Problem with BizTalk server 2013 SFTP adapter on Cloud VM

All,
We have deployed Microsoft Biztalk Server 2013 Enterprise edition on a cloud VM. We are facing an issue with SFTP adapter to receive. Following are the details;
On this VM, we are facing an issue with BizTalk server 2013 SFTP adapter. The SFTP location can receive and send message through SFTP clients and .Net code. But using BizTalk server 2013 SFTP adapter we are only able to send the file on SFTP location but
could not receive the files from same location.
We are getting just one line error in system event log that is :
Event#7011. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BTSSvc$BizTalkServerApplication service.
Regards,
Shoaib Danish

Hi
BizTalk Server 2013 is available on Windows Azure. BizTalk Server 2013 can be installed locally on your hardware
and in Windows Azure as a virtual machine. Please follow the procedures to check it on your side.
Configuring BizTalk Server 2013 on a Windows Azure VM
Create a BizTalk Virtual Machine in Windows Azure
Create the BizTalk Group Prerequisites
Configure the BizTalk Group
Best regards
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

Hello,
We have a requirement to connect SFTP secure site with the private key and polling files. Initially I have
tested BizTalk Server 2013 SFTP Adapter receiver Port using Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
did not poll any files from SFTP Site. I added only one file to SFTP Server ( 145 kb file) for testing purpose.
However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
I could not find any errors in Event viewer also. I can download\upload file using WinSCP tool .
So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter is also working find
without any issues for Client SFTP Site.
This is the configuration on SFTP Receive Adapter
This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool.
<o:p></o:p>
Appreciate your help on this.<o:p></o:p>
Thanks<o:p></o:p>
PrabathD<o:p></o:p>

BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
Set your poll interval to a non-zero value and check the behavior.
Regards.

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Lync HP 4120 Sign in problems with Lync Server 2013

Hi, this is my second request for help, this with more information...
I`ll ready install the follow infrastructure: (I change the name of my organization for contoso)
Lync Server 2013 Installation with Enterprise mode with 1 front end : Pool: lync.contoso.com Front End: lyncfe01.contoso.com Back End: lyncsql01.contoso.com
I`ll ready install a PKI infrastructure with two tiers, the root offline and the subordnate ac.contoso.com
This with the defailt algorithm configuration RSA SHA1
My phones are HP 4120
In the Front End Server i configured the SCHANNEL registers:
EnableSessionTicket in 2
Send..etc in 0
Ok, the installation is ok, services are OK, Client login trough PC its OK, PSTN Configuration... (I can make a phonecall with the lync client of Office 365)
Commnd Checks:
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 -TargetFqdn lync.contoso.com
The result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 for
check the DHCP the result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the follow command
PS C:\Users\Administrator> $cred = Get-Credential
cmdlet Get-Credential at command pipeline position 1
Supply values for the following parameters:
Credential
PS C:\Users\Administrator> Test-CsClientAuth -TargetFqdn lync.contoso.com -UserSipAddress "sip:[email protected]" -UserCredential $cred
I got this:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:00.3431783
Error Message :
Diagnosis :
But.. when i use the same command but i remove the -targetFqdn for check the Dhcp i got this:
VERBOSE: Workflow Instance Id 'bca95636-af7b-4b0a-b43d-dba259294b2d', started.
VERBOSE: Command line executed is 'Test-CsClientAuth -UserSipAddress "sip:[email protected]" -UserCredential $cred
-Verbose'.
Target Fqdn :
Target Uri :
Result : Failure
Latency : 00:00:00
Error Message : 10060, A connection attempt failed because the connected party did not properly respond after a period
of time, or established connection failed because connected host has failed to respond 194.90.8.20:5061
Inner Exception:A connection attempt failed because the connected party did not properly respond after
a period of time, or established connection failed because connected host has failed to respond
194.90.8.20:5061
Diagnosis :
VERBOSE: Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' started.
Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' completed in '5.62E-05' seconds.
Target web service Url not provided. Will have to extract it from authentication challenge.
An exception 'Unable to establish a connection.' occurred during Workflow
Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow execution.
Exception Call Stack: at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
at Microsoft.Rtc.SyntheticTransactions.Activities.GetSTSUriActivity.InternalExecute(ActivityExecutionContext
executionContext)
at Microsoft.Rtc.SyntheticTransactions.Activities.SyntheticTransactionsActivity.Execute(ActivityExecutionContext
executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Sip.TcpTransport.OnConnected(Object arg)
'GetSTSUri' activity started.
Starting STS Uri Discovery...
ERROR getting STS Uri.
'UnRegister' activity started.
'UnRegister' activity completed in '3.12E-05' seconds.
VERBOSE: Workflow Instance ID 'bca95636-af7b-4b0a-b43d-dba259294b2d' completed.
VERBOSE: Workflow run-time (sec): 126.0548512.
The Real Problem is that my Lync HP 4120 Phone can't make a sign in, not from USB cable loging, nor with PIN authentification
When I try to make a login with the USB cable, I set the user and password and the phone says "Connecting to Lync".. "Downloading a certificate" ... "Installing certificate"... "Downloading Certificate"...
"Installing Certificate".. forever
When I try to make a login with PIN Authentification, the phone first displays the following:
Account used is not authorized, Please Contact your support team and then shows this:
An Account matching this phone number cannot be found. Please contact your support team.
The Pin authentification is enable
In the Lync Server Enable Kerberos Authentification, Enable Integrated Windows Authentification and Enable Certificate Authentification are enable
This is the configuration from DHCP
Starting Discovery ...
Sending Packet (Size: 284, Network Adapter: xx.xx.xx.xx, Attempt Type: Broadcast only)
--Begin Packet--
DHCP: INFORM (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = Xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4###--End Packet--
Received Packet
Sender:xx.xx.xx.xx:67, Size:363
--Begin Packet--
DHCP: ACK (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4100289
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) XX.XX.XX.XX
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 17) enc:0 lync.contoso.com (00046C796E6306756E69736F6E026D7800)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 86) MS-UC-Clienthttpslync.contoso.com443%/CertProv/CertProvisioningService.svcÜNAP (010C4D532D55432D436C69656E7402056874747073030E6C796E632E756E69736F6E2E6D78040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536572766963652E737663DC034E4150)
DHCP: End of this option field
--End Packet--
Result: Success
DHCP Server : xx.xx.x.xx.
SIP Server FQDN : lync.contoso.com
Certificate Provisioning Service URL : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
thanks for all, hope somebody can help me with this problem.. i am going crazy...

