Problem with automatic creation of Universes on top of SAP BW - RKF

Hello
When I create Universes on top of SAP BW Querys everythings works fine, except for the Restricted Key Figures. The RKFs are created with the GUID code and not with the Description configured in the Query. I tried making the Key Figure Local and Global in the query without success. Does anyone know what's happening?
I'm using BO XI 3.1 SP2 with SAP BW 7.0.
André

I created universes based on a BW Query in the following situations:
    User specified username and password:   language = PT - Dimension's name OK, RKF are GUID
    User specified username and password:   language = EN - Dimension's name OK, RFK are GUID
    SSO: langue = PT or EN - Dimensions name are Ok and in English - RFK are GUID
I edited prefences of CMC to Portuguese. The same results.
The problem with the RKF still exists.
Is there some way resolve this problem?

Similar Messages

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Problems with Automatic Workflow Customizing

Hi!
I am having problems with Automatic Workflow Customizing (SWU3). I am trying to execute "Configure RFC Destination" manually. I receive the message "Synchronization of passwords failed".
We are using CUA and it is therefor not possible to create the user from SWU3 which means that WF-BATCH has been created in CUA with a pw which is then filled in by me when executing "Configure RFC Destination".
WF-BATCH has authorization SAP_NEW, SAP_ALL
My user also has SAP_NEW and SAP_ALL and usergroup SUPER.
Does anyone know what might be the problem?
Sincerley
Anders Öhrling

Hello Anders,
Check if the user is locked in SU01. Then check if your user has been created in CUA.
It is recommended to delete WF_BATCH. The system will auto create the user ID WF-BATCH and synchronize the password.
Do let me know if your problem is resolved.
Thank you.
Regards,
Manomeet
- Award points if helpful -

Best practices to create Universe on top of SAP BW

Hi Experts,
I would like to know the Best Practices for Creating Universe on top of SAP BW.
1. is it advisable to create Universe on top of SAP BW CUBE directly. in my case , we are starting a fresh BW implementation for one application on SAP BI.7 ; and BOE 3.1
2. if we create a universe on top of BEX Query, what need to be done if want to upgrade to Business Objects 4.0 version.
3. if we create a universe on BEX Query, will SAP is going to support universe on BEX for future releases.
4. what is the support period for BEX and its integration with Business objects.
Thanks
Bhnau.

Hi,
1. is it advisable to create Universe on top of SAP BW CUBE directly. in my case , we are starting a fresh BW implementation for one application on SAP BI.7 ; and BOE 3.1
First go through by below link.This guide describe how you can create universe based on Cube and Query and what features are available via Cube and Query.
http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
You can check on the Page 12 in the PDF what supported by Cube and BW Query while designing of a universe.
Best practices says to design universe on top of one generic query for one Cube because CFK,RFK can not generate in the universe on top of BW Cube.
2. if we create a universe on top of BEX Query, what need to be done if want to upgrade to Business Objects 4.0 version.
check below links.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0d937fa-1261-2e10-6388-e71afb6b5ff6?quicklink=index&overridelayout=true
http://biguru.wordpress.com/
Thanks,
Amit

Can't start laptop - problems with automatic repair, need acces to admin account but there is none. HELP! :(

