Problem with automatic outbound IDoc creation

Hi all!!!
I want to configure an IDoc to be created when an Installation (IBASE) is saved.
To do this, I use the IDoc type CRMXIF_IBASE_SAVE01, assign a message type, link with the FM APPL_IDOC_INPUTM to create the IDoc, create a partner profile, create the process code and set on the message type.
After this, when I create an Installation, Must not the IDoc be created?
Is the process correct or lack some step?
Thanks and regards,
Manuel.

And, on the partner profile, I can´t set the process code on the outbound parameter because the field doesn´t appear.
I think this could be the error.

Similar Messages

Problems with processing outbound IDocs in background processes

Hello everybody,
I have a question for working with ABAP-PSS Ports.
The behvaiour is that I want to send master data, for example customers, to a function module. This function module works like an converter which process and writes the files in the filesystem.
Following situation:
- I have defined a partner System with different message types, for example DEBMAS and everthing what is necessary to replicate data to partner systems.
- I have defined also a Port like ABAP-PPS Port for calling my own function module.
- If I runs the program I process only 50 Idocs per process because otherwise i can happen that there are to many look entries in the system and the job crashs. (For example all customers are around 50000 Idocs).
Now my problem is that the worker for processing idocs starts each process in the foreground and in parallel.
But this is very strange! Because then all dialog processes are reserved and the system will be very slow!
How can I configure the Port or what have I to implement in my fucntion module to start processing in background (this is the very important point) and maybe allow the program only to use one or two process at the same time?
I have found on the function module EDI_DOCUMENT_CLOSE_PROCESS which I the parameter "Background". What thas this mean? I have set B for this but it has no effect!
Regards
Christian

I know that for inbound interface it is possible to define if in foreground or background and if parallel processing is allowed.
Who knows how I can do this also for outbond?

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Problem with HR inbound IDoc

Hi,
I have a problem with processing inbound IDocs from an external payroll system to infotype 0008. The process is quite simple; salary changes from the payroll system is recorded to the corresponding employee's infotype 0008. When testing I noticed that that the new record is recorded as is. For example if there is already an existing record with the validity dates 01.01.2010 - 31.12.9999 and the new record in the IDoc is 01.01.2011 - 31.12.9999, the new record is written as is. I would expect the system to delimit the old record correctly - similar to what would happen if you maintain records online. There is no error checking or any kind of processing done by the system.
I did some debugging and found out that the function module linked to process code HRMD writes the information directly to the database. If this is a standard way of doing this, it is really unusual.
Has anybody else encountered this? Any pointers?
Thanks.
Edited by: Theo Droste on Jan 20, 2011 11:56 AM

Hi
This is correct, the ale programme writes the data directly to the database, I have faced this isssue on occassion. I once raised an oss message on this as well, and sap confirms this is what happens. If it is a sap to sap ale, it somehow seems to work, - this could be because the outgoing idocs are created by sap itself but if it is a non sap to sap ale the onus is on us to ensure that the external system sends the correct data to sap in the way we intend it to be displayed.
that is how it has been in my experience. It is unusual, but apparently not impossible. Please let us know if you find out anything different.

Problems with Automatic Workflow Customizing

Hi!
I am having problems with Automatic Workflow Customizing (SWU3). I am trying to execute "Configure RFC Destination" manually. I receive the message "Synchronization of passwords failed".
We are using CUA and it is therefor not possible to create the user from SWU3 which means that WF-BATCH has been created in CUA with a pw which is then filled in by me when executing "Configure RFC Destination".
WF-BATCH has authorization SAP_NEW, SAP_ALL
My user also has SAP_NEW and SAP_ALL and usergroup SUPER.
Does anyone know what might be the problem?
Sincerley
Anders Öhrling

Hello Anders,
Check if the user is locked in SU01. Then check if your user has been created in CUA.
It is recommended to delete WF_BATCH. The system will auto create the user ID WF-BATCH and synchronize the password.
Do let me know if your problem is resolved.
Thank you.
Regards,
Manomeet
- Award points if helpful -

Outbound idoc creation with MIGO

Hello,
I need to create outbound idoc when the GR is created (MIGO).
I created one output type (ME) with the processing program RSNASTED and form routine ALE_PROCESSING. Unfortunately, the rsnasted does not work, as I can not create message type MBGMCR in BD64 (Model). MBGMCR belongs to BAPI.
Do you know the way how to proceed?

yes it is BAPI. sorry for the confusion.
Edited by: Vijay Babu Dudla on Sep 24, 2008 6:13 AM

Problem with automatic creation of Universes on top of SAP BW - RKF

Hello
When I create Universes on top of SAP BW Querys everythings works fine, except for the Restricted Key Figures. The RKFs are created with the GUID code and not with the Description configured in the Query. I tried making the Key Figure Local and Global in the query without success. Does anyone know what's happening?
I'm using BO XI 3.1 SP2 with SAP BW 7.0.
André

I created universes based on a BW Query in the following situations:
    User specified username and password:   language = PT - Dimension's name OK, RKF are GUID
    User specified username and password:   language = EN - Dimension's name OK, RFK are GUID
    SSO: langue = PT or EN - Dimensions name are Ok and in English - RFK are GUID
I edited prefences of CMC to Portuguese. The same results.
The problem with the RKF still exists.
Is there some way resolve this problem?

