Problem with Big Bang z77 mpower and USB3

I built my pc last night and everything was working just fine. I have 3 external harddrives connected to the USB3.0 ports in the back. Last night, I was able to see all 3 (along with my 4 internal harddrives (1ssd, 3 hdd)). I turn it off for the night and then this morning, the only thing I was seeing was my internals. Nothing changed between then and now. I did see a UB91 in the device manager with a yellow triangle.. updated all my USB controller drivers via the downloads from MSi's website which got rid of the yellow device but my USB drives are still not showing. My USB2 ports seem to be working. My mouse/keyboard are connected to the ones in the back. I connected a thumb drive to the front ports of my HAF case (both USB 2.0 and 3.0 ports) and it showed up in each one. Not sure why my back USB3.0 ports are no longer working.
Other parts in the build are:
Intel i7 3770k
2 x 4GB DDR3 1600 MHz
nVidia GTX 680
Any ideas what I can do or if its a mobo failure?
Edit: Forgot to put I am running Windows 7 Ultimate 64 Bit.

Quote from: pikka68 on 30-March-13, 01:11:43
The site msi: http://www.msi.com/product/mb/Z77-MPOWER.html#/?div=Detail
USB 3.0
• 6 USB 3.0 rear I/O ports (2 ports by Intel® Z77, 4 ports by Renesas®uDP72020
The site Renesas:  http://www.station-drivers.com/page/renesas.htm
is located : uPD720200 & uPD720200a , and uPD720201 & uPD720202
Syntax error or other reason?!    uDP----uPD
Quote from: xmad on 30-March-13, 01:19:29
I had a bunch of trouble getting my BBxII to flash with win 8.
Try opening an elevated cmd promt and manually typing the commands using the files from station drivers.
Syntax:
w200fw35 /srom 0 /writeall f401502.mem cfg.ini
if that one doest work, replace the other firmware: f302808.mem
I attached the package, just extract them somewhere easy to naviagate.
tried .. the two options .. always "dece not found"!
Syntax error or other reason?!    uDP----uPD
thanks for your help ..
Greetings ..
Pikka68

Similar Messages

  • Problem with starting msi z77 Mpower

    Hello
    i 've just bought a Cooler Master Silent Pro Gold 800W
    and a mobo msi z77 mpower(today)
    i have this problem
    i have tested the psu with 2 different mobo (the msi stated before and a asus p8z77 v pro) and in both cases the psu fan runs for few seconds and the it stops.i have tried it with and without cpu , with and without case fans , i have the same problem it turns the fans for few seconds and then it stops as if dose not have enough power.
    tested the psu with the paper clip test and it works , but when i put the 24 pin connectors and the 8 pin connectors on the motherboard it dosen't. Maybe i do something wrong ?
     I've  speak with tech support from cooler master and it seems it's not the psu
    honestly i don't know what eles to try /do
    can you help me?
    thank you in advance

    To go a step farther, when the board is outside of the case, you should have a monitor connected to the onboard graphics or a discrete card, 1 stick of RAM in the primary DIMM slot, and CPU with it's cooler for initial startup. Be sure to test on a non conductive surface of unprinted plain cardboard or an untreated wood surface.

