Problem with Audigy 2 Platinum Front Panel Input

0Problem with Audigy 2 Platinum Front Panel Input? Hey everyone,
Here's the background of the issue. I got a PS3 over the holidays for literally free
I had my computer out in a testbed style. Plugged the PS3 into my monitor HDMI --> DVI cable, and Red/White into the front RCA jacks of the Front Panel (Aux 2). As soon as I plugged in the cable, I got sound out of my speakers and was able to enjoy my PS3 in 720p
I put all of the components back into the case after cutting exhause and intake fan holes. I brought everything back to school, fired up the PC and PS3. Lo and behold, there is no more sound from the PS3. I know that PS3s are temperamental in moving, but I hooked the audio up to my TV and the sound came out just fine. The AD Ext cable looks like it's secure and in place. When I hooked up a mic and headphones to the front, they worked fine as well. However it seems to be just the AUX 2 RCA inputs that dont work anymore. Any ideas about how to fix this issue? Is there a function I have to turn on now in the software to allow sound to pass through? Any information would be wonderful!? I'm going to try an optical cable in the near future, just need to borrow one from a friend =/

Problem Solved.
I had moved my cards around for better airflow. I moved the SB Audigy card from the bottom PCI slot to the top. Thinking this might be the problem, I moved the video card back to the top slot PCI-E and the sound card to the bottom PCI slot. Sound is now working again. Thanks for the thread views?:smileytongue:
Think that when I have to buy Win 7 for real if the problem would still persist if I moved the card again? Or is this a hardware limitation?

Similar Messages

Problems with Audigy Platinum and Firew

Hi,
I've been running my Soundblaster Audigy Platinum on my Win2k-System for some years and have just encountered some weird problems with the Firewire-Connector. When I connect an external DVD-Burner everything works fine. But when I connected an external harddisc for the first time recently, the system completely flipped and rebootet without any messages. When I connected the dri've via USB it wasn't recognized automatically (what it should have after the manual) but after installing the Drivers on the Disc. Afterwards also the Firewire-connect was possible, the dri've was recognized and appeared in the Explorer. So far so good.
But now, everytime I try to copy files larger than some Megabyte the dri've stops copying and I get an error message. Then the dri've disappears in the explorer. When I connect the dri've to my Laptop (XP Pro System) everything works fine. I already tried to google the problem and found some users with the same problem, unfortunately no answers to their posts. Is there someone who can help me (us)?
By the way, I already tried to re-install the drivers for the audigy...

hi kakarocht, tks for help me.
My mobo is new, i buy all the config recently.
i'm searching in the forum, and found this topic https://forum-en.msi.com/index.php?topic=85631.0
my HD SATA is the same of this, i will try to remove it, and then tell here for you.
sorry for my english again.

Sound problems with audigy platinum after software upgra

After updating software (and then deleteing and redownloading) I had the usual sounds from windows but no sound in other programs. The eax environment was turned to no effects. When I added effects there was then sound. This would be OK in games but is annoying when listening to news broadcasts on AOL.
Any ideas?

Well now I'm confused alright. I told you I took out the TV tuner and everything seemed fine. Wrong! The system froze again while playing a DVD movie this time. Naturally I thought about the graphics card which is an Albatron FX 5200 (yes one of those about which NVidia appologised for their technical problems). So I opened the case and took the graphics card out and it was hot! I mean you could fry eggs on it. I checked the system's temperature and I got 58 degrees Celsius for the mainboard. I forgot to mention that I live in Greece and the atmosphere's temperature now is between 29 and 35 degrees celsius. Then I rememberd reading that the new FX series by NVidia are considered very bad graphics cards and besides everything they have cooling problems. So I stuck in my old graphics card (ASUS GEforce Ti 4200) and mounted an additional cooler fan on the case. Now the mainboard's temp doesn't rise over 49-50 degrees Celsius and until this time I haven't had any freezes. My guess is it wasn't the tuner after all. It was a temperature problem and since I'm working with programs that stress the CPU and Audigy to their limits (multiple music sequencing and audio mixing software) I have a good reason to believe that. So the FX 5200 is most likely to have caused it all. Needless to say that besides the extreme temperature the card has crappy performance as well no matter the 128 MB of RAM. I just hope I won't need any more fans to be able to work.

