Problem with audio configuration that affects audio/video playback

Recently, when I watch video on i tunes that sound and picture to not match up. Sound seems to be on-time but the picture is jerky and behind. I un-installed my video driver and reinstalled. Problem persisted. I started my computer in safe mode and it said there was a problem with the audio configuration that effected audio/video playback. I uninstalled i-tunes and re-installed and the problem still persisted. I'm at my wits end and it is driving me crazy. Windows Vista is automatically updated so that's not the problem. Please help.

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes for Windows: iTunes has detected an audio configuration problem

Similar Messages

Problems with 1.5 and vista - audio recording

Hello. I have PP 1.5. I have an Audio Techinca AT2020USB microphone. I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio. On the computer that runs Vista, I can not. Is anyone aware of any patch or anything that will allow me to make this work?
Please, advise. Thank you.
bobhugejunk

YOU ARE THE MAN!!!! It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
Thank you!
Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
Date: Wed, 21 Oct 2009 19:34:20 -0600
From: [email protected]
To: [email protected]
Subject: Problems with 1.5 and vista - audio recording
As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
Good luck,
Hunt
>

ITunes has detected a problem with your configuration

I recently tried to use my iTune player and when I click the shortcut to open it, the following error message appears: "iTunes has detected a problem with your configuration. Audio/Video playback may not operate properly." The program shows up on my desktop, but when I select something to play, nothing happens.
I use Windows 7. It did work previously, and I do not know of any specific change made to my computer that could have caused this. I am not sure when it developed since I have not tried to use iTunes for a week or more. I checked the community forum and there were similar problems 7 years ago, but could not find any solution (One link to a solution is not longer good.)

Hello LouisvillePS
Start with the troubleshooting in the article below to resolve issues with start. You can use Safe Mode to start up to see if it still pops up as well as testing in a new user on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/dl1614
Regards,
-Norm G.

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........

This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.

Hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

Problem With Cutom Configuration with Object Type

Dear Guru's
I am working WebUI, I am facing a problem with Custom Configuration.
1. The initial requirement to control the visibility for a dropdown event in ERP Quotation.
2. To this i copied the default configuration to custom configuration with custom Object type and Subtype.
       CONFIG KEY: ZPJQTN
       OBJECT TYPE: ZOTYP_CONFIG
       OBJECT SUB TYPE: ZSTYPE_CONFIG1
3. I have created customm fields in enhancement.
4. Now i chosen my new configuration (ZPJQTN,ZOTYP_CONFIG,ZSTYP_CONFIG1), when i click Show available fields, the custom fields are not showing. Instead the created fields are available at other configuration.
5. I am able to control the visibility for the standard available fields.But i am not getting the custom created fields
(Note: I have created the Object type and Object sub type as follows: SPRO->CRM->UI Framework->Define Object Types
Object type: ZOTYP_CONFIG Callback class: ZCL_CONFIG_CALLBACK
Redifned the method: IF_BSP_DLC_OBJ_TYPE_CALLBACK~GET_OBJECT_SUB_TYPES
Coded as below:
data: lv_subtype type bsp_dlc_object_sub_type.
lv_subtype = 'ZSTYP_CONFIG1'.
append lv_subtype to result.
lv_subtype = 'ZSTYP_CONFIG2'.
APPEND lv_subtype to result.
Now Please suggest me how to achieve this.
Also please let me know, whether i am following the correct procedure for controlling the visibility.
Thanks in Advance,
S.Meganadhan.

Hi Harshit,
I added custom fields using AET only.
I am able to see the field got added in the structure. I am able to access GET and SET methods of the field.
But the problem is, it is not getting saved. Am i missed any configuration step?
Please suggest me.
Thanks in advance,
Regards,
S.Meganadhan.

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware software worked more than 3 times did not fix

dears,
I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
Network also always missing.
I am living in KS Wichita. I hope you help me pleas.
Regards.

iPhone warranty is not international. You will have to return your
iPhone to Saudi Arabia for repair/replacement. Either take it back
yourself or send to friend/relative for them to take to Apple. Apple
will not accept international shipments for repair nor will Apple
ship repaired/replaced iPhones out of the country where the repair
was done.

I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

I have a problem with disk utility that is not on my mac pro

I have a problem with disk utility that is not on my mac pro

Open your Applications folder then open the Utilities folder. It should be there.
If not, click the magnifying glass icon top right corner of your screen. That's Spotlight.
Type: Disk Utility
Hopefully it will show up.
Mac Basics: Spotlight

I am having problems with certain websites that require adobe flash player because of the restrictions that apple has put in place. Is there a way to get to sites that require flash player?

