Problem with B2C web shop(not opening)

Hi all,
Trying to open B2C web shop, getting run time errors.Infact did all the necessary XCM and CRM gui config settings.Role i have assigned here is SAP_CRM_ECO_ISA_WU_B2C.Even the product catalog replication was succesful.
what could be the possible reasons for the above issue?
Regards,
PV.

Hi ALL, my problem is resolved.
the user password in jco setting is wrong and when i corrected that. the error went off.
So try to test run the applications where ever possible before accessing it.
Priya

Similar Messages

10.3.9 problems with FTP server - port not open?

I have set up the ftp server in MacOSX Server 10.3.9 and I think the configuration is correct, but I am unable to access it from a client. When I check the open ports on the server from the client (running 10.4.10), ports 20 and 21 are not open, even though the firewall is not running. How do I open these ports, or start the server listening on them? The FTP server is running as far as Server Admin is concerned, although I have to say that I can't see a process in Activity Monitor with ftp in its name.

I think I might have got a bit farther with this problem, but this just gets me nearer to the problem, not to a solution.
When I stop the ftp service I get an error message in the console that says:
server servermgr_ftp: ftp config:Error:Unable to hup xinetd - pid file shows pid='(null)'
I believe that this means that Server Admin has tried to get xinetd to read its config file but since xinetd is not running (and hence no pid is available) it is unable to do this.
If I try and start xinetd from the terminal I get the following error message:
server xinetd[5484]: bind failed (Permission denied (errno = 13)). service = ftp
server xinetd[5484]: 5484 {init_services} no services. Exiting...
I now know that xinetd is the process that (amongst other things) listens on port 20-21 for an attempt to establish an ftp session and then launches ftpd to service that connection. At least I think that is how it works! Or should work...

What is your email address so I can email you my problem. It will not go thru in Firefox. I am using IE to contact you to explain a problem with my HughesNet webmail not opening. Please respond so I can send an email to you thru IE. Thank you M Barry

I use Mozilla Firefox almost exclusively. Yesterday morning I logged onto my HughesNet WebMail as usual and it downloaded, I could move items to inbox folders but I could not open any mail. Not in the inbox, the sent box, spam or trash. I do not use any other auxiliary mail box...just my webmail.
I tried periodically during the day yesterday and nothing happened...could not open anything.
I went over to IE and it opened everything fine.
I notified HughesNet of the problem and they replied that I should report it to you as the problem is probably on your side.
Appreciate your reply and fix.
Thank you ...Mary Barry
http://webmail.hughes.net/mail
I tried to report this on the hughes site on your trouble page and it never went thru.

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

OS X Mavericks, problems with all apps, can not open App Store, messages, contacts, face time etc... only safari, iTunes, mail can be opened....

Can not open App Store, messages, contacts, face time, contacts, photo booth etc... only safari, iTunes, mail can be opened.... help me.

Lanny here are the startup key sequences on wired keyboards to know for future reference:
SHIFT - safe boot.
command-S single user mode to run fsck
command-R to run a recovery boot.
command-option-P-R to reset the PRAM on Macs younger than 4 years, or whose PRAM battery is younger.
command-option-O-F to boot into open firmware.
D key to boot hardware test on an Intel Mac - for pre-July 20, 2011 Macs, this means having the original installer discs.
Option key - Startup Manager.
Option = Alt key on Windows keyboards.
Command key may be Windows key on Windows keyboards, or cloverleaf or Apple logo key on Apple keyboards.
Other startup sequences are here:
http://support.apple.com/kb/ht1533

Error while opening the B2C Web Shop

Hi All,
Our Basis team has installed the JAVA Stack for CRM 7.0 EHP1. We can successfully open the XCM page for the web shop using the following URL: http://host:port/b2c/admin/xcm/init.do.
We get a SAP E-Commerce Error page when we try to launch the B2C Web Shop using the following URL:
http://host:port/b2c/b2c/init.do. The following error messages are shown along with a "Log On" button:
An application error occurred
A serious system error has occurred
The shoplist read from buffer is empty
Contact the administrator
Log on
I have created the Internet B2C Users& specific roles and also done the XCM Configurations (New customer configuration, General Settings & JCO Component created). Restarted the Java Application. However we still get the same error page while launching the web shop. Please help us to rectify this error.
Also I get a blank-white page when I try to open this URL for maintaining a B2C Shop: http://host:port/shopadmin/shopadmin/init.do?configuration.xcm=Z_MY_SCENARIO
I can successfully open the URL for SHOPADMIN XCM: http://host:port/shopadmin/admin/xcm/init.do
Please help us to resolve the issue. How can we maintain the SHOP? Have we missed some configurations?
Thanks !

