Problem with BIS & OWA

Hi, I have a problem with the setting up of an OWA account on BIS website. I think my only fix may be to change my email address formatting but I do not want to nor should I have to as this has been our email setup for years. It would be appreciated if someone has another method or someway of telling Blackberry to fix the website.
The problem is that my user's email format is [email protected] When I enter this in the OWA account setup page it attempts to authenticate the login using the http://mail.somesite.com/exchange/joe.blog url which is OK but it uses the joe.blog as the user's domain login which it is not correct. The login name is Joe Blog.
I can see in my event viewer where BIS has attempted to log in with joe.blog and of course is being denied access.
I would appreciate any feedback. TA

I don't know if BIS supports this ... If you can get it to connect I think you can get it to work ... you should be able to enter a different username from email name.
If you've found a solution through a post; please mark it as a solution.
If someone's was particularly helpful, give them kudo's!.
Get busy living, or get busy dying.
http://blog.port3101.org/hdawg/

Similar Messages

A problem with BIS

Hey,
I've recently started using social apps a lot(things like Facebook, Twitter and Tumblr) but I've been having an annoying problem, whenever I disable wi-fi and use 3G, the apps don't work and I get an error that says
"You are currently on a data plan that does not support this application. If you want to use this application, please connect to a Wi-Fi network or contact your service provider to upgrade your data plan" Blackberry Messenger and the web browser works except the social apps.
I live in Saudi Arabia, my carrier is STC and I have the BIS plan it offers(there is only one) Many people have said that by calling their carrier, they usually fix the problem and it starts working but when two of my friends tried to, it didn't work so I didn't bother wasting my time.I've also heard its because that all network traffic in the country is monitored, and thus browsing has to pass by the local proxy, which is a function that doesn't exist with BIS servers.

You need to make sure you PIN of the BB is registered with the new account, and your emails are setup there.
http://eu.blackberry.com/eng/support/blackberry101/email.jsp
But also, make sure Orange provisioned the BlackBerry Data Plan to the account, sometimes people make mistakes and it might not have been activiated.
On your handset, go to Options > Advanced > Host Routing Table. Press Menu > Register. If you are set up correctly for a BlackBerry Data Plan, you should get a registration message in your Message folder within 15-20 minutes if not sooner.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Change of mobile provider has caused a problem with BIS on my bb pearl

Hi, hope someone can help.
I have just changed mobile provider from O2 to Orange via sim only contract. I had BIS set up when I was with O2 although it took approximately 2 weeks before my e-mails could be pushed to my handset. Now I am with Orange, I have asked them to set me up with BIS, but, to date, I have been unable to receive any e-mails.
Do I need to do something on my handset?
Pretty desperate for a solution as I am having to pay for BIS with Orange and am paying for something I am not able to use at the moment.

You need to make sure you PIN of the BB is registered with the new account, and your emails are setup there.
http://eu.blackberry.com/eng/support/blackberry101/email.jsp
But also, make sure Orange provisioned the BlackBerry Data Plan to the account, sometimes people make mistakes and it might not have been activiated.
On your handset, go to Options > Advanced > Host Routing Table. Press Menu > Register. If you are set up correctly for a BlackBerry Data Plan, you should get a registration message in your Message folder within 15-20 minutes if not sooner.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with BIS after upgrading to v5.0.0.822 (1385) :(

Hi all,
I have a Bold 9000 and after upgrading software to v5.0.0.822 (1385) my BIS start working. I do have BIS conection, however the service is turned off on the phone. How can I activate this? If try to acess to the web the web browser tries to connect to wi-fi and I cannot change the type of connection to BIS.
Very grateful for our help.
Best regards,
Bruno
Solved!
Go to Solution.

bsousa wrote:
my BIS start working.
Perhaps, you intend to say "stopped" working?
If you have a BlackBerry Data Plan on your service provider account, on your BlackBerry device, go to:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site:
From your handheld device:   http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Problem with BIS registration at mobile provider

Hello, I just bought an unlocked BB 9720, as a provider I choosed Vodafone (I live in Spain). Can I register for BIS online? I contacted vodafone, but they dont even know what it is.

