Problem with authorising a device that was previously recognised.

Ok,I upgraded to windows 8,bought nano th geneeration,everything worked great with iTunes.Computer crashed,had to restore to factory settings and back to windows 7,downloaded all my programmes again including i tunes,now my nano is showing as it should on i tunes,it is saying that it is syncing but it is not.I check devices and it says that only my computer is authorised,how do I get i tunes to recognise my nano to allow syncing.Also,it says that I have authorised 4 computers but know that I have only authorised two,my notebook and my laptop-should I de-authorise them all and start again,advice appreciated,thanks in advance.

1 - try to deauthorize the Kobo, ctrl-shift-E (cmd-shift-E on mac) to ADE with kobo plugged in, then reautrhorize
2 - try factory reset of Kobo and reauthorize from ADE
3 - second hand ...
12 Nov
11:26 >>> BTW 74.11/15.65
+++++++++++++++
~~~~~~~~~~~~~~~~~~~~~~~~~~
possible help with Kobo issues … I haven’t tried this
from post 23 in http://forums.adobe.com/thread/1124380?tstart=0 by Shirltaylor, Jul 26, 2013
Yes it was extremely frustrating process to read any library books after the upgrade to Adobe Digital Editions 2.0.
Eventually it turned out that the process must have you sign out of the Kobo device Account under settings on the Kobo Device.
What we did was to remove all library books from the Kobo device and from the Adobe Digital Edition
Next was to sign out of the Kobo Device as well as the Kobo Desktop on the PC as well as exiting from Adobe Digital Edition.
Next was to start up Kobo Desktop and sign in.
Next was to connect the Kobo device to the USB port.
This resulted in the Kobo device being upgraded and Sync'd to the Kobo Desktop. Wait until the Sync is complete
Disconnect the Kobo device from the USB port
Next was to restart Adobe Digital Edition and using CTRL-SHIFT-D to deauthorize the computer and select Erase Authorization.
Next was to go back to Adobe Digital Edition, Help and Authorize Computer
Next was to reconnect the Kobo device to the USB port
Next was to select the Kobo device in the Adobe Digial Edition and Authorize the device
Next was to get a library book in the Adobe Digital Edition and then add it to the Kobo Device
Everything seems to be working from then on.
Have fun reading again

Similar Messages

Pending calls, problem with distinguishing which call that was disconnect

Hi everybody,
I have an application that gets triggered by incoming calls. When the calls are rejected a menu will show up. When users have pending calls however the menu should only be triggered when the newly arrived call is disconnected not if the ongoing call was disconnected and the user switched to the new call.
If two calls are active on the phone, is it possible to distinguish which call an event belongs to?
I have not been able to find any information about which tags that comes with EVENT_EVENT_DOWNLOAD_CALL_DISCONNECTED and EVENT_EVENT_DOWNLOAD_MT_CALL. I guess that there is no TAG_ADDRESS in EVENT_EVENT_DOWNLOAD_MT_CALL right? Maybe it is possible to check that both events occurs in the same channel (?) or something?
Thanks in advance,
Henrik

Hi,
Thanks a lot!
I guess that the Transaction Identifier might be solution to my problems. It is the only field present in both MT CALL and CALL DISCONNECTED.
Do you (or someone else) know more about how this field is used? To me it seems from the info in the document like it have one value per telephone call and this is what I am looking for. For MT call it says that it "shall contain one transaction identifier" coming from the network. For call disconnected it says that it "shall contain a list of the transaction identifiers for each of the calls being disconnected". In the document it also says for this field "Coding according to specific technology". Is it always one byte?
When running in the Gemalto simulator the transaction identifier is always 00. On a mobile it doesn't work however, the MT CALL transaction identifier is there 00 and the CALL DISCONNECTED transaction identifier is 80. These value does not change when I test with more calls unfortunately.
Best regards,
Henrik

Problem with printer on airport that was working 3 weeks ago.

Hello
I have an airport extreme and have connected to it an epson sp rx700. 3 weeks ago when I last used it, it was working fine. I have a macbook too which I print wirelessly through the extreme too. Yesterday I tried printing on my imac and it recognises it through airport settings but can't print. The print icon comes up and just says printing, but nothing happens. On my macbook its fine, prints normally. I've checked the driver and they are using the same drive which is version 8.37. All my mac OS updates are up to date on both computers. Does anyone know what could have happened in 3 weeks that could have caused one computer to print and the other not to? Would appreciate any help.

Have you tried deleting the printer from Print & Fax and then re-adding it?

HT2534 I have an iTunes account ; I am trying to purchase music with a Gift Card that was previously entered with a small balance I would like to use when clicking on the purchase link it directs me to my Credit Card info, why?

