Problem with Audigy self extracting file for Vi

I have downloaded the latest Vista driver for the Audigy 2, which is a self
extracting file. When I run it, I always get the same error message:
file error[@s]crc,0xc50a2d5:0x0d8c70c
and then the process aborts. When I download and run the file on my XP
machine, it runs just fine and brings up the installation program. Any ideas
on how I can get this thing to run under Vista. I went this route because I
was never able to get the onboard Realtek '97 audio to work. Under that
scenario, Control panel says the device is working properly and there are no
conflicts, but the speaker icon in the system tray has a red x over it, and I
get no sound. I would gladly accept a solution to either problem so I can get
the audio working.
Chuck

Ok, I've edited the VI you posted to reproduce my error (this time with 8.0). 
I added a "master stop" and "start log" button.  To demonstrate my problem:
1.  Run the VI
2.  Click "START LOGGING" - c:\test.txt is created
3.  Click "STOP" - c:\test.txt is closed
4.  Delete the file c:\test.txt with Windows shell or explorer
5.  Click "START LGGING" - a new c:\test.txt file should be created but instead an error is raised in the Write LabVIEW Measurement File function.
Any ideas?
Thanks,
Dave
Attachments:
Write LV Meas File 2.vi ‏96 KB

Similar Messages

  • Problems with audio in quicktime file for dvd authoring

    i have converted sequence into quicktime file for burning into dvd. i have am experiencing some problems with voice over which disappers and comes back later in the quicktime file when i play it. this quicktime file is made as self contained movie. I have traced this back to the original sequence in the timeline to a white line or series of line in at the top of the time line. one is for video and the other is for audio. when the first line appears the voice over gets interrupted and audio stops in the quicktime file but its ok in the timeline. when the white line shows again the voice over can be heard again in the quicktime file and audio stops again at the start of another white line. there is no loss of audio in the sequence in the timeline. so please can someone help me understand what the problem is.

    thanks tom. i am refering to render bar in the timeline, upper for video and lower for audio. May be i shoud describe them as white line gaps between dark grey or steel grey bar color.
    what do you mean by down mixing? please advise

  • Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

    Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
    1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
    2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
    Appreciate for any help rendered.

    Mikko777 wrote:So what is the best?
    I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
    What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
    Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
    Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
    Mikko777 wrote:PS:You produce a lot of text and welcome smile
    Yeah. Wonder why I'm still employed? So do I ...

  • Trying to install snow leopard on my Macbook Pro.  After already having problems with Grey screen, blinking file with a question mark, etc.  Computer now says that one of the hard drives is failing.The "hitachi" drive says it's failing in disc utility.

    o.k.  So, I've been tinkering with several "self help" fixes for several days now with no positive results.  I'll explain my initial problems and then end with my most current situation.  In hopes that someone out there will have a good suggestion or possibly remedy for the issues i'm facing
    First, my problem started after my wife played a game on my macbook pro and the computer froze.  She went into a panic and decided to shut down via power button.  When computer restarted she got the blinking file/grey screen and that problem continued for a couple of days before I began using steps from various support topics from apple concerning the grey screen/blinking file folder.
    Ultimately, yesterday I decided to erase my Macintosh HD file as one tip suggested.  Following the brief online and on screen (via the process) tips that were there.  Once that was completed I attempted to reinstall snow leopard (my most current version on hand) into the pc. 
    At first, I thought this would work.  It looked promising.  But, after several hours the installation screen returned with failure.  I attempted to repeat.  And, even repair drives during this try and re-try process.
    Now, today, one of the drives..  "hitachi..." states that it's failing and is in red letters with no ability to repair via the disc utility screen.  The Macintosh HD drive shows that it's o.k. But, this drive is listed under the HItachi drive so I think that's where a problem might lay.
    So, I guess my question really revolves around.. What if anything can I do to get the hitachi drive back up?  (short of taking it to a repair facility and replacing.) 
    And, how on earth can i get my OSX back up to I have a laptop again. 
    Operating on a macbook pro here.  It's my lifeline.  Otherwise, I am using a Windows desktop that i'm not that fond of.  lol
    I'm trying to bring this 2006 laptop back to life.  Trying to avoid a rather expensive repair or the purchase of a new laptop.  Also expensive...
    Any help would be appreciated.

    Well, running on a 2006 model.  I did not have a startup disc.  Initially, it booted up on original software in 2006.  Since then, I've upgraded to 10.6 via a box set.  And, since then I think I popped it up to lion. 
    All I have on a disc is snow leopard.  And, I can't get farther than the setup screen due to hard drive.  I'm taking to a apple authorized repair store right now.  We'll see what they tell me .  I'm just going to weigh the cost of repair vs. buying new.
    Another bad, stupid thing is I had no means of backing up my stuff.  So, I might have lost things like music, vids, etc.  we'll see if they can recover.  If the cost is too much for repair I might just forget it and start over with a new system.  Just not sure at this point.

  • Problem with Preview and PSD files - random gray square

    Hi guys, hope you can help...
    I've got a problem with Preview and PSD files.
    If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
    If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
    I've tried the same psd on my older iMac with leopard...and got no problem at all.
    I suspect it got something to do with my Ati...
    (this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
    Thanks for your help.
    DAve.

    maybe I'm onto something...
    I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
    It seems like the i7 is much faster than the Ati....
    Any more realistic ideas?

