Problem with automatic sending of IDOC immediately
Hi guys,
We are having probme with IDOC that is not being sent immediately... it is configured to send immediately, however it is sitting in Status 30...
Is there anything wrong with it? Is there any workflow that was not activated?
Thanks a lot!
Rgds,
mark
I think the processing mode in partner profiles is still set to "Collect IDocs" then IDocs will be in status 30 on creation and have to be dispatched to the receiver via a scheduled program using i.e. RESOUT00. please check the RESOUT00 is scheduled in the background?
This program would change the status of the IDocs from 30 to 03.
a®
Similar Messages
-
Problem with Automatic Replies or Out of Office
Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
: https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA... -
Problems with Automatic Workflow Customizing
Hi!
I am having problems with Automatic Workflow Customizing (SWU3). I am trying to execute "Configure RFC Destination" manually. I receive the message "Synchronization of passwords failed".
We are using CUA and it is therefor not possible to create the user from SWU3 which means that WF-BATCH has been created in CUA with a pw which is then filled in by me when executing "Configure RFC Destination".
WF-BATCH has authorization SAP_NEW, SAP_ALL
My user also has SAP_NEW and SAP_ALL and usergroup SUPER.
Does anyone know what might be the problem?
Sincerley
Anders ÖhrlingHello Anders,
Check if the user is locked in SU01. Then check if your user has been created in CUA.
It is recommended to delete WF_BATCH. The system will auto create the user ID WF-BATCH and synchronize the password.
Do let me know if your problem is resolved.
Thank you.
Regards,
Manomeet
- Award points if helpful - -
Hello,
I'm having problems with my windows 8 laptop.
This afternoon I shut it down, and went to work. A few hours later when I came back home I noticed the little blue lights on the keyboard (showing me that the pc was charging and that my wifi is on) were still on. Normally these are off when the pc is turned
off.
I tried starting the laptop but nothing happened, the screen stayed black. I held down the 'on' button to force it to turn off, and turned it on again.
I then got a textmessage on the startup loading screen that there were problems with my C drive (only drive the laptop has), so it went to automatic repair.
*my laptop's language is set to Dutch so I'm translating everything :)*
It gave me 2 options:
1: Restart computer
2: Advanced options.
I tried option 1, didnt work ofcourse, it just restarted and I got back to this screen, so I checked what option 2 had to offer.
I got to a screen with 3 options:
1: Continue to windows 8
2: Solve Problems
3: Shut down
When I tried option 1 the computer just restarted and went back to the same screen.
When I tried option 3 it shut down as it should.
Option 2 gave me 3 other options:
1: Renew PC
2: Factory reset
3: advanced options
Option 1 just restarted my pc and took me back to screen 1.
Option 2 I havent tried yet, because it erases all of my files. This is a last resort.
Option 3 gave me 6 other options:
1: Systemrepair
2: Repair with installationcopy
3: Startuprepair
4: CMD
5: UEFI firmware settings
6. Startupsettings.
I can't use option 1,2,3,4 because I need to log in to an administratoraccount.
The bad part is: the laptop doesn't have an administratoraccount.
It was my parents laptop, and theyve set it up. I always assumed the account was an admin because
I had acces to everything and didn't need a password to run things as admin and such.
Turns out it isn't.
I get this message (translated) when I try to acces one of these:
'You have to log in as administrator to continue, but this pc doesn't have an administratoraccount'.
I can't believe microsoft added a check to see if the pc has an admin account on it, and even added a specific message to show when it doesn't, but they didnt add the option to just use these tools when there is no admin account present? What were they thinking!
Option 5 I havent tried yet, when I click it it says I have to restart to acces these settings, but I dont want to mess with something I know nothing about.
Option 6 gives me a few options like run the pc in safety mode, run windows repair and disable auto-restart after something has gone wrong with windows. But when I select one of these options it doesnt work. It just takes me back to auto repair. It just doesn't
doe anything.
There are no other options. Nothing I can do. My pc is stuck like this. The only thing I *might* be able to do is a factory reset, but I havent tried, and that could also just give me an error about me not being admin.
Some backstory of what I think caused this problem:
I believe the problems started a week ago, last friday.
I'm using a program called 'AVG TuneUp'. This program gave me a message telling me it was 3 months since it had checked my C drive for defects or anything. And it asked me if I wanted it to do so. Unknowing of the problems that would follow, I pressed 'ok'
(or whatever it was).