Hi and Welcome to the Community!
You need to ring them back up...they certainly do know what BIS is, or at least what the specific plan they sell is required for BB devices. The person you spoke to might not be properly trained...so try someone else.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SSL client certificate problem with exchange owa

Since a week I've been having the strangest problem when trying to connect to an exchange webmail server.
When I try to log on to the server, I now get a a safari warning telling me that the website requests a client certificate and prompts me to choose one.
Safari presents me with a few .mac and mobileme certificates, none of which are valid for this site obviously.
I cannot get through this dialog because it seems I do not have the required certificate.
What baffles me though, is that when I disable my mobileme settings in system preferences, safari connects to the exchange webmail perfectly without ever prompting me for a certificate.
I do not understand what mobileme has to do with this exchange server at all.
What is even more strange is that I have been having this on 4 different mac's here at home, with two different user accounts on the exchange server, and I have a family mobileme pack... so every system is a little different, but they all behave exactly the same.
Can anybody point in the right direction please ?
For what it's worth, I could have installed a 10.7.1 update on one of the systems which may have caused this, but definatly not on all 4 at the same time....
Another strange bit, when setting up the exchange server inside mail.app, it works perfectly...

Since a week I've been having the strangest problem when trying to connect to an exchange webmail server.
When I try to log on to the server, I now get a a safari warning telling me that the website requests a client certificate and prompts me to choose one.
Safari presents me with a few .mac and mobileme certificates, none of which are valid for this site obviously.
I cannot get through this dialog because it seems I do not have the required certificate.
What baffles me though, is that when I disable my mobileme settings in system preferences, safari connects to the exchange webmail perfectly without ever prompting me for a certificate.
I do not understand what mobileme has to do with this exchange server at all.
What is even more strange is that I have been having this on 4 different mac's here at home, with two different user accounts on the exchange server, and I have a family mobileme pack... so every system is a little different, but they all behave exactly the same.
Can anybody point in the right direction please ?
For what it's worth, I could have installed a 10.7.1 update on one of the systems which may have caused this, but definatly not on all 4 at the same time....
Another strange bit, when setting up the exchange server inside mail.app, it works perfectly...

Problem with forms authentication in OWA

Hi
I have a problem with exchange 2013 standard
When I enable forms authentication on OWA, after logging in I get a 404 file not found error.
Forms authentication works fine on ECP.
I noticed that the login url has a ReturnUrl on the querystring which is double url encoded.i.e. I am getting
https://centaur.patriot.local/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fcentaur.patriot.local%2fowa%2flogin.aspx%3fReturnUrl%3d%252fowa%252f%253fbO%253d1%26bO%3d1
If I unescape the ReturnUrl and put that in the browser,(like the following), it works:
https://centaur.patriot.local/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fcentaur.patriot.local%2fowa%2flogin.aspx%3fReturnUrl=/owa/?bO=1&bO=1
So either IIS is redirecting twice or the redirect url is incorrect.
Any ideas on how to fix this?

Hello,
You're right. the issue is related to IIS.
If you do not want IIS to allow doubled-encoded requests to be served, please set allowDoubleEscaping vaule to false to check the result.
-Encoded Requests" section in the following article:
http://www.iis.net/learn/manage/configuring-security/use-request-filtering
If the settings don't work, I recommend you post your issue to iis forum.
http://forums.iis.net/
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Integrate OWA 2010 with BIS

Hi,
I access my office email using outlook web access 2010 through web browser. I'm now trying to configure outlook web access 2010 with BIS but could not succeed.
Please can anyone advice how to configure outlook web access 2010 with BIS?
Cheers
Vimal

OK...so that's a different error message than first reported. Typically, it has to do with the Mailbox Name...that has always been the trickiest I've found. Also, I never could configure OWA via the BB interface to BIS. I always had to use my carrier BIS website from a PC and then could configure it. See this (the second section, where it discusses using the carrier BIS website...the first section is for the device interface):
KB03133How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
Also, some of the KB's I linked above might apply, as well as this:
KB15173Locate the mailbox name for a Microsoft Outlook Web Access 2007 email account
You also can search the public KB's to see if there are any more that might be useful to your situation.
Good luck!
KB03133How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Massive problems with BlackBerry ID/BIS/App World after provider switch

