Problem with Beat Marker

I am using Premier Elements 9 and in the middle of editing clips in the Timeline the beat marker stopped moving. How do I fix it?

David,
That is great news!
I have been working with PrE 11 for some time now, on an older laptop. It is still running XP-Pro SP3, so is 32-bit, with that version of PrE 11. I have also run into the "end-of-life" for my nVidia video driver, unless I change the OS. Now, and with that said, I have experienced several lags with the CTI, and also several instances where the Spacebar will not start the Timeline's playback, even when I know that it has focus.
Because of my older hardware, and one known issue with my video driver, I hesitate to complain about the CTI performance (and a few other issues), as it might not be related to PrE 11, but just to the hardware.
Glad that rebooting got you up and editing. Good luck,
Hunt
PS - I have my new super laptop, but have not had time to set it up, install the 64-bit PrE 11 on it, and test with a new, killer nVidia card. When I can block off a couple of days, I will do so, and then report whether I encounter such "glitches" with the new hardware.

Similar Messages

Trouble with beat marks in imovie 09

Must be me but here is my situation. The first 15 seconds of my project is an avi with audio to it. I want to insert 75 pictures to an audio file that plays after the first 15 seconds with beat marks. I am having trouble doing this. I can't find a tutorial that lets me do this. "An helpers out there?

I see this was a MP4 clip brought into iMovie from iPhoto. The encoder is given only as AVC. Was the original clip from a camera shooting AVCHD? I am surprised that the audio is good since often AAC is a problem and also the rate is 44.1KHz not 48 which is standard for video. What camera did you use? iMovie 10 should work with AVCHD but it is highly compressed and can be problematic depending on the power of your computer. You might try converting the clip to Quicktime movie with prores 4.2.2 encoder using MPEG Streamclip which is a free download.

Problems with quotations marks

Hi,
I got some problems with quotations marks in my queries.
I am trying to do something like this:
<cfset Variables.sqlAux = "select * from customer where
name='Rodrigo' ">
<cfquery>
#Variables.sqlAux#
</cfquery>
Coldfusion returns this error messagem:
Incorrect syntax near 'Rodrigo'.
Some one can help?

I should also expect this to work:
<cfquery>
#toString(Variables.sqlAux)#
</cfquery>

Any problems with beats pill

anyone have problems with beats pill

Don't know about the new model, but the first two models, you really had to push to get the phones in. Be strong!

FM 8 Problem with diacritical marks in index

I have text in Latvian using Times new Roman Baltic fonts with items marked for inclusion in the index.
When an index is generated, the index automatically is generated using Times New Roman fonts and the diacritics are wrong. Changing the font to Times New Roman Baltic does not correct this problem.
I have specified the Group Titles sort order with letter groups, however, they do not sort properly.
e.g. A;Â is specified in the sort order, but the index displays only the group title A and includes the â terms under it.
I have set up the identical Index specification that I was using in Framemaker 7, but am unable to get correct results in FM8

Sveiks Ansi, With FM 8, you can't use the code-page specific registry instances of a WGL truetype font. You either have to use a specific code-page encoded font, such as the Tilde Baltic versions, or re-map the specific latvian code-page characters from their WinBaltic CP1257 settings to their unicode values. The remapping can be done relatively easily using a text editor or a grep-like tool (e.g. Search & Replace, TextPipePro, WinGrep, etc.) on a v.7 MIF version of the FM file (this is important, since FM8 gives you a choice of the MIF versions that you can save as). Search for the FM hex values and replace these with the required unicode value, e.g. zcaron (ANSI 253 in the CP1257 codepage) is \xca in the FM hex coding and needs to be \u017e in unicode. You can use Windows Charmap function to get the 4-character unicode values (but ignore the hex-value reported). You can also do this "re-mapping" using FM's find/change (again look for the \x hexcodes and replace with unicode \u values), but it's tedious. You also need to change the font from the Times New Roman Baltic to just Times New Roman. Note: for the MIF route, you also *must* change the initial <MIFFILE...> statement to show as an 8.00 version for this to work properly, otherwise if FM re-imports this as a v.7 MIF it will not honour the unicode mappings. Once you've got everything converted to unicode values, then specifying the group sort orders of the index should also work properly. Yes, I know, it's a real PITA working with legacy codepage-specific documents in FM8. - Arnis

