Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

Similar Messages

E93z All in One I want Audio playback through speakers and headphones at the same time

Hi there,
As the subject line reads I am hoping to enable playback through both the headphone and internal speakers on the E93z All in One unit I have.
Is there is currently a way to do this with the Lenovo HD Audio software for the Realtek system? It detects the headphones and does the typical shut off of the internal speakers however no option to enable playback through both seems to exist.
Running Windows 7 Pro 32 bit.
I cannot enable stereo mix (by right clicking in the playback area of the sound settings in Windows) to try and come up with a work around.
I have tried re-installing the drivers and not luck with more options to do this.
I have tried un-installing the Lenovo HD audio software and still no luck using the vanilla Windows 7 software.
Any suggestions would be greatly appreciated.

Asad A wrote:
Well basically I want to hook in some external speakers via the headphones jack and the more speakers the better, I just figure if there's a way to have 4 speakers instead of just two it'd be cool, why let the internal speakers go to waste?
Do you know if plugging in headphones physically cuts off the internal speakers or if it's a software/driver thing?
Thanks to all who've replied
I'm pretty sure it's all in the OS, since the level control is right at the top. You can actually customize sound profiles individually for headphones or the built-in speaker, or any other sound devices. You can also use Bluetooth headphones (or a headset) or USB output devices. As far as I know, only one can be selected (in System Preferences) even if multiple ones are plugged in.

I have a problem with my viber.It has stopped working.I tried reinstalliing it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .

I have a problem with my viber.It has stopped working.I tried reinstalling it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .My other applications are working fine ..other applications that require internet too are working fine.

Please get in touch with Viber's customer support.

Recording audio and midi at the same time ??

Is it possible to record audio and midi at the same time in logic?? It doesnt seem to work for me, im assuming there must be unchecked box somewhere that I need to check. thanks,
Dan

Daniel,
You should be able to accomplish this by hitting record on the audio track, and then while holding the "Shift" key down, hitting record on the MIDI track (or visa versa).

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not work anymore. Why not, and is there a way to do both with the most current version?

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.

Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?

