Problem with BDC in PORTAL(its running fine in R/3)

i have done a BDC which works fine in R/3.....
but fials in PORTAL...
the reason being,
the BDC picks a record in a subscreen which has a table in a grid..the table has 15 records...5 records are visible normaly in portal(and 10 in R/3) rest of the record are visible after scrolling...
the BDC has to pick record at 14 position...it picks corectly in R/3...but when it comes to portal..the BDC stops and one has to manualy scroll and pick the record...
alternativley i have made the reocrd appear at 1 position...and everything is fine..
but whats the permanent solution?
is it related to portal..(like for BDC scrolling in portal is failing)
any alternative ways?
(the BDC is related to SEPARATION action in PA40)

Hi Kumar,
The permanent solution will be using BAPI's instead of BDC.
The BDC is entirely dependent on the screen and any changes in the screen will make the BDC vulnerable.
Thanks,
Arun

Similar Messages

Problems with upgrading to imovie4 after running fine with imovie3

I have a friend who works with imovie 3. She has a iMac flat screen 800mhz with 512mb ram. She has made about nine movies using imovie3 and everything was working fine. She then tried to upgrade to iMovie4 (I know dont fix it if aint broke) and now her movies are all choppy, if you try to run the whole movie. It is fine however if you run a couple three frames at a time. It is almost like it gets overwelmed and starts and stops. We tried going back to imovie3 with no success (this was after a format/ reinstall of her osx 10.3).
I tried these movies on my machine (mac mini 1.5ghz with 512mb ram) using imovie 4 and they seem to run almost flawlessly). Can someone please shed some light on this as I am clueless on how to move forward.
Thanks ahead for your much needed help.
Mini Mac 1.5ghz PowerPC G4 Mac OS X (10.4.7)

Turn off FileVault:
http://docs.info.apple.com/article.html?artnum=93460
If that didn't help, try everything here:
http://danslagle.dvmix.com/mac/OSX/panther.shtml
and here:
http://danslagle.dvmix.com/mac/iMovie/iMovie3FixesIssues.shtml
http://danslagle.dvmix.com/mac/iMovie/iMovie4FixesIssues.shtml
http://danslagle.dvmix.com/mac/iMovie/iMovie5FixesIssues.shtml

Problem with Application Server Portal 9.0.2.0.1.

I have a problem with Application Server Portal and Wireless 9.0.2.0.1.
Firstly I've installed the infrastructure on a Pentium 3 866Mhz 512Mb of Ram, with Windows 2000 Server (Italian) service pack 2.
I've maintained all predefined settings and I've chosen the UTF8 character set.
After installation, my infrastructure and OID works fine. The OID has port 4032 (as set by Oracle Universal Installer) instead of predefined 389.
After this I've installed Application Server Portal and Wireless on another host: a Pentium 3 733Mhz 384Mb of Ram, with Windows 2000 Server (Italian) service pack 2.
I've also maintained all predefined settings and automatic configuration of Portal and Wireless. I've pointed to my Infrastructure.
Try to test the Portal demonstration but an error occurred:
"SERVICE TEMPORARILY UNAVAILABLE. The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later."
On my EM Console I see: component instances 'OC4J_Portal' and 'OC4J_Demos' are UP, instead 'Portal:portal:7777' is down.
On the component lists I've clicked the link of component instance Portal:portal:7777, the 'control services' and 'Accessible Server SSO' are started, while 'Accessible Portal Repository' is down.
What can I do to get my portal started?

hi,
i have exactly the same problem. did you solve yours?
any suggestions or help how to do it?
thanks
erik
please reply to this post or [email protected]

Problem with BDC on VA02

Hi All,
I am facing a problem with bdc on va02. After hitting enter on the first screen it pops an info message "consider subsequent douments". It doesn't get recorded in recorded. Hence I am not able to run the transaction with no screen mode. Please help me to suppress the info message
Navin

Hi Navin,
These kind of messages and pop ups are precisely the reason why use of BDC for updating transactions is NOT advisable.
If you were to bypass such messages, you would have to put a check to see why the message appears (in this case probably because the sales document flow for the sales order in table VBFA has some documents) and then write a logic to either handle the message or not.
Instead i would recommend you use the BAPI functions provided by SAP to change the sales order.
Have a look the BAPI for sales order change attached to the business object BUS2012. For this goto transaction SWO1 and enter the BUS2012 business object. Then goto methods and look for the "change" method. Double click on the method and look at the BAPI used to implement the method. Go ahead and use this method in your program as against a BDC.
I am sure it will be a much better option.
Otherwise if you still want to proceed with a BDC, please debug at the point where the message/pop up appears to ascertain reason for the same and then incorporate the same check in your program to handle the pop up.
Regards,
Aditya

CS5.5 Design Premium / Problems with "Apply today for its unique advantages"

English
Problems with "Apply today for its unique advantages," by clicking on any of the options available to redeem the link does not work.
Spanish
Problemas con "Solicite hoy sus ventajas exclusivas", al hacer click en cualquiera de las opciones disponibles para poder canjear no funcionan los link.