Hello,
I'm having problems with my windows 8 laptop.
This afternoon I shut it down, and went to work. A few hours later when I came back home I noticed the little blue lights on the keyboard (showing me that the pc was charging and that my wifi is on) were still on. Normally these are off when the pc is turned
off.
I tried starting the laptop but nothing happened, the screen stayed black. I held down the 'on' button to force it to turn off, and turned it on again.
I then got a textmessage on the startup loading screen that there were problems with my C drive (only drive the laptop has), so it went to automatic repair.
*my laptop's language is set to Dutch so I'm translating everything :)*
It gave me 2 options:
1: Restart computer
2: Advanced options.
I tried option 1, didnt work ofcourse, it just restarted and I got back to this screen, so I checked what option 2 had to offer.
I got to a screen with 3 options:
1: Continue to windows 8
2: Solve Problems
3: Shut down
When I tried option 1 the computer just restarted and went back to the same screen.
When I tried option 3 it shut down as it should.
Option 2 gave me 3 other options:
1: Renew PC
2: Factory reset
3: advanced options
Option 1 just restarted my pc and took me back to screen 1.
Option 2 I havent tried yet, because it erases all of my files. This is a last resort.
Option 3 gave me 6 other options:
1: Systemrepair
2: Repair with installationcopy
3: Startuprepair
4: CMD
5: UEFI firmware settings
6. Startupsettings.
I can't use option 1,2,3,4 because I need to log in to an administratoraccount.
The bad part is: the laptop doesn't have an administratoraccount.
It was my parents laptop, and theyve set it up. I always assumed the account was an admin because
I had acces to everything and didn't need a password to run things as admin and such.
Turns out it isn't.
I get this message (translated) when I try to acces one of these:
'You have to log in as administrator to continue, but this pc doesn't have an administratoraccount'.
I can't believe microsoft added a check to see if the pc has an admin account on it, and even added a specific message to show when it doesn't, but they didnt add the option to just use these tools when there is no admin account present? What were they thinking!
Option 5 I havent tried yet, when I click it it says I have to restart to acces these settings, but I dont want to mess with something I know nothing about.
Option 6 gives me a few options like run the pc in safety mode, run windows repair and disable auto-restart after something has gone wrong with windows. But when I select one of these options it doesnt work. It just takes me back to auto repair. It just doesn't
doe anything.
There are no other options. Nothing I can do. My pc is stuck like this. The only thing I *might* be able to do is a factory reset, but I havent tried, and that could also just give me an error about me not being admin.
Some backstory of what I think caused this problem:
I believe the problems started a week ago, last friday.
I'm using a program called 'AVG TuneUp'. This program gave me a message telling me it was 3 months since it had checked my C drive for defects or anything. And it asked me if I wanted it to do so. Unknowing of the problems that would follow, I pressed 'ok'
(or whatever it was).
I had to restart my pc for it to begin, because it could only check the drive during startup. It went to 12% and stayed there for like half an hour, after which I decided to google (on my phone) if that was normal. It turned out that that option doesn't work
well with windows 8 and that lots of people's computers got ruined after using it. I stressed and I tried to shut it down, but since I was still in startup the only thing I could do was force the pc to shut down, so I held down the power button and it shut
down. I restarted and managed to abort the proces. The laptop started fine and everything worked.
A few days later a game/program I use called League of Legends started to act weird, because I could not log in on my account (for the game) anymore. Some error with IE settings, which I was unable to fix. For more info about that go to http://boards.eune.leagueoflegends.com/en/c/help-support-en/8Eoz315J-cant-log-in-to-lol-and-cant-log-in-to-steam-either-weird-coincidence.
Although I doubt it will help.
That forum post also contains a link to a post I made on the Steam forum about not being able to log into steam anymore. (Steam is another program I used). I wasn't able to log into steam anymore about 1-2 days after I wasn't able to log into LoL.
Also at the same time my Norton sortof stopped working. It showed up as active in my task manager and AVG TuneUp program manager, but it wasn't in my task bar and I couldnt acces the control panel.
Then yesterday I checked my pc for errors with AVG TuneUp's 1-click maintenance tool, and it told me my C drive was fragmented badly, so I defragmented it using the tool. Laptop still worked fine after that.
And then today I got the error on startup about my C drive having errors.
Long story shot: Problem is probably caused because I stopped the repair of my C drive with the avg tuneup tool before it was done, however its weird that I'm only experiencing (big) problems a week after that happened.
Hardware info:
It's a Samsung Ativ book 6 (google it for all the specs :) )
RAM: 8 GB DDR3
CPU: intel 3230M @ 2.60 gHz
GPU: AMD Radeon HD 8850M
HDD: 1 TB S-ATAII hard disc
I've found this page:
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-taking-me-to-automatic-repair-but-no/6cbc995e-9ecb-4e28-8d6c-adabdecb8374?rtAction=1424369231072
But I don't really understand what the answering person is saying, and my laptop doesn't have a CD drive..
I really, REALLY hope someone can help me with this, because my laptop is basically 100% 'destroyed'.
Kind regards,
Christian Collaert

Hello,
Perhaps the operating system is incorrectly powering down or shifting the wireless adapter to a low power state in order to improve run time while on battery?
Try going into the Device Manager (filename: DEVMGMT.MSC), locate the wireless adapter under the Network Adapters tree, view its Properties, and on the Power Management tab, disable (un-check) the Allow the computer to turn off this device to save power option.
Please let us know if that makes any difference (or not).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problems with PO creation in SRM in Plan Driven Scenario

Hi experts,
I have a problem with creation of PO from SC in SRM 5.0 (Extended Classic) in Plan Driven Scenario:
We transfer PM order from FI/LO (ECC 5.0) to SRM (the Extended Classic is activated).
SC (External req) is being approved
After approval there is a status on each SC position: "Item in transfer", after a long time status is being changed to "Error in transmition".
PO is not created and I don't know why. Any ideas?
Regards
RafaD

