Problem with availability check due to credit block

Dear Experts,
I am facing a problem with availability check for a sales order which is blocked against credit check
Like, i have a open sales order with mulitiple line items around 10 line items, out of which all the 10 line items have unrestricted stock and got confirmed when availability check has been performed , but we could able to proceed through delivery and billing only for 9 line items. Hence there is 1 line item in the sales order which didn't get delivered. But when we tried to do the availability check the system is confirming the quantity with credit block. But after the sales order has been released thru VKM3 from credit block again the schedule lines are showing confirmed quantiy as "0" .
Credit message observed : " Credit check (maximum percentage for open exceeded)".
An earlier response would be of greater help extension to me , and i shall be greatly obliged to you all.
Thanks & Regards
Krishna.k

Hi,
once confirm actual stock is there for that line item if yes then may b stock blocked by Credit block.Release the stock reserved by credit blocked sales order through back order processing.
Tcode: V_RA
Select sale order want to change the confirmed qty. SAVE.
and again come to VA02 and run availablity chek.
Regards,
anand

Similar Messages

Problem with availability check

I'd be interested in FiOS but when I do an availability check, it says it's found multiple addresses that match what I entered, but none of them are mine! I've tried various ways of entering my address but always get the same result. Anyone else experiencing this? What can I do?

Too less information.
Search notes for "AVAILABILITY_CHECK", sort them by date and check if any notes apply to you. If you can´t find anything open an OSS call. ATP check can be configured in MANY ways.
Markus

Good issue from delivery not possible due to credit block

Hi gurus,
Please help me on this issue.while doing PGI for the delivery i am getting the following error message."Good issue from delivery not possible due to credit block "The simple credit check is assigned for the sales document type.iam doing free of charge delivery.
What are all the possible ways to get such error
Regards
Vis

but system behavior is not set in transaction OVA8, means combination of risk categories and 03 is not set.
I think you are checking the wrong risk category, please check once again the Risk category of the payer in FD32, what is it assigned and also check OVA8 with this risk category.
If you find the above settings are correct as per your observation, try to create a fresh cycle so that you will get the correct results as per your settings in delivery.
In your case what you are saying is correct, may be the risk category is changed recently this you can check the change log of the payer customer in FD32( if any change takes place).
If possible try to past the screen shot of both.
thanks,
srinu.

Cannot save order due to credit block V1849

In VA01, when I try to craete a sales order with Production order/ plan order , I get an information message saying that 'Subsequent function not possible due to credit block.'
It is going into the incomplete logs and requires to provide details for purchase order requistion. That however we cannot complete as credit limit is exceeded.
But as per requirement, the order should be saved even if the credit limit exceeds though the message pops up. the message number is V1849. Can you please tell me how to do that? The purchase order req should be created after release of credit limit.
Switching off credit control for this order type is no solution.
Thanks
Hein

We are also experiencing the same error message in system. The SAP Notes not recommended are not compatable in ECC. In our case the Sale Order is complete but when we try and make any changes it bring an error log which contains this message and when we try and save the documents it brings the below short Dump.
Error analysis
When changing or deleting one or more lines of the internal table
    "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL" or when inserting in the table
     "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL", 0 was used as
    the line index. An index less than or equal to zero is not
    allowed.
The error can occur when using the following options:
    1. "INDEX idx" for specifying the line number in the table
     "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL"
       where you want to change, insert or delete.
    2. "FROM idx" for specifying the start index when deleting a line
       area from or inserting a line area into the table
     "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL".
    3. "TO idx" for specifying the end index when deleting a line
       area from or inserting a line area into the table
     "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL".
At the time of the termination, the table contained 1 lines.

My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem.

My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem

The Ask Toolbar is causing that in the Firefox 3.6.13 version. Evidently something in that extension isn't compatible with a Firefox security fix. Disable that extension or un-install it.

Creation of Sale Order for configurable material with availability check.

