Problem with Bex query

Hi ,
I crated a query based on a Infoset.I am trying to run that in RSRT and it gives me this erroe.Can anyone tell me how to resolve this probelm??
Error : Query could not be opne! GENUNID is INVALID , Message no.BRAIN665

Hello,
open the query IN QUERY DESIGNER n check whether its correct.
Save it and provide right technical name and execute it.
Also amke sure you are running the query in the right system.
Generally this error occurs when we do not provide the right name of the query.
You can use the F4 help at the RSRT to reach the right query.
Regards,
shashank
Edited by: Shashank Dighe on Aug 11, 2009 11:45 PM

Similar Messages

Problem with bex query listing sales "this month" and "same month last year

Hi,
I've created a query in BW BEx, where I have a mandatory variable for 0calmonth, and I list 0material and sales (in volume, liter). And I have a restricted key figure giving me sales (volume in liter) restricted with 0calmonth = variable - 12, to give me the sale for the same month the user select, previous year.
This seems to be working, the sum is correct, but when adding up the number for the sales in the month previous year, the numbers does not fit the sum in the end.
I think the report only lists materials with sales the month selected in the variable, if a material has not been sold that month, but in the same month last year, it's not listed in the reports, but it's added in the sum in the end.
Example.
We have three records like this:
material - calmonth - volume
101 - 01.2010 - 5
101 - 01.2011 - 8
201 - 01.2010 - 7
The report will give the following (calmonth variable = 01.2011)
Material - volume this month - volume same month last year
101 - 8 - 5
Sum 8 - 12
Any way to solve this issue? We noticed because we run BO - Webi on top of the BEx query, and BO sum's the values per material, and in webi the report would give us the sum 8 and 5.
Any input is appreciated.
Regards,
Øystein

Hi,
thanks for your reply.
The error is that the report only seems to list materials that has been sold "this month", and if the same material was sold the same month last year, it will also list the volume for this.
But if the material is only sold in the same month last year, it's not listed in the report, but it's calculated into the sum at the end.
The report is listing material, which is why the error presents itself, as you said
Getting 8 minus 12 is correct unless you drill down by material. In that case, it should be 8 minus 5 and 0 minus 7.
The row with 0 - 7 is not shown, and my guess is that the report will only list materials that has sales this month (which has been selected in the variable)
Regards,
Øystein
Edited by: Oystein Gundersen on Mar 21, 2011 4:36 PM

Problem with jump query

Hello ,
iam having problem with jump query when i execute the web report but the same jump query is working fine in Bex analyzer.i think there are some settings need to be done in SAP WAS for web report. if it so can anybody tell me how to maintain these settings so that i can execute the my web report.
Regards
Komal

Hi Komal,
What is the problem you are facing while executing the report.
Are you working on WAD? Explain clearly about your problem you are facing.
Regards,
KK.

Reporting designer - problem with insertin query

hi, I have problem with inserting query into reporting designer, when i do it there occurs metadata error and the system write check query, but query is ok, there are no variables. Have you any idea whats the problem.
thanx

I had a similar problem after "upgrading" to SAPGUI 7.10, except my failure was in the BEx Analyzer. (We are still using BW 3.5 SP 18.)
The solution I found was in SAP Note 1039191 which addresses this problem for both the Analyzer and the Query Designer, and includes a revised "wdbsPres.dll" file as a workaround. After downloading and installing this file, the problem was resolved.
BTW, I have asked SAP when this will be fixed in a future FEP, but they have so far only given me a very ambiguous reply suggesting that I try it on another PC.
Hope this helps...
Bob

Crystal Reports with BEx Query using Custom Exit Variable

Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
Andy

Hi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy

Problem with a query with a BLOB data type

Hi i've a problem with this query in 11g. R1
SELECT
      LOGTIMESTAMP,
      LOGTIMEMILLIS,
      MSGID,
      XMLTYPE(MESSAGEBODY, nls_charset_id('AL32UTF8')).getClobVal() as LLamada
FROM
    vordel.AUDIT_MESSAGE_PAYLOAD,
    vordel.AUDIT_LOG_POINTS
WHERE
    AUDIT_LOG_POINTS.LOGPOINTSPK = AUDIT_MESSAGE_PAYLOAD.MP_LOGPOINTSPK AND
    LOGTIMESTAMP between TO_TIMESTAMP('03-12-2011 00:00','DD-MM-YYYY HH24:MI') and TO_TIMESTAMP('03-12-2011 12:00','DD-MM-YYYY HH24:MI')
     and filtertype = 'LogMessagePayloadFilter'
and filtername like 'Log Llamada%'MESSAGEBODY: data type of the Column is BLOB
throw this error after execute the query
Error:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00200: could not convert from encoding UTF-8 to UCS2
Error at line 1
ORA-06512: at "SYS.XMLTYPE", line 283
ORA-06512: at line 1

Could you check the BLOB really contains UTF-8 encoded XML?
What's your database character set?The BLOB contains UTF-8 Encoded
and the database where i am connectes have AL32UTF8 character set, but my internal instance have "AMERICAN_AMERICA.WE8ISO8859P1"
that is a problem?
How could I change the character set of the oracle local client to the character set of the remote oracle data base?