Problem with inventory marker

Hi,
I have a problem with my inventory markers.
When I do: Material 1000251, Plant=0212, Record type = 1 (Only include material, plant, day, issues, and receipts)
I get the totals of: Issues = 0. Receipts = 1 (This is correct. On hand Qty = 1)
When I do: Material 1000251, Plant=0212, Record type = 1 (but I now include 0MAT_PLANT as well)
I get the totals of: Issues = 0. Receipts = -4 (This is NOT correct. On hand Qty = 1)
Any ideas on how to correct this marker problem for 0MAT_PLANT?
Thanks,
Chris

Hi Chris,
Check the Marker Update scenarios in the below doc. This would give you some clue on your issue.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards,
Suman

SCCM 2012 Update Group inconsistency Problem with Red marked Updates

Hi everybody,
we have a big Problem with our SCCM 2012 R2 CU3 Enviroment, regarding of Update Groups which got out of sync.
we have a SCCM Site Infastructure with one CAS and 4 Primary Sites and on every Site is the SUP Role installed.
I don't know when this failure occours but i think it was after the CU3 Installation. The Installation itself went smooth without any Errors or Warnings.
The Problem is as following. We have some updates in Update Groups (all of them are Core XML Updates) which are out of sync and marked red as an invalid Update on 2 Primary Sites. On the CAS Site and the 2 other Primary SItes they are marked as green (downloaded
yes and deployed yes)
We have no Replication issues regarding the Replication Status (everything is synchronized to 100%) and the Replication Link Analyzer does also show no Problems at all.
I now deleted the Deployments and the SW Update Group waited until the replication was fine and created a new one and downloaded these patches on one of the Primary Sites which had shown this Failure.
The Result was not good. It looks like before. On the CAS and 2 Primary Sites the Deplyment is shown as downloaded but on the other 2 Sites the Status is again Downloaded=no.
Does anybody have any idea what to do now ? I checked objmgr.log and rcmctr. log but found nothing what shows me the way in the right direction.
Thx for your time, and it would be fine if anybody can share knowledge about this failure and how to fix it.
All other Ideas are also welcome.
Thx a lot in advance and have a nice bug free day :-)
Bastian

Hi,
Please try to manually synchronize software updates from the CAS and monitor the WSUSCtrl.log, WCM.log and wsyncmgr.log on the CAS and Primary sites.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem with beats

I have problem with my beats studio new. I bought beats in New-York and on the next day I felt very big problem. On the charge I see 5 white flash-lights and without charge - one red flash light. So there is not sound. I am from Ukraine and we have here some app stores, so can I change my beats? Please... Help me.Best regards Bogdan

Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 15-j011dx Notebook and issues with the Beats Audio. Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that might need updating.
Here is a link on troubleshooting the sound. It has a number of great troubleshooting steps including using the built-in Windows troubleshooter.
1. Right click the Speaker icon in the bottom right corner by your time.
2. Click Playback Devices.
3. Click Speakers.
4. Click properties.
5. Click the advanced tab on the Properties window.
6. Change the Default Format drop-down to the highest quality.
7. Apply the properties.
8. Click OK to close the properties window.
Hope this helps with the sound.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Pavilion dv4 Notebook 5009 tx,PC problem with Beats audio

Hi ,
I have problem with the Beats audio from morning onwards on my PC running windows 7 Home, I even uninstalled some of the latest updates from windows, audio icon is showing (x) in redmark, i have uninstalled IDT audio but the problem still perstists, Please help me to resolve.
Thanks
Bhargava
email id : [Personal Information Removed]
Mob No : [Personal Information Removed]

Hi @Bhargava449
I saw your post regarding the problem with your Beats Audio and I will be happy to help. Use the HP Recovery Manager to Restore the Original Drivers look for the IDT High-Definition Audio driver. I have had success using this method to restore the Beats Audio with other customers using this method.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Problem with beats audio

I have a HP Pavilion - 14-v140 laptop that came with Beats audio. When I playing music I noticed that the volume has decreases and then increases Why?

Does the volume icon show the volume fluctuating? If not, this could be a problem with either the music you're listening to, or your computer's audio system.
I hope this helps!
If you feel that I helped you, give me a thumbs up button and hit the "accept as answer" button so others can find the answer as well .