Hi,
I recently switched providers and got a bunch of different problems since then. The old provider deleted my BIS account, which of course also disabled the push mail functionality on my BlackBerry. I tried to register a new account with my new provider, which didn't work for unknown reasons. After several calls to my new providers hotline they finally suggested to reset my BB to factory default and try registering again. After the reset, pretty much the very first thing I was prompted with was the BlackBerry ID login. I used my old login and right after that, in the mail setup dialog, got the error again that there's a problem with the applications server and I can't create or login with a BIS account. I wondered how it could know my BIS account, so I did another factory reset and this time created a new BlackBerry ID. This time everything went fine, the new BIS account was created within seconds and a test mail was delivery to my device immediately. I was pretty happy, until I noticed that I couldn't restore all my data from BlackBerry Protect because of the new BlackBerry ID. Also all my apps were gone from App World, which is linked to the BlackBerry ID as well. So what I'm wondering now is
1) why is my BIS account linked to my BlackBerry ID,
2) how can I unlink it and use my new BIS account with my old BlackBerry ID and
3) if I can't, how do I get my BlackBerry Protect data and App World purchases back?
I'd prefer having the first two questions answered, because I'm sure switching providers and therefore BIS accounts is a pretty common thing, so there must be some do this right, right? I hope there's some way to fix it, because if I have to choose between "keep apps but live without email" and "have push mail and repurchase all apps", I'd probably choose Android instead.
PS: I also tried to find a way to contact RIM, so they could somehow unlink my old BIS account from my BlackBerry ID, but there's really not such a thing as "BlackBerry Support". The only thing I found was a button on the App World page for refunds etc, but even there the link was dead.
Solved!
Go to Solution.

I have no insight into if the carrier you are using should or should not be on that list. All I have is what you reported (that they can't escalate) coupled with that list...which leads me to conclude that they are not a fully authorized BB carrier. They would seem to be somehow affiliated though, since indeed you were able to set up BIS services with them. But, I do know of other carriers that are not listed...and as I recall they are something of a sub to a fully authorized carrier, and somehow provide services through that other carrier (who has the formal contract with RIM). I'm really guessing here as I have absolutely no insight into anything authoritative on this matter.
Regarding the contractually required formal support model...it works like this. You contract with a carrier for services. As part of that contract, you agree to a support model, and that support model starts with them (normally...as I said earlier, some models in some regions use service centers instead...you must review your specific documentation to know what the actual support model is for your specific contract). Consequently, all service-related support needs that you have must start with your carrier (or service center)...contractually, you are not allowed to bypass them and seek formal help direct from RIM. Hence the cost of the direct-to-RIM Incident Support system...you are electing to bypass your contract, and doing so is not "free". (There are also contracts between the carriers and RIM which further require that the carriers provide that front-line support to their end users, and provide the carriers with certain controls over some things that the end users are allowed access to...but that's just in support of the contract between you and your carrier.)
Now, in some situations (yours included, sadly), it gets even more complex. What I said above applies solely to the services you receive on your BB (voice, data, email, etc.). But, that has nothing to do with support for the device itself (e.g., warranty)...that's a separate contract, and was executed at the time of purchase between you and your place of purchase. That place of purchase (or assigned service center) is responsible for all support for the device itself (warranty, etc.). Again, this servicing (e.g., warranty) is delegated from RIM to the resellers...RIM provides zero front line support for devices, services, etc...none...all of that is contractually delegated down from RIM to various other entities (the carriers, resellers, service centers, etc.). RIM provides warranty and such, but the servicing of such is provided by others from a front line perspective...again, escalation into RIM is available to those front-line entities, but not to end users (save for the fee-based Incident Support model).
In your case, this could get quite messy. All too often, a service related issue is ignored by the carrier if they discover that they also did not originally sell the device to the end user (if they sold both the device and service, they would be responsible for all support for everything). They have a sad tendency to "blame the device" when it's really a service issue, and ignore the plea from the end user. Despicable, yes...but it happens all too often. And it get's worse...the device support entity will often likewise blame the service entity. The sad part of this bad scenario is that it's the end user who is left out in the cold with no service nor support from anyone that will actually aid their situation. Hopefully, this really poor outcome happens only rarely...but I know 100% (from reports on this forum) that it does happen more than 0%. I hope it does not come to pass for you, but I thought I'd warn you about it just in case so that you can be prepared for it.
All in all, I think what I'd suggest is that you press 1udn1 for support and escalation on this. Get them to tell you why they have no escalation path since, as far as you understand, they are 100% responsible for all of your service-related support, and that is exactly what this situation is, and they need to resolve it for you one way or another. Escalate with them to managers with them...the front line folks you reach likely won't have any authority to do anything "off script"...and you'll likely need that. Stress to them that you PAY THEM for your services and service-related support...and right now they are delivering neither to you, yet you continue to PAY THEM. Get them to reveal why they have no escalation capability...and see if they will reveal that they are sub to another carrier who does have that capability, and see if you can escalate that way.
You also may want to contact your former carrier...perhaps they did not fully release something related to your BB/BIS account, and that is what is preventing it from migrating to your new device? It is quite normal to migrate a BIS account from device to device (15 in one year, as I recall), so that one can retain their AW purchase records and such. This holds true crossing carriers...indeed, I've had one BIS account for years, and it started on one carrier and is now on a different one, and all my things are properly intact. Something is wrong "inside" preventing yours from doing so, and that needs attention "inside" to resolve for you.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Problem with file permissions

