Problem with audio config.?

I've had this iPod...Video? Is that a 5th-generation? Whatever. Since...July or so last year. Maybe longer.
And suddenly I'm getting this weird "iTunes cannot run because it has detected a problem with your audio configuration."
Checked the audio. Works fine. Tried the "unknown error" FAQ. Still isn't working.
What's up?!
iPod Video 80 GB   Windows XP   ...accidentally got candle wax on it.

Try this -> http://docs.info.apple.com/article.html?artnum=304424

Similar Messages

  • Itunes7 does not let me start up because detected problem with audio config

    hi,
    i have had itunes for a while now but i just upgraded it to version 7. i restarted my computer afterwards but when i tried to start up itunes for the first time it said there was a problem with the audio configuration.
    this is the message,
    itunes cannot run because it has detected a problem with your audio configuration.
    i am using windows xp and would be very grateful for any help, thanks!
    lenovo 3000, N100   Windows XP  

    this is the message,
    itunes cannot run because it has detected a problem with your audio configuration.
    That one is most commonly caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
    The following document may be of some assistance:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • New Version error - problem with audio config

    iTunes has been working great on Vista so when I was prompted to download the new version I thought why not. It unloaded the old version and then loaded the new without a hitch. Went to run the new version and I get the error:
    iTunes cannot run because it has detected a problem with your audio configuration.
    But nothing has changed! Can anyone shed any light on this?

    I can't help you but I have the same problem but with windows xp.
    *** really..

  • Vista - Problem with Audio config!!! please help!!!

    I just finished a clean install of Vista and installed iTunes. When I try to open iTunes an error message pops up saying "iTunes has detected a problem with youraudio configuration.Audio/Video playback may not operate properly." I have looked on teh forums and all I have seen is something about uninstalling QuickTime and then reinstalling it. I have tried that twice and I still get the same error message. If anyone could help that will be great.

    Try this -> http://docs.info.apple.com/article.html?artnum=304424

  • Lenovo A536 problem with audio video playback.

    I've bought lenovo a536 smartphone 3days ago and I couldn't listen to music continuesly.
    The audio or video player is stop playing or pausing unexpectedly. It is only giving problem while using headset.
    Try to fix this critical bug.
    It just ruined the reputation of lenovo.
    Such a worst design ever with lots of bugs.

    I have more informations..
    First a iWire cable is a simple display port to Hdmi 1.4 cable (you can buy it from applestore and it support audio + video).
    SO, I installed windows 7 on bootcamp, and when I plug the iWire cable on my macbook pro while the home theater + videoprojector are ON, windows crash and restart...
    If I plug the iWire cable on the macbook but if only the home theater is ON and the videoprojector is OFF, then it works... The hometheater is recognized as a TV...
    What I don't understand is that my apple TV don't have problem with this config, nether my westerdigital tv.. It's only with a macbook.. display port should not be exactly same thing as a hdmi output maybe.. :/
    I think I will have to buy a longer hdmi cable to plug it on the vp, and a optical cable for the audo to my ht :/

  • Problem with Audio on HP Envy 6-1130sw (C6F62EA)

    Hello everyone.
    I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
    Thanks. 

    Hi piotrek1130sw,
    From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
    Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
    Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
    If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
    If neither driver works I will gladly follow up and provide any assistance I can.
    Please let me know the outcome.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Problem with audio configuration

    when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

    I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
    instructions at: http://docs.info.apple.com/article.html?artnum=93698
    Thanks giterdone

  • Problem with Audio MIDI Setup using multiple accounts

    I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

    Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
    What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
    So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
    Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
    G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap.   Mac OS X (10.4.8)   mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

  • Two problems with audio clips

    Hello,
    I'm having two problems with audio clips:
    1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
    2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
    What am I doing wrong?
    Thanks.

    1. Drag the little hand on speaker icon to drag from
    the Viewer...
    Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
    2. It means your sequence settings don't match the
    properties of the source audio you're putting in it,
    and you either need to change the settings in the
    sequence, or render the audio.
    Ah, that would explain it. Thanks!

  • Premiere pro cc 2014 problems with audio

    I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
    Anyone else experience the same problems?

    Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

  • [Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

    Ok,let's go...
    I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

    thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've  tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1.  i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection.  i have 2 screenshots to show you:
    this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
    the other one is from everest corporate edition:
    both drivers marked with purple colour!
    i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
    i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
    thank you very much and i'll stay alert of your suggestions. by

  • Can't run itunes because it has detected a problem with audio configuration

    What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

    Some people have found the following works:
    Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
    http://docs.info.apple.com/article.html?artnum=93698
    Turn off antivirus/anti spyware
    Go to Control Panel>Add/Remove Programs>Change or Remove Programs
    Select iTunes, then click on Change, then select Repair.
    Restart computer

  • Problem with reading config file

    Hello,
    I have problem with reading config file from the same dir as class is. Situation is:
    I have servlet which working with DB, and in confing file (config.pirms) are all info about connection (drivers, users, passw, etc.). Everything work fine if I hardcoded like:
    configFileName = "C:\\config.pirms";I need to avoid such hardcoding, I tryied to use:
    configFileName = Pirms.class.getClassLoader().getResourceAsStream ("/prj/config.pirms").toString();but it isn't work.
    My config file is in the same directory as Pirms.class (C:\apache-tomcat-5.5.17\webapps\ROOT\WEB-INF\classes\prj)
    Also I tryied BundledResources, it isn't work fo me also.
    Can anybody help me to solve this problem? with any examples or other stuff?
    Thanks in advance.
    Andrew

    Thanks, but I am getting error that "non-static method getServletConfig() cannot be referenced from a static context"
    Maybe is it possibility to use <init-param> into web.xml file like:
    <init-param>
      <param-name>configFile</param-name>
      <param-value>/prj/config.pirms</param-value>
    </init-param>If yes can anybody explain how to do that?
    I need to have that file for:
    FileReader readFile = new FileReader(configFile);Thanks in advance.

  • Problems with Audio in iPhone 5

    I Have a iPhone 5 and today beginning having problems with audio, I can't hear my calls or music, somebody have the same problem?...do you know how I can fix it?

    Do you have the side switch enabled - do you see orange on the switch above the volume keys.
    Make sure all your settings are turned up.
    Try a restart of the phone by holding the home and power button until it reboots
    If that does not work you can reset your settings by going to settings > general > reset > reset network settings and then reset all settings.

  • Itunes has detected a problem w/audio config and may not operate

    any thoughts on this subject? my itunes song comes up on screen from playlist but will not play
    i really need help with support but cannot figure out how to email support
    l. my itunes on my pc does not play....the song comes up but when clicking the arrow to play nor file play it does not go
    2. when opening itunes, it says no audio device detected and itunes may not operate
    3. it also says detecting a problem with audio configuaration and audio may not operate
    3. i also have a corrupt file which appears to be a song and it says to check disk utility but do not know how to do so
    please email back

    For the audio configuration, try playing the song in Windows Media Player and see if you get the same message. If that's the case, you need to contact your computer manufacturer and get the audio drivers for your computer. For the corrupt file on your computer, and it says to run Check Disk, when you restart your computer, it will automatically run the check disk. Allow it to run and it should repair or delete the corrupt files in your computer. Make sure that you have anti-virus or spyware programs on your computer so you won't get corrupt files again. I hope this helps.
    Jess

Maybe you are looking for