Problem with Authorize

Hi everyone, i keep getting this message when i'm trying to authorise my computer in iTunes :
The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
Where do i correct that permission? Any ideas?
TIA

I'm also having the same problem. They started after I replaced a hard disk.
i-tunes wants authorization and gets...tells me the computer is already authorized and refuses to recognize the phone. If I run the sync it cleans out all of the apps from the phone and wont send any to the phone.

Similar Messages

Problem with Authorization for Planning folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
Regards,
Abraham

Calling Thru Trans code: BPS0 in ECC 6
getting this error:
Error while calling up RFC
Message No. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"An error occurred during the receipt of a complex parameter."
after i check in bw trans code:st22
Following this error message:
Category                   Internal Kernel Error
Runtime Errors         PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC
Short text
    An error occurred during the receipt of a complex parameter.
What happened?
    During a remote function call, an error occurred while converting
    a complex parameter.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred during the conversion of a complex parameter.

Problem with Authorization for BW BPS planning Folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
if any one has faced the same issue let me know.
Regards,
Abraham

HI ,
I Checked it out we dont have that cube in our system.
Regards,
Abraham

Problem with authorize my computer

Hi I am having problems with the authorization of my computer every time I go to "shop" "authorize computer"and the itunes asks me apple ID and password and I type it and later itunes says that this computer is Allow 1 of 5
but when I go through my applications that I bought in itunes store the itunes says tah my computer is not authorized...
What can I do to pass applicatives to my iPhone?

I'm also having the same problem. They started after I replaced a hard disk.
i-tunes wants authorization and gets...tells me the computer is already authorized and refuses to recognize the phone. If I run the sync it cleans out all of the apps from the phone and wont send any to the phone.

Iphone 5. Problem with authorization by Wifi spot

Dear collegues!
Now i am in business trip and tired by the problem of connection to hotel's wireless networks that use internal authorization.
I mean the situation when network itself has no password, but i have to enter login credentials in authorization window that pops up after connecting to wireless spot.
In 80% cases this window doesn't appear, i try to on/off wi-fi, reset net settings of Iphone and after some attempts of such a workaround - sacred window appears and i can work till next time connecting. It happens without any dependance.
Other devices (Android) has no such a trouble.
What can i do? Is it possible to force this extra authorization window?
Thank you!

I've had this same problem with both my 4S and now my 5. I've been an iPhone owner since day 3 of the original, and I never had this problem until iOS 6. I'm now running the betas of iOS 6.1 and it still hasn't been resolved.
One of the very first things that I tried was resetting the network settings as advised above. Doesn't resolve the issue.

Problem with authorization M_MATE_MAT

hi guys,
i have created authorization role with authorization object M_MATE_MAT
and i put the value of begru = COMM, but when i display the PR, the search help still displays all material group even the authorization group is not COMM , is there anything that i missed out, pls help

Hello
No, you did not miss anything out.
But authorizations usually do not restrict the values displayed in search helps.
Regards
Uwe

Unexpected problem with authorization scheme of type plsql function

Hi,
I have created one authorization scheme of type plsql function returning boolean. Authorization scheme is for pages only. p2_user_priviledge is a textbox on home page which extract privilege (list of pagenos) for login user from database. Home page has no authorization required. AUTHORIZATION SCHEME always returns false. I am not able to trace problem in my code. same code works fine for a textbox's default returning 'c'.
----- CODE FOR AUTHORIZATION SCHEME------------------------------------------------------------
declare
pageid varchar2(10);
privilege varchar2(300);
c number(3);
begin
pageid := ':P'||to_char(:app_page_id)||':' ; ---Pageno get stored in format *:P2:*
privilege := trim(:p2_user_priviledge); ++------Contain list of privilege like :P2:P13:P67:P23: etc+++ select instr(privilege,pageid) into c from dual;
if c>0 then
return true;
else
return false;
end if;
end;
One more problem is again related to authorization scheme.
I created one application and one authorization scheme (auth_aug) which worked finely. Then after some days i added 10 more pages to same application, But now autho_aug was always returning false for new pages. So i copied code from 'autho_aug' to new scheme 'autho_sept', & it worked for new pages. I don't understand if code is same for both scheme, why required to use two different schemes.
Now i have added few more pages to application, and facing problem mentioned earlier.
any solution for both the problems.....