I had to restart my pc for it to begin, because it could only check the drive during startup. It went to 12% and stayed there for like half an hour, after which I decided to google (on my phone) if that was normal. It turned out that that option doesn't work
well with windows 8 and that lots of people's computers got ruined after using it. I stressed and I tried to shut it down, but since I was still in startup the only thing I could do was force the pc to shut down, so I held down the power button and it shut
down. I restarted and managed to abort the proces. The laptop started fine and everything worked.
A few days later a game/program I use called League of Legends started to act weird, because I could not log in on my account (for the game) anymore. Some error with IE settings, which I was unable to fix. For more info about that go to http://boards.eune.leagueoflegends.com/en/c/help-support-en/8Eoz315J-cant-log-in-to-lol-and-cant-log-in-to-steam-either-weird-coincidence.
Although I doubt it will help.
That forum post also contains a link to a post I made on the Steam forum about not being able to log into steam anymore. (Steam is another program I used). I wasn't able to log into steam anymore about 1-2 days after I wasn't able to log into LoL.
Also at the same time my Norton sortof stopped working. It showed up as active in my task manager and AVG TuneUp program manager, but it wasn't in my task bar and I couldnt acces the control panel.
Then yesterday I checked my pc for errors with AVG TuneUp's 1-click maintenance tool, and it told me my C drive was fragmented badly, so I defragmented it using the tool. Laptop still worked fine after that.
And then today I got the error on startup about my C drive having errors.
Long story shot: Problem is probably caused because I stopped the repair of my C drive with the avg tuneup tool before it was done, however its weird that I'm only experiencing (big) problems a week after that happened.
Hardware info:
It's a Samsung Ativ book 6 (google it for all the specs :) )
RAM: 8 GB DDR3
CPU: intel 3230M @ 2.60 gHz
GPU: AMD Radeon HD 8850M
HDD: 1 TB S-ATAII hard disc
I've found this page:
http://answers.microsoft.com/en-us/windows/forum/windows_8-system/windows-8-taking-me-to-automatic-repair-but-no/6cbc995e-9ecb-4e28-8d6c-adabdecb8374?rtAction=1424369231072
But I don't really understand what the answering person is saying, and my laptop doesn't have a CD drive..
I really, REALLY hope someone can help me with this, because my laptop is basically 100% 'destroyed'.
Kind regards,
Christian CollaertHello,
Perhaps the operating system is incorrectly powering down or shifting the wireless adapter to a low power state in order to improve run time while on battery?
Try going into the Device Manager (filename: DEVMGMT.MSC), locate the wireless adapter under the Network Adapters tree, view its Properties, and on the Power Management tab, disable (un-check) the Allow the computer to turn off this device to save power option.
Please let us know if that makes any difference (or not).
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Problem with file sender adapter and endSeparator
Hy,
have the following situation: with a sender File adpater i have to receive the same structure of data but in two mode.
1) First mode : each recorset is defined as a file line
Example (not fields separator):
fielda,fieldb,fieldc
field2a,field2b,field2c
2) Second mode : recorset of the same line without end
separator and fieldseparator
Example (not fields separator):
fielda,fieldb,fieldc,field2a,field2b,field2c,......
I configured the adapter as follow.
structure.fieldFixedLengths 1,2,3
structure.fieldNames field1,field2,field3
structure.lastFieldsOptional YES
structure.processFieldNames fromConfiguration
structure.endSeparator 'nl'
PROBLEM
Mode 1) works but mode 2) doesn't work.
Could anyone solve my problem??
Thank's
MatiHi,
Try using two differnt record structure name for each mode.for eg give it as structure1 and structure2.then u give the content conversion parameter for both the recordset depending on ur requirement i.e, with and without end seperator.
regards
jithesh -
Problem with Adobe Send Email functionality
I have come across an issue in Adobe Reader 9 where if a PDF doucment loads with an IE frame, and you click the 'Send Email' button, the subject line is blank.
Example URL: http://sc.openoffice.org/excelfileformat.pdf
On clicking the Send Email button -> Send Copy
Does anyone know a workaround to get the subject line populated?
In addition, with previous versions of Abode (6,7,8) the subject line defaults to the name of the PDF instead of the PDF title? Is there a way of changing this?