Problem with Set/Get volume of input device with single channel

from Symadept <[email protected]>
to Cocoa Developers <[email protected]>,
coreaudio-api <[email protected]>
date Thu, Dec 10, 2009 at 2:45 PM
subject Problem with Set/Get volume of input device with single channel
mailed-by gmail.com
hide details 2:45 PM (2 hours ago)
Hi,
I am trying to Set/Get Volume level of Input device which has only single channel but no master channel, then it fails to retrieve the kAudioDevicePropertyPreferredChannelsForStereo and intermittently kAudioDevicePropertyVolumeScalar for each channel. But this works well for Output device.
So is there any difference in setting/getting the volume of input channels?
I am pasting the downloadable link to sample.
http://www.4shared.com/file/169494513/f53ed27/VolumeManagerTest.html
Thanks in advance.
Regards
Mustafa
Tags: MacOSX, CoreAudio, Objective C.

That works but the the game will not be in full screen, it will have an empty strip at the bottom.
I actually found out what's the problem. I traced the stageWidth and stageHeight during resizing event. I found out that when it first resized, the stage width and height were the size with the notification bar. So when I pass the stage into startling, myStarling = new Starling(Game,stage), the stage is in the wrong size. For some reason, I can only get the correct stage width and height after the third resizing event.
So now I need to restart Starling everytime a resizing event happened. It gives me the right result but I am not sure it is a good idea to do that.
And thanks a lot for your time kglad~I really appriciate your help.

Problem with Creative Audio Control Panel

) Heya, I just bought a SB X-Fi Xtreme Audio and I've encountered a problem with Creative Audio Control Panel. My OS is Win7 x64; I have installed the newest drivers for SB. The problem is that I can't set my setup for headphones. I mean I can do that and it's working untill I turn off the PC or restart the system. After that it always sets for 2/2. Speakers. Any ideas how to make this thing to remember my settings the way I want it's Thanks!

- The problem seems to be fixed Here's the solution for my card: <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493" title="Linkification: http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493"]http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493[/url]

Audigy 2 ZS Platinum - Front panel issues

Hello there,
I originally had the Creative Audigy 2 ZS Platinum and all was fine. It all worked and the world was happy. I then (won't go into details) managed to damage the card and whilst I still got sound, the front panel and the joystick port would not work. As it was only the card that was broken, I purchased a new Audigy 2 ZS card assuming I would be able to just stick the front panel connector back on and all would be hunky-dory.
As you probably guessed, I am here, so all is not well. Whilst the game port now works, the front panel still does not respond to anything and I am at a loss. Is there some kind of jumper I need to switch or something? What have I done wrong.
All input is more that welcome, thanks...

i am having front panel issues. i think the damage to the card is a potential problem, but i don't think it's the cause for the panel not working. i think something is just seriously wrong with creative hardware. i really don't think pre-sales testing was performed extensi'vely enough. i have had more problems with my audigy 2 platinum in the 2.5 yrs i've had it than a new born baby. to make a long story short, i did a complete upgrade of my system, the only thing i kept was my case and audigy 2 and front dri've bay. i did nothing different than i had before, re-installed windows and everything. everything EXCEPT the front dri've bay works. i do get the red light from the optical out though, so there is power. i don't know what's wrong with this thing. all i can say is: creative you need to get your s**t together, you have as many issues with your sound blaster cards as microsoft has with windows. tech support: you need to do something for once and answer posts that people ask. i posted my question about this problem 7 months ago when it happened, guess how many repsonses i have. ZERO, NONE, NADA, NOT ONE RESPONSE. i don't blame forum users, not everyone knows, i blame tech support b/c you don't respond. i have no clue why, but do something, please.

Audigy 2 Platinum Front Panel

I just built a new custom machine and I want to use my audigy 2 plantium. My new case is black and the front panel is white. Can I just purchase a new front panel that is black? Or can I just change the white face plate? It looks like the white face plate just clips on. There is nothing wrong with the device other than its an eye sore. I looked on creative's website and could not find anything about replacement panels. I really do not want to buy a new X-Fi Platinum and spend $99 bucks on a backup computer, as I already have a X-Fi in my main system.
Thanks for the help.

Actually I'm having the same problem too here.
Did all the troubleshooting I could the only thing left is to test the AD_EXT cable.
Anyone able to give some advise on this?

Audigy 2 Platinum Front Panel Connecti

I recently began recording my band in our home studio. My mixing board is a Midas Venice 240 which has two balanced XLR outputs from the master bus. I am wondering what method I may use to connect this output to the /4" stereo input on the front panel of the Audigy 2 Platinum. If I just purchase a Y-adapter to combine the two channels into one XLR and then convert it to /4" TRS jack will both channels be preserved? Are there any sound quality issues that arise from this method of connection? I was hoping to get answers to these questions before wasting money buying unnecessary adapters.
Thanks