Hi,
Let me clear my problem once again.
-->Home page i.e. P2 does not use authorization, So it is displayed along with text item :p2_user_privilege.
-->Then user click on one of the links , Now page :P70: should get displayed.
P70 is using authorization scheme.
-->But :p2_user_priviledge value is not accessible at authorization scheme, I dont know why.
I could not find out where to create Application item , as suggested by you.
& not able to find Developer menu , session at home page as suggested earlier.
And one more question, my application at runtime display
X en us
at bottom
How to make it
USER: X Language: en us
Like in development environment.
Hope I have cleared my problem, waiting for reply.
Edited by: TEJU on Nov 17, 2008 9:25 AM

Problems with authorization in iTunes 7

I updated to iTunes 7 and the first time I connected my iPod there were 90 songs which I have legally downloaded from iTunes which it says I do not have authorization to copy from my computer onto the iPod. Very irritating! All my other downlaods are fine. Any ideas please?

I had the same problem, but was able to solve it. See my notes here:
http://discussions.apple.com/message.jspa?messageID=3495571#3495571
You need to replace a copy of a file that iTunes creates - it's a 30-second fix (and works perfectly) - with the caveat that you must have a good backup.

PPPoE problem with Authorization of the ip-address (Framed-IP)

Hi!
This week I changed our PPPoE dial-in router from a Cisco 3660 (SW: 12.4.25) to a Cisco 2901 (SW 151-2.T2-Universal Image).
Now I have the problem that I could not make a dial-in connection to this router. I get an error in the PPP-Authorization.
I want to get the IP-Address per radiusattribut "Framed-IP-Address". With the version 12.4. it works fine.
DEBUG:
Nov 10 09:35:23.277: ppp29 PPP: Using AAA Unique Id = 104
Nov 10 09:35:23.277: ppp29 PPP: Authorization required
Nov 10 09:35:25.289: ppp29 PPP: Sent PAP LOGIN Request
Nov 10 09:35:25.301: ppp29 PPP: Received LOGIN Response PASS
Nov 10 09:35:25.301: ppp29 PPP AUTHOR: Author Data NOT Available
Nov 10 09:35:25.301: ppp29 PPP: Sent LCP AUTHOR Request
Nov 10 09:35:25.301: ppp29 PPP: Sent IPCP AUTHOR Request
Nov 10 09:35:25.301: ppp29 LCP: Received AAA AUTHOR Response PASS
Nov 10 09:35:25.301: ppp29 PPP: Receive Attrs from[author] Keep[LCP] MERGE
Nov 10 09:35:25.301: ppp29 PPP: Keep Attr: service-type         2 [Framed]
Nov 10 09:35:25.301: ppp29 PPP: Updated the attr service-type in datalist
Nov 10 09:35:25.301: ppp29 PPP: Skip Attr: addr-pool            "pool-edsl"
Nov 10 09:35:25.301: ppp29 PPP: Skip Attr: addr                 213.174.251.199
Nov 10 09:35:25.305: ppp29 IPCP: Received AAA AUTHOR Response PASS
Nov 10 09:35:25.305: ppp29 PPP: Receive Attrs from[SSS] Keep[NCPs] MERGE
Nov 10 09:35:25.305: ppp29 PPP: Skip Attr: service-type         2 [Framed]
Nov 10 09:35:25.305: ppp29 PPP: Keep Attr: addr-pool            "pool-edsl"
Nov 10 09:35:25.305: ppp29 PPP: Updated the attr addr-pool in datalist
Nov 10 09:35:25.305: ppp29 PPP: Keep Attr: addr                 213.174.251.199
Nov 10 09:35:25.305: ppp29 PPP: Updated the attr addr in datalist
Nov 10 09:35:25.313: %LINK-3-UPDOWN: Interface Virtual-Access3, changed state to up
Nov 10 09:35:25.313: Vi3 LCP AUTHOR: Process LCP Author Data
Nov 10 09:35:25.313: Vi3 LCP AUTHOR: Process Attr: service-type
Nov 10 09:35:25.313: Vi3 LCP AUTHOR: Authorization succeeded
Nov 10 09:35:25.313: Vi3 PPP: Store Author Attr: addr-pool
Nov 10 09:35:25.313: Vi3 PPP: Store Author Attr: addr
Nov 10 09:35:25.317: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access3, changed state to up
Nov 10 09:35:25.317: Vi3 IPCP AUTHOR: Start. Her address 0.0.0.0, we want 0.0.0.0
Nov 10 09:35:25.317: % IPCP AUTHOR Vi3: Attributes addr and addr-pool are mutually exclusive
   ---->> I think this is my problem - have anyone an idea?
Nov 10 09:35:25.317: Vi3 IPCP AUTHOR: Authorization denied
Nov 10 09:35:25.317: Vi3 IPCP AUTHOR: Done. Her address 0.0.0.0, we want 213.174.251.199
Nov 10 09:35:25.357: Vi3 PPP: Sending Acct Event[Down] id[104]
Nov 10 09:35:25.365: Vi3 PPP: Clearing AAA Unique Id = 104
Thanks,
Hannes

