Problem with automatic 2 sided copying

I'm not able to copy documents 2 sided automatically. All settings are true but it copies just one side. In order to copy 2 sided, I have to do it manually.

Hi,
Do you try copying a two sided original?
The printer only support two sided printing, it does not support 2 sided copying of an original (aka. ADF Duplexing)
Please clarify what happens of I may misunderstood your intention.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Problem with Automatic Replies or Out of Office

    Hi mates!
    I´ve just finished migration Exchange 2003 to Exchange 2010. 
    Today I´ve removed Exchange 2003.
    I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
    Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
    If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
    I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
    https://mail.domain.com/ews/exchange.asmx
    I try to browse the OOF URL from IE, It works fine.
    Authentication Permission for EWS Virtual Directory is:
    Anonymous – Enabled (For IUSER)
    Basic – Enabled
    Windows – Enabled
    Other authentication methods are disabled.
    WebServicesVirtualDirectory configuration for URL:
    InternalNLBBypassUrl :
    https://Server1.domain.local/ews/exchange.asmx
    InternalUrl         
    : https://mail.domain.local/EWS/Exchange.asmx
    ExternalUrl       
      : https://mail.domain.com/EWS/Exchange.asmx
    InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
    InternalUrl         
    : https:// mail.domain.local /EWS/Exchange.asmx
    ExternalUrl         
    : https:// mail.domain.com /EWS/Exchange.asmx
    I use a certificate for Server HUB/CAS from my CA (Active Directory).
    In EMC I have this error for certificate:
    The certificate status could not be determinated because the revocation check failed.
    But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
    I need help, because I don´t know I do…
    Thanks.

    Hi MAS,
    As soon as possible I will install this kb in a PC with Outlook 2010.
    Yes, I reset IIS, with the same result.
    I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1019
    Type       : Information
    Message    : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1006
    Type       : Information
    Message    : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1016
    Type       : Information
    Message    : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1015
    Type       : Information
    Message    : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1014
    Type       : Information
    Message    : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1016
    Type       : Information
    Message    : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1015
    Type       : Information
    Message    : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1014
    Type       : Information
    Message    : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1022
    Type       : Success
    Message    : Autodiscover was tested successfully.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1106
    Type       : Information
    Message    : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1116
    Type       : Information
    Message    : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1115
    Type       : Information
    Message    : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1114
    Type       : Information
    Message    : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1116
    Type       : Information
    Message    : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1115
    Type       : Information
    Message    : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1114
    Type       : Information
    Message    : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1122
    Type       : Success
    Message    : Autodiscover was tested successfully.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1013
    Type       : Error
    Message    : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1025
    Type       : Error
    Message    : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1026
    Type       : Success
    Message    : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1013
    Type       : Error
    Message    : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1025
    Type       : Error
    Message    : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1026
    Type       : Success
    Message    : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1124
    Type       : Success
    Message    : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1126
    Type       : Success
    Message    : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
    All ok, but with these errors:
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1013
    Type       : Error
    Message    : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1025
    Type       : Error
    Message    : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1013
    Type       : Error
    Message    : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
    RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
    Id         : 1025
    Type       : Error
    Message    : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
    In IIS for EWS has this method Authentication:
    - Anonymous
    - Basic
    - Windows
    For SSL Settings in EWS has this configuration:
    - Require SSL
    - Client Certificate: Ignore
    For Default Website in IIS, SSL Settings:
    - Require SSL
    - Client Certificate: Ignore
    I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

  • Problems with Automatic Workflow Customizing

    Hi!
    I am having problems with Automatic Workflow Customizing (SWU3). I am trying to execute "Configure RFC Destination" manually. I receive the message "Synchronization of passwords failed".
    We are using CUA and it is therefor not possible to create the user from SWU3 which means that WF-BATCH has been created in CUA with a pw which is then filled in by me when executing "Configure RFC Destination".
    WF-BATCH has authorization SAP_NEW, SAP_ALL
    My user also has SAP_NEW and SAP_ALL and usergroup SUPER.
    Does anyone know what might be the problem?
    Sincerley
    Anders Öhrling