Batch Capture Problem with 5D mark II

At the end of an event we normally copy all cards to the HDD, each card in a separate folder. We then point FCP at the card folders and use log & transfer to ingest the footage and transcode to ProRes 422.
Once all the footage is ingested we save the project and copy it from the Mac Pro to the iMac so that a second editor can work on it at the same time. Because the iMac doesn't have a RAID we set all the footage to 'offline' and use batch capture to recapture it all in ProRes Proxy.
So far so good.... that is with all the Panasonic HMC footage.... BUT we recently started shooting on the Canon 5D2 and 7D as well and this simply isn't working.
For some reason FCP recaptures all the Panasonic footage but refused to re-capture the Canon footage. I can see all the files in the L&T window but it never seems to equate the footage with the files I am trying to recapture.
HELP! What could be causing this? It's only a problem with the Canon footage.
Both MacPro and iMac are running identical versions of FCP and identical (latest) versions of the Canon L&T plug in ..... and YES we copied the entire CF card to a folder - just like we do with the Panasonic HMC stuff.

Hi Andy, compressor is current chugging away, so we'll get going for the edit I am sure. Only 600 more clips to go
I've tried everything I can think of in terms of recapturing. Even on the original Mac Pro that the footage came in to, if I copy the entire project folder (including the 'cards' folder) from one RAID to another it fails to recapture in the original project using the original codec (ProRes 422), but if I point it back to the original cards folder it works fine. It seems to be 'moving/copying' the cards that is causing the problems.
I've checked the dates and sizes on the copied files and they are all the same, and since recapturing to the original project at the original settings doesn't work once moved I am completely stumped....!

Problem with quotation marks in Reports

Hello,
in Reports i have a text item, and i wrote a text „test” (this is copy/paste from a Word Document). At runtime i see ?text?
Why those quotation marks does not appear correctly at runtime?
It's about Reports Developer 2000. Please help if you can.
Regards,

my NLS_LANG, before editing in registry was AMERICAN_AMERICA.WE8ISO8859P1 (without that '5' at the end).
it's WE8ISO8859P1 not WE8ISO8859P15. and i have the NLS_LANG, AMERICAN_AMERICA.WE8ISO8859P1. stil not displaying ok..
this problem has nothing about the server, but the client, i think.
the problem appears when i call a report from a form. when i run the report inside Report Builder, the quotation marks appears as „ ".
Regards

Strange problem with quotation marks - help

For some reason the quotation mark has been replaced by the @ symbol for all fonts?? Whenever I type ", the @ symbol is placed in the text field instead. It only happens in one particular document and I have done a save as and re-named the document and opened and closed it, but it still happens.
Any suggestions would be appreciated.
Paul

Windows has a toggle function for input keyboards. I can't recall what key combo it was, since I turn it OFF asap on every single installation I work with :-) but it is something with Shift+Alt.
Double click the language icon in the task bar to change the settings.
It might happen in only one file because if Paul does something in that file, he's accidentaly using the keyboard toggle keys :-)
Just for laughs: press the left shift key five times and see what happens. If you get a dialog, go through every option and turn its key activation combo off.

Problem with beat-syncing

I have a song in my library that I created beat markers for. Snap To Beats is turned on. Let's say there is 15 secs between 2 beat markers and I add a 10 sec video, it will lengthen my video by including portions at the end that I did not select. Instead, I would like it to slow down my 10 sec video so it becomes 15 secs long. Is there any way of doing this?

Not sure if there is anything overriding speed settings if using snap to beat, but this is how you slow, speed or reverse a clip in the Project:
1. in the Project window click the blue gear, lower left of the clip you want to lengthen.
2. Select Clip Adjustment from the menu.
3. In the middle of the Inspector window is the Speed section, click in the time field to the right, enter 15:00.
4. Click OK.

Problem with quotation marks.

I've made an exercice 'fill in the blanks' in Captivate where children have to fill in a quotation mark. Captivate uses curley quotation marks, but when you make the exercice in a browser you only get straight quotation marks and the result is 'wrong'. How can I fix this?

I doubt that you will be able to resolve this. There are some punctuation characters that are not recommended for use in Captivate projects because they are also used in programming languages and can cause conflicts in the runtime project.

Problem with Beat Marker

Similar Messages

Maybe you are looking for