Pat76 wrote:
Hi, did anybody had already problems with the CS5.5 Design Premium Suite on OSX Lion? I purchased the software as a Volume licenced product recently and everything was working fine, until since few days my Indesign and Illustrator keep crashing on launch. I de-installed and re-installed the entire CS5 Suite on my iMac, but Indesign and Illustrator still keep on crashing while launching. I already rang the Adobe tech support but they are not very helpful at all... Its quite frustrating.
No problems here with CS5. After I upgraded to Lion I did update to 5.5 and still did not experience any problems. There are some handy articlles on Adobe's web site relating to compatability with Lion, but I have experienced none. Have you checked the third party plug-ins in Illustrator and InDesign for compatability if you have any installed?
Pete

Hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

Have you changed the system voice to an English one in system preferences?

HT204088 i am having a problem with my previous payment, its not excepting it?

i am having a problem with my previous payment, its not excepting it?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
If you just purchased the software and the redemption codes are coming up as invalid then the seller needs to resolve that. If you were able to acquire the serial number by redeeming the redemption code, then you should follow the seller's advice and contact Adobe support thru chat (when they are available).
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache. If it fails to connect try using a different browser.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

HT1222 hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

I have had to periodically delete and re-enter my fingerprint. The last update (7.1) may have improved that. You can delete by going to Settings > Touch ID & Passcode, enter your passcode and then tap "Turn Passcode Off" and then go back to the same area, put a passcode back on and then a fingerprint.

XML fetch failed -- possibly a problem with AvXml.dll or its permissions

When attempting to access the Status Monitor I receive the following error message:
XML fetch failed -- possibly a problem with AvXml.dll or its permissions.
Check that the "AvXml" virtual directory settings in IIS have proper permissions and allow execute access.
I've tried all combos of security on the IIS directory. What am I missing?

Hi Lindborg
I have that problem with version 4.0 (X), it is due?, As I fix?.
Unity I have a failover cluster, I have several problems, sometimes not let me delete mailbox, I can retrieve messages.
thanks for any help you can provide.
Regard

Problem with WEBGUI in portal

Hi All,
I had conected to production server and created Transactional Iview with SAPGUI for WINDOWS and also running with successfull result..
I had done the fallowing things with the Stnadard SUPER ADMIN USER
1.created a system object for production server with fallowing parameters..
CONNECTOR
Application Host (server name )
Gateway Host ( server name )
Logical system Name XXX
RemoteHost Type 3
SAP client 900
SAP sytem ID ECP
SAP Sytem Number 00
Server Port 3200
System type R/3
USER MANAGMENT
Logon Method UIDPW
User Mapping type Admin, user
WEB APPLICATION SERVER
WAS Host name (server name:8001)
WAS Path /sap/bc/bsp/sap
Protocol Http
ITS server
WAS Host name (server name:8001)
WAS Path /sap/bc/gui/sap/its/webgui
Protocol Http
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: WAS Protocol (http) WAS Host Name (sakataep04:8001)
5. HTTP/S connection successful
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (sakataep04:8001)
6. User mapping is valid
7. HTTP/S connection successful
2.activated ITS services for both EP WAS and Production server successfully and the URLs are also working fine.As i am using integrated ITS
i checked with the fallowing URL.
http://server:port/sap/bc/gui/sap/its/webgui
It had shown the screen of SAP WEB Application Server with portal SID and asking for credentials. after proving the credentials its shown SAP screen successfully.
My aim is to make use of SAPGUI for HTML in the place of SAPGUI for WINDOWS.
Now i had changed SAPGUI for HTML in transactional IVew and getting the same screen succesfully. as it ask for SAP user Id pwd. i had entered the same credentials wat i had entred earlier during the test. Now its showing an error like
Client, name, or password is not correct; log on again .
For your information we had setup the UME data source as AS ABAP.and had face the problem of creating users from portal identity mangement. so created the users from WAS directly. But any ways right now i am working with the superadmin user only.
what could be the problem ?why its not working in portal while working fine with URL ?
Please guide me .

