Problem with audio setup of IDT

Sorry, if this question isn't for this forum, but I need the solve of this problem
HP Pavilion dv6-6c53er.
Hello, it's me again. 
My notebook is dv6-6c53er with two earphones outs and one microphone. So, I want to ask you a question. Can I set my earphones outs for different tasks or can I set them as independed outs. My English isn't so good, but that isn't so good, when i'm listening my music and when i get a message in skype - my music in earphones out is lost, but I hear Skype (soung of message), and music is playing on beats speakers, and past 2 seconds - again (in earphones - music, on speakers - nothing).
So, the problems are: 
1) How I can set settings for each earphone out (to do it independed or to play different sounds)?
2) What Can I do with problem with Skype and outs?
3) Help me, please with settings in Traktor, because at Native Instruments forum I didn't receive resolve of my problem...
And problem with Traktor is:
I can't to set each earphone out for playing each deck in Traktor.
Help me, please with this problems!
Yours, Xardas007

I have the same problem. I was however able to install 9i. Then I was able to use the 9i Installer to install the 8.17 software. But I can not run the 8.17 Database Configuration Assistant. It will not start same as the 8.17 setup.exe.

Similar Messages

  • Problems with audio setup

    I have just installed Archlinux on my Intel 64-bit PC, with an onboard audio controller. The installation went smooth, and when I got to the point of configuring the audio, I went for ALSA, as I've had some experience with it from another distro. I followed the walkthrough on the Archlinux wiki, however I ran into some problems. First off, I didn't know which module was the right one for my audio controller. At first I tried snd_intel8x0, but I later changed this to snd_hda_intel, as that was the one which showed up when I ran alsaconf. This is a little difficult to explain, but at some point, sound did actually come out of my speakers, but after a series of reboots (due to some complications with X), I didn't have sound anymore. My problem is that, as far as I can see, my audio configuration is as it should be, I just can't hear any sound. The reason why I figure the configuration is correct, is that everything "works" in gnome-volume-control. It says "HDA Intel (Alsa mixer)" and I can adjust volume for Master (however, not PCM). Another sign is that when I play a audio or video file in Totem, the volume control is working, which is not the case when audio is unavailable. However, when I run alsaconf now, it says it doesn't find any supported PCI card (which it did before).
    What am I missing here? Why do I not have any sound? Am I using the wrong module? Here's some (useful) info:
    $ lspci | grep -i audio
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
    # lsmod | grep snd
    snd_hda_intel 29256 0
    snd_pcm_oss 42656 0
    snd_hda_codec_realtek 256852 1
    snd_hda_codec 68112 2 snd_hda_intel,snd_hda_codec_realtek
    snd_hwdep 8632 1 snd_hda_codec
    snd_seq_oss 33760 0
    snd_seq_midi_event 7248 1 snd_seq_oss
    snd_seq 57024 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 7268 2 snd_seq_oss,snd_seq
    snd_mixer_oss 16784 1 snd_pcm_oss
    snd_ac97_codec 121720 0
    ac97_bus 1904 1 snd_ac97_codec
    snd_pcm 80920 4 snd_hda_intel,snd_pcm_oss,snd_hda_codec,snd_ac97_codec
    snd_timer 22816 2 snd_seq,snd_pcm
    snd 65928 12 snd_hda_intel,snd_pcm_oss,snd_hda_codec_realtek,snd_hda_codec,snd_hwdep,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_ac97_codec,snd_pcm,snd_timer
    soundcore 7680 1 snd
    snd_page_alloc 9760 2 snd_hda_intel,snd_pcm
    # ls -l /dev/snd/
    total 0
    crw-rw---- 1 root audio 116, 10 2009-05-14 21:54 controlC0
    crw-rw---- 1 root audio 116, 9 2009-05-14 21:54 hwC0D0
    crw-rw---- 1 root audio 116, 8 2009-05-14 21:54 pcmC0D0c
    crw-rw---- 1 root audio 116, 7 2009-05-14 21:54 pcmC0D0p
    crw-rw---- 1 root audio 116, 6 2009-05-14 21:54 pcmC0D1c
    crw-rw---- 1 root audio 116, 5 2009-05-14 21:54 pcmC0D1p
    crw-rw---- 1 root audio 116, 4 2009-05-14 21:54 pcmC0D2c
    crw-rw---- 1 root audio 116, 3 2009-05-14 21:46 seq
    crw-rw---- 1 root audio 116, 2 2009-05-14 21:46 timer
    # grep MODULES= /etc/rc.conf
    MODULES=(!pcspkr !snd_pcsp snd_hda_intel)
    # amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 31
    Mono: Playback 31 [100%] [0.00dB] [on]
    Simple mixer control 'Front',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 0 [0%] [-46.50dB] [on]
    Front Right: Playback 0 [0%] [-46.50dB] [on]
    Simple mixer control 'Front Mic',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 0 [0%] [-34.50dB] [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off]
    Simple mixer control 'Front Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 0 [0%]
    Front Right: 0 [0%]
    Simple mixer control 'Surround',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 0 [0%] [-46.50dB] [on]
    Front Right: Playback 0 [0%] [-46.50dB] [on]
    Simple mixer control 'Center',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 31
    Mono: Playback 0 [0%] [-46.50dB] [on]
    Simple mixer control 'LFE',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 31
    Mono: Playback 0 [0%] [-46.50dB] [on]
    Simple mixer control 'Side',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 0 [0%] [-46.50dB] [on]
    Front Right: Playback 0 [0%] [-46.50dB] [on]
    Simple mixer control 'Line',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 0 [0%] [-34.50dB] [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off]
    Simple mixer control 'Mic',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 0 [0%] [-34.50dB] [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off]
    Simple mixer control 'Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 0 [0%]
    Front Right: 0 [0%]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined cswitch cswitch-joined
    Playback channels: Mono
    Capture channels: Mono
    Mono: Playback [off] Capture [off]
    Simple mixer control 'IEC958 Default PCM',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 31
    Front Left: Capture 0 [0%] [-16.50dB] [on]
    Front Right: Capture 0 [0%] [-16.50dB] [on]
    Simple mixer control 'Capture',1
    Capabilities: cvolume cswitch
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 31
    Front Left: Capture 0 [0%] [-16.50dB] [on]
    Front Right: Capture 0 [0%] [-16.50dB] [on]
    Simple mixer control 'Input Source',0
    Capabilities: cenum
    Items: 'Mic' 'Front Mic' 'Line'
    Item0: 'Mic'
    Simple mixer control 'Input Source',1
    Capabilities: cenum
    Items: 'Mic' 'Front Mic' 'Line'
    Item0: 'Mic'
    Last edited by martibs (2009-05-14 20:13:00)