Reading and recording at the same time with AudioUnit

Hi,
I am trying to read and record at the same time on the iPhone with AudioUnit. For the reading part I made an AUGraph which works fine, constructed like that:
NewAUGraph(&_graph);
_outputUnitComponentDescription.componentType = kAudioUnitType_Output;
_outputUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
_outputUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_outputUnitComponentDescription.componentFlags = 0;
_outputUnitComponentDescription.componentFlagsMask = 0;
AUGraphAddNode(_graph, &_outputUnitComponentDescription, &_outputNode);
_mixerUnitComponentDescription.componentType = kAudioUnitType_Mixer;
_mixerUnitComponentDescription.componentSubType = kAudioUnitSubType_MultiChannelMixer;
_mixerUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_mixerUnitComponentDescription.componentFlags = 0;
_mixerUnitComponentDescription.componentFlagsMask = 0;
AUGraphAddNode(_graph, &_mixerUnitComponentDescription, &_mixerNode);
AUGraphConnectNodeInput(_graph, _mixerNode, 0, _outputNode, 0);
AUGraphOpen(_graph);
AUGraphNodeInfo(_graph, _outputNode, NULL, &_outputUnit);
AUGraphNodeInfo(_graph, _mixerNode, NULL, &_mixerUnit);
_generatorUnitComponentDescription.componentType = kAudioUnitType_MusicDevice;
_generatorUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
_generatorUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_generatorUnitComponentDescription.componentFlags = 0;
_generatorUnitComponentDescription.componentFlagsMask = 0;
for(int i=0; i< [_urlList count]; i++)
SoundBuffer* soundBufferTemp = [_bufferSoundList objectAtIndex:i];
AURenderCallbackStruct renderCallbackStruct;
renderCallbackStruct.inputProc = MyFileRenderCallback;
renderCallbackStruct.inputProcRefCon = soundBufferTemp;
AudioStreamBasicDescription* inputAsbd = [soundBufferTemp getASBD];
err = AudioUnitSetProperty(_mixerUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
i,
inputAsbd,
sizeof(AudioStreamBasicDescription));
UInt32 zero = 0;
err = AudioUnitSetProperty(_mixerUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Input,
kInputBus,
&zero,
sizeof(zero));
err = AUGraphSetNodeInputCallback(_graph,
_mixerNode,
i,
&renderCallbackStruct);
This works well, for the recording AudioUnit I did the following:
OSStatus err;
AudioComponentDescription audioComponentDescription;
AudioComponent audioComponent;
audioComponentDescription.componentType = kAudioUnitType_Output;
audioComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
audioComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
audioComponentDescription.componentFlags = 0;
audioComponentDescription.componentFlagsMask = 0;
audioComponent = AudioComponentFindNext(NULL, &audioComponentDescription);
err = AudioComponentInstanceNew(audioComponent, &_audioUnit);
UInt32 size;
size = sizeof(AudioStreamBasicDescription);
err = AudioUnitGetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
1,
&_soundFileDataFormat,
&size);
_soundFileDataFormat.mSampleRate = 44100.00;
AudioUnitSetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
kInputBus,
&_soundFileDataFormat,
size);
AudioUnitSetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Output,
kOutputBus,
&_soundFileDataFormat,
size);
AURenderCallbackStruct renderCallbackStruct;
renderCallbackStruct.inputProc = MyRecorderCallback;
renderCallbackStruct.inputProcRefCon = self;
UInt32 one = 1;
UInt32 zero = 0;
err = AudioUnitSetProperty(_audioUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Input,
kInputBus,
&one,
sizeof(one));
err = AudioUnitSetProperty(_audioUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Output,
kOutputBus,
&zero,
sizeof(zero));
err = AudioUnitSetProperty (_audioUnit,
kAudioOutputUnitProperty_SetInputCallback,
kAudioUnitScope_Global,
0,
&renderCallbackStruct,
sizeof(AURenderCallbackStruct));
err = AudioUnitInitialize(_audioUnit);
Then in I setup a file to write in:
- (void) openFile
OSStatus err;
err = ExtAudioFileCreateWithURL((CFURLRef) _soundFileUrl,
kAudioFileCAFType,
&_soundFileDataFormat,
NULL,
kAudioFileFlags_EraseFile,
&_extAudioFileRef);
err = ExtAudioFileSetProperty(_extAudioFileRef,
kExtAudioFileProperty_ClientDataFormat,
sizeof(AudioStreamBasicDescription),
&_soundFileDataFormat);
err = ExtAudioFileWriteAsync(_extAudioFileRef,
0,
NULL);
All this things works well (I check by printing err in the log which I removed here for clarity).
And then in the callback for recording I do the following:
static OSStatus MyRecorderCallback(void *inRefCon,
AudioUnitRenderActionFlags* inActionFlags,
const AudioTimeStamp* inTimeStamp,
UInt32 inBusNumber,
UInt32 inNumFrames,
AudioBufferList* ioData)
OSStatus err= noErr;
AudioUnitRecorder* auRec = (AudioUnitRecorder*) inRefCon;
[auRec allocateAudioBufferList:1 size:inNumFrames*4];
err = AudioUnitRender(auRec.audioUnit,
inActionFlags,
inTimeStamp,
inBusNumber,
inNumFrames,
auRec.audioBufferList);
err = ExtAudioFileWriteAsync(auRec.extAudioFileRef,
inNumFrames,
auRec.audioBufferList);
return err;
(Then I close the file after recording at the same time I close the AudioUnit)
Now the strange thing is that all this works perfectly well in the simulator: I can record and play at the same time but on the device, the callback for recording is not ran (I check by trying to print something in the log in the callback function.) which men no writing in the file and an empty file in the end.
Any one has any idea of what could be causing this?
Thanks
Alexandre

Just in case some one might need it, I solved my problem:
I simply needed to initialize the AudioSession before playing/recording. I did so with the following code:
OSStatus err;
AudioSessionInitialize(NULL, NULL, MyInterruptionListener, self);
UInt32 sessionCategory = kAudioSessionCategory_PlayAndRecord;
err = AudioSessionSetProperty (kAudioSessionProperty_AudioCategory,
sizeof (sessionCategory),
&sessionCategory);
AudioSessionSetActive(TRUE);

Can I use HP Pro 8600 with usb and wireless at the same time

Can I use HP Pro 8600 with usb and wireless at the same time? Sometimes I cannot get the wireless to work, it seems to be my laptop. It would be nice if I could use the usb, but it doesn't work. What should / can I do, if anything?
Sam

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT204053 How do i make icloud work if my husband and I share the same itunes account but we dont want to get each others contacts, messages, apps etc?

How do i make icloud work if my husband and I share the same itunes account but we dont want to get each others contacts, messages, apps etc?

Each of you should set up your separate iCloud account on your own computer using your Apple ID. This gives you two independent iCloud accounts.
Note that an iPad is not a multi-user device. It can only be synced with one account.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

[Solved] Sound with ALSA and PulseAudio at the same time?

