Problem with audio and vga adapter in presentations

this is an odd problem. I potted a presentation that contained a qt movie. The video plays with sound just fine via the vga adapter until you plug in an external speaker system or earphone. the sound stops.
if you play a video outside keynote or play the video with out the video vga adapter or just unplug from the audio jack it works fine. am I missing something or is this a bug. For the life of me I can not figure out what the VGA in keynote has to do with audio.
John

Dr. John, this might be a little simple of an answer, but is the video jack pushed all the way in?
I had the same issue with my ipad playing a movie over a sound system and projecting it also, and discovered that the Apple issue iPad cover comes very close to interfering with the audio output jack, and that my plug into that jack wasn't all of the way in.
After that it's worked fine.

Similar Messages

  • Upgraded to mac os x maverick 10.9.1. Any suggestions on how to fix problems with audio and video bugs?

    Having problems with video and audio delays for mac ox x maverick 10.9. Are there any ways to fix this?

    I also noticed that if I wiggle my mouse around while I watch video streams the video&audio is significantly smoothier.

  • I bought a new MBA and are having problems with HDMI and VGA port

    Hi,
    I just bought a new mac book air, and at the apple stre they recommended me a mosh mini to vga cabel. I need to use my computer for projector either hdmi or regular vga adapte. The new mba only has thunderbolt, usb, memory/card slot, microphone and headphone ports.
    Does anyboody has and idea how i will  or how do i connect the hdmi or vga adapaters to the computer. I have been searching on the cables the apple store has available but the end that goes into the computer is not compatible with the ones I mentioned above.
    Please any help would be of great help, because I dont know what to do. I think this is a problem with the new MBA.
    thank you,

    Thank you doubr.  So what I need is to buy the thunderbolt cable  and the minidisplayport to vga adapter or the griifin mini display port to hdmi tht toothpickproductions recommends, is that correct?
    The one I have is a mini dvi to vga adapter and the end that goes into the computer is the same one that the minisdisplayport to vga adapter or the griffin one have, and is too big to go into the new mba. I dont know if I am confusing you more with what I am saying.
    check the link below and you will see the ports the mba has
    http://www.apple.com/macbookair/specs.html
      if you see the ports that mba has, the two minidosplayport that are recommending do not fit..  
    So, do you know that if I buy the thunderboldt cable will either of the two minidisplay ports fit or I  need to buy another adapter for the minidisplay ports??
    thank you because I am kind of confused, I did not have this problem with the macbookpro I had before...

  • Satellite Pro C650D - Problems with audio and game controllers

    Hi,
    I have recently had problems with my microphone and speakers/headphones as well as game controllers.
    The microphone sometimes stops working when on Skype for example, but most of the time works fine again when I restart the pc.
    The speakers are sometimes still working when I plug in headphones.
    Some of the sounds are still coming through the speakers where as some coming through the headphones.
    I have a usb game controller which also did not work any more properly.
    If I assign the buttons in the program they do not work in the game.
    All these device are in the device manager in one group which makes me think that it is some kind of dodgy annoying update that messes around with them.
    Does any body have similar problems or know what to do best?
    Cheers
    Laurin

    Hi
    Can you please post some details about the notebook model and the system you are using?
    Regarding the sound/mic issue:
    >The microphone sometimes stops working when on Skype for example, but most of the time works fine again when I restart the pc.
    Are you talking about internal or external mic? Does this happen only using Skype?
    In your case I would test the mic using different applications to ensure that this is not a Skype related issue.
    >The speakers are sometimes still working when I plug in headphones.
    I recommend checking this thread:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65295
    The user has had an similar issue but this was related to settings in Realtek HD Audio Manger.
    Her wrote:
    +In the top right corner, there's a little yellow folder called "Connector Settings" in my version.+
    +There, I could finally reactivate the setting "Enable pop-up dialog, when device is plugged in".+
    +So now when I plug in an external speaker or headphones, it pops up and I select the option "headphone" (instead of "line-in"), and then the sound comes out only through the headphones/ext.speaker.+
    Regarding the game controller:
    >I have a usb game controller which also did not work any more properly.
    >If I assign the buttons in the program they do not work in the game.
    I dont think its notebook problem in my opinion you should ensure that the controller is compatible with games you are playing and would also recommend checking some info providing by manufacturer of the game controller.