    Hello Anders,
    Check if the user is locked in SU01. Then check if your user has been created in CUA.
    It is recommended to delete WF_BATCH. The system will auto create the user ID WF-BATCH and synchronize the password.
    Do let me know if your problem is resolved.
    Thank you.
    Regards,
    Manomeet
    - Award points if helpful -

  • Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code

    unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code.  i don't believe mac allows for input on job code or printer code for permission to print

    I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
    One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
    Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

  • Problems with sending carbon copy and blind copy with gmail

    I recently started using Safari and would like to continue as it is fast. But have problems with it when I use Gmail that I don't have in Firefox or Internet Explorer. For example when I want to forward and email to several people using the blind copy or carbon copy feature - each time I click a name i have to move the cursor back into the box manually because each time you add a name the cursor jumps to the subject line automatically. I forward a lot of email, How can I make using these features work with Safari? Any help is appreciated. Thanks.

    I would delete the account on the iPod an recreate the account. It is easy to make an error or enter the setting and hard to find the error.

  • Can't start laptop - problems with automatic repair, need acces to admin account but there is none. HELP! :(

    Hello,
    I'm having problems with my windows 8 laptop.
    This afternoon I shut it down, and went to work. A few hours later when I came back home I noticed the little blue lights on the keyboard (showing me that the pc was charging and that my wifi is on) were still on. Normally these are off when the pc is turned
    off.
    I tried starting the laptop but nothing happened, the screen stayed black. I held down the 'on' button to force it to turn off, and turned it on again.
    I then got a textmessage on the startup loading screen that there were problems with my C drive (only drive the laptop has), so it went to automatic repair.
    *my laptop's language is set to Dutch so I'm translating everything :)*
    It gave me 2 options:
    1: Restart computer
    2: Advanced options.
    I tried option 1, didnt work ofcourse, it just restarted and I got back to this screen, so I checked what option 2 had to offer.
    I got to a screen with 3 options: 
    1: Continue to windows 8
    2: Solve Problems 
    3: Shut down
    When I tried option 1 the computer just restarted and went back to the same screen.
    When I tried option 3 it shut down as it should.
    Option 2 gave me 3 other options:
    1: Renew PC
    2: Factory reset
    3: advanced options
    Option 1 just restarted my pc and took me back to screen 1.
    Option 2 I havent tried yet, because it erases all of my files. This is a last resort.
    Option 3 gave me 6 other options:
    1: Systemrepair
    2: Repair with installationcopy
    3: Startuprepair
    4: CMD
    5: UEFI firmware settings
    6. Startupsettings.
    I can't use option 1,2,3,4 because I need to log in to an administratoraccount.
    The bad part is: the laptop doesn't have an administratoraccount.
    It was my parents laptop, and theyve set it up. I always assumed the account was an admin because
    I had acces to everything and didn't need a password to run things as admin and such.
    Turns out it isn't.
    I get this message (translated) when I try to acces one of these:
    'You have to log in as administrator to continue, but this pc doesn't have an administratoraccount'.
    I can't believe microsoft added a check to see if the pc has an admin account on it, and even added a specific message to show when it doesn't, but they didnt add the option to just use these tools when there is no admin account present? What were they thinking!
    Option 5 I havent tried yet, when I click it it says I have to restart to acces these settings, but I dont want to mess with something I know nothing about.
    Option 6 gives me a few options like run the pc in safety mode, run windows repair and disable auto-restart after something has gone wrong with windows. But when I select one of these options it doesnt work. It just takes me back to auto repair. It just doesn't
    doe anything.
    There are no other options. Nothing I can do. My pc is stuck like this. The only thing I *might* be able to do is a factory reset, but I havent tried, and that could also just give me an error about me not being admin.
    Some backstory of what I think caused this problem:
    I believe the problems started a week ago, last friday.
    I'm using a program called 'AVG TuneUp'. This program gave me a message telling me it was 3 months since it had checked my C drive for defects or anything. And it asked me if I wanted it to do so. Unknowing of the problems that would follow, I pressed 'ok'
    (or whatever it was). 
    I had to restart my pc for it to begin, because it could only check the drive during startup. It went to 12% and stayed there for like half an hour, after which I decided to google (on my phone) if that was normal. It turned out that that option doesn't work
    well with windows 8 and that lots of people's computers got ruined after using it. I stressed and I tried to shut it down, but since I was still in startup the only thing I could do was force the pc to shut down, so I held down the power button and it shut
    down. I restarted and managed to abort the proces. The laptop started fine and everything worked.
    A few days later a game/program I use called League of Legends started to act weird, because I could not log in on my account (for the game) anymore. Some error with IE settings, which I was unable to fix. For more info about that go to http://boards.eune.leagueoflegends.com/en/c/help-support-en/8Eoz315J-cant-log-in-to-lol-and-cant-log-in-to-steam-either-weird-coincidence.
    Although I doubt it will help. 
    That forum post also contains a link to a post I made on the Steam forum about not being able to log into steam anymore. (Steam is another program I used). I wasn't able to log into steam anymore about 1-2 days after I wasn't able to log into LoL.
    Also at the same time my Norton sortof stopped working. It showed up as active in my task manager and AVG TuneUp program manager, but it wasn't in my task bar and I couldnt acces the control panel.
    Then yesterday I checked my pc for errors with AVG TuneUp's 1-click maintenance tool, and it told me my C drive was fragmented badly, so I defragmented it using the tool. Laptop still worked fine after that.
    And then today I got the error on startup about my C drive having errors.
    Long story shot: Problem is probably caused because I stopped the repair of my C drive with the avg tuneup tool before it was done, however its weird that I'm only experiencing (big) problems a week after that happened.
    Hardware info: 
    It's a Samsung Ativ book 6  (google it for all the specs :) )
    RAM: 8 GB DDR3 
    CPU: intel 3230M @ 2.60 gHz 
    GPU: AMD Radeon HD 8850M
    HDD: 1 TB S-ATAII hard disc 
    I've found this page:
    http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-taking-me-to-automatic-repair-but-no/6cbc995e-9ecb-4e28-8d6c-adabdecb8374?rtAction=1424369231072
    But I don't really understand what the answering person is saying, and my laptop doesn't have a CD drive..
    I really, REALLY hope someone can help me with this, because my laptop is basically 100% 'destroyed'.
    Kind regards,
    Christian Collaert

