problem with flash on IE11 after using adobe cleaner

    Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
    Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

    I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

    WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
    Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Problem with File Uploading.

    Hi,
    I have one problem with File Upload component.
    JSP
    <ui:upload binding="#{NewProblem.fileUpload1}" columns="#{SessionBean1.uploadedFile}" id="fileUpload1" labelLevel="3"
    style="left: 24px; top: 24px; position: absolute" validator="#{NewProblem.fileUpload1_validate}"/>
    Java
    UploadedFile uploadedFile = getSessionBean1().getUploadedFile();
    Variable uploadedFile is NULL :(((((((((((
    web.xml
    <context-param>
    <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
    <param-value>client</param-value>
    </context-param>
    <filter>
    <filter-name>UploadFilter</filter-name>
    <filter-class>com.sun.web.ui.util.UploadFilter</filter-class>
    <init-param>
    <param-name>maxSize</param-name>
    <param-value>10000000</param-value>
    </init-param>
    <init-param>
    <param-name>sizeThreshold</param-name>
    <param-value>10024</param-value>
    </init-param>
    </filter>
    Thanks.

    check out the fileUpload article
    Using the File Upload Component
    http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/file_upload.html

  • Strange problem with my ipod 2g after upgrade to os 4.2

    Strange problem with my ipod 2g after upgrade to os 4.2
    the problem with volume some times when i switch on the ipod i hear the sound
    alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
    i hope i get help

    I would try in order:
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backu via iTunes.
    - Restore the iPod to factory defaults/new iPod.

  • Problems With FTP Upload in Leopard 10.5.3-4

    Hi, I experience a strange problem with ftp upload speed in 10.5.3-4. When I start upload a file to my trusted ftp server the upload speed starts to decrease from 300 kb/sec to 35 -40 kb/sec. It remains normal for 1-2 minutes (about 300 kb/sec) and then smoothly decreases to 35 -40 kb/sec. Pressing Stop and then Resume in Cyberduck makes speed normal for 1-2 minutes and then it starts to decrease again. It does not depend on ftp-client, it does not matter if I use either Cyberduck, Transmit or Fetch. It happens if I use either ethernet or airport connection. I have my old Powerbook with 10.4.11, it's connected to the same router with the same settings and the same time upload speed remains stable about 300 kb/sec.
    But when I transfer files from my Macbook to my old Powerbook via ftp everything is fine. And when I transfer files to ftp server of my local ISP it's also fine.
    Please, help me, I have to upload big 100 Mb files very often and it's significant difference for me 30 or 300 kb/sec
    Boris

    I'm afraid it's not just the Duck or FTP, Boris....It's many many Apps...and protocols... 10.5 appears to have ;broken',a number of file transfer protocols and Apps... (Wired and KDX are two that come to mind- precisely the same symptoms, AND some others) Apple's own 'built-in' FTP appears OK Mac-Mac, oddly enough.
    There's obviously some kind of weird Copy-Paste problem too.
    It's obviously 'fixable' or a workaround is available because several s/w mobs have released 'fixes for 10.5 file transfer Bug'
    The rest of us will just have to wait while another unannounced,unacknowledged, gaping hole in the Mac OS is quietly fixed and our expensive s/w sits unusable...
    Not really good enough, is it ?
    Like: Not being able to automatically detect a part file transfer on FTP and Auto-resume from whence you left off: something we thought was pretty cool- back in about 1984.... and absolutely essential in 86 or so.
    Boris:You will almost certainly find that it happens whatever the client-server server setup and applications or Medium... I've seen precisely what you describe happen with Airport, Cable, 10/100/1000' local' LAN...
    - and watching your throughput drop from 300K to 300 BYTES/Sec is NO FUN.
    I've spent a lot of time and money convincing potential 'Switchers' of the superiority of the Mac way over the last 20 years or so...
    I'm getting pretty tired at defending the indefensible: 'SkoolBoy Misstakes' in a 24 year old 'superior Computer.- Not Good enough, Apple.

  • Solutions for problems with QuickTime files in After Effects CC (12.0)

    We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components. 
    Please read that post and let us know here on this forum thread if you have any questions or comments. 
    Also, please let us know if the proposed solution works for you.

    Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
    Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
    The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   ???                                     0x04981f90 0 + 77078416
    1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
    2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
    If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

  • How do I save/burn my images,after editing, to a disc and what format JPEG? THX!!!

    How do I save/burn my images,after editing, to a disc and what format JPEG? THX!!!

    You're lacking information. We need to know what software you are using what version it is. What computer system and what version is the operating system.

Maybe you are looking for

  • Image re-use in flex

    Hi, I am trying out FlexBuilder 3 and seeing if I can put together a first project. The layout is in module format, whereby the main application SWF loads modules as necessary. The problem I have is that I am trying to find a tidy way to re-use embed

  • IMac 24" (Late 2006) 10.4.11 constantly needs formatting!

    I have no idea why in the past 6 months to a year my iMac keeps getting more and more problems, and each one more serious. In about a week, I will have had this computer for 4 years, and for the first 3, there has never been the problems I have had i

  • How to use voltage signals as input signals into USB-6211

    Hello everyone, I have a USB-6211 and a PDQ80A -quadrant photo detectot from thorlabs, i am trying to take three voltage signals from the PDQ80A into my PC using USB-6211 from NI. THese voltage signals are X,Y and sum (X+Y).   Looking forward to your

  • Heeeellllp!! someone please

    i dont know if this is the right forum but oh well.. not even 10 mins ago a vertical light blue line showed up down the middle of my screen. does anyone know whats wrong.?

  • App icon has white background

    Hello, Hopefully you can help me with the following problem. If I occasionally update my apps or a new app then install the app icon will have a white background. Can I get hurt ?. See picture for the result.