Hi, i connected the Lync Phone to another switch and i update the firmware to the newest firmware and i got the same problem..
The lync phone download the certificate but cant install it and the still the same error with the SIP login
An Account matching this phone number cannot be found. Please contact your support team.

BizTalk Server 2013R2 SFTP Adapter - Cipher support (BLOWFISH)

Hi,
It appears that the SFTP adapter only supports a subset of commonly used ciphers. I'm trying without success to connect to a server that is using blowfish, without success. There currently seems to be 3 options in the port config - AES, TripleDES and Auto.
I assume auto will negotiate between AES and 3DES - but I wonder if there is any further cipher support ?
Regards, Jason

Agree with you Jason and this
MSDN Blog confirms that currently supported Encryption Ciphers are 3DES and AES. It doesn't support target systems with blowfish at least in this release.
Rachit
Please mark as answer or vote as helpful if my reply does

BizTalk 2013 SFTP adapter not polling

Hi,
I am trying to poll some files from an SFTP location. I have configured my SFTP Receive Location on the BizTalk Server 2013. However I do not see any polling happening.
I have a BizTalk Server 2006 R2 environment from where I have configured the polling from the same location (this is ofcourse stopped when using the BizTalk 2013). From here, the polling is happening fine (bLogical sftp adapter).
Can you please let me know if I am missing any other steps apart from the RL configuration.
Regards,
Ujjwal
-Ujjwal

Though you have been using SFTP process with your BizTalk 2006 environment, your new BizTalk server may have new IP and new configurations. So ensure the SFTP server where
you’re trying to receive the files from allow this new server.
First try to use any SFTP client tools like
FileZilla or
WinSCP and see whether you can connect to your SFTP server. This would help you to solve some of the access issues.
Ensure your IP (external IP) is not blocked by your SFTP server. If any firewall is involved between, check this firewall is not blocking the access.
Also ensure that values you give while configuring the Security section of the Receive Location is correct. Most of the issues around the SFTP adapter trying to receive the
files are Firewall issue, Security properties configuration.
Also check
this SFTP adapter article from TechNet Wiki for more help..
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

BizTalk 2013 SFTP Adapter Dynamic SFTP send port exception: Open remote file for write error

I am using BizTalk 2013 SFTP adapter. I defined a Dynamic One-Way
send port on BizTalk server administration.
Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Server stack trace:
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker.OpenRemoteFileWrite(String fileName, Int32 fileOffset)
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpFileWriterStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
Exception rethrown at [1]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result)
MessageId: {926F44F2-9180-4B33-96FF-9E4CBC459382}
InstanceID: {36A50A7F-63C4-48D9-903D-A33C85DDAE36}
Can you please assist with explaining why are we getting this exception?
Thank you for your help.

Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Hi Yaeli1,
From the error message above, please check the permission for file writing , it seems that this issue is related to access permission.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BizTalk 2013 SFTP Adapter : Host Instance configured for SFTP Receive cause high CPU usage

Hi,
Our BizTalk 2013 Server test env have 16 GB RAM. We have one SFTP Receive Location which is using a dedicated Host instance for SFTP receive.
As soon as we start this SFTP Host Instance it starts consuming 50-60% CPU. (Even when it is not handling any file receive)
As suggested in below thread, to fix this issue, we changed the SFTP RL default configuration. i.e. Changed polling interval from default 0 sec to
10 minutes and also changed the RL Schedule window to business hours only.
https://connectedpawns.wordpress.com/2014/04/13/biztalk-2013-sftp-adapter-biztalk-host-receiving-throttled-because-processmemory-exceeded-the-configured-throttling-limit/#comment-2602
Even after changing the RL configuration , the Host Instance continuously consumes ~60% CPU.
Any suggestions to troubleshoot more on this issue ?
Thanks in advance !!
Anoop

This is one of the issue which has already been raised to Microsoft and hopefully a public build will be available soon in next cumulative update pack .
There are variety of reason for this starting for password mismatch or password not given , SFTP adapter unable to connect and so on .
There is good post here in below link for this issue
http://thoughtsofmarcus.blogspot.co.uk/2013/06/leaving-password-blank-in-biztalk-2013.html
Another greate artcicle is by Nino which states these issues .SFTP adapter is protocol sensitive and some configuration by server side, can cause a lot of crazy situations
http://ninocrudele.me/2014/01/29/checkstat-and-sftp-adapter-issues/
Thanks
Abhishek

BizTalk Server 2013 and deployment MSI with dynamic send ports

Hello community, wonder if any help out there for this odd problem.
Deployment of application msi fails into BizTalk 2013 prod environment, fails when deploying the project dll that contains all the orchestrations,
and reports a failure to apply early bindings. The only early bindings in this project are dynamic send ports. I cannot recreate the problem in in my QAS environment where deployments of the same msi works fine.
I can build an msi without any bindings at all except for the dynamically created ones, and this also display the same behaviour on import.
I have test deployed a 2nd unrelated app that also uses dynamic send ports, and this displays the problem.
Adding the assembly directly to BizTalk console displays the same behaviour.
Deployment of msi apps without dynamic send ports are ok.
The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
No specific further detail is available in the error except.
Import Wizard[09/05/2014 08:20:47]: Error in Importing Application
Import Wizard[09/05/2014 08:20:47]: Change requests failed for some resources.
BizTalkAssemblyResourceManager failed to complete end type change request.
Unable to deploy early bindings.
Failed to update binding information.
Error in the application.
Other information that may be relevant:
The main difference between QAS and PROD is that PROD is a two node cluster. Import behaviour is the same if attempted on either node. Assemblies are installed in both nodes currently.
The dynamic ports are set on handlers that are non-clustered hosts (all are for adapter type SMTP).
I have ensured that all the adapter handlers are identically setup in both environments.
The project files were migrated to BizTalk 2013 from BizTalk 2010, imported and then converted using VS 2012.
The msi has installed the assemblies as per usual and they do exist in the .net 4 gac
There is a reference to a shared resource in a different application, this application is installed and imported ok.
I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something that VS2012 didn’t handle too gracefully
when converting the project. I could move the functionality into a helper class and forget about using dynamic sends, rather not go down that route. I'm still suspecting this is small difference in setup
of the group between QAS and PROD but I can't see anything jumping out.
Any comments are most welcome.

The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something
that VS2012 didn’t handle too gracefully when converting the project.
Two things.
1. That's what I would do first, recreate (really just change and reset the properties) the Orchestration Ports in Visual Studio.
2. Probably not related but, Custom Pipeline Components should not be placed in the Pipeline Components folder. All Custom Pipeline Components should be in the GAC only. The Pipeline Components folder
is a compatibility vestige from BizTalk Server 2004.