Hello all,
I am making a simple HttpServlet, which takes input
from html page and saves in to a file, but I'm having a
bit of a problem with file permissions.
I'm getting the following exception
java.security.AccessControlException: access denied (java.io.FilePermission ./data/result read)
     java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
     java.security.AccessController.checkPermission(AccessController.java:427)
     java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     java.lang.SecurityManager.checkRead(SecurityManager.java:871)
     java.io.File.exists(File.java:700)
     SyksyHTTPServlet.doPost(SyksyHTTPServlet.java:31)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)The exception seems to occur when I'm trying to check whether the file already
exists or not.
The data directory has all permissions (read, write and execute) set for all users,
and I have made an empty file called result inside the data directory for testing.
This file has read and write permissions enabled for all users.
Here's my code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.Enumeration;
import java.util.List;
import java.util.ArrayList;
public class SyksyHTTPServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          int totalCount = 0;
          List list;
          String song = request.getParameter("song");
          PrintWriter out = response.getWriter();
          File file = new File("./data/result");
          if(file.exists()) // this is line 31, which seems to cause the exception
               list = readFile(file);
          else
               file.createNewFile();
               list = new ArrayList();
          list.add(song);
          writeFile(file, list);
          for(int i = 0 ; i < list.size() ; i++)
               out.println(list.get(i));
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private List readFile(File file)
          List list = null;
          try
               FileInputStream fis = new FileInputStream(file);
               ObjectInputStream ois = new ObjectInputStream(fis);
               list = (ArrayList)ois.readObject();
               ois.close();
          catch(Exception e)
               e.printStackTrace();
          return list;
     private void writeFile(File file, List list)
          try
               FileOutputStream fos = new FileOutputStream(file);
               ObjectOutputStream oos = new ObjectOutputStream(fos);
               oos.writeObject(list);
               oos.flush();
               oos.close();
          catch(Exception e)
               e.printStackTrace();
}I'm using Tomcat 5.5 on Ubuntu Linux, if that has anything to do with this.
I'll appreciate all help.
kari-matti