Any help would be most appreciated.I'm sorry to hear that you're having a problem with sending your files through Adobe Send. Can you provide more details?
What type of file are you sending?
When you download the file yourself, is it blank?
Are all recipients having the same problem?
Do the recipients get a Preview of the file?
Are they seeing the blank document as a Preview as well as after downloading?
Would it be possible for you to send the file to me through Adobe Send? I will provide you with my email address in a Private Message. -
Another problem with SOAP sender
I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
Scenario:
Soap Sender -> PI -> Soap Receiver
Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide. It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call).
Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\]. The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
Problem One:
The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types. XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
Problem Two:
I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send. In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
The other doGoogleSearch fields seem to be missing, i.e.
<part name="q" type="xsd:string" />
<part name="start" type="xsd:int" />
<part name="maxResults" type="xsd:int" />
<part name="filter" type="xsd:boolean" />
<part name="restrict" type="xsd:string" />
<part name="safeSearch" type="xsd:boolean" />
<part name="lr" type="xsd:string" />
<part name="ie" type="xsd:string" />
<part name="oe" type="xsd:string" />
Does anyone know why:
(1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
(2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
Thanks for any help with this.I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
Scenario:
Soap Sender -> PI -> Soap Receiver
Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide. It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call).
Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\]. The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
Problem One:
The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types. XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
Problem Two:
I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send. In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
The other doGoogleSearch fields seem to be missing, i.e.
<part name="q" type="xsd:string" />
<part name="start" type="xsd:int" />
<part name="maxResults" type="xsd:int" />
<part name="filter" type="xsd:boolean" />
<part name="restrict" type="xsd:string" />
<part name="safeSearch" type="xsd:boolean" />
<part name="lr" type="xsd:string" />
<part name="ie" type="xsd:string" />
<part name="oe" type="xsd:string" />
Does anyone know why:
(1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
(2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
Thanks for any help with this. -
Niggly problem with Hotmail - Sending from a third party email address
I need true push email on my BlackBerry, but also need access from a PC and need to send from my own email address. The easiest way I've found to do this is to forward all emails to my own address to a Hotmail address and use Hotmail as my main provider. Everything works as it should - I've got Windows Live Mail setup on my PC and all emails are sent to the BlackBerry the instant they're received. However, I've got a niggling problem with sending emails from the BlackBerry...
On the Hotmail website, I've set my own email address as the default "From" address and in Windows Live Mail, I've set my email address as my own address. So, if I send email from the Hotmail site or from Windows Live Mail, my own email address is used as the "From" address and not the Hotmail address. If I send email from the BlackBerry, it uses the Hotmail address as the "From" address and not my own address. I've set my own email address as the "Reply To" address in BlackBerry Internet Service but it still shows the Hotmail address. I can't see anyway to change this and it's the only problem I have...
I have tried the GoogleMail service, and this worked fine but every email I sent (either from Google Mail, Outlook or the BlackBerry) would copy itself to the BlackBerry and was getting a bit of a pain.
I have also tried Yahoo Mail but this wouldn't allow me to send email from another email address.
Any ideas from anyone? Either to allow emails sent from my BlackBerry to show my own email address as the "From" address, or to stop emails sent through Google Mail to copy themselves to the BlackBerry?clnock wrote:
I need true push email on my BlackBerry, but also need access from a PC and need to send from my own email address. The easiest way I've found to do this is to forward all emails to my own address to a Hotmail address and use Hotmail as my main provider. Everything works as it should - I've got Windows Live Mail setup on my PC and all emails are sent to the BlackBerry the instant they're received. However, I've got a niggling problem with sending emails from the BlackBerry...
On the Hotmail website, I've set my own email address as the default "From" address and in Windows Live Mail, I've set my email address as my own address. So, if I send email from the Hotmail site or from Windows Live Mail, my own email address is used as the "From" address and not the Hotmail address. If I send email from the BlackBerry, it uses the Hotmail address as the "From" address and not my own address. I've set my own email address as the "Reply To" address in BlackBerry Internet Service but it still shows the Hotmail address. I can't see anyway to change this and it's the only problem I have...
I have tried the GoogleMail service, and this worked fine but every email I sent (either from Google Mail, Outlook or the BlackBerry) would copy itself to the BlackBerry and was getting a bit of a pain.