Can't start laptop - problems with automatic repair, need acces to admin account but there is none. HELP! :(

Hello,
I'm having problems with my windows 8 laptop.
This afternoon I shut it down, and went to work. A few hours later when I came back home I noticed the little blue lights on the keyboard (showing me that the pc was charging and that my wifi is on) were still on. Normally these are off when the pc is turned
off.
I tried starting the laptop but nothing happened, the screen stayed black. I held down the 'on' button to force it to turn off, and turned it on again.
I then got a textmessage on the startup loading screen that there were problems with my C drive (only drive the laptop has), so it went to automatic repair.
*my laptop's language is set to Dutch so I'm translating everything :)*
It gave me 2 options:
1: Restart computer
2: Advanced options.
I tried option 1, didnt work ofcourse, it just restarted and I got back to this screen, so I checked what option 2 had to offer.
I got to a screen with 3 options:
1: Continue to windows 8
2: Solve Problems
3: Shut down
When I tried option 1 the computer just restarted and went back to the same screen.
When I tried option 3 it shut down as it should.
Option 2 gave me 3 other options:
1: Renew PC
2: Factory reset
3: advanced options
Option 1 just restarted my pc and took me back to screen 1.
Option 2 I havent tried yet, because it erases all of my files. This is a last resort.
Option 3 gave me 6 other options:
1: Systemrepair
2: Repair with installationcopy
3: Startuprepair
4: CMD
5: UEFI firmware settings
6. Startupsettings.
I can't use option 1,2,3,4 because I need to log in to an administratoraccount.
The bad part is: the laptop doesn't have an administratoraccount.
It was my parents laptop, and theyve set it up. I always assumed the account was an admin because
I had acces to everything and didn't need a password to run things as admin and such.
Turns out it isn't.
I get this message (translated) when I try to acces one of these:
'You have to log in as administrator to continue, but this pc doesn't have an administratoraccount'.
I can't believe microsoft added a check to see if the pc has an admin account on it, and even added a specific message to show when it doesn't, but they didnt add the option to just use these tools when there is no admin account present? What were they thinking!
Option 5 I havent tried yet, when I click it it says I have to restart to acces these settings, but I dont want to mess with something I know nothing about.
Option 6 gives me a few options like run the pc in safety mode, run windows repair and disable auto-restart after something has gone wrong with windows. But when I select one of these options it doesnt work. It just takes me back to auto repair. It just doesn't
doe anything.
There are no other options. Nothing I can do. My pc is stuck like this. The only thing I *might* be able to do is a factory reset, but I havent tried, and that could also just give me an error about me not being admin.
Some backstory of what I think caused this problem:
I believe the problems started a week ago, last friday.
I'm using a program called 'AVG TuneUp'. This program gave me a message telling me it was 3 months since it had checked my C drive for defects or anything. And it asked me if I wanted it to do so. Unknowing of the problems that would follow, I pressed 'ok'
(or whatever it was).
I had to restart my pc for it to begin, because it could only check the drive during startup. It went to 12% and stayed there for like half an hour, after which I decided to google (on my phone) if that was normal. It turned out that that option doesn't work
well with windows 8 and that lots of people's computers got ruined after using it. I stressed and I tried to shut it down, but since I was still in startup the only thing I could do was force the pc to shut down, so I held down the power button and it shut
down. I restarted and managed to abort the proces. The laptop started fine and everything worked.
A few days later a game/program I use called League of Legends started to act weird, because I could not log in on my account (for the game) anymore. Some error with IE settings, which I was unable to fix. For more info about that go to http://boards.eune.leagueoflegends.com/en/c/help-support-en/8Eoz315J-cant-log-in-to-lol-and-cant-log-in-to-steam-either-weird-coincidence.
Although I doubt it will help.
That forum post also contains a link to a post I made on the Steam forum about not being able to log into steam anymore. (Steam is another program I used). I wasn't able to log into steam anymore about 1-2 days after I wasn't able to log into LoL.
Also at the same time my Norton sortof stopped working. It showed up as active in my task manager and AVG TuneUp program manager, but it wasn't in my task bar and I couldnt acces the control panel.
Then yesterday I checked my pc for errors with AVG TuneUp's 1-click maintenance tool, and it told me my C drive was fragmented badly, so I defragmented it using the tool. Laptop still worked fine after that.
And then today I got the error on startup about my C drive having errors.
Long story shot: Problem is probably caused because I stopped the repair of my C drive with the avg tuneup tool before it was done, however its weird that I'm only experiencing (big) problems a week after that happened.
Hardware info:
It's a Samsung Ativ book 6 (google it for all the specs :) )
RAM: 8 GB DDR3
CPU: intel 3230M @ 2.60 gHz
GPU: AMD Radeon HD 8850M
HDD: 1 TB S-ATAII hard disc
I've found this page:
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-taking-me-to-automatic-repair-but-no/6cbc995e-9ecb-4e28-8d6c-adabdecb8374?rtAction=1424369231072
But I don't really understand what the answering person is saying, and my laptop doesn't have a CD drive..
I really, REALLY hope someone can help me with this, because my laptop is basically 100% 'destroyed'.
Kind regards,
Christian Collaert