Hello again.
I'm still having problems with this. I made
a simple servlet that reads from and writes
to text file. The reading part work fine on my
computer, but the writing doesn't, not even
an exception is thrown if the file exists that
I'm trying to write to. If I try to create a new
file I'll get an exception about file permissions.
I also asked a friend of mine to try this same
servlet on his windows computer and it works
as it should.
Here's the code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ReadServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          String s = "";
          PrintWriter out = response.getWriter();
          String docroot = getServletContext().getRealPath( "/" );
          out.println("docroot: "+docroot);
          File file = new File(docroot+"test.txt");
          if(file.exists())
               s = readFile(file);
               out.println(s);
          else
               out.println("file not found");
               //file.createNewFile();                    // causes exception
               //out.println("new file created.");
          writeFile(file, "written by servlet");
          out.println("Now look in the file "+file.getPath());
          out.println("and see if it contains text 'written by servlet'");
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private String readFile(File file)
          FileInputStream fis = null;
          BufferedInputStream bis = null;
          DataInputStream dis = null;
          String s = "";
          try
               fis = new FileInputStream(file);
               bis = new BufferedInputStream(fis);
               dis = new DataInputStream(bis);
               s = dis.readLine();
               fis.close();
               bis.close();
               dis.close();
          catch(Exception e)
               e.printStackTrace();
          return s;
     private void writeFile(File file, String s)
          FileOutputStream fos = null;
          BufferedOutputStream bos = null;
          DataOutputStream dos = null;
          try
               fos = new FileOutputStream(file);
               bos = new BufferedOutputStream(fos);
               dos = new DataOutputStream(bos);
               dos.writeChars(s);
               fos.flush();
               bos.flush();
               dos.flush();
               fos.close();
               bos.close();
               dos.close();
          catch(Exception e)
               e.printStackTrace();
}And if someone wants to test this servlet I can
give a war package.
Any advices?
kari-matti

Problems with a shared calendar using Outlook 2007 and Exchange 2010

Hello all,
We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
I realize this is a big mess, and your help would be greatly appreciated.

Hi Nigel,
How is the impact, just one user or all users, Outlook or OWA?
If just one user, it seems like an issue on the Outlook Client side.
Please trying to re-create new profile to fresh the caches.
Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
Found a similar thread for your reference:
Calendar Sharing not available error message
http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange 2010 : Doubt with recipient type and problem with disappearance of the original recipient in the mail relay

Hello. First of all, thank you very much for your attention.
After that, I will expose the problem:
I have a user domain called "comercial" with a corresponding mailbox "[email protected]"
. This user
has assigned multiple emails such as "[email protected]", "[email protected]", "[email protected]" , having as default email "[email protected] ".
On
the other hand,
another domain user
called
"menganito" with it's mailbox "[email protected]" account, also has a few mail accounts "[email protected]", "[email protected]", " [email protected]"
...having
as default email "[email protected]
The user "Comercial" is forwarding
all of it's mails to the user "menganito".
The problem is that "menganito" is not receiving the exact
"comercial"
sender email, but the email which appears by default ("[email protected]").
"Menganito" would like to know
from which email exactly the mails he is receiving have been sent ("[email protected]",
or "[email protected]"
or "[email protected]").
Also, he would like to knowthe email of the original sender (from the outside of the domain) whom the user "Comercial"
have received the email from.
In another type of email servers (Kerio,...)
this is not a problem, because forwarding by
defaultis always showing
the original sender and original receiver.
Maybe the problem comes from the recipient type I'm using.
Should I use another type of recipient? should I use a transport rule?
Any idea ? Thanks again in advance.

Hi Simon. First of all thanks for your answer.
This happens with all accounts. I tried with news accounts and different browsers for OWA and Outlook anywhere and happens the same. Is not a cache problem
The problem is
when "[email protected]"(default
and set as default answer
account by
exchange)
receives
a message in "[email protected]" when
forwards to "Menganito"
this message will appear from"[email protected]"
instead of "[email protected]".
This happens with all accounts.
I can understand that i can't avoid
default reply address on the same
domain, but also with different domains happens
the same?
The platform is only one clean and updated server 2012 as dc and another clean and updated server 2012 with exchange 2010 sp3 directly and after rollup 4 for exchange SP3, no previous versions and servicepacks of exchange 2010 was installed before. Before
install exchange 2010 sp3, i installed all the filterpacks (3) and .net 3.5 and all updates that i finded for 2012 server (i tried for 2 days): No more updates for sure. After, in powershell, i put this:
Add-WindowsFeature NET-Framework-Core,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,Web-Mgmt-Tools,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy
-Restart
The machine and exchange works good (i3 with 4gb ram, and raid 1 1tb of HD) and the organization only has 15 mailboxes. No problems with even viewer and all is correct.
Thanks again.

Exchange 2010/Outlook 2010 Security Alert (...there is a problem with the site's security certificate.)