The BEST way to do this is to go to radio shack and buy two (yes 2) of their?XLR to /4" Impedence Matching Transformers, AND?one (yes )?dual /4" female TS (tip-sleeve) to single /4" male TRS (tip-ring-sleeve) "Y" cable. Unless your mixer also has /4" main outs as well as the XLR... then you can just use the Y cable and skip the transformers. Or you can use a /8" Y cable with the transformers (and stereo /4 to stereo /8 adapter) and go into the card's line in jack on the actual card. Which is how I did it for a year or more untill i got a firewire recording interface (and it worked darn good too with my Soundcraft mixer and some good microphones). Either way,?you need the transformers for optimal results. The reason is the mixer's output impedence and level doesnt match that of the soundcard's input... mixer will likely overdri've the card, or the signal will sound weak or noisy.. The transformers?are cheap and are darn handy for loads of recording functions, and will provide the Audigy with exactly the type of signal it needs, properly transformed from the mixer. If you do this, you can record ALL of the mixer channels IN STEREO with all the panning, effects, and levels preserved. If you have multitracking software like Cubase or similar, you can even record an individual instrument (or even 2 at once, one panned left, one right... each assigned its own track in your software), come back on a new track (or pair of tracks), and record a different instrumet (or 2) and build a multitrack recording one performance at a time. PS:? you CANNOT just hardwire the mixer outputs and combine them into a single channel. A mixer is needed to properly combine?signals. Don't do it
!!! Have fun... and rock on.PSS:? make sure your overall cable is as short as possible. If you must run it for more than 6 feet then run it in XLR mode and convert it very close to the computer. The non XLR section of cable is an antenna for noise. The XLR section will be shielded against noise. Also, the transformers are kinda heavy so do not plug them into somthing and allow them to hang in the plug becasue the hanging weight will ruin your jack. Its best to run cables to the transformers, allowing them to lay on the floor... in a safe place where they wont get stomped on.
Message Edited by ElectricUrinal on -28-200708:0 AM

Audigy 2 Platinum Front Panel Probl

Hello everyone. Thank you in advance for any help.
My problem is two-fold, let me begin with the first issues.
Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

Hello everyone. Thank you in advance for any help.
My problem is two-fold, let me begin with the first issues.
Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

Audigy 2 platinum front panel h

Hi
I have got a problem with my audigy 2 platinum. I want to be able to plug in a guitar or other audio devices for that matter into the front bay. However i go into surround mixer to enable the device but can't find line in 2 or aux 2 listed anywhere. So no sound is heard. I have confirmed there is power to the front hub by checking the optical connection and confirming there is a red light. How can i get the inputs to work?. How do i enable them?.
Any advice would be much appreciated.
Many Thanks
Chris

Hi
I have got a problem with my audigy 2 platinum. I want to be able to plug in a guitar or other audio devices for that matter into the front bay. However i go into surround mixer to enable the device but can't find line in 2 or aux 2 listed anywhere. So no sound is heard. I have confirmed there is power to the front hub by checking the optical connection and confirming there is a red light. How can i get the inputs to work?. How do i enable them?.
Any advice would be much appreciated.
Many Thanks
Chris

Problem with XFI platinum fatal1ty sound from panel but not from c

Hi
I just got an XFI platinum fatalty card with front panel, I have only been able to get sound out of the ports on the acctuall card for about 3 minutes then it screetched and went off. Since then the most I can get is an EXTREEMLY quiet (I need to turn up my speakers and the card volume to full) and distorted sound from my center and rear left speaker (5. set). However the wierd thing is when I plug in the headphones into the front panel it works perfectly, the thing is if i switch it back to speakers i have to restert before the headphones will work again.
I have tried to update the drivers but there are no newer ones, I figure I have it seated correctly or I would have no sound from the panel, I just dont know what to do.
its plugged into a Asus Crosshair nForce 590 SLI AM2 Motherboard, I have tried it in 2 different PCI slots and nothing changes, I'm running XP.
Help please, it would be much appreciated, I went through hell to get this card deli'vered and not its not working properly!!!
Any ideas?Message Edited by C4TS on -09-20072:42 AM

Is there anybody with any idea what the problem might be?

Audigy SB 2 ZS Platinum Front Panel not working-HELP

Hey everybody. I'm new to this forum, but not to computers. I built my computer about 4-5 months ago, and here are my specs:
Ultra MS Blue Dragon
ASUS P5GD
Intel P4 Processor 3.0GHz
GB GeIL RAM
6600 GT 28MB Video Card
Samsung 20GB SATA HDD
Lite-On and NEC DVD Dri'ves
Ultra X-Connect 500 W PSU
Creative SB Audigy 2ZS Platinum
I got the 2ZS platinum from a friend, but I already had a regular 2ZS. I plugged in his front panel to my old 2ZS. The front panel did not work. I then got his 2ZS, just the sound card, and plugged in the front panel. It still did not work. I installed all the software and drivers, and nothing. My sound card works fine, it is just the front panel that doesnt work. Does anyone have any ideas?
Thanks a ton,
Derek
P.S. The AD_EXT Cable fell apart a couple of times, but we put it back together. Could that be a problem? If so, where can I get a new AD_EXT Cable?

ttt

Soundblaster audigy platinum jack panel compatibility with audigy 2 or audigy 2

Can I use a Soundblaster audigy platinum dri've (the front case jack panel) with an audigy 2 or audigy 2 zs sound card? Is it compatible? This is so I don't have to by a platinum version of the audigy 2 or audigy 2zs and spend the money on another dri've panel just to upgrade the sound card.