  • I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

    I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

    Hi Arika,
    The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
    All these drivers are available for downloading on ni.com. To get the drivers, go to ht
    tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
    I hope this information helps.
    Best Regards,
    Wilbur Shen
    National Instruments

  • Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

    Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • Problem with Append mode in File Receiver

    Hello,
    I am facing some problem with Append Mode in File Receiver.
    In channel config, i have given :
    Construction Mode : Append
    File Type : Text
    Message Protocol : File Content Conversion
    The size of the file which i am trying to send is about 9.5MB.
    I got this error,
    "Recovering from loss of connection to database; message
    loaded into queue by recover job: System Job (Failover Recovery)".
    So, it would seem that there was a loss of connnection to the database    
    while the file was being written.
    Note -  XI successfully recovered from the connection loss and   
    successfully wrote the file, however since the communication channel  
    was set to append, it appended to the partial file that was written   
    before the database connection loss. This is not correct. The file    
    should have been overwritten after the recovery even though the communication
    channel was configured to append.                                     
    Can anyone help me on this regard.
    Thanks,
    Soorya.

    Hi Venkat,
    I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
    Memory Requirements are must 4 processing huge files:
    Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
    A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
    o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
    o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
    o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
    o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
    To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
    Plz do refer the following links:
    U may plan the availability of ur communication channel using "Planning Availability Times" feature
    http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
    /people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
    hi check the below links for reference
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
    Regards,
    Vinod.

  • Problem with RTPExport output video files

    Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

    Trubka wrote:
    When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
    How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
    Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
    That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
    If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

  • Having problems with my Microsoft Word 2011 for macbook

    Hello,
    Every time I open up the Microsoft work 2011 on my macbook this error message keeps showing up. 
    "The Open XML file Normal.dotm cannot be opened because there are problems with the contents of file name might contain invalid characters (for example, \ /)."
    And then right below it, it says: Details: No error detail available
    So now my questions is why is it doing that? And can you please help me and tell me step by step on what I need to do.
    Also is their a refresh button for Microsoft Word for a macbook?

    You would be better served if you asked questions about Word for the Mac on a different forum:
    http://answers.microsoft.com/en-us/mac/forum/macword
    This forum is for PC based IT users and not too many PC users are familiar with the Mac. I happen to be one that is however.
    George Summers has already suggested renaming your Normal template, but first I think you should remove any prior version of Office for the Mac (if there is one) that is on this machine. There are ways to have multiple versions of Office on the same machine,
    but if you don't really need the prior version you should remove it.
    Create a new user id on the machine and open Word from it. Hopefully you don't get the same error message. Then go to Word > Help and run the Check for Updates function until it tells you that your software is fully updated. Finish up by running the Disk
    Utility app located in Applications/Utilities and Repair Permissions on your Primary Drive, which is usually Macintosh HD. Then restart your system.
    Login under your user id and before starting anything use Finder>Go>Go to folder... and paste this string into the text box.
    ~/Library/Application Support/Microsoft/Office/User Templates and in there should be the Normal.dotm template. If it is not there look for it as George as pointed out from Word>Preferences>File Locations and remove it. It should be in
    the User Templates folder and if it is in a different location this can be causing the problem, which can be fixed but for now, your objective should be to get Word running as Microsoft had expected to run.
    When you are done with this, post your update on the Answers forum that I shared with you and mark this thread as closed.
    Kind Regards, Rich ... http://greatcirclelearning.com

  • Problems with mp4 (h.264) files, colour desaturated.

    Hey guys. I've been having problems with mp4 h.264 files (not quicktime h.264). When playback on windows media player and windows classic media player it looks terrible. the saturation are weird (espesially on colours like yellow and red) and there seems to be this weird blur on the image. For so long I thought there was problem with the export from Premiere Pro, today however when playback on Quicktime player or VLC player it matches the orginal. I exported the file through premiere pro. I don't know what the problem is, maybe it's just the playback on windows media player and window classic media player.
    Playback on quicktime
    Playback on media player
    Can someone tell me what's going on?

    When playback on windows media player and windows classic media player it looks terrible. the saturation are weird (espesially on colours like yellow and red) and there seems to be this weird blur on the image... when playback on Quicktime player or VLC player it matches the orginal...
    On the contrary, with more than high probability playback in QuirkTime shows you wrong colours because of its crooked colour management.
    How do you judge on colour matching between your source file and what you see in media players?
    What is your spec and GPU in particular? Do you use any sort of colour management in its settings?

  • HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

    Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

    Download and install the free VLC for Mac - that should work:
    http://www.videolan.org/vlc/download-macosx.html

  • I've switched from Google to Firefox because I was so tired of Google crashed all the time. Now I have the same problem with Firefox, Bank id, file down

    Hej!
    I've switched from Google to Firefox because I was so tired of Google crashed all the time. Now I have the same problem with Firefox, Bank id, file downloading, accessing Web pages, none of it works. What is the error?
    Ronnie.

    When Firefox crashes, it usually records information about what was happening at that moment and displays the Mozilla Crash Reporter. Are you seeing that, or is Firefox just freezing and you're killing it?
    Assuming you have crashes, you can submit that data to Mozilla and share it with forum volunteers to see whether it points to the solution. Please check the support article "[[Firefox Crashes]]" (especially the last section) for steps to get those crash report IDs, and then post some of the recent ones here.
    If that's not possible, have you tried Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

  • I had problem with my apps,they open for a while and closes with in seconds i cant acess them

    i had problem with my apps,they open for a while and closes with in seconds i cant acess them and i had this with all apss,expect apple apps

    Do you have a lot of apps? Did you use a lot of apps recently? If so, many of them may still be resident in memory even if you aren't currently using them. Double-tap the home key and you should see the app tray with a list of most recently used programs. Press and hold the icons in the tray and remove the ones you don't use often to remove them from memory. Powering off and then back on might also help.
    My wife's iPod does that sometimes, and it's usually because we run out of memory due to apps remaining in memory even when not used. The suggestion above is how we normally fix the problems.

Maybe you are looking for