Problem with BAPI_DOCUMENT_CHECKOUTVIEW2 while calling using JCO of XMII

Hi DMS Gurus,
The above FM is successfully executing and creating a local copy in temp folder of where the FM running using SAP GUI.
But when i call using jco,i am getting some problems.
1. If i execute the FM with default values for http dest and ftp dest, i am getting error saying << c:\temp\....file could not be created.
2. When i changed the HTTP destination to <<SAPHTTPA>, it is executing fm successfully but dont know in which system the file is downloaded.
My client application or xMII server ( where jco service is running ) or ABAP server.
I checked in the first 2,i didn't find.
SAP GUI is not installed in xMII server.
But my requirement is to download to the physical server of xMII ( jco ).
Is this any thing to do with creating http destinations??
If that is the case, can any body help me in creating http destinations..
and i heard something about SAPFTP.EXE ,is that should be some where in client or any servers??
Please help me.
Thanks
Vansi

Vamsi,
As I mentioned in this forum thread, bapi_document_checkoutview2. You have to use the POST action in BLS to communicate with the HTTP Interface of Content Mgmt. directly. The only other alternative is to write your own BAPI to retrieve the content and send it back to xMII via the JCo action (Hint: The data will be base64 encoded and can be saved to the filesystem via the Image Saver action even though it is not an image).
Sam

Similar Messages

Problem with BAPI_DOCUMENT_CHECKOUTVIEW2 while calling using JCO

Hi DMS Gurus,
The above FM is successfully executing and creating a local copy in temp folder of where the FM running using SAP GUI.
But when i call using jco,i am getting some problems.
1. If i execute the FM with default values for http dest and ftp dest, i am getting error saying << c:\temp\....file could not be created.
2. When i changed the HTTP destination to <<SAPHTTPA>, it is executing fm successfully but dont know in which system the file is downloaded.
My client application or xMII server ( where jco service is running ) or ABAP server.
I checked in the first 2,i didn't find.
SAP GUI is not installed in xMII server.
But my requirement is to download to the physical server of xMII ( jco ).
Is this any thing to do with creating http destinations??
If that is the case, can any body help me in creating http destinations..
and i heard something about SAPFTP.EXE ,is that should be some where in client or any servers??
Please help me.
Thanks
Vansi

Vamsi,
As I mentioned in this forum thread, bapi_document_checkoutview2. You have to use the POST action in BLS to communicate with the HTTP Interface of Content Mgmt. directly. The only other alternative is to write your own BAPI to retrieve the content and send it back to xMII via the JCo action (Hint: The data will be base64 encoded and can be saved to the filesystem via the Image Saver action even though it is not an image).
Sam

Problem with BAPI_DOCUEMENT_CHECKOUTVIEW2 while caliing using JCO

Hi DMS Gurus,
The above FM is successfully executing and creating a local copy in temp folder of where the FM running using SAP GUI.
But when i call using jco,i am getting some problems.
1. If i execute the FM with default values for http dest and ftp dest, i am getting error saying << c:\temp\....file could not be created.
2. When i changed the HTTP destination to <<SAPHTTPA>, it is executing fm successfully but dont know in which system the file is downloaded.
My client application or xMII server ( where jco service is running ) or ABAP server.
I checked in the first 2,i didn't find.
SAP GUI is not installed in xMII server.
But my requirement is to download to the physical server of xMII ( jco ).
Is this any thing to do with creating http destinations??
If that is the case, can any body help me in creating http destinations..
and i heard something about SAPFTP.EXE ,is that should be some where in client or any servers??
Please help me.
Thanks
Vansi

Vamsi,
As I mentioned in this forum thread, bapi_document_checkoutview2. You have to use the POST action in BLS to communicate with the HTTP Interface of Content Mgmt. directly. The only other alternative is to write your own BAPI to retrieve the content and send it back to xMII via the JCo action (Hint: The data will be base64 encoded and can be saved to the filesystem via the Image Saver action even though it is not an image).
Sam

Problem calling BAPI_document_checkoutview2 using JCO of xMII

Hi DMS Gurus,
The above FM is successfully executing and creating a local copy in temp folder of where the FM running using SAP GUI.
But when i call using jco,i am getting some problems.
1. If i execute the FM with default values for http dest and ftp dest, i am getting error saying << c:\temp\....file could not be created.
2. When i changed the HTTP destination to <<SAPHTTPA>, it is executing fm successfully but dont know in which system the file is downloaded.
My client application or xMII server ( where jco service is running ) or ABAP server.
I checked in the first 2,i didn't find.
SAP GUI is not installed in xMII server.
But my requirement is to download to the physical server of xMII ( jco ).
Is this any thing to do with creating http destinations??
If that is the case, can any body help me in creating http destinations..
and i heard something about SAPFTP.EXE ,is that should be some where in client or any servers??
Please help me.
Thanks
Vansi

Hi Vansi,
that's correct. BAPIs always require a SAPGUI connection. Therefore I would recommend you to use API function modules instead, because they are more flexible and better to use for background processing. Please see SAP note <a href="https://service.sap.com/sap/support/notes/504692">504692</a>
which contains also some sample programs for these API modules.
Best regards,
Christoph