Hi Shelley!
Thanks for your answer. We have solved the problem.
It was a wrong configuration in the templete.
The attribut "Framed-IP-Address" was configured in the templete and in the default-attributes of the radius-server.
Thanks for help!
Hannes

Tutorial: Issue Tracker, Problem with Authorization

Hi All,
I just worked through the Issue Trackin System Tutorial, everything looks great except the Authorization. I did the Tutorial on our local Instance of HTMLDB so I had to modify the Authorization Schemes a little. People should login using their internal HTMLDB-Account, which uses an extra loginname, not the email adress. So i added a column PERSON_LOGIN to the ht_people table which holds the userID. My Authorizationscheme looks like this:
select '1' from ht_people where
(upper(PERSON_LOGIN) = upper(:APP_USER) and
PERSON_ROLE in ('Lead','Member') and
ASSIGNED_PROJECT = :P7_RELATED_PROJECT)
or (:APP_USER = 'HOWTO')
or (:P7_ISSUE_ID is null)
This Scheme simply does not work, the user does not get the authorization to edit the issues assigned to him. I canÂ´t see the problem, if I do this query I get the expected column back. If I log in to the Application and try to edit the issues, I donÂ´t get the neccesary authorization. Any Ides ?

From Scott -
I installed that demo app on our hosted site. I don't see anything structurally wrong with page 0 breadcrumbs. When you edit page 0, do you see the correct menu region, or is there a big number where its name should be? If you find something that you cannot repair, please let us know.
As for the authorization schemes, I see what's going on. The scheme controls the display of buttons and a region on page 7 and is evaluated during the rendering of the region and the buttons. These events take place before the item P7_RELATED_PROJECT is rendered, thus before its session state is established or altered during that page view. However the implementation of the authorization scheme references the current session state of that item. That won't work. Using standard conditions (vs. authorization schemes) to control the buttons/regions that are earlier on the page than the referenced item would have the same problem if they used the same logic. For situations like this, LOVs that submit the page and result in a branch back to the same page can be very useful, or splitting the page into multiple pages, as in wizard implementations, can also work.
From Sharon -
I want to thank you for pointing out this bug. This is our first tutorial document and a lot of time was spent making sure that users could follow the directions and learn how to create all the objects that make up an application. Obviously, not enough time was spent testing the resultant application. The statement below should work for the Authorization Scheme in question.
select '1'
from ht_people
where (person_email = :APP_USER and
person_role in ('Lead','Member') and
assigned_project = (select related_project
from ht_issues
where issue_id = :P7_ISSUE_ID))
or (:APP_USER = 'HOWTO')
or (:P7_ISSUE_ID is null)
You will notice that is allows the modification of the issue by either the Lead or any Member of the project, not just the one assigned. When I update the document and repost on OTN, I will make a note of that.
This checks that the current value of related project is the project that the Member or Lead is assigned to. It is true that while viewing the page, the user can change the related project. Once the change is applied, they would no longer be able to edit that issue.

Problem with Authorization & URLRequest

Hi Everyone
I've noticed this bug while trying to make an
mp3 player that streams content from a protected
directory.
The following code was used in order to open the
mp3 streams / files :
quote:
var oRequest : URLRequest = new
URLRequest("<path_to_a_protected_directory_file_>");
oRequest.method = URLRequestMethod.POST;
oRequest.requestHeaders.push( new URLRequestHeader(
"Authorization" , "basic " +
"<user:pass_in_base64_encoding>") );
m_SoundObj = new Sound();
m_SoundObj.addEventListener( "ioError" , SoundObj_OnIOError
m_SoundObj.load(oRequest);
The above always produces a browser authentication dialog.
I tried to isolate the problem using a URLLoader but no such
luck.
The url loader failed also... A folk on a weblog said that
only POST
requests accept headers... added the post method, still
nothing...
I've ported the request mechanism using XMLHTTP in order
to check out if there was anything wrong with my settings and
it worked ok (using utf8 / iso-8859-7 charsets)... Flex still
refuses
to use the authentication info...
Seems like the Sound Object only sees the url from
the entire URLRequest object in order to open the file.
Any ideas?