I am having problems with certain websits that require adobe flash player

Please don't start the 1 millionth thread on this subject, which has been answered over and over and over and over and over and over and over.........Use the search bar and type flash and you'll see thousands of posts on this.

Problems with the summit that auto generate t:panelTab

Hi,
I have a problem with the summit that auto generate <t:panelTab. When I submit with this button the bean PortfolioPageBean doesn�t recover the property contractListItem. However when I submit with <h:commandButton commandButton action="add", the bean recover information. What is the difference between these two types of submits?. This is my core:
<h:form id="menuTag">
<h:inputHidden id="contractListItem"
 value="#{PortfolioPageBean.contractListItem}" />
<h:commandButton action="add" id="buttonTab" value="Add" />
 <t:panelTabbedPane styleClass="tabbedPane"
 activeTabStyleClass="activeTab" inactiveTabStyleClass="inactiveTab"
 disabledTabStyleClass="disabledTab" activeSubStyleClass="activeSub"
 inactiveSubStyleClass="inactiveSub" tabContentStyleClass="tabContent"
 serverSideTabSwitch="true" id="menuTabs">
 <t:panelTab id="tab1" styleClass="" label="Contract Listing">
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab1">
 <jsp:include page="contract-list.jsp" />
 </f:subview>
 </t:panelTab>
 <t:panelTab id="tab2" label="General Policy Details" style="align:center">
 <h:outputText
 value="#{PortfolioPageBean.contractListItem}"></h:outputText>
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab2">
 <jsp:include page="general-policy.jsp" />
 </f:subview>
 </t:panelTab>
 </t:panelTabbedPane>
</h:form>
Thank for your time!!!

Hi,
I have a problem with the summit that auto generate <t:panelTab. When I submit with this button the bean PortfolioPageBean doesn�t recover the property contractListItem. However when I submit with <h:commandButton commandButton action="add", the bean recover information. What is the difference between these two types of submits?. This is my core:
<h:form id="menuTag">
<h:inputHidden id="contractListItem"
 value="#{PortfolioPageBean.contractListItem}" />
<h:commandButton action="add" id="buttonTab" value="Add" />
 <t:panelTabbedPane styleClass="tabbedPane"
 activeTabStyleClass="activeTab" inactiveTabStyleClass="inactiveTab"
 disabledTabStyleClass="disabledTab" activeSubStyleClass="activeSub"
 inactiveSubStyleClass="inactiveSub" tabContentStyleClass="tabContent"
 serverSideTabSwitch="true" id="menuTabs">
 <t:panelTab id="tab1" styleClass="" label="Contract Listing">
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab1">
 <jsp:include page="contract-list.jsp" />
 </f:subview>
 </t:panelTab>
 <t:panelTab id="tab2" label="General Policy Details" style="align:center">
 <h:outputText
 value="#{PortfolioPageBean.contractListItem}"></h:outputText>
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab2">
 <jsp:include page="general-policy.jsp" />
 </f:subview>
 </t:panelTab>
 </t:panelTabbedPane>
</h:form>
Thank for your time!!!

HT4889 After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?

After using migration assistant I have had problems with some apps that were brought down from App store, as well as IntelliJ that just doesnt want to start at all. Does it have anything to do with the UID being changed?
13-07-03 6:24:12.447 PM com.apple.launchd.peruser.502[1632]: ([0x0-0x5be5be].com.jetbrains.intellij[5805]) Job failed to exec(3) for weird reason: 13

What is the exact name of the application you're trying to launch? Is it in the Applications folder?

Problem with my audio configuration that keeps iTunes from starting.

When I tried to run iTunes on my computer this morning, it said that iTunes was missing files or something like that. But that's not the problem, although that happens often, I know how to fix it. So I went and ran the repair for iTunes, but now when I try to run iTunes, it says, "ITunes cannot rune because it has detected a problem with your audio configuration." This is the first time that's ever happened, and I've reinstalled iTunes a couple times since then. Okay, like seven times, but I keep getting the same error message. I know that I haven't ever changed my audio configuration, but I don't know what to look for, or what to do. I'm pretty much at the end of my technological knowledge, as limited as that is, now, and I don't know how to fix it. It is quite aggrivating, I just imported about 30 CD's just last night, and I need to burn some CD's for my friend. I am attempting, yet again, to download iTunes, if it by some random intervention of God it works, I'll say never mind my ranting.

Click on Start, the go to All Programs, go to Quicktime and uninstall it.
Then go here, download and install quicktime 7.2
www.apple.com/support/downloads/quicktime72forwindows.html
Try to launch itunes.
Let me know how it goes.

Problem with audio configuration that affects audio/video playback

Similar Messages

Maybe you are looking for