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

Problem with Hierarchical query

Gurus,
I have a problem with hierarchical query, which I am pasting below.
select sys_connect_by_path (Fname,'/')"PATH",Fname,id,level
,(SELECT COUNT(ID)-1 FROM (SELECT CONNECT_BY_ROOT LNAME LNAME,ID FROM CMT_PERSON
START WITH ID = 'emplo000000000126009'
CONNECT BY PRIOR ID=MANAGER_ID)
GROUP BY FNAME)"COUNT"
from CMT_PERSON
WHERE
LEVEL <= 4
----And ID='emplo000000000001877'
CONNECT BY PRIOR id=manager_id
----AND NOT LEVEL > 3
START WITH ID='emplo000000000126009'
As per the result, count is getting repeated for all the levels. That is, count is coming 16100 for every level, Can you please help where exactly I am going wrong
Regards

You do not say anything about what count you want to get?
A wild guess could be:
select
   sys_connect_by_path (p1.fname, '/') "PATH",
   p1.fname,
   p1.id,
   level,
   (select count (id) - 1
    from
       (select connect_by_root p2.lname lname, p2.id
        from cmt_person p2
        start with p2.id = p1.id
        connect by prior p2.id = p2.manager_id)
    ) "COUNT"
from cmt_person p1
where level <= 4
connect by prior p1.id = p1.manager_id
start with p1.id = 'emplo000000000126009';Since your inner query simply starts with the hardcoded employee id, naturally it will give you the same count.
My guess is your inner query should start with the person id from the outer query?
If that is not the case - please state in plain english what you are trying to accomplish ;-)
(Oh, and please paste code within tags so we can read it more easily...)

Problem with af:query

Hi,
I have a problem with af:query. Here's what I do:
1. create a VO, define view criteria
2. drag and drop view criteria from data controls to an empty form, choosing query and table
3. When I run the page and click any of the buttons, I get: "Because of inactivity, your session has timed out and is no longer active...."
I see no exceptions in output window. What am I doing wrong?
Here is my view defenition:
<?xml version="1.0" encoding="windows-1250" ?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">