I have also tried Yahoo Mail but this wouldn't allow me to send email from another email address.
Any ideas from anyone? Either to allow emails sent from my BlackBerry to show my own email address as the "From" address, or to stop emails sent through Google Mail to copy themselves to the BlackBerry?
Hi,
I've had this sent items in my inbox, problem with Gmail. You can add a filter from the settings page of your gmail account. The filter should be applied to all emails from your email address [[email protected]] and skip the Inbox should be selected.
Have you tested the "Reply to" option properly? Send a mail from your BB to a friend and ask them to hit the reply button, see which account it goes to.
===========================================================
If I've helped, please click the Kudos button.
If your issue has been resolved, please mark it as solved.
Joe
=========================================================== -
Problems with OWA_COOKIE send and get
Hi all,
I have a problem with OWA_COOKIE-package. What I'm trying to do is to integrate Oracle eBS and an APEX app. The application resides on different databases and servers.
I'm basing my code on this white paper:
http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
I have the function set up in eBS and it redirects me to my APEX login page. The next step is to pass a cookie with the user name password to the APEX app. Here the problems begins.
My launch code in the eBS database (lots of hardcoded values just for the test):
PROCEDURE xxapex_launch (application IN NUMBER DEFAULT 107
, page IN NUMBER DEFAULT 1
, request IN VARCHAR2 DEFAULT null
, item_names IN VARCHAR2 DEFAULT NULL
, item_values IN VARCHAR2 DEFAULT NULL) AS
BEGIN
OWA_UTIL.mime_header('text/html', false);
OWA_COOKIE.send (name => 'APEX_APPS_107',
value => 'daniel:development',
expires => sysdate + 365,
path=>'/');
OWA_UTIL.redirect_url('http://server:8090'||'/apex/f?p='||
application||':'||page||'::'||request||':::'||
item_names||':'||item_values);
END xxapex_launch;
The application process in APEX that should read the cookie(on-load before header):
DECLARE
c OWA_COOKIE.cookie;
a wwv_flow_global.vc_arr2;
BEGIN
c := OWA_COOKIE.get('APEX_APPS_107');
a := htmldb_util.string_to_table(c.vals(1));
:P160_USERNAME := a(1);
:P160_PASSWORD := a(2);
IF :P160_PASSWORD IS NOT NULL THEN
wwv_flow_custom_auth_std.login(
P_UNAME => :P160_USERNAME,
P_PASSWORD => :P160_PASSWORD,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':160');
__END IF;
END;The error I get is no-data-found when this is run:
:P160_USERNAME := a(1);
The c.num_vals is 0 and what I can understand OWA_COOKIE.get does not find my cookie. Is there anybody out there that can point on what I'm doing wrong?
Regards DanielBack on this....
Is there somebody that have successfully implemented the solution described in?
http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
Questions:
Should I create a custom login page or use the default (that using my custom Authentication Scheme)?
In the white paper where it's described on how to create the application process (that reads the cookie) it says (page 5):
"This process should be conditional and should not be run if the login page is processing a logout request."
Does somebody know on how to achive this?
In my case my eBS is on one server and the APEX installation is on another server, I don't know if that's
what preventing it to work.
I'm trying to make a very simple proof of conecpt, my app only contain one login page (the default) and
one blank HTML-page. I have a database link between my APEX and EBS database (using APPS user). My
app works fine in a stand-alone scenario. But when I start it from EBS I get the login page (the appl.
process code has not fired) and if I tries to login using a username and a pwd I can se that the
appl. process fires and is reading the cookie correctly. The problem is that it "hangs" and it seems that
appl. process fires over and over again (can see that in my log table).