Hi,
We have a scenario in which the material is configurable. The configurable material (X) has few variants (Ex: X1, X2, X3, X4, X5). While booking the sale order, we use the material number (X).
Further, the material planning is done for the variants X1, X2, X3, X4, X5. The standard variants are planned for production in advance.
1.     While booking the sale order, we want the availability check of the stock (type matching to happen). What needs to be done in configuration?
2.     While booking the sale order, there is a possibility that the configuration selected will not match with any of the standard variants due to some additional requirements of the optional features, in such cases how to link the standard variants to the sale order & create requirement for additional requirements.
Regards,
Umesh

Hi Umesh,
           1.Create material master for configurable material and variants in mm01.
           2.Maintain BOM for the configurable material in CS01
           3. Configur the variant configuration steps
              a. Create charecteristics T.code CT04
              b. Create values and assign classes
              c. assign the values to charecteristics
              d . Maitain dependence T.code CU01
              e.create configuration profile t.code CU41
              f.stimulate the configuration profile.
4. Do the availability check configuration through this path
IMG --> Sales and distribution > Basic functions ,> Availabilty check and Transfer of requirements.
5. Maintain the Availbility check field and MRP views in the material masters other wise you sit with PP people and do that
I hope it will help you
Regards,
Murali.

Problem with ATP check in release of process order

Hi gurus,
I have next problem in automatic release of process order:
No checking group is maintained for product 000000000791104015, plant VFMX in matl master.
Situation:
I've some materials without MRP views in material master data but apparently this doesn't affect to release order. In this case, this material hasn't this views and it's impossible to release the order. I'm supposing the problem is not related with the fill up of this views or the field in material master data, because for other materials with the same situation the release is running.
Anybody has any idea?
Thanks a lot,
Regards

Dear ,
You are facing this error because :
- you have activated avaialbility check, but checkingb group is not maintained in material master of the component
- if maintained in material master, in configuraion checking group and checking rule combination is not maintained
- if above both are maintained then in the checking control for the order type is maintained, but in the control you maintained the setting that - release not possible if no availability, hence change it to user control option.
*So Goto MM02- material master -MRP3 view -Maintain the Availability check field as 01/02 as applicable for components in the production *
For more clarification , you can investigate the below : For production order avilablity check and release u have should following settings.
1. Define checking Group - SPRO
2. Define checking Rule- SPRO.
3. Define scope of check - OPJJ - Scope of the avilabilty check is defined for the Combination of Checking group and Checking rule. Check contol is defined for each comination of checking group and checking rule.
4.Define Chek control -OPJK : Checking rule is linked to Ordertype/Plant combination.
while releasing the production order system will do avilability check as per the settings In OPJK for ordertype/plant combination.
Hope this is clear to you
Regards
JH
Edited by: Jiaul Haque on Jun 20, 2010 9:20 AM

Sales orders with availability check?

Is there any transaction code to generate list of sales order /open orders with respect to availability check ( with the combination of organizational data)?. will anyone share your expertise pl.

Have you tried with VA05 where you can see tabs like
- Open Order quantity (quantity not yet despatched),
- Confirmed Quantity
- Status of the order (Partially delivered, Being processed etc)
thanks
G. Lakshmipathi

Issue with availability check

Hi,
We are creating delivery for stock transfer order using customised transactions via ATP check. During ATP check, the system is indeed creating outbound delivery, but with zero quantity.
I checked the stock in MMBE, it is showing stock. Also in MB5B, the stock was available on posting date. Why the system, then created outbound delivery with zero quantity.
Can anyone please suggest?
Thanks in Advance,
Nisha

Hi Nisha,
Check the following
IMG>>MM>>Purchasing>>PO>>Setup STO>>Define Checking Rule and select the one you are using (Use avail check 02 with checking rule 01)
Next in Assign Delivery type and checking rule check for proper assignmnets for..
Doc Type-Supply Plant-Del Type-Chk rule-check box ticked for Shipment scheduling
Your delivery type should be NL for Intra company STO and NLCC for cross company STO.
Make the ATP check in the STO PO and confirm things working.
Chk n revert
Regards
Shiva

Problem with Spell check in text area

i have a item called text area with spell check. In that i have very large text. When i run spell check it open another windows and gives this message 'Checking spelling, please wait...' since last 4 hrs i have same windows.
Please help me out.
THanks,
Hetal Patel.

fruhulda wrote:
To the spell checker the word is wrong. It could be the word is right to the OP in this document but not in the next. Why should Pages learn the word?
It's not Pages which learn the document, it's the spell checker.
I wish I could help the OP. Pages on his machine isn't working as it should. Ignore option should take of the red line.
So, my machine is odd too.
When I click ignore, the spell checker no longer halt on the word but it continue to underline it.
As the OP didn't gave a sample we don't know what is the exact problem.
If he want to leave a misspelling in the doc, 'learn' is not a good soluce.
If he want to add a word to the list of allowed words, 'learn' is the soluce.
Yvan KOENIG (VALLAURIS, France) samedi 12 septembre 2009 10:44:33