<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="EmployeesView"
Version="11.1.1.49.49"
SelectList="Employees.EMPLOYEE_ID,
Employees.FIRST_NAME,
Employees.LAST_NAME,
Employees.EMAIL,
Employees.PHONE_NUMBER,
Employees.HIRE_DATE,
Employees.JOB_ID,
Employees.SALARY,
Employees.COMMISSION_PCT,
Employees.MANAGER_ID,
Employees.DEPARTMENT_ID"
FromList="EMPLOYEES Employees"
BindingStyle="OracleName"
CustomQuery="false"
PageIterMode="Full"
UseGlueCode="false">
<DesignTime>
<Attr Name="_codeGenFlag2" Value="Access|VarAccess"/>
</DesignTime>
<Variable
Name="firstName"
Kind="viewcriteria"
Type="java.lang.String"
DefaultValue="0"/>
<EntityUsage
Name="Employees"
Entity="project3.Employees"
JoinType="INNER JOIN"/>
<ViewAttribute
Name="EmployeeId"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="EmployeeId"
EntityUsage="Employees"
AliasName="EMPLOYEE_ID"/>
<ViewAttribute
Name="FirstName"
PrecisionRule="true"
EntityAttrName="FirstName"
EntityUsage="Employees"
AliasName="FIRST_NAME"/>
<ViewAttribute
Name="LastName"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="LastName"
EntityUsage="Employees"
AliasName="LAST_NAME"/>
<ViewAttribute
Name="Email"
IsUnique="true"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="Email"
EntityUsage="Employees"
AliasName="EMAIL"/>
<ViewAttribute
Name="PhoneNumber"
PrecisionRule="true"
EntityAttrName="PhoneNumber"
EntityUsage="Employees"
AliasName="PHONE_NUMBER"/>
<ViewAttribute
Name="HireDate"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="HireDate"
EntityUsage="Employees"
AliasName="HIRE_DATE"/>
<ViewAttribute
Name="JobId"
IsNotNull="true"
PrecisionRule="true"
EntityAttrName="JobId"
EntityUsage="Employees"
AliasName="JOB_ID"/>
<ViewAttribute
Name="Salary"
PrecisionRule="true"
EntityAttrName="Salary"
EntityUsage="Employees"
AliasName="SALARY"/>
<ViewAttribute
Name="CommissionPct"
PrecisionRule="true"
EntityAttrName="CommissionPct"
EntityUsage="Employees"
AliasName="COMMISSION_PCT"/>
<ViewAttribute
Name="ManagerId"
PrecisionRule="true"
EntityAttrName="ManagerId"
EntityUsage="Employees"
AliasName="MANAGER_ID"/>
<ViewAttribute
Name="DepartmentId"
PrecisionRule="true"
EntityAttrName="DepartmentId"
EntityUsage="Employees"
AliasName="DEPARTMENT_ID"/>
<ViewCriteria
Name="EmployeesViewCriteria"
ViewObjectName="project3.EmployeesView"
Conjunction="AND">
<Properties>
<CustomProperties>
<Property
Name="mode"
Value="Basic"/>
<Property
Name="allowConjunctionOverride"
Value="true"/>
<Property
Name="autoExecute"
Value="false"/>
<Property
Name="showInList"
Value="true"/>
<Property
Name="displayOperators"
Value="InAdvancedMode"/>
</CustomProperties>
</Properties>
<ViewCriteriaRow
Name="vcrow24"
UpperColumns="1">
<ViewCriteriaItem
Name="FirstName"
ViewAttribute="FirstName"
Operator="STARTSWITH"
Conjunction="AND"
UpperColumns="0"
Required="Optional">
<ViewCriteriaItemValue
Name="EmployeesViewCriteria_vcrow24_EmployeeId_vcval0"
Value=":firstName"
IsBindVarValue="true"/>
</ViewCriteriaItem>
</ViewCriteriaRow>
</ViewCriteria>
<ViewLinkAccessor
Name="EmployeesView"
ViewLink="project3.EmpManagerFkLink"
Type="oracle.jbo.RowIterator"
IsUpdateable="false"/>
</ViewObject>
And JSF page:
<af:panelGroupLayout layout="vertical">
<af:panelHeader text="Employees">
<af:query id="employeesViewCriteriaQueryId" headerText="Search"
disclosed="true"
resultComponentId="employeesViewCriteriaQueryResultId"
value="#{bindings.EmployeesViewCriteriaQuery.queryDescriptor}"
model="#{bindings.EmployeesViewCriteriaQuery.queryModel}"
queryListener="#{bindings.EmployeesViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.EmployeesViewCriteriaQuery.processQueryOperation}"/>
</af:panelHeader>
<af:table value="#{bindings.EmployeesView1.collectionModel}" var="row"
rows="#{bindings.EmployeesView1.rangeSize}"
emptyText="#{bindings.EmployeesView1.viewable ? 'No rows yet.' : 'Access Denied.'}"
fetchSize="#{bindings.EmployeesView1.rangeSize}"
id="employeesViewCriteriaQueryResultId">
<af:column sortProperty="EmployeeId" sortable="false"
headerText="#{bindings.EmployeesView1.hints.EmployeeId.label}">
<af:outputText value="#{row.EmployeeId}">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.EmployeesView1.hints.EmployeeId.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="FirstName" sortable="false"
headerText="#{bindings.EmployeesView1.hints.FirstName.label}">
<af:outputText value="#{row.FirstName}"/>
</af:column>
<af:column sortProperty="LastName" sortable="false"
headerText="#{bindings.EmployeesView1.hints.LastName.label}">
<af:outputText value="#{row.LastName}"/>
</af:column>
</af:table>
</af:panelGroupLayout>
Regards
Jernej
Message was edited by:
Jernej Kase

