Problem with audio capture device

Hi!
I can stream video perfectly but as soon as i enable Audio i get problem. I see my every audio inputs and the name of my sound card. But still it refuse to work. Sometimes it complains about audio format also. But ive choosen Mp3, Stereo, 44100 and 128 kbps. Standard format .............
Any solutions for this ? Im using Creative X-Fi Elite Pro on Windows 7.

I'm having a very similar issue with Blackmagic SDI4K card. The SDI4K works well with Blackmagic Media Browser software - it captures SDI signal just fine. But FMLE doesn't properly recognise the card, generates all sorts of error messages whenever a setting is changed, and ultimately crashes before completing change of settings. Any ideas?

Similar Messages

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Problem with Video capture Device

i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,

The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc.

Problem with video capture device, with a virtual camera

I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
"Error connecting input preview RGB filter."
"Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
"Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
"Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
However, it is good to use AMCap,
what's the problem with FMLE.
Looking forward to your replies. Thx!

Did you ever figure out the problem/solution?
I am experiencing the same thing with my virtual camera filter when connecting to FME?
Shawn

Problem with audio capturing

hi all!
i just bought a Phonic Digitrack to connect my audio devices with my macbook 13" - url: http://www.phonic.com/en/digitrack.html
it officially is compatible with mac os x and capturing from it using quicktime works.
unfortunately i cannot choose the device from the devices list in flash media live encoder allthough fmle states to support all quicktime compatible devices.
have i done something wrong?
maybe another device will work? eg. elgato video capture: http://www.elgato.com/elgato/na/mainmenu/products/Video-Capture/product1.en.html (which also supports video capture)
can somebody share experience on those two products or give any hint, why fmle won't identify the devices allthough quicktime does?
thanks in advance!
matthias

Are your capture settings right? In the Capture Window, there are tabs off to the upper left of the preview screen. One of them allows you to select if you want to capture only Audio, only Video, or both.
Are both Boxes checked?
~Luke

Extra bytes problem with audio capture,j2me

hi there
I m working on a J2ME application that captures live audio through microphone into a bytearrayoutputstream .
i have supplied the capture time,sampling rate, bits per sample, no of channels info to the program.
but when i check out the size of the byte array , i see that its greater than what it should be !!!
if the size had been lesser than expected, i could guess that sum bytes are getting lost , but what attributes to the larger size.
and everytime i run the program i c that the size is larger than expected though the number by which it exceeds is different everytime.
can ne one help??

Hi,
Thank you very much for your help. I changed the code as you suggested. It minimizes the gap, but there is still part of missing voices.
When you tried it, did you get really perfect (no gap) recording, as if it was recorded to one single stream?
below is my recording code:
for(int i=0;i<types.length;i++) {
rc.setRecordStream(baos);
rc.startRecord();
Thread.sleep(2000);
rc.stopRecord();
rc.commit();
init.append("baos size after rec:" + baos[i].size()+"\n");
}//end of for
p.stop();
p.close();
and here is the code for playing back the voice:
for(int i=0;i<3;i++) {
bais[i] = new ByteArrayInputStream(baos.toByteArray());
try {
p = Manager.createPlayer(bais[i],types[i]);
p.prefetch();
p.start();
Thread.sleep(p.getDuration());
p.stop();
p.close();
catch(Exception e) {
init.append("exception in playing back voice: "+e.toString()+"\n");
e.printStackTrace();
for playing back, we need to stop and close the player first, then create a new player to play the next input stream, dont we?
Thanks
- alfo

Problem with audio output device not working

Okay about a week ago, i came home from work, booted up my laptop and noticed that the hp quicktouch program failed to start. Then I also noticed a red X over my sound icon on my taskbar. So i thought it might have been an error of some sort and rebooted. When I did that everything came back up find, but when I started playing a game, I noticed the sound went out again... I closed the game and went into the device manager. But as soon as I closed the game out the sound fixed itself... So i started the game back up and about 10 mins in it went out again... So I went back into device manager, scanned for hardware changes and it seems to be working find, so i reinstalled the game thinking that could be the problem.
Well when I rebooted my laptop i got the error again about quicktouch and the red X over my speaker icon. I went back into device manager to find that my sound, game controller device and driver is not even listed...
Ive been looking around for a fix to this problem, but could not find any solution. So today I reinstalled windows again, but no sound, no driver, or anything is showing up. I really dont know what to do to fix this, people say download drivers and ive tried that, nothing is seeming to work.
If anyone knows what I can do to fix this please inform me, the only thing else I can think of is go MAC lol.
Oh btw, im running a HP Pavilion Entertaiment PC (dv9700). It has windows vista 64 bit.
Thanks in advance.