I am having trouble redeeming the balance of an iTunes Gift Card ... any suggestions? When trying to purchase music I am directed to the Card I had used one time ... HELP??? I have a balance on the card I am unable to spend!!!

How much is what you want to purchase and what is the gift-card balance?

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

HT1296 If I want to sync my iPhone to my new MacBookPro that was previously synced with a different computer, will it erase everything from my iPhone?

If I want to sync my iPhone to my new MacBookPro that was previously synced with a different computer, will it erase everything from my iPhone?

Yes, unless you first transfer a copy of your iTunes folder from the old computer to the new one.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
How to dowload purchased music

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

Problem with USB audio device

Hi all
I have many problem with a USB device sound, i have a plantronic headset with a usb adapter to connect on my macbook pro, I have already this problem in the past but i have found a astuce to fix this problem. Before, when i'm on teamspeak 2, 3 or other software to capture audio with my headset, after 10 minutes, the sound make noise and i have a robotic voice... Since mac OS 10.5.7 apple have change the USB audio driver. i have found on internet the previous driver and change it on mac os X but since the new mac os 10.6.5 the problem com back with the previous or the new driver audio. I don't know if other people have this problem but this is very annoying.
I have test my device on windows with boot camp many hour and nothing, no problem of distord sound or robotic voice.
PS : I'm french and my english can be bad, sorry for that.

Apparently, your previous search for audio issues in these forums missed this one: http://discussions.apple.com/message.jspa?messageID=12574650

I am unable to enable a device that was disabled through my account.

I am trying to re-enable a device that I previously disabled through the members center.
When I go the the list of devices I have added to my account I can see all of them. The device I am trying to enable again is greyed out indicating it is disabled. Clicking on this device opens a drop down menu showing the devices name, UDID and 2 buttons (Edit and Enable). When I try to click either of these buttons, there is no responce and nothing happens.
Next to the title 'iOS Devices' there are 3 buttons, 'Add', 'Edit' and 'Search'. Clicking this edit button removes the greyed out device from my list until I cancel this attempted edit.
I have also tried re-adding the device from the Organizer window in XCode. This only yeilds an error responce saying "This device '(UDID)' is already registered, but has been disabled. You can re-enable it from your list of registered devices in your account on the developer website." As I have already tried this I am all out of ideas.
Can someone tell me what I am doing wrong, or if there is some way to re-enable my device. I need the device for testing my app.

Supposedly you are on a good track trying to resolve this through the Member Center. I too have this problem presently, and the only reference I found addressing enabling the previously disabled devices is in Apple's App Distribution Guide under 'Adding Devices to Your Provisioning Profile' > 'Troubleshooting', where it says: "If your device was previously registered but is disabled, enable the device using Member Center...". Apologies if you have seen this already, but perhaps this is a good lead to explore the Member Center further. As I have been so far unsuccessful in the above Troubleshooting advice, I wish to join ScottH87 and ask someone, perhaps from Apple, to suggest the resolution. Thank you in anticipation.

[svn:fx-trunk] 8452: - Fix flicker problem with constraint bound text that is being autoSized.

Revision: 8452
Author:   [email protected]
Date:     2009-07-08 08:38:32 -0700 (Wed, 08 Jul 2009)
Log Message:
- Fix flicker problem with constraint bound text that is being autoSized. If the remeasure is done in a 2nd pass you will see a flicker as all the objects are moved to accommodate the reflowed text.
- Fix data binding issue with text setter.
- Rework measure() to accommodate implicit autoSize.
If explicitWidth or widthInChars specified and explicitHeight or heightInLines specified, or for now, blockProgression != "tb", the text has fixed dimensions and is not auto-sized.
If no text and width specified, but no height, start at specified width and one line high and grow taller.
If no text and height specified, start at 1 char wide with the specified height and grow wider.
If neither width nor height specified, and toFit lineBreaks, start at explicitMaxWidth, or default maxWidth of 160, and grow taller.
If neither width nor height specified, and explicit lineBreaks width is unlimited and can grow taller.
These are further constrained by min/max Width and Height except in the case that explicitWidth or explicitHeight are specified.
- Change default maxWidth for RichText and SimpleText to 160 to match RET. Previously it was 10000. This is used for
text with toFit lineBreaks if a width isn't specified.
QA Notes: 12 or so TextGraphic tests fail because of the new default maxWidth.