Compilation problem with templates while using option -m64

Hi,
I have compilation problem with template while using option -m64.
No problem while using option -m32.
@ uname -a
SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
$ CC -V
CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
Here is some C++ program
############# foo5.cpp #############
template <typename T, T N, unsigned long S = sizeof(T) * 8>
struct static_number_of_ones
static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
template <typename T, T N>
struct static_number_of_ones<T, N, 0>
static const T m_value = N;
static const unsigned long m_count = 0;
template <typename T, T N>
struct static_is_power_of_2
static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
template <unsigned long N>
struct static_number_is_power_of_2
static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
int main(int argc)
int ret = 0;
if (argc > 1)
ret += static_is_power_of_2<unsigned short, 16>::m_result;
ret += static_is_power_of_2<unsigned int, 16>::m_result;
ret += static_is_power_of_2<unsigned long, 16>::m_result;
ret += static_number_is_power_of_2<16>::m_result;
else
ret += static_is_power_of_2<unsigned short, 17>::m_result;
ret += static_is_power_of_2<unsigned int, 17>::m_result;
ret += static_is_power_of_2<unsigned long, 17>::m_result;
ret += static_number_is_power_of_2<17>::m_result;
return ret;
Compiation:
@ CC -m32 foo5.cpp
// No problem
@ CC -m64 foo5.cpp
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
"foo5.cpp", line 36: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
"foo5.cpp", line 37: Where: Specialized in non-template code.
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
"foo5.cpp", line 43: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
"foo5.cpp", line 44: Where: Specialized in non-template code.
4 Error(s) detected.
Predefined macro:
@ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
@ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
@ diff log32 log64
7c7
< #define __TIME__ "09:24:58"
#define __TIME__ "09:25:38"20c20
< #define __sparcv8plus 1
#define __sparcv9 1[snipped]
=========================
What is wrong?
Thanks,
Alex Vinokur

Bug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
Otherwise, you can check for new patches from time to time at
[http://developers.sun.com/sunstudio/downloads/patches/]
and see whether this bug is listed as fixed.

Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

Having problem with siri on calling someone

Hi.. i'm having a problem with siri when calling someone..it says " i can't call using that number "
Im from Mauritius, our mobile number having been migrated into 8-digits since 1 month. I'd turn off siri, reset setting.. its the same!
whats wrong with that?

i"m from Mauritius also having the same problem when calling someone using siri.
i think its because, of the 8 digits number.

Problems with a VBA Userform using Multipage (2) and DTPicker.

Hi
Problems with a VBA Userform using Multipage (2) and DTPicker (4)
On Page1 I've got 2 DTPicker, one for the date and the second for the time.
Same thing on Page 2.
Problem:
Only one set will work, if I close the Userform with" MultiPage"on page2, only that set will work.
Same thing if I close on Page 1 then just the set on Page 1 will work.
As anyone seen this problem and any work around you may think would help.
I'm using Windows 7 , Ms Office Pro. 2003
same problem on Windows Vista , XL2003
Cimjet

There are a number of issues relating to the way that date pickers are handled, but the most important is that their output is text. In order to get the values into Excel, you need to format the Excel columns as Date and Custom (time format) and convert
the output to the worksheet from text to date values.
Date pickers also display a few anomalies on multi-page forms, so you need a belt and braces approach. Personally I would put the code to call the form and enter the values in a standard module (as now in the example) and use a belt and braces approach to
maintaining the format.
I think you will find the example now works.
Revised Example
Graham Mayor - Word MVP
www.gmayor.com

Problems with 3-way calls, merge calls?

loving my iPhone but having problems with 3-way calling and merging calls. tried to be on one call and have another person call (from a regular land line) and it went straight to voicemail for them. in addition, was on a regular call and tried to add another call AND tried to merge, none of the above has worked. i know this is included in the calling plan.
anyone having similar problems?

Per the Apple note in the link below, "Note: While iPhone is actively transferring data over EDGE—downloading a webpage, for example—you may not be able to receive calls. Incoming calls may go to voicemail."
Perhaps this is what was happening.
http://docs.info.apple.com/article.html?artnum=305711

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

Problems with a shared calendar using Outlook 2007 and Exchange 2010

Hello all,
We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
I realize this is a big mess, and your help would be greatly appreciated.

Hi Nigel,
How is the impact, just one user or all users, Outlook or OWA?
If just one user, it seems like an issue on the Outlook Client side.
Please trying to re-create new profile to fresh the caches.
Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
Found a similar thread for your reference:
Calendar Sharing not available error message
http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Problem with Pole zero analysis using multisim

Problem with Pole zero analysis using multisim
When I tried to find input impedance function's pole zero of a parallel LC network using Multisim
pole zero analysis, I get following message
| | doAnalyses: matrix is singular
| |
| |
| | pz simulation(s) aborted "
The circuit as well as log file attached.
How to correctly perform pole zero analysis?
Solved!
Go to Solution.
Attachments:
Parallel LC.JPG ‏8 KB
parallel LC.txt ‏7 KB

dear sir,
thanks for your earlier reply to my question on pole zero analysis
one more problem on pole zero analysis ;
i tried to do pole zero analysis for circuit(shown in attached file where C1=1/6F(167mF) C2=5/18F(278mF) for which
z(s)= (s^2+9)(s^2+1)
s(s^2+4)
for which zeros are at +/-3j ,+/-1j
poles at 0 ,+/-2j as per theory:
But multisim gives different values (shown in attached file)
what is the problem?
please clarify.
thanks & regards
sagar vanarase
Attachments:
1portLC.JPG ‏219 KB

I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

Did you fix the problem? I have the same problem and it has been pain in the neck.

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4)) I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

Problem with BAPI_DOCUMENT_CHECKOUTVIEW2 while calling using JCO of XMII

Similar Messages

Maybe you are looking for