  • [SOLVED] Problem with Audio and Samba

    Hi, this is my first post. I think I should put here.
    I have a hard drive connected via network, and accessed the protocol with samba (smb). Mapping shared everything perfectly even see pictures without problems, but when it comes to playing music all players remain "flipped" do nothing, or give an error, but does not sound.
    On another computer with Ubuntu works without problem.
    I used VLC and Rytmmbox with the same results.
    Sorry for my English, I'm Spanish
    EDIT:  I tried with totem and if it works.
    Last edited by karendon (2013-03-01 17:57:42)

    No ideas

  • Having problems with audio and video when exporting to quicktime

    I've exported a couple of keynote presentations to Quicktime and uploaded to youtube with no problems. I've now added a motion background in my intro, which looks great in keynote, but, it would appear that it causes problems. The mov file does play the animation, but, not as it was recorded, the audio then becomes out of sync and the advance on slides is all over the place with some not appearing. Is this a common problem? I am exporting at best quality and 1280 x 720, leaving all other settings as preset. I suspect that if I drop the background altogether it will work, but, it looks so great in keynote that'd be a shame. Any tips?

    I'm confused with the aspect ratio when I crop them i know I have to lock the aspect but should I keep it on Original? Also i'm wondering when it comes to export them what size should I be placing if I want to print all sizes.
    The crop aspect lock only comes into play while you are actively resizing the crop boundary. LR always works in a freehand manner, except that if the ratio is locked, adjusting the crop frame is allowed to alter its size and location and angle - but not its shape. If the ratio is not locked, you will be changing the crop shape freely if/when you drag the corner or edge handles around. The rest of the time, the lock makes no difference; and it is just as possible BTW to lock a random freehand aspect ratio, as it is to lock one of the standard preset ones.
    If you are uploading an exported copy for printing, you could simply upload a JPG made at the original resolution (as cropped for composition and angle) - that is, unchecking the whole resizing section of the Export dialog - and give the printer instructions as to how large the various prints are to be. Or I suppose, you could resize to the largest of the sizes that you require, but you will then need to negotiate a pixels-per-inch "resolution" setting that will be appropriate - since, when resizing to a page size, this figure governs the pixel content of the file produced.
    I would suggest that in the case of an export without resizing, where a generous quantity of pixels are included for the sorts of page sizes mentioned, you will likely not see any discernible printed benefit from setting the highest JPG quality setting for your export, but will be fine with around quality 6 to 8 - which brings the file sizes down significantly. Most often, printing services will presume that you have selected sRGB colourspace for your export, unless something different has been pre-agreed.

  • Severe problem with installing and starting Audio-DVD Pla

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

    Hi,
    after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
    Any ideas?
    Best regards and thank in advance,
    PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

  • Problems With Syncing and Audio Play with Itunes

    I've been having a problem with Itunes and my iPhone for the past few days. First of all, iTunes will not play any songs. When I press the play button, the speaker changes to the play picture, and the song loads at the top, but the timer stays stuck on zero. Also, when I attempt to sync my iPhone it will not add new songs downloaded onto my phone. I have updated and re-installed iTunes and it has not helped. Also, tonight I even updated my phone settings (which I interestingly enough was able to do despite the fact that I cant get a song to transfer to my iPhone, yet somehow the new program settings were able to make the jump.)
    I am using Windows Vista at the moment. Does anyone have any idea as to what could be going on? Any help would be greatly appreciated.