Doc Notes:SDK-22014, SDK-21837
Reviewers: Gordon
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22014
    http://bugs.adobe.com/jira/browse/SDK-21837
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextContainerManager.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/TextGraphicE lement.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextEditManager.as

You have used elements like header, footer, footer1 and nav without using the correct DOCTYPE declaration. Replace the first line of your code with
<!doctype html>
Also have a look here for other problems http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fhome.surewest.net%2Fstorytales%2F test%2Fforposting.html
After the above has been fixed, please come back here to fix the remaining problem(s)
Gramps

I purchased an iphone 4s few weeks back here in Pakistan and now I can't activate it because it says that this iphone was lost and erased. sign in with the Apple ID that was used to erase this iPhone. what do I do now???

I purchased an iPhone 4s few weeks ago here in Pakistan and now I can't activate it because it says the this iPhone was lost and erased. Sign is with the Apple ID that was used to erase this iPhone. What do I do now? because I contacted the Owner but he's not willing to give me that ID. I mean it's really very annoying why do people are selling stolen phones? Please help me guys.

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Problem with detecting USB devices.. something abt ehci-hcd??

Hi All,
I have a DELL E6410 laptop. I have a problem with connecting USB devices.
Whenever a power event (such as connecting/disconnecting of AC adaptor) happens, my laptop stops detecting any USB devices and any changes that happen on the USB ports. That is, say an external mouse is connected to the laptop, the mouse stops functioning, and if I connect a mouse/USB_stick or any such thing to the computer, the device is not detected.
dmesg output show that any connecting/disconnecting events are not detected by the computer. lsusb output too shows the same thing.
To solve the problem, I need to rmmod the module ehci-hcd and modprobe it back. That is, I have to run the commands rmmod ehci-hcd followed by modprobe ehci-hcd. Then, this problem goes away until the next power event happens.
This event does not happen all the time, but it happens very regularly.
Here are the kernel and laptop specs..
uname -a
Linux myhost 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64 Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz GenuineIntel GNU/Linux
Kindly help me on this issue.
Thanks

This is the output of kernel.log when I unplug my AC adaptor with the external USB mouse connected.
Sep 12 11:18:33 localh ost kernel: [ 591.015557] EXT4-fs (sda6): re-mounted. Opts: commit=600
Sep 12 11:18:37 localhost kernel: [ 595.478866] ehci_hcd 0000:00:1a.0: PCI INT A disabled
Sep 12 11:18:37 localhost kernel: [ 595.478919] ehci_hcd 0000:00:1a.0: PME# enabled
Sep 12 11:18:37 localhost kernel: [ 595.498827] ehci_hcd 0000:00:1d.0: PCI INT A disabled
Sep 12 11:18:37 localhost kernel: [ 595.498877] ehci_hcd 0000:00:1d.0: PME# enabled
After this the the mouse goes dead (the light on the mouse also goes off).
If I disconnect the mouse at this stage, there is no change in kernel.log. If I the mouse back too, there is no change in kernel.log.
Now, when I turn the AC adaptor on, this is the output on kernel.log
Sep 12 11:22:16 localhost kernel: [ 813.917712] EXT4-fs (sda6): re-mounted. Opts: commit=0
Sep 12 11:22:16 localhost kernel: [ 813.977405] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.977453] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.980838] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.980874] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 814.075104] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xd6970000-0xd69703ff] (PCI address [0xd6970000-0xd69703ff])
Sep 12 11:22:16 localhost kernel: [ 814.075148] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Sep 12 11:22:16 localhost kernel: [ 814.075189] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
Sep 12 11:22:16 localhost kernel: [ 814.075256] ehci_hcd 0000:00:1a.0: PME# disabled
Sep 12 11:22:16 localhost kernel: [ 814.075279] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 12 11:22:16 localhost kernel: [ 814.075295] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Sep 12 11:22:17 localhost kernel: [ 814.228224] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xd6950000-0xd69503ff] (PCI address [0xd6950000-0xd69503ff])
Sep 12 11:22:17 localhost kernel: [ 814.228246] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
Sep 12 11:22:17 localhost kernel: [ 814.228273] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
Sep 12 11:22:17 localhost kernel: [ 814.228310] ehci_hcd 0000:00:1d.0: PME# disabled
Sep 12 11:22:17 localhost kernel: [ 814.228324] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 12 11:22:17 localhost kernel: [ 814.228333] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Sep 12 11:22:17 localhost kernel: [ 814.614404] usb 2-1.1: reset low speed USB device number 3 using ehci_hcd
At this point, the mouse comes back to life (its light begins to glow) and I can move the mouse pointer on the screen.
The output of the grep command that rwd gave is too big (16000 lines) to be pasted here..
Thanks,

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Problem with authorising a device that was previously recognised.

Similar Messages

Maybe you are looking for