Hi RafaD,
Check for the shopping cart status message in <b>BBP_PD</b>.
Also check the status in application monitor using <b>RZ20</b> then you will get a better picture about the problem.
Check the settings in the SPRO > IMG > SRM > SRM Server > Cross Application basic settings > Define objects in Back end systems.
Also check the following SAP notes which will help you in sorting out the problem :
<b>Note 757625 - Incorrect Status I1112->analysis report</b>
<b>Note 1040878 - Cannot transfer shopping carts with status I1112</b>
<b>Note 631513 - Shopping cart in status 'Erroneous transfer' without alert</b>
<b>Note 1003350 - Follow-on doc BE PO not created for SC</b>
Based on the error details you get through BBP_PD & RZ20, you can apply any of the relevant SAP notes mentioned above.
Hope this will solve your problem.
Let me know the outcome.
Rgds,
Teja

Problems with automatically managing

So, I've been having a few problems with my new 30G 5g ipod, and I've gone through the usual to try and fix them. I've reinstalled all the software, restored my ipod, tried other USB ports, and have even gone as far as reformating my computer. Most of the problems I've been able to overcome. However, the problem I have now is that after I restore my ipod and I try to automatically update all my music, it won't. Itunes shows that songs are being uploaded, but after so many songs are uploaded (usually around 100 but has happend with less) it seems like the ipod looses its connection with my computer. After the connection is lost it reconnects, itunes sees it as hooked up again, and tries to start uploading again in this perpetual cycle.
So, that is my problem, but as it seems there are always make shift ways to fix things, and I've found one. I have accomplished getting all my songs onto my ipod (about 1000) by using the manually update songs, and transferring only a couple songs at a time.
So, I have a couple of questions:
First of all, is anybody having this problem with updating songs to their ipod?
Secondly, if you are, have you found any sort of fix?
Lastly, if nobody is having the same problem, my concern is now that I've got my ipod sort of working (via my make shift manual update) will I run into future problems (especially after waranty is up) and does this problem warant getting a new ipod from apple? Because let's be honest, it isn't working correctly.

Does your computer meet the minimum requirements? If your using Win XP, not having service pack 1 and 2 can cause problems. Win 2k needs to have SP4. Any programs running in the back ground that might interfere with it? Not all USB ports are high powered, might try charging your iPod for 4 hours before transfering. Try disconnecting other USB devices, especially if they are some other form of storage device. Here's an article about the ipod discharging while transferring. Let us know what you find out.
http://docs.info.apple.com/article.html?artnum=93888

Problem with the creation of the _pageflow folder in the portal project

Hi,
I have developed one portal project on the BEA Weblogic Portal server version 9.2. And I am having a quite a number of pageflow portlets in my application.I am facing a weird problem with the workshop(BEA Workshop for Weblogic Platform 9.2.1). It is not generating the folder _pageflow required for all the protlets when we build it.I tried cleaning and building it number of times but it is of no use.
Is it a bug in the weblogic server version or do I really miss something in the workshop settings?
Please help.
Thanks & Regards
Prakash.

Hi Dmitry,
What state are the tasks in? Are they in Active, Running, or Completed? There will only be output files if the tasks are in state running or completed.
Additionally, what is the status of the pool which the tasks ran on? If the pool VMs have been deallocated (or the pool itself has been deleted) then the task files will be lost. This is because the files of the tasks reside on the VM which ran
the task.
Lastly, you can check the file retention time of the tasks in the BatchExplorer UI by selecting the task and looking in the "Task Details" tab for "TaskConstriants.RetentionTime" to see what that is set to - if the retention time has
passed (i.e. retention time was 1h but the task was run 2h ago), then the files will be cleaned up.
It sounds like you already are using BatchExplorer, but we recently published a blog post which has some specific instructions for using BatchExplorer to debug (how to RDP into a VM for example), which you can find
here - it also has some code snippets for how BatchExplorer performs the operations that it does.
Let us know what you find from your investigation and we can help you figure out why your tasks don't have output files.

Still have a problem with collage creation.

My problem with trying to create a collage is still with me, I thank those that answered, and those that did answer are you Adobe staff if not where are they with the answers?

Hi again,
Adobe staff do frequent this space from time to time but as nobody on the forum has been able to help, I suggest you raise your problems with PSE9 directly with the tech support team. If you have paid for the current product you are entitled to help.