    You have a lot of channels set to 0% volume there. Gnome-volume-control only shows a few channels by default (which is why you can only change 'Master' in it at the moment) - click preferences and make sure everything is selected.  Then turn up the volume in channels like 'Front' and 'Surround' to see if that's the issue.
    Fishonadish

  • Problem with Audio MIDI Setup using multiple accounts

    I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

    Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
    What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
    So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
    Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
    G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap.   Mac OS X (10.4.8)   mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

  • Problem with Audio on HP Envy 6-1130sw (C6F62EA)

    Hello everyone.
    I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
    Thanks. 

    Hi piotrek1130sw,
    From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
    Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
    Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
    If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
    If neither driver works I will gladly follow up and provide any assistance I can.
    Please let me know the outcome.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Problem with audio configuration

    when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

    I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
    instructions at: http://docs.info.apple.com/article.html?artnum=93698
    Thanks giterdone

  • Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

    Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
    my new house is expansive so i wanted the extended range and airplay in each room.
    This is not told to customers, and utility doesnt show any issues.
    I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
    Any advice ?
    LJx
    Message was edited by: LJLDN
    Message was edited by: LJLDN

    Sorry couldn't change the detonations to Airport and am new so cant delete!

  • Two problems with audio clips

    Hello,
    I'm having two problems with audio clips:
    1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
    2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
    What am I doing wrong?
    Thanks.

    1. Drag the little hand on speaker icon to drag from
    the Viewer...
    Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
    2. It means your sequence settings don't match the
    properties of the source audio you're putting in it,
    and you either need to change the settings in the
    sequence, or render the audio.
    Ah, that would explain it. Thanks!

  • Premiere pro cc 2014 problems with audio

    I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
    Anyone else experience the same problems?

    Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

  • [Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

    Ok,let's go...
    I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

    thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've  tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1.  i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection.  i have 2 screenshots to show you:
    this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
    the other one is from everest corporate edition:
    both drivers marked with purple colour!
    i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
    i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
    thank you very much and i'll stay alert of your suggestions. by

  • Can't run itunes because it has detected a problem with audio configuration

    What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

    Some people have found the following works:
    Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
    http://docs.info.apple.com/article.html?artnum=93698
    Turn off antivirus/anti spyware
    Go to Control Panel>Add/Remove Programs>Change or Remove Programs
    Select iTunes, then click on Change, then select Repair.
    Restart computer

  • Problems with Audio in iPhone 5

    I Have a iPhone 5 and today beginning having problems with audio, I can't hear my calls or music, somebody have the same problem?...do you know how I can fix it?