Hi Pratap
Check SAP Note 698329 this note give details for logon fails
U Need to enable SAPGUI for html
goto se80 give internet services (in the drop down box)
Below drop down give SYSTEM publish these service by right clicking system publish--complete service.
and also publish same way WEBGUI
and also enter ur server ip address and hostname in C:\WINDOWS\system32\drivers\etc-->hosts
Hope this helps you.
Regards
Krishna.

Transaction AIAB (Auc Settlement) - Problem with BDC

Dear Friends,
Problem: I am trying to distribute the amount of a asset (Auc) to other assets on line item basis by using BDC for transaction AIAB. I am facing problems when using amount based through BDC.
Can you please suggest ASAP if any FM or BAPI's available to achive this for transaction AIAB?
Thanks,
Ram.

Hi Ravi,
Thanks for your valuable reply..
Everything is fine if i run the transaction in ALLSCREEN mode, but iam facing the problem with the same after running it in NOSCREEN mode 'N'..
Pls help..

Problem with installing free App (Everything is fine, bur we had a small problem getting your license)

Hello,
We have free App for SharePoint Online. Some our customers have problems with the installation. After install they see an issue with obtaining a license which should be free.
"Everything is fine, bur we had a small problem getting your license. Please go back to the SharePoint store to get this app again and you won't be charget for it."
See the screen:
How can we resolve the issue?
Thank you!
Our App: "Resource Reservation"
https://store.office.com/resource-reservation-WA104276770.aspx

Hi Gabe,
First, please check the suggestion above is helpful. I also suggest you removing all version of Office and re-install Office 2013.
We can try to run the application as an administrator and check if it works.
1. Right click the shortcut of the application or the main application.
2. Select properties.
3. Select compatibility tab and select "Run this program as an administrator."
If there is anything I can do for you about this issue, don't hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Problem with chatbox in forum, its now unusable

I am having problem trying to use a chatbox in a forum I often visit, up to yesterday with 3.6 all was ok, but now with 4.0 the chatbox moved from buttom of page to up right over another text in the forum, making it impossible to use or read.
I uploaded a picture here : [http://www.pic2up.net/image/YmWQCjk problem with chatbox ]
that forum uses vbulletin version 4.0.3
thanks for any help
norberto

Has anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM

Potential problems with using a report to run a commit in a separate LUW.

I am working with a classic Badi within a transaction where I wanted to commit some information to a database before the commit that occurs at the end of the transaction.
Putting a commit point directly inside the BADI caused problems with cursors that were open inside the transaction, so I researched some and discovered that Report Programs can run in a separate database Logical Unit of Work (LUW).
I coded my BADI to call a report which does some database work based on input parameters, and then commits this work to the database before returning control back to the calling BADI function.
Does anyone know of any potential problems from doing this? It seems like a good way to get around restrictions on the use of commit points inside transactions, but I'm not sure if there could be potential undesired effects from doing this.
Has anyone tried this before?

Hi Clay,
Yes I did it too. We faced some issues with commit when using fm HR_INFOTYPE_OPERATION . We had to enclose it in separate report which only then let us do physical change in DB.
What is to be noticed here as well is (according to SAP) that DB commit is triggered each time work process is released which happens when:
- system shows dialog message
- RFC call is executed
- new transaction is called
The above however didn't work for me in couple cases, but using separate SAP LUW solves the problem (as you already read). This happens each time:
- new report is called (SUBMIT ...),
- new transaction is called (CALL TRANSACTION ...)
- new asynchoronus RFC call is executed (CALL FUNCTION...STARTING NEW TASK).
This approach works fine for cases I met and had to overcome with such solution. So far we didn't face any issues with that. Works perfectly
Regards
Marcin

IPad 1 Gen. With 5.1.1 its Running very Bad

I have a iPad 1 Gen. With the 5.1.1 iOS and its Running very Bad , restarts and Black Screen is comming so much That i Cant use the iPad normal :( what can i do.? I try to downgrade but Iam Not abble to fix ist to 4.0 or 5.0 :(

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
The problem could be with your router and internet connection. You can download several apps to check your speed.
How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
 Cheers, Tom

Problem with BDC in PORTAL(its running fine in R/3)

Similar Messages

Maybe you are looking for