Hello,
Perhaps the operating system is incorrectly powering down or shifting the wireless adapter to a low power state in order to improve run time while on battery?
Try going into the Device Manager (filename: DEVMGMT.MSC), locate the wireless adapter under the Network Adapters tree, view its Properties, and on the Power Management tab, disable (un-check) the Allow the computer to turn off this device to save power option.
Please let us know if that makes any difference (or not).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem related to Outbound Delivery creation via Background Job

Hi ,
We are using the program RVV50R10C for creating OBD incase of STO .
Z variant is created to take care of selection parameters which inlcudes Shipping Point , Delivery creation date , Calc Rule, Delivery priority and shipping conditions.
The job is scheduled to run for every 10 minutes .
As planned the job is running for every 10 minutes but the OBD are created after 1 hour .
What are possible causes of this error.?
Please note that there exists enough stock.
Regards
Ramesh Ch

I think you will have the same problem when doing it manually with VL10B.
The creation is based on entries in an index. there is a userexit where you can influence how and when an entry goes into the index. E.g. you can speed up the overall performance if you do not update the index all the time, instead you are doing this with a background job from time to time.
Check if this is the case in your system.
this note may give you some hints:
Note 356061 - Incorrect index compilation caused by own checks

Problems with deleted outbound deilverys

Hi all,
I have the following problem with a deleted outbound delivery. The issue is that a sales order was created and a outbound delivery was assigned to this sale order, but somebody deleted the outbound delivery, unassigned the corresponding material and the shipping person assigned this outbound to another sale order believing that there were still plenty of material to cover both sales orders.
The help needed here is how do I know which user deleted the outbound delivery is there a record for that??
I'll appreciate your help a lot.
Best Regards,
Erik Espinosa

Malice is seldom behind stuff like this, from my experiences.
Prime candidate is human error (possibly with an attempt to fix it, which also includes hiding it...).
=> Send the sales folks a mail with the order number and description in it and ask them whether any of them know about it or are aware that an error might have been made. This gives them the opportunity to realize the implications of their mistake, or "own up" to it.
Depending on how your system is integrated and how many "cowboy" developers you had / have around, faulty config and even naive user-exits cannot be completely excluded.
=> Hard to find (better to prevent), but doing a where-used-list on the related VK* tables to see whether any Z-programs turn up is a start.
Either way, with the sales order number, you should be able to find the user context which performed these actions via the business change documents.
=> Take a look at the SCD* transactions, and the CD* tables.
If it was a batch user at midnight... then see "Hard to find..." above.
Cheers,
Julius

Idoc Output Control Problem, Want to prevent IDoc creation

I want to prevent an IDoc from being simply created if a certain condition is not met. However if I set the sy-subrc = 4 and exit from the routine it still goes ahead and creates an outbound IDoc. Here is the code from the routine. I have debugged into the code and it DOES get executed when i change order info header from VA02. I have already debugged to make sure that the following piece of code does get executed and the SY-SUBRC does get set to 4 before the execution exits the Form given below. Please suggest what I m doing wrong?
FORM KOBED_601.
If the document is incomplete (Price not on list)then no o/p is created
IF KOMKBV1-UVPRS NE c_c.
SY-SUBRC = 4.
EXIT. "(also tried using RETURN)
endif.
*} INSERT
ENDFORM.
FORM KOBEV_601.
*{ INSERT ECDK903987 1
Falls Verkaufsbeleg vollständig ist, soll Nachricht erzeugt werden
If the sales document is complete, then the output should be created.
*} INSERT
ENDFORM.