    Do you have the side switch enabled - do you see orange on the switch above the volume keys.
    Make sure all your settings are turned up.
    Try a restart of the phone by holding the home and power button until it reboots
    If that does not work you can reset your settings by going to settings > general > reset > reset network settings and then reset all settings.

  • Problems with audio panning.

    Am having problems with audio tracks. For example: when capturing a clip where a person is talking, there would be 2 tracks of audio - one a radio mic (Track 1) and another mic (Tack 2)capturing ambient sound. I often delete the ambient track (Track 2) and am left with the the main audio from a radio mic (Track 1).
    The problem is when I open up the main audio track (Track 1) and pan the audio track from -1 to 0 or even to +1! It says it has done it but the sound still comes out of the left speaker.
    It is a very recent problem that I wonder may be something to do with preferences or settings.
    We have had no problems with the speakers at all.
    Thanks very much,
    Geoff

    You have your audio outputs set to 'dual mono', not 'stereo'.... go to:
    Sequence>Settings> 'Audio Outputs' tab > then highlight the 'Stereo' button, then click OK...
    problem solved...

  • Problems with audio programs after update to Maverics

    After updating to Mavericks on my Mac Mini there is problem with audio programs. I cant open iTunes at all, I click it and it disappear in a second. Also when I press play in GuitarPro 6 or in Vox player nothing happens. It just wont start playing. I really dont like this update.. and my mac is slower now. I cant downgrade my system back so this is really frustrating to me as a musician.

    I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
    Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
    I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
    I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
    Hope it helps you.

  • Problem with Audio in Buttons and Interactive

    Hi!!
    I have problems with the sound into buttons and Forms Interactive. The question is when I add a sound within a button, this it sounds directly when it enters the slides and not when the user presses the button.
    How I solve it?
    Thanks
    NEXTsp

    Hi there
    It isn't a problem. The function is working as it should. You simply have a different expectation!
    You have to think about it in different ways. When do you want the audio to play? When the button has been clicked, right? When you attach audio to an object such as a Button or an Image, the audio plays when that object appears. The trick here is to make an object appear on the Button click. You then attach the audio to that.
    If you have Captivate 3 or older, you can enable the Success caption for the button. Attach the audio to the caption. Button is clicked, caption appears and you hear the audio.
    What's that you are asking? Oh, you don't want to actually SEE a Success Caption? No problem. Choose the Transparent caption type and remove any text!
    If you have Captivate 4, you can also use the same method to accomplish this. But you can also probably use the new scripting in it to make the audio play on a Button click. I can't tell you how to do that at the moment if that's the approach you want to take. I'll have to leave that to another person here that has played with the scripting to explain how it's done.
    Likely it involves opening a panel, inserting or declaring a variable, adding a sound file, associating the variable with the sound file, assigning actions to the button to check the variable and change it if you need to. Stuff like that. Sounds a bit like a Rube Goldberg setup. But really that's what happens with the Success Caption method. It's just that we deal with objects and not the code behind the scenes.
    Hopefully this was somewhat helpful... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Problems with audio on DV import

    Hi
    I have both FCPX and Final Cut Studio 3 installed on my system. I am starting to capture some SD 4:3 DV footage from a Panasonic GS500 Camcorder connected via firewire 400. I have set my import up as Standard PAL video with audio set to Stereo, 32kHz, Apple ProRes 422 ( audio matches the 12bit recording from the camera ). However when the import begins the audio starts to break up on ingest and eventually cuts out completely, even though the origional tape is fine.
    I have also tried on my laptop with the same results.
    My workround is to capture the footage in iMovie 11 and then import the footage direct into FCPX, this works no problem but I would like to just import straight into FCPX!
    Has anyone else had this problem or any ideas what to do?
    Many thanks

    The audio on the tape is 12bit not 16bit. I thought that if the audio is 16bit you import as 48kHz and if 12bit you import as 32kHz. The audio when captured in iMovie comes through to FCPX as 32kHz 12bit. Also when I have tried to import in FCP7 from the same tapes with an easy setup of DV 48kHz the audio is out of sync whereas DV 32kHz is fine.
    I will try your suggestion however.
    Many thanks for your quick reply.
    Neil

Maybe you are looking for