    Hello,
    Perhaps the operating system is incorrectly powering down or shifting the wireless adapter to a low power state in order to improve run time while on battery?
    Try going into the Device Manager (filename: DEVMGMT.MSC), locate the wireless adapter under the Network Adapters tree, view its Properties, and on the Power Management tab, disable (un-check) the Allow the computer to turn off this device to save power option.
    Please let us know if that makes any difference (or not).
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Problem with UTL FILE COPY

    Hi,
    I am facing one small problem in UTL FILE COPY package. We have an automated scheduled batch process. As a daily batch process it moves the files from one folder to other. During movement, it first copies the file from source folder to destination folder using FILE COPY package and then removes the file using FILE REMOVE package from the source folder.
    Few cases are found that the file when files are copied they are copied as 0 bytes in destination folder but the source file had 1 MB file size. The interesting part is I am unable to replicate the issue. Means when i try to run once again the package its working properly and files are copied with correct size. This kind is issue is occuring very rarely though as once in month but the question is why FILE_COPY package is not working properly sometimes.. I am unable to understand.
    Thanks a lot for going through this. Any suggestions.
    Regards,
    Ashish

    Anyhow make sure that the copy will start after the full generation of files.
    You can think like a spool file generation with huge data. In that case initially spool file available with 0 byte only. After finish of query only it shows its actual size.

  • Problem with a digital copy what should i do?

    received the message "an unknown error occurred (-50)" when down loading a digital copy and it won't finish the download I keep getting the same message. My code was good the download started but at 70mb It stopped and I got the message. I've down loaded dozens of digital copies but i've never seen this message before. How do I get it start and finish the download?