    Hi,
    Have you tried backing up you iPhone and copying over everything to iTunes etc.Apps,Videos...Then Restoring to factory setting?
    If that doesn't work try Manually Managing you Music and Videos.

  • [Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

    Ok,let's go...
    I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

    thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've  tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1.  i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection.  i have 2 screenshots to show you:
    this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
    the other one is from everest corporate edition:
    both drivers marked with purple colour!
    i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
    i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
    thank you very much and i'll stay alert of your suggestions. by

  • Problem with Audio on HP Envy 6-1130sw (C6F62EA)

    Hello everyone.
    I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
    Thanks. 

    Hi piotrek1130sw,
    From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
    Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
    Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
    If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
    If neither driver works I will gladly follow up and provide any assistance I can.
    Please let me know the outcome.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Problem with Speaker and Headset in Windows Vista

    Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
    Regards,Edwin

    When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
    http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

  • Problem with Preview and PSD files - random gray square

    Hi guys, hope you can help...
    I've got a problem with Preview and PSD files.
    If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
    If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
    I've tried the same psd on my older iMac with leopard...and got no problem at all.
    I suspect it got something to do with my Ati...
    (this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
    Thanks for your help.
    DAve.

    maybe I'm onto something...
    I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
    It seems like the i7 is much faster than the Ati....
    Any more realistic ideas?

  • Problem with vista and 5.1

    problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
    In my new pc.
    i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
    when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
    why is that?
    i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
    do i miss something?
    is the test worg and with another test i can get all spedajer to work or the driver is not good?
    thanks for all you help
    last update...
    i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
    but in movie mode i get only 2 front speaker.
    i use the digital out from the sound blaster.
    Message Edited by raflevi on 05-4-2009 02:38 [email protected]

    My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
    ***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
    . Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
    2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
    3. In the Audio Console, select the Encoder tab and enable DLL encoding.
    Note:
    When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
    To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
    raflevi wrote:
    when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
    thanks again for all your help.
    i wanted to use the 5. function mostly for games
    Yes... also please see the link in my previous post.
    Hope this answers your questions.

  • How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

    How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

    Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
    (119682)

  • Potential Problems with Airplay and Mountain Lion

    Hey Everyone,
    I recently purchased an Apple TV, and I tried to use Airplay with our Macbook Pros. Airplay would work with all of the iOS Devices, but when it came to using with the MBP, it would either show a black screen, or a frozen image of my screen. I called AppleCare, and the rep told me it was a problem with the AppleTV, so I returned it and bought a new one, and it did the same thing. I found out that the problem was occuring because of the type of router I was using. I have a dualband router, and I set everything on one band of the router. I decided to try to place the laptops on a different band, and that's all it took. My airplay now works flawlessly.
    So, if you're having a problem with airplay, and you have a dualband router, try placing your computer & iOS devices on the opposite band, and it should work perfectly.
    Hope this helps.
    - Kaytie Walters

    The VPN log looks like:
    1      13:34:36.904  09/11/12  Sev=Warning/3
    CM/0xA3100027
    Adapter address 10.211.55.6 has changed or not detected.  Current address(es): 10.98.70.169.
    2      13:34:52.044  09/11/12  Sev=Warning/2
    CVPND/0xA340000E
    Failed to get adapter index.
    3      13:35:07.044  09/11/12  Sev=Warning/2
    CVPND/0xA340000E
    Failed to get adapter index.
    4      13:35:07.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
    5      13:35:08.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
    6      13:35:09.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
    7      13:35:10.123  09/11/12  Sev=Warning/2
    CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
    8      13:35:11.861  09/11/12  Sev=Warning/2
    IKE/0xA3000067
    Received an IPC message during invalid state (IKE_MAIN:512)
    9      13:35:12.407  09/11/12  Sev=Warning/2
    IKE/0xA3000067
    Received an IPC message during invalid state (IKE_MAIN:512)

Maybe you are looking for