Problem with automatic table of contents Level headings

I am having trouble with the Table of contents in Adobe Indesign. When I create my automatic table of contents one of the Level headings that is supposed to appear under Chapter 1 instead appears under the Introduction heading. On the actual page where the heading paragraph styles have been defined the 2nd Level heading is as it should be underneath Chapter 1. So what I end up having to do is move them manually in the TOC. But I don’t want to have to do this and it would be great if Indesign instead did the automatic table of contents correctly.
I wonder if it has anything to with the fact that our template is set up with headings (that sit outside the body text to the left) as text boxes which we place inside the main body text box (they have anchored object settings on them so the heading sits off to the side). Whilst the anchored text box is exactly in the right sequence, maybe indesign senses and reads the anchored text box last?
I have an example of the file and the problem that is occurring in the pdf, it can be downloaded from:
Is there a solution to this? If anyone has any ideas I would be very grateful.

I've been playing with this for a while, and quite honestly I don't understand why it's doing things the way it is. It's working correctly on Page 11, which seems to me to have exactly the same structure, except for the subtitle. It also works correctly if I copy the frames from page 14 and paste into a new doc.
Things I tried that did not work: Export as .inx and move the pages to a new doc. You might try copying the text and pasting into a new doc.

Similar Messages

Problem with automatic table of contents in latest Pages 5.1

So here's the deal. I'm using "Bottom text" to automaticly put page numbers on each new page, But I don't want page number on the cover (page 1) or on the introduction page (p2), so I write something else in the bottom text there, and them simply click "start new bottom text here" on page nr 3 (the page where I have the table of contents). This way I get page numbers on all future pages but no on the two previous ones, but the problem then is that the headlines from earlier (the introduction) is left out from automatic table of contents. I tried experimenting, and if i chose "start new bottom text" on page 4 (the one after table of contents) all headlines from there on out disappears from table of contents. How do I fix this? The thesis I'm writing is going to be very long, and I really don't wanna have to do table of contents manually. I also can't have page numbers on the introduction page as this is a major exam thesis and it needs to look very professional and excellent, because my whole grade is depending on it.

An interesting bug, if that is what it is.
It could be you have simply chosen a Section T.O.C. which only does a T.O.C. for the section it is in.
Try adding the initial unnumbered pages as manual text before the T.O.C. starts.
Peter

Problem with book table of contents

Hi all
We are switching from 9.3 version to 11.1.2 . Generating a book pdf, happen a strange thing: the table of contents page is generate in the summary of acrobat, but it contains the first page of reports, so all the book pages result switched of 1 page respect the pdf index. Deleting a certain number of reports from the book the table of contents appears. Do you have idea what can cause the problem?
Thanks
Davide

There are some issues with 11.1.2.0 version with PDF output.Make sure that you have the latest patchset for FR.

Проблема с оглавлением/The problem with the table of contents

Добрый день, я использую Pages 5.5.2 и при создании оглавления у меня возникла проблема: Если поставить фильтр по заголовкам, а не использовать все, как предлагается в начале, то гиперссылки в нумерации обновлении сбиваются.
Например: Заголовок 1       страница 1
                   Заголовок 2       страница 2
                   Заголовок 3       страница 3
                   Заголовок 1       страница 4
                   Заголовок 2       страница 5
                   Заголовок 3       страница 6
                   Заголовок 1       страница 7
                   Заголовок 2       страница 8
                   Заголовок 3       страница 9
это изначальный вариант, требующий форматирования, так все работает, но если отфильтровать ненужные стили заголовков, то результат будет таким:
                   Заголовок 1       страница 1 - при нажатии отправляет на страницу 1
                 Заголовок 1       страница 4 - при нажатии отправляет на страницу 2
                   Заголовок 1       страница 9 - при нажатии отправляет на страницу 3
Скажите пожалуйста, как это исправить?
Please tell me how to fix it?

Courtesy of Google I can translate for you in hopes someone else will assist you, Nikita. There are many experienced Pages users here.
Hello, I use Pages 5.5.2 and when creating a table of contents I have a problem: If you put a filter on the title, and not to use everything as suggested in the beginning, the hyperlinks in the numbering update astray.
For example: Title 1 page 1
                    Heading 2, page 2
                    Heading 3 Page 3
                    Heading 1 Page 4
                    Heading 2, page 5
                    Title 3 Page 6
                    Heading 1 Page 7
                    Heading 2 Page 8
                    Heading 3 Page 9
this is the original version, which requires formatting, so it works, but if you filter out unneeded heading styles, the result will be:
                    Heading 1 Page 1 - when you send a page 1
                    Heading 1 Page 4 - when you send to the page 2
                    Heading 1 Page 9 - when you send a page 3
Please tell me how to fix it?

Problem with ePub Table of Contents

In converting to ePub format, I end up with the TOC out of sync. For instance chapter 1 in the TOC actually points to chapter 2, chapter 2 to 3, etc. When I make a PDF from the same file, everything is OK. Even in the Pages document the links work as expected. I have looked at the ePub file in the iPad, and other readers and in every instance the TOC is one chapter off.

I have converted serveral files using the ePub template and each one acts the same when I import them into my iPad - chapter 3 points to chapter 2, chapter 2 points to chapter 1, etc. I can upload the file. Should it be the Pages file or the ePub file? Also where do I upload the file?