My code:
The Authentication Function
create or replace FUNCTION demo_ebiz_suite_auth
(p_username in VARCHAR2,
p_password in VARCHAR2) return BOOLEAN is
begin
__return true; /* can log in with whatever */
end;
Application Process - On load: Before header (page template header)
DECLARE
__c OWA_COOKIE.cookie;
__a wwv_flow_global.vc_arr2;
BEGIN
__demo_toLog('APEX process', '1');
__c := OWA_COOKIE.get('APEX_APPS_'||:APP_ID);
__a := htmldb_util.string_to_table(c.vals(1));
__:P101_USERNAME := a(1);
__:P101_PASSWORD := a(2);
__demo_toLog('APEX process', ':P101_USERNAME '||:P101_USERNAME);
__demo_toLog('APEX process', ':P101_PASSWORD '||:P101_PASSWORD);
__demo_toLog('APEX process', ':APP_ID '||:APP_ID);
__IF :P101_PASSWORD IS NOT NULL THEN
____demo_toLog('APEX process', 'before trying to login');
____wwv_flow_custom_auth_std.login(
______P_UNAME => :P101_USERNAME,
______P_PASSWORD => :P101_PASSWORD,
______P_SESSION_ID => v('APP_SESSION'),
______P_FLOW_PAGE => :APP_ID||':1'
____demo_toLog('APEX process', 'after login');
__END IF;
EXCEPTION
__WHEN OTHERS THEN
____demo_toLog('APEX process', 'Fel: '||SQLERRM);
END;
Maybe I'm doing some simple misstake here but I can't see it. I need a second opinion.
Thanks.
/Daniel -
My recipients only get a blank page. I show file sent. This is with Adobe Send. Adobe Send Now had no problem.
I'm sorry to hear that you're having a problem with sending your files through Adobe Send. Can you provide more details?
What type of file are you sending?
When you download the file yourself, is it blank?
Are all recipients having the same problem?
Do the recipients get a Preview of the file?
Are they seeing the blank document as a Preview as well as after downloading?
Would it be possible for you to send the file to me through Adobe Send? I will provide you with my email address in a Private Message. -
Problems with automatically managing
So, I've been having a few problems with my new 30G 5g ipod, and I've gone through the usual to try and fix them. I've reinstalled all the software, restored my ipod, tried other USB ports, and have even gone as far as reformating my computer. Most of the problems I've been able to overcome. However, the problem I have now is that after I restore my ipod and I try to automatically update all my music, it won't. Itunes shows that songs are being uploaded, but after so many songs are uploaded (usually around 100 but has happend with less) it seems like the ipod looses its connection with my computer. After the connection is lost it reconnects, itunes sees it as hooked up again, and tries to start uploading again in this perpetual cycle.
So, that is my problem, but as it seems there are always make shift ways to fix things, and I've found one. I have accomplished getting all my songs onto my ipod (about 1000) by using the manually update songs, and transferring only a couple songs at a time.
So, I have a couple of questions:
First of all, is anybody having this problem with updating songs to their ipod?
Secondly, if you are, have you found any sort of fix?
Lastly, if nobody is having the same problem, my concern is now that I've got my ipod sort of working (via my make shift manual update) will I run into future problems (especially after waranty is up) and does this problem warant getting a new ipod from apple? Because let's be honest, it isn't working correctly.Does your computer meet the minimum requirements? If your using Win XP, not having service pack 1 and 2 can cause problems. Win 2k needs to have SP4. Any programs running in the back ground that might interfere with it? Not all USB ports are high powered, might try charging your iPod for 4 hours before transfering. Try disconnecting other USB devices, especially if they are some other form of storage device. Here's an article about the ipod discharging while transferring. Let us know what you find out.
http://docs.info.apple.com/article.html?artnum=93888 -
Problem with shareobject.send()
I have a problem with shareobject. the Send method does not work. I work with AS3
My code
Server :
application.onAppStart = function()
this.text_so = SharedObject.get("text_so", false);
application.onConnect = function(client)
this.acceptConnection(client);
this.text_so.send("MandarMensaje","OK");
Client:
text_so=SharedObject.getRemote("text_so",nc.uri,false);
text_so.connect(nc);
text_so.client=this;
text_so.MandarMensaje = function() {
trace('');
This code have a error , I need an example of function definition is executed from the server.Hi,
In your client side function you have not declared
text_so.MandarMensaje = function() {
trace('');
Here you have not declared an argument, while on the server side you are also sending an parameter "OK" with the function call SO.send("fnName","OK");
So you try replacing the client side definition as
text_so.MandarMensaje = function(info) {
trace(info);
If you still face problems, please revert back and also state the error you are getting. Also on the server side try checking the return value of the SO.send method to see if it returns true or false.
Thanks,
Abhishek -
I have problem with sms sending
i have problem with sms sending
First don't publish private information like the IMEI number. Second, why do you think people here can read your mind? If you have a problem then tell us something about the problem. We cannot guess at what your problem might be let alone offer a solution.