TO BLACKBERRY- YOU HAVE A PROBLEM WITH BLACKBERRY WORLD NOT ACCEPTING CREDIT CARDS

HI, I AM AN OWNER OF A BLACKBERRY Q10 AND A LOYAL BLACKBERRY USER SINCE THE 8800 SERIES BLACKBERRY CURVES. THERE IS SOME TYPE OF PROBLEM WITH BLACKBERRY WORLD. I AM CURRENTLY RUNNING 10.3.2.556. UNTIL LAST THURSDAY BLACKBERRY APP WORLD WORKED WITH MY CREDIT CARD. THEN ALL OF A SUDDEN IT JUST STOPPED. SAYING THAT THERE WAS A PROBLEM WITH THE TRANSACTION AND TO TRY AGAIN LATER. NOW I CANNOT USE MY CREDIT CARD AT ALL. I AM POSTING THIS IN MULTIPLE FORUM BECAUSE I AM NOT THE ONLY ONE HAVING THIS ISSUE. I HAVE RECENTLY POSTED THIS PROBLEM ON CRACKBERRY.COM AND OTHERS ARE HAVING THE SAME PROBLEM. http://forums.crackberry.com/ask-question-f432/why-blackberry-world-will-not-let-me-purchase-apps-when-working-before-1032609/?mn_qa=1#post11839564 AND IF YOU LOOK ON THIS SITE AND CRACKBERRY FURTHER YOU WILL SEE OTHERS ARE HAVING SIMILAR ISSUES. I HAVE ALREADY TRIED TO GO ONTO THE BLACKBERRY APP SITE ON MY COMPUTER BUT NOW THERE IS NO OPTION TO CHANGE THE PAYMENT OPTIONS THERE ANY MORE. WHAT IS THIS. WHY IS IT HAPPENING?????? CAN YOU PLEASE LOOK INTO THIS PLEASE WHOMEVER FROM BLACKBERRY SEES THIS POST. SINCE THERE IS NO NUMBER TO CALL FOR HELP ABOUT THIS I AM POSTING HERE UNTIL SOME TYPE OF BLACKBERRY PERSON ANWERS. I AM ALSO GOING TO TRY AND POST THIS IN THE FORUMS FOR Q10, CLASSIC, PASSPORT, LEAP, ETC., SO SOMEBODY CAN HELP US. SOME PEOPLE SAY IT HAS BEEN GOING ON FOR MONTHS ON THEIR ACCOUNT AND NOTHING HAS BEEN DONE. HELP US PLEASE. THANK YOU.

I have the same problem today. Suddenly Appworld stopped accepting my AMEX credit card. I called AMEX and they told me that all is notmal from their sied and that they did authorize transactions. However, Approwld says that credit card cannot be accepted. WHAT A MESS!!! And there is NO EMAIL or phone number to contact regarding this problem which is quite RIDICULOUS !!!

Is anyone else having problems with Sound Check playing tracks at the wrong volume in Album view?

I have noticed in the last few weeks that when I play an album on iTunes, some of the tracks are played at a lower volume. I am using sound check, and when I play the tracks individually from the "Songs" view they all play at the correct volume. However, when i choose album view, some of the same tracks are played at a lower volume. I have rang the support line and they couldn't tell me why this is happening. Has anybody else had this happen to them, and does anyone know a way round this?

I have problems with many of the same issues you mention with zoom on iOS8. Its not entirely clear if this is intended functionality or a number of bugs. The setting for full screen view versus window/regional view seems to not apply globally, which is insanely frustrating. Window view pops up without warning, particularly in a keyboard pop-up event.
I don't particularly liek the popup menu either, but now I HAVE to use it to constantly change from the sudden change to window focus to full screen zoom.
Some of the new filter features are nice additions, but don't seem to work well. or be performance optimized. Low-light, for example, stutters on zooming.
I would also assert that zooming in and out seems more abrubpt and less accurate.
iOS8 is definitely a decrease in usability and performance from its predecessors. Apple, please work out the bugs and get this right!