Hi, I am using arch linux to play Counter Strike on.
While it works fine and all, I just don't get any sound in CS because I am using Mangler, which only seems to work with my microphone if I use PulseAudio.
I hope this is a rather simple issue, basicly, I just want to enable sound in PulseAudio and ALSA at the same time, is this possible?
Last edited by Paaskehare (2010-08-12 15:39:09)

I have read that PulseAudio decreases sound quality, and therefore I would not like to use this as a systemwide driver, but rather only where it is needed.
Please correct me if I am wrong
Edit:
Ok, sound quality isn't noticeably worse, so this will do. HOWEVER, while I am in Counter Strike my sound is delayed by ~1 second, and it is therefore useless, any thoughts on that matter?
Edit again .. Solved this time:
I set my ALSA plugin in winecfg to "Hardware Acceleration: Emulation" - that seemed to do the trick.
Last edited by Paaskehare (2010-08-12 15:38:56)

When i hold down command and r at the same time after restarting it comes up with a

When i hold down command and r at the same time after restarting it comes up with a black screen and a lock symbol and a field bellow where you would input a password, i have tried ALL of my possible passwords including my password i use for the mac and it stil will not work! all that happens is the text i put in bellow erases itself after hiting enter or clicking the arrow.

I've tried my apple ID password and that doesn't work either . I don't recall seting a password for an encrypted disk either :/ if it was for an encrypted disk, would it be in keychain anywhere? if so how can i find it?
Thanks!

Pavilion dv6 with Windows 7 - some softs use laptop speakers some headphones (at the same time)

To be more specific, I usually use my headphones with my laptop. The main problem is that when I use winamp and skype at the same time there's a weird thing happening:
If I get a skype sound, the sound switches from the headphones to the laptop speakers. After the skype sound is over it automatically returns tot the headphones. I'm using Windows 7, and I looked at Volume Control Options and i have 3 devices: SPDIF, Independent Dual Headphones and Speakers and Dual Headphones and I can not choose which one to use (for all softwares).
This is annoying (specially at night when I don't want to make any noise), if I get a skype call my speakers go wild and after the bip-sound from the call it all switches back to the headphones.
Can you help me set up this sound issue ?

Solution has been found. Disable "Communications Heaphones" from Sound in the Control Panel.

Are "working copies", "project files" and "editing files" the same thing?

Hello.
I have just joined the Adobe Forums as a newbie starting right at the bottom. I am still unfamiliar with the terms "working copies", "project files" and "editing files".
I wonder if someone will help me to know the difference between these terms.
I have just started the Dreamweaver tutorial, "Creating your first website, Part 1: Set up your site and project files" (http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.htm).
The tutorial read, "You've now defined a local site folder for the Check Magazine site. This is where you keep the working copies of web pages on your local computer.".
Are "working copies", "project files" and "editing files" the same thing?

Murray *ACP* wrote:
Why would the raid level make any difference at all? My data files are all stored on a RAID 4 system and seems to do pretty well.
Murray *ACP*,
If I may elaborate on this,
being completely new to Dreamweaver, my reason for having wondered whether it would be a good idea or a bad idea to have these files on disks that are in RAID 0, was because the term project files in the Dreamweaver Tutorial had me thinking of Premiere Pro project files and the performance increase working with such project files in a RAID 0 setup, which (provided there is backup) is especially beneficial if you have large or complex projects, long time-lines and a tight deadline,
especially considering that as fill rates of disks go up, and as the number of disk activities on a disk go up, performance goes down, sometimes by 50%, and that the more tracks you have in your project, the more strain is put on your disk, and the more applications you have open, the more your pagefile is used, especially on systems with limited memory.
Therefore, as RAID 0 offers the best performance increase over a single disk, I immediately thought of the concept of project files related to Premiere Pro when I came across the term project files in the Dreamweaver Tutorial, being unfamiliar with the definition of project files in Dreamweaver world, hence my need to define project files related to Dreamweaver with reference to disk setup and file management.
However, if I understand correctly, my conclusion is that RAID 0 is not necessary for Dreamweaver project files, since the local site is not disk intensive, unless you have a huge website to build ?
Also, if I understand correctly, in website design, you want to minimize local files and use your hosting company to store and retrieve info from ?

Im worried about the battery percentage while play a game on my iphone 4s.so that,i decided to play a games and charging at the same time.is it problem on my battery ? im to worried.please give a conclusion.

Im too worried about the battery percentage while playing a game on my iphone 4s.so that,i decided to play a games and charging at the same time.im too worried for my battery problem on the future.please give a conclusion.

It is perfectly fine to use the phone while charging it.

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Similar Messages

Maybe you are looking for