And the following shows the problem fixed. You MUST set some
data on the request like so:
request.data = "fooooooo";
I'm going to guess request.data = " "; will suffice and not
break too much on the other end
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Script>
<![CDATA[
private function go():void {
var request:URLRequest = new
URLRequest(pollutedNamespaceDotCom.text); // the +".xml" makes me
mad
request.method = URLRequestMethod.POST;
request.data = "fooooooo";
request.requestHeaders = new Array(new
URLRequestHeader(headerName.text,headerValue.text));
var loader:URLLoader = new URLLoader(request);
]]>
</mx:Script>
<mx:Button x="287" y="142" label="Submit"
click="go()"/>
<mx:TextInput x="10" y="36" id="headerName"
text="Foo"/>
<mx:TextInput x="192" y="36" id="headerValue"
text="Bar"/>
<mx:Label x="10" y="10" text="Header Name"/>
<mx:Label x="192" y="10" text="Header Value"/>
<mx:Label x="10" y="66" text="URL"/>
<mx:TextInput id="pollutedNamespaceDotCom" x="10" y="92"
width="342" text="
http://dev2.ivistra.com/~rasheed/"/>
</mx:Application>

I can't sync my macbook air with my ipad, problems with authorization... this keeps cropping up: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permi"

Help, cannot sync completely with my ipad, and i also cannot remove or delete shared photos which are clogging up my ipad 64GB memory! Some issue with this keeps croppin gup, so frustrating:
"The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."
Not sure how we can correct his permissions problem, and whether authorising or deautorizing makes any difference, with more and more errors keep popping up, this got to be such after an update of the OS, can remember which!?
HELP!!!

follow this:
Launch iTunes
select iTunes Store from the menu on the left side.
sign in via the link on the top right area if you haven't done so already
click the link where you Apple ID email appears, enter your Apple ID password, click View Account, this will take you to a page displaying detailed information about your Apple ID account.
The last item under Apple ID summary should be Computer Authorisations, click Deauthorize All
now reauthorize any computers as needed when the system prompts you.
good luck.

Problems with Authorization Policy, the USER has expired and the ISE is allowing access.

Hi,
My end customer reported an issue with ISE 1.1.4-218.
The GUEST user is expired but still can authenticate in the WLAN.
That's an known issue/bug?
Thanks!
Regards,
Rafael Eloi

Check if the option in the configuration part of the Authentication process = CONTINUE.
For example, when you use CWA, the IF AUTHENTICATION FAILED Option = CONTINUE so the MAB Auth always fails but based on that Option your connection continues so you are actually redirected using the AUTHORIZATION Policy.

Weird music download problem with authorization

ok, I don't know *** is going on. the music store and itunes used to be all fine and dandy. now suddenly they hate me, and REFUSE to play music that I got off the music store. apparently I have become the devil in the eyes of itunes. it asks me to authorize, and I do. then it's all like 'lawl ok', and then is suddenly like 'uhh no we can't do this, and we aren't even going to tell you why' (unknown error -208). I've updated itunes which is similar to a reinstall, and the problem still isn't fixed. I had just bought a new album too. this is really ******* me off. what is going on?
thanks
~Thomas

Your hidden SC file has been corrupted.
Goto "My Computer" hit tools>Folder Options>View tab and check "Show Hidden Files and folders" then UNCHECK "Hide Protected Operating System Files".
Now goto C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\ and delete the "SC" folder.
Open iTUnes and goto advanced>Deauthorize computer and deauthorize (Make sure your connected to the internet when doing this). now pick a random purchased song and authorize, you should now be set
PS you may want to open "My Computer" and put a check beside "Hide Protected operating system files" now so you don't delete a main file of windows by mistake

Problem with authorization to webreporting

i have some users that as the roles to report X, but when they try to get do that report X, they get a message saying that they dont have authorization, and im not getting any solution to this problem....its really strange.
did any one get some problem like this? solution?
regards to every one

...

Problem with Authorize

Similar Messages

Maybe you are looking for