I am not able to open the shopadmin URL for defining a new B2C web shop. This URL does not work : http://host:port/shopadmin/shopadmin/init.do?configuration.xcm=ZMY_SCENARIO. I just get a white blank page.
I can open the XCM for shopadmin using teh URL: http://host:port/shopadmin/admin/xcm/init.do.
Thanks.

Hi, I have a Macbook Air 13 "and I have a problem with it starting when I open it and the logo appears below a cerculer that spins and nothing else. Still not opening up

Hi, I have a Macbook Air 13 "and I have a problem with it starting when I open it and the logo appears below a cerculer that spins and nothing else. Still not opening up

Hi aysha13
Do check the article provided by BGreg. If it's not a h/w issue, you will be able to resolve it.
Good Karma.
Holydevil.

Pricing Totals not appearing in B2C web shop

Hello All,
We are using list prices in product catalog and in B2C web shop.
We are unable to see the pricing totals in the save order screen.The pricing totals and prices are appearing in in the back end(SAP GUI).
Could any one suggest where do we have to make the necessary settings?
Thanks in advance,
Sastri

Dear Yanamandra,
If you are using list price your gross total also will be the same as list price.
And for this you have to switch off the IPC in XCM settings and have to replicate the catalog properly in TREX server.
Otherwise if you are using a customer pricing procedure to calculate the prices and there are other additional prices which have to be added to the list price at the time of pricing.
Then you should activate the IPC and also your VMC should be active in the CRM s/m, and also if you are using any customized user exit that also should be implemented.
hope this clarifies your doubt.
Thanks and Regards
shanto aloor

Interaction Center Mode functionality in B2C Web shop

Hi,
We have a requirement in which sales rep of a company will pre-populate a shopping cart for the customer in B2C Web shop. Later customer can order that shopping cart.
We are trying to achieve this requirement through Call/Interaction Center Mode functionality.
If anybody has worked on this functionality before or has any idea, please share.
Regards, Vipul Kumar.
Edited by: vipul_kumar02 on May 27, 2011 12:11 PM

Hi,
I have configured the call center mode functionality in spro (Customer Relationship Management -> Web Channel -> Basic Settings -> Activate Links from CRM WebClient UI to Web Channel Applications -> Start Web Shop in Interaction Center Mode) with the help of information given on help.sap.com.
Now I can see B2C Web shop link on Web UI. The problem when I click on the link it's working if the URL in the backend is of google.com but not working for B2C Web shop. I think the problem is with the role assigned to the user.
If anybody has any idea, please share.
Regards, Vipul Kumar

Products in b2c web shop

Hi
I am busy implementing a b2c web shop and and facing a problem that I hope someone can help me with.
My client has an established SAP ECC6 backend system running SAP retail. They create articles in ECC using transaction MM41. One article represents a product that can have multiple GTIN and units of measure for different pack sizes. When we replicate the products to CRM the product is created with the same article number, GTINs and units of measure.
e.g. 1 can of cola (EA), 6 pack of cola (CK), and 24 case of cola (CS) is 1 article with 3 GTIN.
I need to represent each GTIN as a separate product on the web shop although we only have 1 product in CRM. Is this possible?
Regards
Karl
PS. Please let ne know even if it is not possible.
Edited by: Karl Tilling on Jul 20, 2011 11:14 AM
Edited by: Karl Tilling on Aug 3, 2011 3:46 PM
Edited by: Karl Tilling on Aug 3, 2011 3:48 PM

A GTIN is assigned to the product together with a unit of measure. As more than one unit of measure can be specified for a product, this means a product can have more than one GTIN.
During an initial or delta download, EANs can be transferred from SAP ECC to SAP CRM as follows:
(1) Only the EANs corresponding to the EAN/UCC-8, UCC-12, EAN/UCC-13, and EAN/UCC-14 standards can be transferred from SAP ECC.
(2) As more than one EAN can be assigned to a material in SAP ECC per unit of measure but only one GTIN per unit of measure in the product master in SAP CRM, only the EAN with the Main EAN indicator is transferred.
So, 1 product with 3 UoM is what you will get.

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

? Some pdf files from the web will not open, some will.

Some pdf files from the web will not open, some will. I am using Adobe Reader 10.0.1 on an 8-year old puter I have just upgraded to 2G of RAM. It worked fine before with 256K. When a file won't open I get error message "There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again (103:103). Have uninstalled and reinstalled all Adobe products several times. Ideas?

