Problem with audio on avi file

Hi all. I am using Premiere CS 5.5. I work on Windows 7 64bit. I have an AVI file recorded from a game but when i try to drag and drop it from the list to the timeline, only video appears. Nothing on audio track bellow. The strange thing is that when i press to play, video has sound in it. Am i doing something wrong???
Thank you!!!

no matter if i do or not audio still remains empty.
here's a screenshot i took.

Similar Messages

  • Problem with importing a AVI file

    Hi everyone,
    I did a capture to hard drive of a VHS home movie via Turtle Beach PCI card software, saving as .avi file that is roughly 2 hrs long, when I import into Premier Pro CS3, I only see the first 2 minutes. Anyone have a suggestions on what I can do to.
    Thanks,
    George

    George,
    I just finished a project, similar to yours and used the same hardware, TB PCI, and their software for the Capture. In my case, I chose AVI uncompressed and every file Imported into Premiere fine. Do you recall which CODEC you selected in the TB software. The only problem with AVI uncompressed is very, very large file sizes and I had 32 VHS tapes, some EP and some LP.
    Quite a few folk on this forum have had excellent results with the Canopus products, but I already had the TB, so I did not change.
    If G-Spot throws a fit, then you probably have a corrupt file. I assume that G-Spot installed OK, and the errors were with your AVI file. If not, try install again with all AV, Spyware, etc. software turned off. Try to Capture again with AVI uncompressed and see if your result is different.
    Hunt

  • Problems with audio in quicktime file for dvd authoring

    i have converted sequence into quicktime file for burning into dvd. i have am experiencing some problems with voice over which disappers and comes back later in the quicktime file when i play it. this quicktime file is made as self contained movie. I have traced this back to the original sequence in the timeline to a white line or series of line in at the top of the time line. one is for video and the other is for audio. when the first line appears the voice over gets interrupted and audio stops in the quicktime file but its ok in the timeline. when the white line shows again the voice over can be heard again in the quicktime file and audio stops again at the start of another white line. there is no loss of audio in the sequence in the timeline. so please can someone help me understand what the problem is.

    thanks tom. i am refering to render bar in the timeline, upper for video and lower for audio. May be i shoud describe them as white line gaps between dark grey or steel grey bar color.
    what do you mean by down mixing? please advise

  • Premiere pro CC (2014) problems with audio on .mts files

    Hi,
    This is a recent problem I have been having when trying to play certain clips in Premiere Pro CC (2014), I import the entire private folder and some of the clips play as normal and others seem to have skipping audio. This causes the second half of the clip to not have any audio in it at all because it is bunched up at the beginning. I don't even know where to start with trying to fix the problem, the only thing I have done is re import the files and put them in new folders to change the destination it has been imported from.
    Any advice would be extremely helpful as it is mostly stopping me from getting on with any work,
    Thanks!

    Hi amber1992,
    I will suggest you to go ahead and clean the Media cache and Media cache files folders manually.
    MAC OS: Click on Go menu>Go to Folders>type ~/Library and click ok. This will open User Library folder and then navigate to Application Support>Adobe>Common>Media Cache and Media Cache files. Delete all the files from these folders.
    Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can Click on Start button and in search type %appdata% and open Roaming folder>Adobe>Common>Media Cache and Media Cache files.
    Once done launch the project again and check.
    Regards,
    Vinay

  • Problem with import of AVi file

    I have bought a cheap video camera Creative Vado. I can copy film file in AVI to my computer . I can see the file, but I can`t import it in iMovie. Can someone help me - I will be greatful!

    first rule of using a forum: read recent topics !
    http://forum.java.sun.com/thread.jspa?threadID=668488&tstart=0

  • No sync with audio for input files AVI MPEG4 23.976 fps

    No sync with audio for input files AVI MPEG4 23.976 fps.
    If i open in Premiere Pro CC any file AVI MPEG4 23.976 fps (with internal audio MP3 or AC3) i got growing out of sync from start to end of file, even while play it at internal media player of Premiere Pro CC for source file.
    Using external audio files AC3 or MP3 not help.
    In properties of source file i see 23.97 fps instead of 23.976 fps, and time of internal file is wrong.
    If i try Clip > Modify > Interpreter Footage > custom settings to 23.976 time i see right time, but when i click "OK", custom fps saved as 23.98 fps instead of 23.976 fps and time of source goes wrong again.
    So i always get bad sync such files in Premiere Pro CC while play or export them.
    But in all media players, other editors, and in PluralEyes sync OK with all such files.
    If i open M2TS or MP4 (H264 23.976 fps) source file, all OK, it it shows as 23.976 fps, time is right, and sync OK.
    So i want to add automatic detection 23.976 fps instead of 23.97 fps for source AVI files with 23.976 fps.
    Is it possible?