use stystem recovery and lose all files, photos, games and all settings - that the best way ....
use device manager to reinstal sound driver, but try to install diferent versions of it, after update (made by hp update) i had no sound, installing older ver help
sorry for my poor english
Hp Pavilion dv6408nr - Vista
external HDD - ubuntu

Premiere Pro CS3 Capture Problem with Audio

Setup:
Premiere Pro 3.2.0
Video Capture Device: Blackmagic Design Intensity Pro capture card
Audio Capture Device: HT Omega Claro Plus XP
OS: Windows 7 Ultimate 64-Bit
I am able to capture video with Premiere with no issues. However, the audio does not get captured even though it is set to capture both audio and video. I am configured for ASIO capture and playback. Strange thing is that I can load Adobe Soundbooth and it will capture the audio just fine (from the same input stream as I'm trying to do with Premiere). What gives? I'm almost out of options.
From what I can see, when I hit F5 and go into capture mode, Premiere seems to insist that it must capture audio from the blackmagic design audio ports, and even though I have the audio explicitly setup for the Claro in audio hardware, if I go into the capture settings, it still is set on "Blackmagic Capture" as the capture format, and when I go to settings, I can pick the audio channels to capture, however.... I don't want to capture with the blackmagic for audio. The capture format MUST be "Blackmagic Capture" or else I can't capture the video. It still doesn't make sense though, since I have the audio hardware set for input from the claro ASIO. It shouldn't force Blackmagic audio.
Any ideas? Please help

Some additional information:
Sound card is a Claro Plus XT not XP. Used to typing XP heh
Also, the video capture works with the included blackmagic capture software, as well as freeware solutions like VirtualDub and a Japanese freeware program I use. I'm able to capture video and audio without issue on those. Just don't know why Premiere doesn't do it...

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

No audio capture device detected Osprey 240e

I have recently installed Adobe Flash Media Encoder (AFME). I have installed the Osprey 240e video/audio capture card. At first, the Osprey 240e was detected by the AFME. Now AFME is telling me there is no audio device detected. The video part seems to be fine.
I have:
1. Rebooted the computer AFME is installed on
2. Reinstalled AFME
3. Reinstalled the Osprey 240e drivers (reboot computer again).
When I start the AFME program, it still indicates not audio capture device detected. Any ideas on how to resover the issue.

You may need to open a support case with Viewcast. They have always been very responsive when I have had problems/questions.

Media Encoder not finding "audio capture device"

Hi,
Im using Adobe Flash Media Encoder with Dxtory for Twitch streaming, and at first it worked fine. Recorded both my mic and game audio perfectly. Then seemingly suddenly, I fired it up and it wouldn't stream the game audio. It would my Mic, but thats it. I then unplugged the mic and it started saying I had no Audio Capture Device. I checked in Dxtory and its set up the same as it was when it was working. It picks up both the mic and speakers like it should. I have uninstalled this program multiple times, both 3.1 and 3.2 versions, and each time when I re-download it, it loads up the same profile I had before. So when I am uninstalling it, its not uninstalling everything for some reason. Even though the program is no where to be found after its uninstalled. I have downloaded xsplit, and it picks up the game audio and my mic. So its just this program. Anyone have any ideas? I cant seem to find anything online about this issue.
Thanks!

From where? PP sequence? PP bin? PP Source Monitor? Watch folder?

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Problems with audio panning.

Am having problems with audio tracks. For example: when capturing a clip where a person is talking, there would be 2 tracks of audio - one a radio mic (Track 1) and another mic (Tack 2)capturing ambient sound. I often delete the ambient track (Track 2) and am left with the the main audio from a radio mic (Track 1).
The problem is when I open up the main audio track (Track 1) and pan the audio track from -1 to 0 or even to +1! It says it has done it but the sound still comes out of the left speaker.
It is a very recent problem that I wonder may be something to do with preferences or settings.
We have had no problems with the speakers at all.
Thanks very much,
Geoff

You have your audio outputs set to 'dual mono', not 'stereo'.... go to:
Sequence>Settings> 'Audio Outputs' tab > then highlight the 'Stereo' button, then click OK...
problem solved...