Wait. I think I have figured out part of the problem. The problem is that both the VOFM routine that I have written 603 is executed followed by standard SAP VOFM routine 002. Though I checked that the configuration for the output type that I m using ZBAO has the right VOFM routine number 603 set, it still does execute the Standard SAP VOFM routine 002 after executing my routine, which seems to override the SY-SUBRC = 4 that I have set. If I set the SY-SUBRC = 4 in debug mode in routine 002 then the IDoc doesnt get created.
Is there a way I can prevent it from executing the standard SAP VOFM routine 002?

SAP IS Retail Outbound Idoc Creation for New Articles

Hi SAP Gurus,
Good day!
I would like to inquire if you are familiar with the necessary set up to create OUTbound Idocs to be sent to POS whenever a new article is created. I have already activated the Change Pointers for the Message Types for IS Retail via BD50. However, this did not solve the issue. I have an existing material which ably triggers the idoc change;however, when I try accessing the materials I created recently, no idocs are created.
Your help is most appreciated.
Best regards,

Hi,
Check in WE20 partner profiles > customer type KU - Customer > choose your store number > under outbound parameters all relevant message type must defined
Look at the following links for more details:
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
http://allian.uclv.net/saphelp/helpdata/EN/50/94f500470e11d1894a0000e8323352/frameset.htm
Hope you got answer
regards
Satish

Outbound IDOC creation issues.

Hi,
I am genarating an outbound IDOC using FM 'MASTER_IDOC_DISTRIBUTE'.
My program works well, IDOC has been genarated with status 01, 30 & 03.
But the IDOC has not been send to the destination system.
But If fire it using test transaction WE19, its been received in the destination system.
I can't figure out this issue.. Do I have to use COMMIT statement.
Thanx for your time..
Cheers,
Sam

Hi,
I have checked throughly, The only difference between the IDOC fired programmatically N Test txn WE19 is, when I display control of IDOC, in the Details tab Under EDI options Message type filled in test txn but not in the other one.
But I am supplying message type while calling MASTER_IDOC_DISTRIBUTE FM.
Thanx for your time.
Cheers,
Senthil

Problems with automatically managing

So, I've been having a few problems with my new 30G 5g ipod, and I've gone through the usual to try and fix them. I've reinstalled all the software, restored my ipod, tried other USB ports, and have even gone as far as reformating my computer. Most of the problems I've been able to overcome. However, the problem I have now is that after I restore my ipod and I try to automatically update all my music, it won't. Itunes shows that songs are being uploaded, but after so many songs are uploaded (usually around 100 but has happend with less) it seems like the ipod looses its connection with my computer. After the connection is lost it reconnects, itunes sees it as hooked up again, and tries to start uploading again in this perpetual cycle.
So, that is my problem, but as it seems there are always make shift ways to fix things, and I've found one. I have accomplished getting all my songs onto my ipod (about 1000) by using the manually update songs, and transferring only a couple songs at a time.
So, I have a couple of questions:
First of all, is anybody having this problem with updating songs to their ipod?
Secondly, if you are, have you found any sort of fix?
Lastly, if nobody is having the same problem, my concern is now that I've got my ipod sort of working (via my make shift manual update) will I run into future problems (especially after waranty is up) and does this problem warant getting a new ipod from apple? Because let's be honest, it isn't working correctly.

Does your computer meet the minimum requirements? If your using Win XP, not having service pack 1 and 2 can cause problems. Win 2k needs to have SP4. Any programs running in the back ground that might interfere with it? Not all USB ports are high powered, might try charging your iPod for 4 hours before transfering. Try disconnecting other USB devices, especially if they are some other form of storage device. Here's an article about the ipod discharging while transferring. Let us know what you find out.
http://docs.info.apple.com/article.html?artnum=93888

Problem with extension of idoc in XI

Hello All,
I've extended an Idoc in R/3 with new segment.
That new idoc extension i've mentained in t/code IDX2
Also, i've imported the new extended idoc in XI in IR.
Next i've done the related mapoping for the new segment in IR.
In ID, do i need to change the old idoc name with new extension idoc which i'm using in the Receiver Agreement
After doing all these above modifications..i've receving the below mentioned error message
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>I::000</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: I::000</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Pls. let me know how i need to proceed further.
Thanks in advance!!!
Regards
Prasad

Hello Prasad,
Go through these discussions....
<IDOC_ADAPTER> ATTRIBUTE_IDOC_METADATA
Re: ERROR: "IDOC_ADAPTER" / "ATTRIBUTE_IDOC_METADATA"
File2IDoc Adapter Error
Hope the above links are very helpful to you..
Thanks,
Satya Kumar

Problem with automatic outbound IDoc creation

Similar Messages

Maybe you are looking for