Urgent! Problem with authority-check

Hi all,
I encounter some wierd scenario with authority-check.
I try to run IW41 (create order confirmation) and the following authority-check
AUTHORITY-CHECK OBJECT 'C_AFKO_ATY'
       ID 'ACTVT' FIELD TMP_ACTVT
       ID 'AUTYP' FIELD ACT_AUTYP.
IF NOT SY-SUBRC IS INITIAL.
    MESSAGE E124 WITH SY-TCODE RAISING MISSING_AUTHORITY.
ENDIF.
was successful. However, when i try to run the FM CO_RI_CONFIRMATION_CREATE (use to create order confirmation), the exact same code is run and when i reach the above authority-check, it fails even if all the variable passed to the check is the same.
How can this happen? I need some help. Very urgent.

Hi Mil,
Check the values of TMP_ACTVT and ACT_AUTYP for both the cases.
May be they are different.
Reward points if useful.
Regards,
Atish

Problem in availability check

Hi guys,
WE have the following requirement. At the time of creation of production order, we have to activate the availability check before save. We could configure such a way that, availability check is carried out while releasing the production order. But if the quantity is increased after release, the order is getting saved without carrying out the availability check. WE have to do either of the following two:
1) making quantity field as not editable after releasing the production order or
2) to enable availability check to be carried out after release and before saving the order.
Is it possible to do the above? If possible, what are the settings required.
Suggestions will be rewarded.
chintu

Hi,
Availability check for a material is carried out only if the material is
1. A stock item
2. Not a phantom item
3. Not a bulk material.
This can be carried out
1. during order creation
2. during order release
3. when a created order is saved
Availability check can be triggered either manually or automatically.
For this we need to define in checking control(opjk)
First define a checking group(ovz2) and checking rule and this
must be assigned to checking scope.(opjj)
In the checking scope(opjj) we should define
1. which Mrp elements are to be considered during check
2. which inventory categories are to be taken into account
3. whether Replinishment lead time is to be taken into account or not
4. whether check is also to be carried at storage location level.
This checking rule must be linked to checking control(opjk)in which you can say
1.No availability check for the material
2.Availability check when saving the order
3.What type of check is to be carried
whether ATP CHECK or Check against PIR quantities
4. Whether order should be released or not if there is
any missing parts.
For all your questions there is answer available in this answer.only
you have to customise things in such a way that your requirement are met.
To my knowledge a phantom material should not take part in check
If it takes part in availability check , check whether the phantom assembly
is allowed to take part in availability check in Define Explosion Types in
customising.The indicator switchoff phantom assembly (02)must be active and
this must be assigned in Bom item detail screen under general data.
Reward points if helpful
Regards,
nandha

Problem with document going back into credit check

Hi Gurus,
I have a scenario where the document that is released from credit check is coming back into credit check before the stipulated time.
Further information:
1. OVA8 for the particular credit control area and risk category has the settings as follows:
        a. Released documents are still unchecked: Deviation is blank and number of days = 30
        b. Checks: Static credit check is enabled and includes open orders and open deliveries, Max.doc.value, number of days
             are blank,
2. Value of the document is not increased and the dates are not advanced however there is a open delivery and the value of the SO + Open delivery would increase the Limit set for the customer..
But my question is once the SO is released through VKM3 why is it coming back into static credit check.. Request your inputs.
regards
Joseph

Hi Arun,
CHECK_CM program had thrown up one message that i need to check for the infostructures 0066 and 0067 in the transaction code MCVR and there the message it shows both these infostructures is that there is no updating!! by the way update group is 12. Am i missing something here?
As suggested by you i checked up the change document status wherein it shows that the requested delivery date & billing date have been changed and that time matches the time at which the SO went back into the credit check...The question that lingers on is why did it get into credit check and the details are as follows:
Document creation date: 21.09.2010,
Date of moving into credit check 1st time: 21.09.2010
Date of release of credit check: 27.09.2010 @ around 10.35am
Date of changes to the dates: 27.09.2010 @ 11.35 am
Date on which document came back into credit check: 27.09.2010 @11.35 am
In OVA8 it is configured as " 30 days" under released documents are still unchecked and since no changes were made to the invoice value, critical fields, next review date are not checked.. the document should've come into credit check on 27.10.2010.. Pls suggest.
Thanks
Joseph

Problem with availability check due to credit block

Similar Messages

Maybe you are looking for