Good luck with that. Adobe10.0.1 is a bug infested BAD program. Look at the posts relating to this issue for the last 3 days. Many, many problems. Support is no help.

Safari problems with certain web pages dowloading a page instead of display

on some sites when i click a link to go to or open a page, it downloads the link. this happens with ebay for example where when i click on a link, it downloads ebay.dll instead (i know, weird). and now, ebay.com isnt even opening - i just get a blank page. it happens with .asp pages and .js pages too. everything seems to work fine in firefox. i was also having problems with gmail which would not allow me to click on links and if i typed, it would jump to another field on the screen if i typed a non-alpha character (i know, weird). that seems to be fixed now and i can use gmail.
not sure what the problem is. any ideas?

You would have to remove (uninstall) or reinstall the Georgia font if it is currently corrupted.
You can use the System File Checker to check for missing and corrupted font files.
It needs to be run from an Elevated Command Prompt.
Open a cmd.exe window as Administrator:
Start, click Programs, click Accessories
Right-click Command Prompt, and choose "Run as administrator"
Click past the UAC Screen
After the cmd.exe prompt, type: sfc.exe /scannow and press Enter
* http://windowsforum.com/threads/system-file-checker-a-great-windows-fix-tool.19250/

Problem with RESTful web service

I am running into a problem with Flex Web Services (REST) in trying to get the proper format returned. I can see that the HTTP header is set to
Accept: */*;
rather than
Accept: application/xml
when sending the request. The web service was generated via the web services HTTP data services wizard. I edited it to set the resultFormat to xml
    // Constructor
    public function _Super_UsersService()
        // initialize service control
        _serviceControl = new mx.rpc.http.HTTPMultiService();
         var operations:Array = new Array();
         var operation:mx.rpc.http.Operation;
         var argsArray:Array;
         operation = new mx.rpc.http.Operation(null, "getUsers");
         operation.url = "http://localhost:8888/users";
         operation.contentType = "";
         operation.method = "GET";
         operation.resultFormat = "xml";
         //operation.serializationFilter = serializer0;
         operation.properties = new Object();
         operation.properties["xPath"] = "/";
         operation.resultType = valueObjects.Users;
         operations.push(operation);
         _serviceControl.operationList = operations;
         model_internal::initialize();
How does one configure the accept header?

Hi,
I have posted a simple application with the RESTful reference:
http://apex.oracle.com/pls/apex/f?p=13758
I can give you full privileges on this so you can look at the WEB service reference. Shall I send to you separately for login user?
It is using the RESTful service: http://apex.oracle.com/pls/apex/nd_pat_miller/demo/employee/{deptno}
This RESTful service tests fine when I test from within the RESTful web service module of the Workspace.
I based this on the Video demo tutorial for RESTful web service that Oracle published for 4.2 release. The video seemed to exclude the {deptno} in the URL but when I try that, it doesn't work either.
This is the error I am getting when I run this on my Apex environment: (it, of course, will not run the web service in the apex.oracle.com environment)
class="statusMessage">Bad Request</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons"><li class="badRequestReason"><span class="target" style="display:none;">uri</span><span class="reason">Request path contains unbound parameters: deptno</span></li>
</ul>Thanks,
Pat
Edited by: patfmnd on May 8, 2013 3:33 AM

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004 Please help me in solving this problem.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.

Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol).

Firefox is having problems with certain web sites, but IE is ok

Top of page is present in IE but not in latest Firefox.

Is it a safe assumption that website is your's? <br />
What difference does it make which browser '''''you''''' use? Isn't your website for client's or potential clients?
That said, I don't have a problem with that web page on Firefox 2.0.0.20, 3.0.19, 3.5.16, 3.6.13, or the 4.0b9 nightly - it looks the same as in IE8 on 32-bit WinXP SP3, with an AMD 64-bit processor.
The problem shown in your screenshot is with your own Firefox installation. It's like all the "styling" is turned off.
''''' "I infer Firefox needs a 64 bit version." ''''' <br />
What good is a 64-bit browser without 64-bit plugins? <br />
Adobe still hasn't released a 64-bit version of Flash, although they do have a "preview" version available. <br />
http://kb2.adobe.com/cps/000/6b3af6c9.html
''BTW, Mozilla does have a Windows 64-bit version of the Firefox 4.0 betas that is being tested now, but it is not going to be released in Jan / Feb when Firefox 4.0 is released. It will probably be released later in 2011 with one of the 4.# versions, I suspect right after Adobe has a 64-bit Flash release version.''

Problem with B2C web shop(not opening)

Similar Messages

Maybe you are looking for