    Yes, i know what XviD and DivX does not edit well in Premiere Pro. And because of that i create this topic "No sync with audio for input files AVI MPEG4 23.976 fps" and was hoping to get help in solving the problem, rather than stating that the problem really is.
    XviD and DivX it is MPEG4.
    Xvid (formerly "XviD") is a video codec library following the MPEG-4 standard, specifically MPEG-4 Part 2 Advanced Simple Profile (ASP).
    http://en.wikipedia.org/wiki/Xvid
    I have many old useful materials in XviD and DivX formats, and have no other formats versions for that material.
    XviD and DivX are very compact formats to store video at acceptable quality and it is fully compatible with all players and editors for PC except Premiere Pro.
    You suggest to convert them to another format (DV) to make compatible with Premiere Pro... It is not what i want.
    Let me explaine:
    1) Size of files
    uploaded AVI XviD 1280x720 file with very good quality have size 1.9Gb (with audio AC3 2.0). If i convert it via VirtualDub from "AVI XviD" to AVI DVCPRO HD 1280x720 (without audio) it have size 35Gb, and quality is worst than at XviD-HD, and also converting take much time.
    2) Compatibility with AC3 and MP3 audio inside AVI
    AVI DV / AVI DVCPRO not compatible with AC3 and MP3 audio inside, only with PCM
    http://en.wikipedia.org/wiki/DV
    AVI XviD and DivX can use AC3, MP3, OGG audio without any problems.
    Size of 1Hour 30Min "AC3 Stereo 48kHz 16bit 384Kbps" file is 257Mb
    Size of 1Hour 30Min "PCM Stereo 48kHz 16bit" file is 1030Mb
    3) I have and use hardware H264 encoder card "Matrox CompressHD" for export my material
    http://www.matrox.com/video/en/products/compresshd/specs/
    This card works only from Adobe Premiere Pro, so i can not use it from VirtualDub or other editing software.
    So i need a full compatibility Adobe Premiere Pro with all popular standard formats of input files.
    Here we see:
    http://www.adobe.com/products/premiere/extend.html#Supportedvideoformats
    Supported video formats:
    "Adobe Premiere Pro CC leads the industry with incredible, thorough native media support, meaning you can edit virtually all of the major video, image, and audio formats natively without waiting."
    As most PC users knows, AVI XviD it is a very popular free video format, and would be very useful if Adobe will make normal compatibility with that format in Premiere Pro.

  • Problem with Audio MIDI Setup using multiple accounts

    I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

    Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
    What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
    So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
    Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
    G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap.   Mac OS X (10.4.8)   mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

  • No longer audio on .avi files when attempting to use Elements 9

    I have compiled 20 years of videos from family videos and converted them to .avi files.  I now want to edit these files into other smaller videos to give to my children.  I have Premiere Elements 9.  When I get one of these files using PE9 there is no longer audio on them. 
    There is audio if I play them on Windows Media Player but no audio on Quicktime Player. 
    I can edit in Windows Movie Maker but not in PE9.
    The Quicktime Player states the following:
    Format: Motion JPEG Open DML, 640 x 480, millions
    Movie FPS 29.97
    Playing FPS 29.97
    Data Size 1.94 gb
    Data Rate 8.67 mbits/sec
    Normal Size 640 x 480 pixels
    Current Size 640 x 480 pixels
    I have a Dell Inspiron 530, 4.0 gb RAM, 32- Bit Windows Vista system.  Plenty of Hard Drive availability.
    I purchased PE9 because I thought it would be superior to Windows Movie Maker.  Very frustrated.

    Hi Bill,
    The .avi file is a compilation of videos from multiple cameras from over the years.  There is no 1 camera.  That is why I am confused here.
    Carmen
    Date: Wed, 7 Mar 2012 10:08:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: No longer audio on .avi files when attempting to use Elements 9
        Re: No longer audio on .avi files when attempting to use Elements 9
        created by Bill Hunt in Premiere Elements - View the full discussion
    What camera produced the MJPEG files, wrapped in the AVI container? The reason that I ask this, is because camera mfgrs. love to tweak CODEC's, and some take that tweaking to an extreme. If you have the utility disc, that came with the camera, it is probably best to install their particular version of the MJPEG CODEC. The Morgan, or the MainConcept might work OK, but having the exact version, from the camera mfgr. will get you as close, as is possible, and will save having to buy an MJPEG CODEC, that might not be perfect. Now, on that utility disc, one might have one of three possible choices: The MJPEG CODEC might be a separate installationThe MJPEG CODEC might install along with the camera's driverThe MJPEG CODEC might install with an included editing/cataloguing program (most common nowadays), and even if you do not use that utility, having the proper version of the MJPEG CODEC installed on the system, will get you as close, as is possible Good luck, and let us know if you have the utility disc for that camera. Hunt
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4251352#4251352
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4251352#4251352. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • [Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

    Ok,let's go...
    I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

    thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've  tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1.  i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection.  i have 2 screenshots to show you:
    this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
    the other one is from everest corporate edition:
    both drivers marked with purple colour!
    i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
    i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
    thank you very much and i'll stay alert of your suggestions. by

  • Problems with audio programs after update to Maverics

    After updating to Mavericks on my Mac Mini there is problem with audio programs. I cant open iTunes at all, I click it and it disappear in a second. Also when I press play in GuitarPro 6 or in Vox player nothing happens. It just wont start playing. I really dont like this update.. and my mac is slower now. I cant downgrade my system back so this is really frustrating to me as a musician.

    I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
    Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
    I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
    I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
    Hope it helps you.

  • Problem with Audio on HP Envy 6-1130sw (C6F62EA)

    Hello everyone.
    I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
    Thanks. 

    Hi piotrek1130sw,
    From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
    Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
    Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
    If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
    If neither driver works I will gladly follow up and provide any assistance I can.
    Please let me know the outcome.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Problem with Preview and PSD files - random gray square

    Hi guys, hope you can help...
    I've got a problem with Preview and PSD files.
    If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
    If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
    I've tried the same psd on my older iMac with leopard...and got no problem at all.
    I suspect it got something to do with my Ati...
    (this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
    Thanks for your help.
    DAve.

    maybe I'm onto something...
    I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
    It seems like the i7 is much faster than the Ati....
    Any more realistic ideas?

  • I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

  • I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

    I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

    Hi Arika,
    The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
    All these drivers are available for downloading on ni.com. To get the drivers, go to ht
    tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
    I hope this information helps.
    Best Regards,
    Wilbur Shen
    National Instruments

  • Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

    Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Maybe you are looking for