Sap4rails - Problem with automatic handling of data types under Windows

Hello all,
I've been trying to develop my own application using sap4rails library but whenever I call one of standard RFCs I always get strange results. Here is the piece of the code from my model which gets data from CURRENCY_LIST table:
require "sap4rails"
class App < SAP4Rails
@@funcs = [
       'BAPI_CURRENCY_GETLIST',
# User defined instance methods here
attr_accessor :message
class << self
def getlist()
    RAILS_DEFAULT_LOGGER.info("[App]#getlist ")
    App.BAPI_CURRENCY_GETLIST.call()
    return App.BAPI_CURRENCY_GETLIST.currency_list.rows()
end
end
here is the code from the controller
class AppController < ApplicationController
layout "standard-layout"
def index
list
render_action 'list'
end
def list
    RAILS_DEFAULT_LOGGER.info("[LIST] action started...")
    @currencies = App.getlist()
end
end
end the code from the view:
<html>
<head>
    <title> Currencies </title>
</head>
<body>
    <h1>Listing Currencies</h1>
     <table border="1">
       <tr>
         <% @currencies.first.each_key {|key| %>
         <th><%= key %></th>
         <% } %>
       </tr>
       <% for currency in @currencies %>
       <tr>
         <% currency.each_value {|val| %>
         <td><%= val %></td>
         <% } %>
       </tr>
       <% end %>
     </table>
</body>
</html>
As you can see everything is just simple. I run my application on the Windows XP OS and always get such result:
<html>
<head>
   <title>Currencies and Exchange Rates: index</title>
</head>
<body>
   <html>
<head>
    <title> Currencies </title>
</head>
<body>
    <h1>Listing Currencies</h1>
     <table border="1">
       <tr>
         <th>VALID_TO</th>
         <th>ALT_CURR</th>
         <th>LONG_TEXT</th>
         <th>CURRENCY_ISO</th>
         <th>CURRENCY</th>
       </tr>
       <tr>
         <td>oran peseta     </td>
         <td>231And</td>
         <td>                                                                                </td>
         <td>099991</td>
         <td>ADP ADP02</td>
       </tr>
       <tr>
         <td>babwean Dollar </td>
         <td>231Zim</td>
         <td>                                                                                </td>
         <td>699991</td>
         <td>ZWD ZWD71</td>
       </tr>
</table>
</body>
</html>
It seems like there is sth wrong with mapping data types from R/3 to data types in Ruby. Does anyone has an idea what could be wrong? I would be very grateful for any help.
Best Regards
Michal M.

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

MSI P55-GD65 - Problem with automatic fan control.

Hello.
I wish to share story of my fan speed controller.
Lately I've upgraded my machine to modern specs (look at signature) and I was quite happy about that.
It worked flawlessly for about week.
My H/W Bios settings was - CPU Smart Fan Target = 60°C and minimal fan speed 50%.
I was amazed how nicely GD65 maintained between heat and speed.
Yesterday, I've noticed that my fan is really quiet all the time, even when gaming (before it accelerate speed while hardcore gaming settings). I was quite content about that, until my computer crashed due to overheating while playing Battleforge match.
After reboot I've ran Intel BurnTest and HWmonitor. OH my, what was my surprise when I saw that fan speed is always 50% and do not speeds up when cores are heating up!
I started to checking things out. What I've discovered:
-(CPU Smart Fan ON) Fan is always at minimal speed given in BIOS. It doesn't accelerate even if CPU is burning.
-(CPU Smart Fan ON) Fan speed cannot be controlled by any program (like SpeedFan).
-(CPU Smart Fan OFF = 100% fan speed) Fan speed CAN be controlled by program like SpeedFan, which saves me from fan buzzing.
I've try to fix that by:
-Checking cables.
-Clearing CMOS.
-Updating BIOS to 1.6.
-Praying.
And still nothing.
My conclusion:
Fan speed cannot be change when Smart Fan is on, it locks fan speed at minimal speed given in bios.
Now I just hoping that this is somehow stock fan fault, new Zalman CNPS 10X QUIET is in delivery.

No problem here with Target 55° and Speed 37.5%.
Fan runs at 1330 below 58° and 2050 above which is max.
The CPU is running at 3050 MHz because of XMP 'overclocking'
Have reverted to BIOS version 1.3, due to XMP problems with other versions.