    Maybe there is a problem with OOPP
    See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.0 r42
    # Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Problem with CCC (Carbon Copy Cloner).... Am I screwed?

    Hello there, I've been using the Apple Discussion Boards since I bought my Quicksilver G4 to do any and all upgrades. I have not had a single problem with any advice careully taken from these boards until now.
    And it's a doosey.
    I just made the queen mother of all computer no-no's. Following the footsteps of others on these boards, I downloaded CCC to make a copy of my os onto a new (Internal) drive. I had been getting "Your start-up disk is almost full" messages and decided to replace my drive. Well, the computer froze during the copy and now my boot disk is shown as "not mounted" (In disk utility) and renamed "disk0s9". And yep, you guessed it, I didn't back up my files.
    The disk I was copying from was a partition, would that have anything to do with the failure? The disk was the 40GB factory drive split into 4 parts... don't ask why, It seemed like a good idea at the time. To put the icing on the cake, much of the data on the other partitions has vanished as well.
    I'm (mostly) prepared to suck this up a loss and hard-learned lesson. Is there any hope of retrieving the data?
    What can you guys tell me?
    '02 Quicksilver G4   Mac OS X (10.3.9)  

    As I mentioned, it is a partition of the old drive that has been "damaged", not the entire drive itself. And I had installed OSX onto one of the undamaged partitions (that's what I'm using now), but what I need is to get my user settings and data. So, Yes the old drive does work, but the partition that had my OS on it is "Not Mounted". Is there something I can do to make it readable without formatting/erasing it?
    In disk utility the partition is named "disk0s9" in shadowed type. When you click on it, at the bottom the only specs are 1) the Mount Point which reads "Not mounted" and 2) Capacity, which reads "9.6GB" [and the bytes].
    I had already gone through and deleted everything I didn't need in order to make space until I could buy a new drive (actually twice). I even moved many groups of files onto different partitions.
    I cannot afford to purchase any software or pay a Mac consultant to Run DiskWarrior or Data Rescue on my drive. That would be nice.
    I just tried to verify the disk in Disk utility and got this message:
    Verifying volume “disk0s9”
    Checking HFS Plus volume.
    Invalid B-tree node size
    The volume needs to be repaired.
    Volume check failed.
    Error: The underlying task reported failure on exit (-9972)
    1 volume checked
    0 HFS volumes verified
    1 volume failed verification
    That's jibberish to me....
    '02 Quicksilver G4   Mac OS X (10.3.9)  

  • Problems with automatically managing

    So, I've been having a few problems with my new 30G 5g ipod, and I've gone through the usual to try and fix them. I've reinstalled all the software, restored my ipod, tried other USB ports, and have even gone as far as reformating my computer. Most of the problems I've been able to overcome. However, the problem I have now is that after I restore my ipod and I try to automatically update all my music, it won't. Itunes shows that songs are being uploaded, but after so many songs are uploaded (usually around 100 but has happend with less) it seems like the ipod looses its connection with my computer. After the connection is lost it reconnects, itunes sees it as hooked up again, and tries to start uploading again in this perpetual cycle.
    So, that is my problem, but as it seems there are always make shift ways to fix things, and I've found one. I have accomplished getting all my songs onto my ipod (about 1000) by using the manually update songs, and transferring only a couple songs at a time.
    So, I have a couple of questions:
    First of all, is anybody having this problem with updating songs to their ipod?
    Secondly, if you are, have you found any sort of fix?
    Lastly, if nobody is having the same problem, my concern is now that I've got my ipod sort of working (via my make shift manual update) will I run into future problems (especially after waranty is up) and does this problem warant getting a new ipod from apple? Because let's be honest, it isn't working correctly.