Sections and Automatic Table of Contents

Hello there,
I have encountered a problem with InDesign while trying to make an automatic TOC for a journal I am working on. It has something to do with Sections.
So I have a book with several indd files. The very first indd file is called "frontpages" which includes the cover page, the inside cover, the leaf page, then two facing pages for the table of contents, then followed by the last page (Letter from the Editor).
This is followed by my second indd file called "newsbeats" which has 5 pages.
Now, what I wanted to do was mark the frontpages' page numbers using lower case roman numerals (i, ii, iii, etc.) Of course I do not want to include the cover page and the inside cover, so I want to start (i) with the leaf page, (ii) and (iii) marks the table of contents pages, and finally (iv) for the Editor's Letter. I did this by starting a section at the leaf page, START PAGE NUMBERNG AT: 1, and selecting the (i, ii, iii...) option. It worked, while leavingboth the cover page and and the inside cover with markers (a) and (b), which I previously set (because I do not know how to just get rid of the page number...)
Now, my book pages actually starts page (1) in the first page of the "newsbeats" document. So to do that, I made another section on the newsbeats first page, START PAGE NUMBERING AT: 1, and selected (1, 2, 3...). That works, too.
So at the moment, I have 3 sections to my page numbers: 1) the lower case letters (a, b) section for the cover page and inside cover, respectively; 2) the roman numerals section (i, ii, iii...) for the leafpage, table of contents, and Editor Letter; and lastly, 3) the arabic letters (1, 2, 3...) starting from the newsbeats document all the way to the last page of the last indd of my book.
Hope it is clear enough. Now here comes the problem:
When I try to create an automatic Table of Contents, it correctly finds my chapters (i used the style for each journal article's title) and lists them. The problem is, the page numbers do not appear correctly. Instead, it shows "a" on EACH AND EVERY table of contents ENTRY. I tried some trial and error, and found out that the pages shown (a bunch of "a") is actually the COVER PAGE'S (a) page number....
I tried for hours searching on topics like "Sections and Automatic TOC" or "How to selectively choose which pages to include in a TOC".. But I found none.
Your help would be really appreciated. I can easily manually type the page numbers (my journal only has 9 articles), but I wanted to do this in a very systematic way, so it would be a lot easier if in any case, there are more than 9 articles for next year's publication.
THANK YOU SO MUCH!
- Larry
PS: I attached a file showing the generated table of contents (on the ii-iii page that I wanted it to appear on), with the frontpages page panel, which shows the page numbering as well. Also I included the Book Panel, so you see how the pages are set up.

We definitely experienced the same issue. Seems like pages just get lost. This is the approach I took:
On the groups main page we just added a link called 'View All Articles' wrapped in a h1 tag (to make it very big and visible to the user) using the following url:
search/?q=%20
The resulting page will search for every article with a space in it and return the results. Still not the most elegant solution but it works. I'd like to implement it right into the xsl file but haven't found very much documentation to aid in this.

Problem with Pivot Table with Graph: Line Bar Combo

Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!

Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

Problem with switching tabs in top level navigation for Roles

Hi,
I've created two tabs (based on two roles) in the portal top level navigation menu. When clicking the first one it opens as it should. Then when clicking on the second tab it will not open, instead the first tab open up again, it sort of switches back automatically.These two roles are basically consists of worksets and iviews(accessing to r/3).
Does anyone have any expericene with this type of problem?
please suggest me
Thanks
Aravinda

Hi Aravinda
Please check this link
Re: Problem with switching tabs in top level navigation
Regards
Geogi

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Problems with a table in PDF`S footer

Dear sirs,
We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
We have no problems with the table included in the main body
In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
May you help us to solve our problem?
Thanks in advance your help.
Edited by: emgaitan on Mar 16, 2010 2:18 PM

Wardell,
Check the data in RSA3 for the extractor that you use to bring data .
You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
Let me know if you need anything else.
Thanks
Ravi Thothadri
[email protected]

Is it possible to save a PDF to always open with a table of contents

Hi
We have a large doccuemnt that we would like to send out with a table of contents on the left hand side so that people can jump to the topic/subject they are looking for without having to scroll through the doccument, we have a contents page with links to the relevant page number but we want the same option down the side so as they are reading the doccument they can click on a subject they way without having to back to to the first page or scrolling through, is this possible?

Thanks, we have the full version, how do we do this?
thanks
Laughton

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Problem with a table control

Hi gurus,
I´ve a problem with a table control. It has 3 columns which one is a checkbox.
I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
Thanks for all
Dani

Assign a function code to the checkbox column....
so when u check / uncheck any entry, PAI + PBO will be triggered....
In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
by looping at screen and setting screen-input = 0 for rest of the columns.
like ...
LOOP AT tc_itab
       WITH CONTROL tc_test
       CURSOR tc_test-current_line.
   module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
ENDLOOP.

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Problem with truncate table in procedure ora -00054

hi do anybody know where is mistake ???
the procedure has problem with truncate table
ora - 00054: resource busy and acquire with NOWAIT specified
ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
ora - 06512 at "POVAPSYS.POVAPSYS", line 6
ora - 06512 at line 1
this is my procedure....
AS
BEGIN
execute immediate 'TRUNCATE TABLE hman_t_max';
INSERT INTO hman_t_max SELECT * FROM hman_v_max;
COMMIT;
END;

2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
Gita,
I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
Cheers
Sarma.

Problem with automatic table of contents Level headings

Similar Messages

Maybe you are looking for