E61: problems with automatically receiving emails

Hi.. I have had my E61 for quite a while already but am having problems with its internet connectivity. Basically everytime I attempt to connect to the mobile internet it very rarely connects on the first attemp, but normally I have to try 2-3 times for it to connect (even with full 3G reception. This means that when I set my email (IMAP) application to fetch emails every 2 hours it can't because it can't connect on the first time, so I have to manually connect to the mail application. Is there anything I can do to fix this with a firmware fix? or is it a problem with T-Mobile UK?
Thanks

It's the Yahoo servers. whether or not they are up and running have nothing to do with it. Password rejection is an ongoing problem with Yahoo. Sometimes it is caused by more then one device tryiing to access the Yahoo server with the same username and password at the same time or within minutes of one another. Yahoo by default only allows one connection for X amount of time. So if you have a smart phone with the yahoo mail setup on it and it tries to access the server and then your computer tries to access the server it will reject the request. Giving you the bad password dialog.
Switch your primary email over to Google Mail as Google does not have these restrictions and you can actually use IMAP with Google mail.
You can even forward all your yahoo mail to a google account so you don't have to go and change all your logons and contacts to use Gmail.

I have problems with automatic accessing to a host HP ALM 11.52

I have a license for 5 jobs, and at the moment I'm using 4 machines, I can't use the fifth because I have problems with planning. I designate the start time and the status of Operations , but when the time comes I have problem with login to the system and the status changes to not operational. want to know what is the reason?
log file:
Error getting task Unauthorized <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"/> <title>Error 401 Unauthorized</title> </head> <body><h2>HTTP ERROR 401</h2> <p>Problem accessing /qcbin/comet. Reason: <pre> Unauthorized</pre></p><hr /><i><small>Powered by Jetty://</small></i><br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> </body> </html>
Throwing exception: Operation <AbortRequested> requested by server on execution item type <hpalmtestexecution> was not handled, there's no such active execution item type.
Error processing new task HP.ALM.Lab.Agent.ExecutionAgentAPI.Exceptions.ExecutionItemException ---> HP.ALM.Lab.Agent.ExecutionAgentAPI.Exceptions.OperationOnIdleException: Operation <AbortRequested> requested by server on execution item type <hpalmtestexecution> was not handled because there is no such active execution item type. в HP.ALM.Lab.Agent.ExecutionManager.Task.TaskManager.UpdateTask(ExecutionItem executionItem) в HP.ALM.Lab.Agent.ExecutionManager.Activities.AsyncGetTaskActivity.HandleExecutionItem(String encryptedXmlString) --- Конец трассировки внутреннего стека исключений ---

everything worked 4 months ago, but maybe there were some updates and something has changed, and now one machine not working

Problem with LinkedList Creation

Hello,
I am trying to convert from using an arraylist to a linkedlist for my project because I need add and remove elements. When I create a new linkedlist, I get this error:
//create a new linkedlist object
LinkedList sizeList = new LinkedList();
Error:
"LinkedList is a raw type. References to generic type LinkedList<E> should be parameterized."Currently, my arraylist is used this way:
     TextArea roomDisplay[] = new TextArea[16]; In my frame, I have 16 text areas. For each index in that array, I have different texts, but since arraylists are unsuitable for insertions and deletions, I need to convert this collection type to a linkedlist, and I am kind of lost right now.
I know for a linkedlist, in order to add text, I need to switch to the add() method rather than setText() method as I currently do right now using arraylist.
Please guide me on how to do this conversion.Thanks.

This helps a lot. I also read the pdf file posted at the link you provided, but am new to this.
So now I am trying to add the first (as a test) element to one of my panels in my frame:
          sizeList.add(new TextArea("test"));
          roomPanel.add(List<TextArea>(sizeList));the first line compiled ok, but there's a problem with the second one. I guess my parameter's wrong or the code is just way off. The error is: "List cannot be resolved. TextArea cannot be resolved."
I also tried this statement:
roomPanel.add(sizeList);And got error: The method add(Component) in the type Container is not applicable to the argument (List<TextArea>).
I don't understand why it won't take it.

Universe on top of SAP BW

Hi Experts,
I need help in creating a universe on top of BPC Cubes.
While creating Universe connection, I have followed the steps below:
1. Connection type:
SAP BusinessObjects > Business Planning and Consolidation > OLE DB for OLAP Providers
2. Username: DOMAIN\USERNAME
3. Server: BPC Server IP Address (tried with port as well)
Then I am getting the following error:
DBD: An error has occurred while attempting to connect to the OLAP server. Failed to initialize (returned server error (Returned DB_SEC_E_AUTH_FAILED (0x80040e4d)))
Any Idea where I am going wrong ?
Product Versions:
SAP BPC 7.5 SP 07
BO XI 3.1 SP2 FP 2.9
Thanks and Regards,
PASG

Hi,
Could you give more details around what host file you are refering to? As I have the same error message.
Thanks

Problem with automatic creation of Universes on top of SAP BW - RKF

Similar Messages

Maybe you are looking for