-
Problem with automatic creation of Universes on top of SAP BW - RKF
Hello
When I create Universes on top of SAP BW Querys everythings works fine, except for the Restricted Key Figures. The RKFs are created with the GUID code and not with the Description configured in the Query. I tried making the Key Figure Local and Global in the query without success. Does anyone know what's happening?
I'm using BO XI 3.1 SP2 with SAP BW 7.0.
AndréI created universes based on a BW Query in the following situations:
User specified username and password: language = PT - Dimension's name OK, RKF are GUID
User specified username and password: language = EN - Dimension's name OK, RFK are GUID
SSO: langue = PT or EN - Dimensions name are Ok and in English - RFK are GUID
I edited prefences of CMC to Portuguese. The same results.
The problem with the RKF still exists.
Is there some way resolve this problem? -
Sap4rails - Problem with automatic handling of data types under Windows
Hello all,
I've been trying to develop my own application using sap4rails library but whenever I call one of standard RFCs I always get strange results. Here is the piece of the code from my model which gets data from CURRENCY_LIST table:
require "sap4rails"
class App < SAP4Rails
@@funcs = [
'BAPI_CURRENCY_GETLIST',
# User defined instance methods here
attr_accessor :message
class << self
def getlist()
RAILS_DEFAULT_LOGGER.info("[App]#getlist ")
App.BAPI_CURRENCY_GETLIST.call()
return App.BAPI_CURRENCY_GETLIST.currency_list.rows()
end
end
here is the code from the controller
class AppController < ApplicationController
layout "standard-layout"
def index
list
render_action 'list'
end
def list
RAILS_DEFAULT_LOGGER.info("[LIST] action started...")
@currencies = App.getlist()
end
end
end the code from the view:
<html>
<head>
<title> Currencies </title>
</head>
<body>
<h1>Listing Currencies</h1>
<table border="1">
<tr>
<% @currencies.first.each_key {|key| %>
<th><%= key %></th>
<% } %>
</tr>
<% for currency in @currencies %>
<tr>
<% currency.each_value {|val| %>
<td><%= val %></td>
<% } %>
</tr>
<% end %>
</table>
</body>
</html>
As you can see everything is just simple. I run my application on the Windows XP OS and always get such result:
<html>
<head>
<title>Currencies and Exchange Rates: index</title>
</head>
<body>
<html>
<head>
<title> Currencies </title>
</head>
<body>
<h1>Listing Currencies</h1>
<table border="1">
<tr>
<th>VALID_TO</th>
<th>ALT_CURR</th>
<th>LONG_TEXT</th>
<th>CURRENCY_ISO</th>
<th>CURRENCY</th>
</tr>
<tr>
<td>oran peseta </td>
<td>231And</td>
<td> </td>
<td>099991</td>
<td>ADP ADP02</td>
</tr>
<tr>
<td>babwean Dollar </td>
<td>231Zim</td>
<td> </td>
<td>699991</td>
<td>ZWD ZWD71</td>
</tr>
</table>
</body>
</html>
It seems like there is sth wrong with mapping data types from R/3 to data types in Ruby. Does anyone has an idea what could be wrong? I would be very grateful for any help.
Best Regards
Michal M.First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]
Maybe you are looking for
-
Hello everyone, I hope someone can help me. I wanna copy my pictures to an external hard drive. Therefore I was trying to format my Seagate 1TB external drive (so it works with the Mac), but my Disk utilities is not working as it should (don't know w
-
Is Creative Cloud storage a good solution if multiple people have to work on a file?
I am trying to use Creative Cloud storage so that, for instance, a colleague can open an inDesign file from their own workstation, make some simple text edits, and re-save it. If everyone involved has desktop syncing, is this a workable way to use Cr
-
Well, I have an iPod Nano and it's not turning on. When I try to connect it, since I have to charge it. It won't work. It always turns off and on.
-
I am new to flash, I created a flash intro and saved it, when trying to reopen it to edit a crash iniates causing flash to close and leaving a crash report log on my desk top, why is this happening?
-
I need to get songs that are currently on an ipod onto my computer
I have a windows pc, I just formatted the harddrive. I expected that I could just copy all the songs from the ipod to the computer but that didn't work (some error) So how would I go about doing this? How would I get my songs back on my computer. I d