    Does your computer meet the minimum requirements? If your using Win XP, not having service pack 1 and 2 can cause problems. Win 2k needs to have SP4. Any programs running in the back ground that might interfere with it? Not all USB ports are high powered, might try charging your iPod for 4 hours before transfering. Try disconnecting other USB devices, especially if they are some other form of storage device. Here's an article about the ipod discharging while transferring. Let us know what you find out.
    http://docs.info.apple.com/article.html?artnum=93888

  • Problem with automatic creation of Universes on top of SAP BW - RKF

    Hello
    When I create Universes on top of SAP BW Querys everythings works fine, except for the Restricted Key Figures. The RKFs are created with the GUID code and not with the Description configured in the Query. I tried making the Key Figure Local and Global in the query without success. Does anyone know what's happening?
    I'm using BO XI 3.1 SP2 with SAP BW 7.0.
    André

    I created universes based on a BW Query in the following situations:
        User specified username and password:   language = PT - Dimension's name OK, RKF are GUID
        User specified username and password:   language = EN - Dimension's name OK, RFK are GUID
        SSO: langue = PT or EN - Dimensions name are Ok and in English - RFK are GUID
    I edited prefences of CMC to Portuguese. The same results.
    The problem with the RKF still exists.
    Is there some way resolve this problem?

  • Sap4rails - Problem with automatic handling of data types under Windows

    Hello all,
    I've been trying to develop my own application using sap4rails library but whenever I call one of standard RFCs I always get strange results. Here is the piece of the code from my model which gets data from CURRENCY_LIST table:
    require "sap4rails"
    class App < SAP4Rails
      @@funcs = [
           'BAPI_CURRENCY_GETLIST',
      # User defined instance methods here
      attr_accessor :message
      class << self
      def getlist()
        RAILS_DEFAULT_LOGGER.info("[App]#getlist ")
        App.BAPI_CURRENCY_GETLIST.call()
        return App.BAPI_CURRENCY_GETLIST.currency_list.rows()
      end 
    end
    here is the code from the controller
    class AppController < ApplicationController
      layout "standard-layout"
    def index
      list
      render_action 'list'
    end
    def list
        RAILS_DEFAULT_LOGGER.info("[LIST] action started...")
        @currencies = App.getlist()
    end
    end
    end the code from the view:
    <html>
      <head>
        <title> Currencies </title>
      </head>
      <body>
        <h1>Listing Currencies</h1>
         <table border="1">
           <tr>
             <% @currencies.first.each_key {|key| %>
             <th><%= key %></th>
             <% } %>
           </tr>
           <% for currency in @currencies %>
           <tr>   
             <% currency.each_value {|val| %>
             <td><%= val %></td>
             <% } %>
           </tr>
           <% end %>
         </table>
      </body>
    </html>
    As you can see everything is just simple. I run my application on the Windows XP OS and always get such result:
    <html>
    <head>
       <title>Currencies and Exchange Rates: index</title>
    </head>
    <body>
       <html>
      <head>
        <title> Currencies </title>
      </head>
      <body>
        <h1>Listing Currencies</h1>
         <table border="1">
           <tr>
             <th>VALID_TO</th>
             <th>ALT_CURR</th>
             <th>LONG_TEXT</th>
             <th>CURRENCY_ISO</th>
             <th>CURRENCY</th>
           </tr>
           <tr>   
             <td>oran peseta     </td>
             <td>231And</td>
             <td>                                                                                </td>
             <td>099991</td>
             <td>ADP  ADP02</td>
           </tr>
           <tr>   
             <td>babwean Dollar  </td>
             <td>231Zim</td>
             <td>                                                                                </td>
             <td>699991</td>
             <td>ZWD  ZWD71</td>
           </tr>
    </table>
    </body>
    </html>
    It seems like there is sth wrong with mapping data types from R/3 to data types in Ruby. Does anyone has an idea what could be wrong? I would be very grateful for any help.
    Best Regards
    Michal M.

    First can you please post all log file errors
    >> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
    1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
    If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
    2. You can try reinstall from start (In this case you have to make sure that you un-install all)
    [Personal Site] [Blog] [Facebook]

  • MSI P55-GD65 - Problem with automatic fan control.