  • Problems with Big Bang Fuzion

    I have been having a world of problems with this motherboard. It a long story but I will start with what is going on now.
    The machine has some of the strangest behavior.
    10-30 minute boots.
    This happens every time I boot the machine after the first re-boot after installation of the operating system.
    there is one thing that will help, that is to boot into the recovery console and execute
    bootsect /nt60 all
    This only works once and then after the next reboot, back to 10-30 minute wait. The machine will sit that log at the windows loading screen, as the windows logo glows in and out.
    asdf
    The next problem is periodically the mouse will become choppy, and the sounds cut out. This also happens when drivers are being installed. Everything freezes, the keyboard num lock light stops responding, the mouse stops responding. Then after a few moments everything resumes back to normal. This happens no matter what driver installs. NIC, chipset, Video, Sound, Raid, etc.
    Also the machines performance is just not that what my hardware should be. On the FFXIVBenchmark, my machine scored a 1000, when it has scored a 3000 before.
    So those are the issues that are happening now. Now I would like to describe the history of the machine.
    I have been troubleshooting this machine for well over 5 months, so if I lack details, it is due to exhaustion.
    First I installed windows 7 Ultimate 32-bit back on 2/22/2010. I was getting BSODs during install. I ran Memtest 86+ and the RAM would fail I had the RAM replaced, with the same kind and re-installed. The problems were gone for a while. I enjoyed Half Life 2 at 120 FPS, and started playijng GTAIV at full specs and would get 30-40 FPS.
    Then I wanted to take advantage of final 1GB of RAM and installed 64-bit. Here is where the problems started (I have installed 32-bit recently and the same problems exist) First the machine was unbearably slow at install. The mouse was choppy, and the install never made it past expanding Windows Files after 12 hours.
    I installed an additional hard drive, and installed the boot partition there, and the system partition on the RAID0. Things would work for a bout a month and then the machine would BSOD more and more often. Pretty soon the BSOD's were durring boot. I ran another MEMTEST and the new memory failed again. OCZ tech agent said that I needed to use the Low Voltage version. OCE replaced my RAM with the new LOW Voltage ram.
    Things did not get any better. BSODs continued to happen. So I installed WHOCRASHED and within 24 hours, 12 BSOD, 9 of them NTOSKERNL is to blame.

    One thing to note, my copy of Windows 7 is from an MSDN subscription. I re-downloaded the disc and verified that the ISO was the correct SHA1 checksum from the MSDN store. Burned the ISO, verified the burn. The exact same disc was used to upgrade my wife's machine from VISTA to windows 7 and there has been no problems.
    Here is the troubleshooting done then.
    https://docs.google.com/document/pub?id=153XmmkyBB4r5y9G99jBjDP_J5wRl3N4Epdhuu9q2zgw
    durring the time I was troubleshooting with MSI, the motherboard would no longer POST. the CPU PHASE indicator would say "F"
    After the RMA of the motherboard, the problems I am having now exist. and some of the same from before.
    One such problem, when only downloading the ATI video card drivers I get an error "The data passed was too small"
    Some of the things I have done are replacing the DVD drive with a known good one. Using an entirely different hard drive. Swapping memory DIMMS. Replacing the Sata cables.
    I am so tired of this machine that its hard to remember what I have and have not done. I know that I have built machines before and never had so much struggle as I have had with this one.
    The memory still passes on Memtest. The hard drives pass Western Digitals testing software. I don't know what else there is to do.

  • Potential IRQ problem with Big Bang XPower

    Is there anything I can do in the BIOS to change the IRQ for my sound card to something other than 16? 

    I can't really put it in another slot since I have 3 GTX 480's installed but before I got my 3rd 480 I had tried it in another slot and it grabed the same IRQ.  Sounds like I'm stuck with 16 for the sound card.  In regards to having any problems.  I can't say that I am but I really don't like the idea of 3 video cards, USB host controller, and a sound card fighting for the same IRQ.  It would give me peace of mind to seperate the sound card.

  • New build with big bang x-power board. Any help welcome and appreciated.

    Started new build with big bang x-power board, i7 960 processor, 3 x 4gb mushkin cl7 ram and imation m-class 128gb solid state drive running Windows 7 ultimate x64. This particular SSD is probably just temporary. Since I don't have the SSD I really want (yet) and this 1 was given to me at no cost, by a friend who really hated it, I thought it would suit my current needs. The specs & reviews were not encouraging, but they were not exactly "terrible" either.
    Anyway, I was unable to install the OS on the Imation drive, while connected to a sata2 port. Got repeat bsod despite many variations in settings, including fail safe defaults. After clearing cmos and switching to a sata3 port, I got it to install no problem after putting settings back to cpu voltge: 1.35, dram voltage: 1.65, mode: AHCI and all others: default with only 1 RAM module seated.
    So... I think this may be a BIOS issue and was hoping someone could point me to the most recent BIOS version available for me to update my BBXP board. I believe v1.6 is what i'm looking for, unless my info is outdated. Since my plan is ultimately to run the OS from an SSD using a sata2 port, I definitely want to resolve this, and hopefully any other issues with the v1.0 BIOS that I just haven't encountered yet.