I've been looking to resolve this issue for a while now and was hoping someone could help me understand my options.
We have Exchange 2010 & Outlook 2010 in our environment. I've created a SSL cert for our ActiveSync from a reputable CA and unfortunately, as you may not be surprised, we are seeing an alert each time we open Outlook that states:
"Security Alert; Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
The name on the security certificate is invalid or does not match the name of the site."
Of course my internal server name does not match my external server name. So the SSL I had created for use with OWA and ActiveSync is rejected by my internal Outlook clients.
After doing some research I believe this is related to the Autodiscover service being configured with my internal server name and not my external name.
I've found some info about adding New-AutodiscoverVirtualDirectory and Set-ClientAccessServer commands and then found this article that might help. (Configure
Outlook Anywhere to Use Multiple SSL Certificates) but nothing is specific to my configuration and I'm concerned about what will happen to my existing configuration if this fails.
What happens when you run Set-ClientAccessServer? Does it retain and keep the old server config in place and add a new one or does it wipe it out? Will all of my devices need to be reconfigured?
Same with New-AutodiscoverVirtualDirectory. Does this simply add another virtual directory or is it going to overwrite my existing config?
Then there is the question of whether or not any of this will actually address my issue at all.
absolutezero273c

Sorry.
"[PS] C:\Windows\system32>Set-ClientAccessServer -Identity MailExt -AutoDiscoverServiceInternalUri "https://MailExt
.contoso.com/autodiscover/autodiscover.xml"
The operation couldn't be performed because object 'MailExt' couldn't be found on 'DomainController2.contoso.local'.
+ CategoryInfo : NotSpecified: (0:Int32) [Set-ClientAccessServer], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 4D980455,Microsoft.Exchange.Management.SystemConfigurationTasks.SetClientAccessServer"...is the error I get.
I've created the split zones and populated the Forward Lookup Zones as follows:
CONTOSO.COM
MailExt(CNAME)MailInt.contoso.local
_tcp _autodiscover(SRV)MailExt.contoso.com
CONTOSO.LOCAL
MailInt(A)192.168.1.10
MailExt(CNAME)MailInt.contoso.com
One thing I did notice is that there isn't a _tcp _autodiscover entry for MailInt in my Forward Lookup Zones. It was recommended that I make that entry for _tcp _autodiscover(SRV)MailExt.contoso.com in another post I read somewhere.
I believe what I am trying to do is create a new autodiscover object as is shown here:
I see there is a Get-ClientAccessServer & Set-ClientAccessServer command but I need to add a CAS. Does the Set-ClientAccessServer add or simply modify?
Or would that require the New-AutodiscoverVirtualDirectory command? I read
this page that discussed creating new virtual directories but that seemed a little risky without knowing all the ins and outs of how this service functions and to what degree this would affect the existing configuration.
I was able to use the Set-ClientAccessServer command and change the actual internal autodiscoverUri to https://MailExt.contoso.com/autodiscover/autodiscover.xml but the name still says MailInt and I continue to get the SSL cert warnings because it is looking
at MailInt.contoso.local.
absolutezero273c

Weird problem with BBM

hi there,
I got my Z10 in the UK a few days ago (SIM free)
i used it there on my orange (with BIS service) and worked AMAZING i love it
Now i am back to Israel
I put my simcard and everything works great! even app world
but not bbm!
talked to my carrier they said they will reset everything, tried that twice and didnt work
i put my simcard in an adapter and put it in my 9900 and bbm is working and got the bb icon next to the network signal!
put it back into my z10 and nothing! wtf ! driving me crazy
i tried to turn my z10 on without a simcard and connected to wifi and bbm works!
as soon as i put my simcard bbm stops working
any ideas?
thanks for the help
Rasheed

rasheedn wrote:
i gave them my imei and they still didnt figure it out
Have you called them again? "They" need to figure this out. It's not a BlackBerry problems.
ALSO: You have your mobile phone number listed as your "My Mobile Provider" or carrier. Putting your phone number out on the internet on these public forums for the world to see, is not wise. To change that, at the top of this page click on My Settings > Personal Profile > Personal Information, and in the entry block for "Carrier" type the name of your mobile provider.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with BIS & OWA

Similar Messages

Maybe you are looking for