    Hello.
    I wish to share story of my fan speed controller.
    Lately I've upgraded my machine to modern specs (look at signature) and I was quite happy about that.
    It worked flawlessly for about week.
    My H/W Bios settings was - CPU Smart Fan Target = 60°C and minimal fan speed 50%.
    I was amazed how nicely GD65 maintained between heat and speed.
    Yesterday, I've noticed that my fan is really quiet all the time, even when gaming (before it accelerate speed while hardcore gaming settings). I was quite content about that, until my computer crashed due to overheating while playing Battleforge match.
    After reboot I've ran Intel BurnTest and HWmonitor. OH my, what was my surprise when I saw that fan speed is always 50% and do not speeds up when cores are heating up!
    I started to checking things out. What I've discovered:
    -(CPU Smart Fan ON) Fan is always at minimal speed given in BIOS. It doesn't accelerate even if CPU is burning.
    -(CPU Smart Fan ON) Fan speed cannot be controlled by any program (like SpeedFan).
    -(CPU Smart Fan OFF = 100% fan speed) Fan speed CAN be controlled by program like SpeedFan, which saves me from fan buzzing.
    I've try to fix that by:
    -Checking cables.
    -Clearing CMOS.
    -Updating BIOS to 1.6.
    -Praying.
    And still nothing.
    My conclusion:
    Fan speed cannot be change when Smart Fan is on, it locks fan speed at minimal speed given in bios.
    Now I just hoping that this is somehow stock fan fault, new Zalman CNPS 10X QUIET is in delivery.

    No problem here with Target 55° and Speed 37.5%.
    Fan runs at 1330 below 58° and 2050 above which is max.
    The CPU is running at 3050 MHz because of XMP 'overclocking'
    Have reverted to BIOS version 1.3, due to XMP problems with other versions.

  • E61: problems with automatically receiving emails

    Hi.. I have had my E61 for quite a while already but am having problems with its internet connectivity. Basically everytime I attempt to connect to the mobile internet it very rarely connects on the first attemp, but normally I have to try 2-3 times for it to connect (even with full 3G reception. This means that when I set my email (IMAP) application to fetch emails every 2 hours it can't because it can't connect on the first time, so I have to manually connect to the mail application. Is there anything I can do to fix this with a firmware fix? or is it a problem with T-Mobile UK?
    Thanks

    It's the Yahoo servers. whether or not they are up and running have nothing to do with it. Password rejection is an ongoing problem with Yahoo. Sometimes it is caused by more then one device tryiing to access the Yahoo server with the same username and password at the same time or within minutes of one another. Yahoo by default only allows one connection for X amount of time. So if you have a smart phone with the yahoo mail setup on it and it tries to access the server and then your computer tries to access the server it will reject the request. Giving you the bad password dialog.
    Switch your primary email over to Google Mail as Google does not have these restrictions and you can actually use IMAP with Google mail.
    You can even forward all your yahoo mail to a google account so you don't have to go and change all your logons and contacts to use Gmail.

  • Problems with album art copying to ipod touch

    I got a 2nd generation ipod touch for christmas and am having some problems with the album art. I have all of the album art set up in itunes, and when I right click on a song and tell it to 'get info' it shows the album art picture fine (in my itunes library as well as in my ipod's music library), but when the song is actually playing on the ipod the screen is just blank. It isn't just the white background with the music notes like a song with no album art at all, it's just a black screen. When I flip the ipod sideways and browse through the albums all of the album art shows up except for a few which are blank as well. Anybody know why this is happening? Another weird thing is that the album art will show up for maybe one or two songs in the album, but the vast majority are just showing a blank black screen with no picture. Anyone else having this problem?

    "And now I can't get rid of that cover w/o deleting the whole songlist."
    are you sure? if you go to either album info (right clicking on the album in grid view) and double clicking in the album art section, you should be able to use any picture you have saved on your machine by navigating to that picture. OR right clicking individual tracks, then get info, and going to 'artwork', and then deleting it there (you might have to delete them all individually, but it beats having the wrong art there)

Maybe you are looking for