It also seems that quick queries don't work with SQL92 sqlBuilder.
I get the following error:
Messages for this page are listed below.
Error
SQL error during statement preparation. Statement: SELECT Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.EMAIL, Employees.PHONE_NUMBER, Employees.HIRE_DATE, Employees.JOB_ID, Employees.SALARY, Employees.COMMISSION_PCT, Employees.MANAGER_ID, Employees.DEPARTMENT_ID FROM EMPLOYEES Employees WHERE (( ( ( UPPER(Employees.FIRST_NAME) LIKE UPPER(:vc_temp_1) ) OR ( ? IS NULL ) ) ) )
Error
Missing IN or OUT parameter at index:: 2
Is this a bug or this doesn't work by design?
Edit: and if I create named query I get the following error:
Caused by: oracle.jbo.NoDefException: JBO-25058: Definition fn of type Attribute not found in EmployeesView1
     at oracle.jbo.server.ViewObjectImpl.findAttributeDef(ViewObjectImpl.java:5634)
     at oracle.jbo.uicli.binding.JUSearchBindingCustomizer.getQuickSearchVC(JUSearchBindingCustomizer.java:847)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:222)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:151)
     ... 47 more
I think just ran out of options...
Message was edited by:
Jernej Kase

Problem with update-query

Hallo,
i have a problem with following query. I wanna update the columns in the nutzung table. There are 7 columns but my query updates the geometry that in all columns is the same geometry or I can not update because the query gives more than 1 row in the subquery.
update nutzung
set geometrie=(SELECT F1840_GEOM FROM UG_F1840_GEOM,Nutzung WHERE NUTZUNG.OBJNR=UG_F1840_GEOM.F1840_OBJNR AND GETFEATUREID(UG_F1840_GEOM.F1840_FID) IN(SELECT MSLINK FROM FEATURE WHERE FCODE like '%0000'));
Maybe I need the ug_f1840_geom table in the update query. Don't know how to change the query.
Regards, Katrin

hi it's me again .I am getting error for this
statement
if(numOfUsers>0)
stmt.executeUpdate("update defaultchatrooms set
s set nodename =
'"+chatTopic+"'('"+numOfUsers+"')'");
1. Your update string looks like this:
update defaultchatrooms set nodename = 'someChatTopic'('0')'
Does that look right to you?
2. This will update the column nodename in every row in the table defaultchatrooms. Aren't you missing a "where" condition?

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

One more Problem with SAP query

Hi All,
I am having a problem with SAP query
Execution of SAP query transaction is leading to Dump
the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
When I tried regenerating the Query in SQ01
" Query Specification cannot be use to generate list
Ranked list contains only numeric fields
Please help me

Gianpiero Bucchieri wrote:
> So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok.
>
I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
So what we have here (essentially is):
VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
Care to explain?
Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM

Dynamic filtering with BEx query variables in WebI 3.1

Hi experts.
Can anybody help me ?
1) I use BEx query variables in WebI 3.1 . But i can't understand how to order fields of selection screen in WebI reports
2) How can i use Dynamic filtering with BEx query variables in WebI 3.1 ?
It's need that list of second field on selection screen will be accoding to result of selection first field on selection screen and so on .
Need i use BEx user-exit variables ?
Thank you

Hi,
1) Variable sequence isn't respected in XI3.1 - and can't be modified in OLAP.unv (this enhancement exists in 4.0 )
2) Dynamic filtering? Yes, Exit routines are the best way to go for this.
Regards,
H

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

IP - Various problems with BEX Analyser - help would be nice

Hi,
we use IP in combination with BEX analyser. We experience certain problems. Does anyone experienced the same issues mentioned below:
1) if a planning function is executed, it is executed twice when your cursor is within the query itself. If it is outside the query when clicking on the button, it is executed once (like it should).
2) Locking: we don't have locking problems, but from the moment two people lock each other once, they need to close their analyser and re-open it (so logon again) in order to be able to start planning again in a non-locked part. If they just change their selection (to the not-lock part) they remain locked!!!
3) planning function with multiple variables: system cannot retrieve values of all variables.
details of function:
CMD                                               1       EXECUTE_PLANNING_FUNCTION
PLANNING FUNCTION NAME           1      AG10_COPY01
DATA PROVIDER_FILTER                 1     DATA_PROVIDER_1
VAR_NAME                                     1       PROF_CTR
VAR_VALUE                                    1       510
VAR_NAME                                     2     PERIOD
VAR_VALUE                                    2        012
VAR_NAME                                     3       CUSTOMER
VAR_VALUE                                    3     1000
-> following the instruction of the SAP course, in case of multiplle variables they should start from 0 and have an incremental increase. But the system only recognizes the variable with index = 1
regards
D

Dear Dries,
could it be that the variable type you use require a different set of commands?
In general the parameters of the BEx Analyzer follow the rules of the SAp BW 3.5 Webruntime. When reading this detailed documentation you find that depending on the type of variable other names have to be used, e.g. when using a selection option variable you need something line varname_low, varname_high, ...
The documentation can be found in the online-help:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm</a>
Best regards, Olaf Fischer

Problem with Bex query

Similar Messages

Maybe you are looking for