How do you select two audio capture devices?

Hi all,
At the moment I'm simply using CaptureDeviceManager.getDeviceList to get a list of all the capture devices on my system. Now when I print this it looks like this...
[DirectSoundCapture : dsound://
LINEAR, 48000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 48000.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 48000.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 48000.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 44100.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 44100.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 44100.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 32000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 32000.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 32000.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 32000.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 22050.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 22050.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 22050.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 22050.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 16000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 16000.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 16000.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 16000.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 11025.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 11025.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 11025.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 11025.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 8000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 8000.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 8000.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 8000.0 Hz, 8-bit, Mono, Unsigned
, JavaSound audio capture : javasound://44100
LINEAR, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 44100.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 22050.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 22050.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 11025.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 11025.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 8000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 8000.0 Hz, 16-bit, Mono, LittleEndian, Signed
Now my system actually has 2 michrophones attatched to it. At the moment I'm using DirectSoundCapture to record audio. My first question is, how do you detect multiple audio capture devices? and then of course, how can you record off of different audio capture devices?
Anything would be helpful, if theres a tutorial somewhere on this which i've missed somehow, please tell me. I'm probably missing something pretty major I figure.

I posted in a different thread that I was using the old javax.sound.sampled library to try to record. However, using this library it was quite simple to get a list of devices which could then be used to make a SourceDataLine that could be used to record. However, I was having trouble actually recording and switched to JMF as it has more features and I thought it would be simpler to use. It probably is but I have been struggling. I can record audio in JMF fine but I cant get a device list as I could with the javax.sound.sampled library.
I'll put the code I was working off in here anyway. It shows what I want to do, I just want to do it in JMF.
Note that this code was written 4 years ago by a Matthias Pfisterer and not by myself.
import javax.sound.sampled.AudioFileFormat;
import javax.sound.sampled.AudioFormat;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.DataLine;
import javax.sound.sampled.Line;
import javax.sound.sampled.LineUnavailableException;
import javax.sound.sampled.Mixer;
import javax.sound.sampled.SourceDataLine;
import javax.sound.sampled.TargetDataLine;
     /** List Mixers.
          Only Mixers that support either TargetDataLines or SourceDataLines
          are listed, depending on the value of bPlayback.
     public static void listMixersAndExit(boolean bPlayback)
          out("Available Mixers:");
          Mixer.Info[]     aInfos = AudioSystem.getMixerInfo();
          for (int i = 0; i < aInfos.length; i++)
               Mixer mixer = AudioSystem.getMixer(aInfos);
               Line.Info lineInfo = new Line.Info(bPlayback ?
                                        SourceDataLine.class :
                                        TargetDataLine.class);
               if (mixer.isLineSupported(lineInfo))
                    out(aInfos[i].getName());
          if (aInfos.length == 0)
               out("[No mixers available]");
          System.exit(0);
Calling this method on my system will print the following.
Available Mixers:
Microsoft Sound Mapper
AK5370
SoundMAX Digital Audio
AK5370 (2)
This looks very different to what I get when I call CaptureDeviceManager.getDeviceList()
How can I achieve the equivilent in JMF?

[SOLVED] Setting default audio capture device

I have a USB webcam with a microphone that is recognized by ALSA after the on-board line-in. This is fine in Skype because I can set the capture device to the USB microphone, but Flash seems to only use the first capture device (listing only "Linux Microphone") recognized by ALSA. Is there any way to set the default (presumably, the first) audio capture device, or get Flash to see my USB microhone?
Last edited by matkam (2010-09-10 22:01:53)

Solved by creating ~/.asoundrc file containing the following:
pcm.usb
type hw
card U0x46d0x81d
pcm.!default
type asym
playback.pcm
type plug
slave.pcm "dmix"
capture.pcm
type plug
slave.pcm "usb"

Problem with audio capture device

Similar Messages

Maybe you are looking for