    Thanks again HU16E, and sorry for any confusion and/or lack of information. I'm guess you can tell i'm still new at this, but I'll try to do better with specifics in the future   -please forgive me.
    SSD = Solid State Drive. The brand of this particular solid state drive is "Imation" and the series is "M-Class." It is a sataII device that would not install the OS while connected to any of the sataII ports on the board. Initial attempt was made with all settings on auto. When that didn't work, I adjusted voltages because it seemes unstable with repeat freezes and restarts. The install seemed to start ok with adjusted voltages but still would not complete.
    I then moved the sataII drive to a sataIII (marvell) port, put all settings back on auto and the install went further (loaded files, copied files, expanded files, etc) but would froze several times during windows start up attempt. I then changed cpu & dram voltages back to the adjusted values I tried when the drive was connected to the sataII port and everything worked fine. Tested under load for 4 hours and no problems of any kind. Its still working now. I do however suspect I will have many more problems when I move the solid state back to a sataII port, or when I add my other Hard Disk Drives.
    BIOS version showed: 1.0.0 but i can check again to assure I didn't misread anything in my haste. If i'm mistaken, I will post the correction. Hope I answered everything the way you wanted & didn't just make matters worse and more confusing  lol.  thanks for the link as well, i'll check on it asap

  • Problem with Xsan 2.1.1 and Mac Os server 10.5.6

    Hi,
    We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
    - We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
    - We have some problems, one of them is:
    odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
    This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
    - Another problem is with AFP service, suddenly the service stop, and the error is :
    mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
    -What of the meaning of (ipc/send) invalid port right??.
    And the last error is:
    -com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
    Need Help please!.

    My configuration:
    - Master Directory:
    Hardware Configuration:
    Model: Xserve
    Processor: 2x2,8 Ghz Quad-Core Intel Xeon
    Memory 8 Gb
    Disk: 70,04 Tb
    Software:
    Kernel Version: 9.6.0
    System Version: Mac OS X Server 10.5.6
    Xsan 2.1.1
    Services: AFP, DNS, Open Directory RADIUS
    Status: connected Users: 37
    This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please?

  • Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
    First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
    The next issue is iMessage as that's playing up and wifi drop out
    Good luck

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Problems with creation of catalogue XPGrpwise and temporary

    Problems with creation of catalogue XPGrpwise and temporary files.
    I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
    Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
    Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

    Cvetaev,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

    Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

    Contact iTunes Store Support.

  • I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Performance Problems with MS IE 6.0 and EP 7.0 (2004s)

    Hello,
    we have a problem with ie 6.0 webbrowser and EP 7.0 (2004s). When we open for example the theme editor in the ep-system-administration site we must wait with MS ie 6.0 webbrowser ~ 18s for the site opening. With firefox 2.0 we can open the theme editor with ~ 1s.
    Have/Had anybody the same problem? - Or is this a knowing problem with ie 6.0.
    We used for the network analyse the tool: httpwatch 3.2. We can see, that the ie 6.0 must wait into the all-time of 18sec. 13sec for opening the site: emptyhover.html.
    - Thanks in advance for a tip !
    Best Regards,
    Ralf

    Hello Ameya and hello Shao,
    we use the version SP12 NW 2004s. We have the this problems with a base application of portal: theme editor.
    We can see in the httpWatch 3.2 analysis tool, that the ie 6.0 load a much of cache files from the client webbrowser. Could it be this problem? - I red in this forum problems with the webbrowser-parameter: "Empty Temporary Internet Files folder when browser is closed"
    Thank you for your helping.
    Best Regards,
    Ralf

  • I have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending

    i have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
    Also the mail is acting very funny by not getting the rules work in a proper method.  Is ther a software to repair mail.

    i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check. 
    This problem just started for about 3 to 4 days now.  earlier it was working normally.

  • Problem with installing Photoshop elements 9 and adobe support advisor

    Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
    I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
    I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
    cpsid_82829s5 Missing installation file bootstrapper error occured
    with this code for a support from adobe 00-67325-032018052012
    I unistalled it and retried, but nothing.
    Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
    Thank you

    In the error message it doesn't tell me
    "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
    neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
    and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
    Messaggio originale----
    Da: [email protected]
    Data: 18/05/2012 22.20
    A: "Questionlady"<[email protected]>
    Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
    Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download &amp; Install FAQ - View the full discussion
    Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor?  If so can you please list each step and the result of those steps.  This will allow us to best advise you on your next steps.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Trial Download &amp; Install FAQ by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for