As both the Audigy and Audigy 2 lines report they are compatible with WinXP, is there any reason I wouldn't be able to use my Audigy Platinum system I bought in 200 with a suped up new Dell Dimention desktop system I just bought? I guess the question behind the question is, what's the difference between the Audigy and Audigy 2 besides just the parts not being compatible with each other and the true bit thing fixed? Thanks!
Message Edited by sseres on <SPAN class=date_text>03-26-2005 <SPAN class=time_text>03:5 PM
Message Edited by sseres on 03-28-2005 07:06 AM

P35 Platinum front panel audio with Antec P180 case?

God I have a headache after reading all those "front panel audio" threads. Why can't mb's all use the same freaking pinouts!!!!
The case doesn't have a HD front panel.
MB pinouts are:
1. Mic_L (MIC Left Channel)
2. GND
3. MIC_R (MIC Right Channel)
4. PRESENCE#
5. LINEout_R (analog port right channel)
6. MIC_JD (MIC jack detect)
7. Front_JD
8. NC (empty)
9. LINEout_L (analog port left channel)
10. LINEout_JD
Case Front Panel connector is a preconfigured block with pigtails hanging off in case it doesn't match up.
1. MIC Signal
2. MIC Power (MIC BIAS)
3. Ground
4. FPOUT-R (front right)
5. FPOUT-L (front left)
6. RET-R (rear right)
7. RET-R (rear left)
glaring differences are the ground and the MIC connectors.
How do I connect these? I don't want to fry anything.
Thanks.

They do have the same pinouts. There are two standards is the reason for two different pinouts. It's just that your MB is Intel HD and your case is AC-97.
For Intel® High Definition Front Panel Audio
Pin Signal Name Description
1 PORT 1L Analog Port 1 - left channel (Microphone)
2 GND Ground
3 PORT 1R Analog Port 1 - right channel (Microphone)
4 PRESENCE# Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected
5 PORT 2R Analog Port 2 - right channel (Headphone)
6 SENSE1_RETURN Jack detection return for front panel (JACK1)
7 SENSE_SEND Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network
8 KEY Connector key
9 PORT 2L Analog Port 2 - left channel (Headphone)
10 SENSE2_RETURN Jack detection return for front panel (JACK2)
For AC-97 Front Panel Audio
Pin Signal Name Description
1 MIC Front panel microphone input signal (biased when supporting stereo microphone)
2 AUD_GND Ground used by analog
3 MIC_BIAS Microphone power / additional MIC input for stereo microphone support
4 AUD_GND Ground used by analog audio circuits
5 FP_OUT_R Right channel audio signal to front panel (headphone drive capable)
6 FP_RETURN_R Right channel audio signal return from front panel (when headphones unplugged)
7 AUD_5V Filtered +5 V used by analog audio circuits
8 KEY No pin
9 FP_OUT_L Left channel audio signal to front panel (headphone drive capable)
10 FP_RETURN_L Left channel audio signal return from front panel (when headphones unplugged)

Audigy 2 ZS Platinum front panel under VISTA

I've got the card and front panel installed and apparently working, except one issue. I'm trying to pipe in sound from a stereo receiver to the front panel auxiliary 2 inputs, so I can listen to a sporting event(broad cast on AM) over my pc and record it. When I turn on the receiver and hook it up, I hear nothing. When I start the recording software and record, it records from the auxiliary 2 perfectly and I can hear the broadcast fine on playback. So, the question is, why can't I hear it li've over my speakers?!?! Extroadinarily frustrating! VISTA has no volume control display(that I could find) like XP did where I could check the auxiliary 2 levels, etc.
Again, I'm running VISTA Ultimate 64 bit and have the most current Creative sound drivers installed and all other sounds from within programs seem to be working 00%.
Thanks for any help!

Nothing huh? Nobody has any idea about this or knows of another thread where this question was answered?
Thanks in advance if you can help out!

Problem with Audigy 2 Platinum Front Panel Input

Similar Messages

Maybe you are looking for