Issue with BAM Tools configuration in Biztalk server 2013

Hi all,
When I configure biztalk server 2013 I am facing the the below mentioned warning,
I have followed the below mentioned link but still problem continues
http://social.msdn.microsoft.com/Forums/en-US/8f4833e7-89b9-41bb-bd52-c58228491cbd/how-to-restart-biztalk-service?forum=biztalkgeneral

This is a known issue. You need to install CU1 before configuring BAM:
BizTalk Server 2013 CU1
Morten la Cour

BizTalk Server 2013 R2 Orchestration as web service with untyped messages.

Hi,
I have created an orchestration in BizTalk server 2013 R2 which receives and send untyped messages to an public Request-Response port. And am trying to publish this orchestration as web service, am getting "Object reference not set to an instance"
error in the Publish Web service wizard. I didn't find any error details in event viewer.
Please let me know what is the issue with this and how resolve this.
Thanks,
Praveen
Praveen

"Object reference not set to an instance" issue +Orchestration as WCF service + BizTalk
2013 R2 ..has no relation.
Just created an Orchestration, which would accept XMLDocument as input (Request) message and output (Response) message in both BizTalk 2013 and also in 2013 R2.
I can expose the Orchestration as WCF service without any issues as mentioned here and can able to send and get any XMLDocument to this server (Which is an Orchestration)
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Migrating From BizTalk 2009 To Biztalk server 2013

Hi All,
My current solution is on BizTalk 2009 and my client is thinking of migrating to BizTalk 2013 . Please suggest me is it a good idea to migrate to BizTalk 2013.
Please provide me a difference between 2009 to 2013
Difference between 2009 to 2013 and main features.
Thanks and Regards
Dhanavel S

Hi Dhanavel,
Why don’t you think about migrating to BizTalk 2013 R2 which is available now. Anyway
First and foremost thing, BizTalk Server 2009’s mainstream support from Microsoft has ended on 08-July-2014. After mainstream support, customer will get extended support until
09-July-2019. So you're are in extended support phase now. Find out the following blogpost where you will know more about what you can get and what you’re going to miss from Microsoft support for BizTalk Server 2009. And also about what you have to do next.
Why you have to migrate to the latest version.
BizTalk Server 2009 mainstream support ends.What to do next?
Apart from losing the benefits of mainstream support against the extended support and apart from getting the benefits of latest offering/features of the newer version of the
product, BizTalk server 2009 is closely dependent on its underlying platforms like Windows Server 2008 (or Window server 2003/Windows XP-SP3/Windows Visa SP1), SQL Server 2008 (or SQL Server 2005 SP2) and Visual Studio 2008. So its high time to migrate.
BizTalk Server 2009 mainstream support ends. What to do next?
Some of the benefits of migrating from BizTalk 2009 to BizTalk 2013.
Platform upgrades:
BizTalk 2013 uses following, so when you upgrade from BizTalk 2009 to 2013, you will get the benefits by upgrading your platforms.
Windows Server 2012 (BizTalk 2009 uses Windows Server 2009)
Visual Studio 2012(BizTalk 2009 uses Visual Studio2008)
.NET Framework 4.5 (BizTalk 2009 uses .NET 3.5)
SQL Server 2012(BizTalk 2009 uses SQL 2008)
Virtualization support for Hyper-V (this feature is available from BizTalk 2010 onwards)
Some of the other benefits include
Better support to could
Azure Service Bus. And support for
BizTalk Server running on Azure IaaS
BizTalk Server 2013 Support for RESTful Services
More support towards WCF-based adpaters.
Secure FTP with new FTPS Adapter and an improved FTP Adapter
Out-of-box support to SFTP Adapter
Enhancements to the IBM Hosts Systems adapters
Update to BizTalk mapper
Updated Trading Partner Management (TPM) Capabilities.
Updates to industry schemas like HIPPA, HL7, SWIFT and SWIFTNet
Seamless ability to leverage BizTalk capabilities from SharePoint 2010 Business Connectivity Service to Line-of-Business systems
BizTalk Server setting dashboard for setting to
configuring the key performance, throttling, and tracking settings of your entire BizTalk group while offering fine grained control all the way down to the Host
Instance level.
ESB toolkit part of BizTalk installation.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

BAM Activity and view issue on BizTalk server 2013 R2 machine.

Hello all,
I am trying to make BAM portal work since couple of days but no luck yet...
I ma using BizTalk server 2013 R2.
I am trying to deploy the activity and view from my Development server to Test server ( it's working fine on Developemnt).
I have gone through one post and found this and followed steps here is the output for that :
First confirm that you can see the name of the activity in the list of deployed activity by executing this command:
bm.exe get-activities
--> I can see the activity name in there so I belive that activity is got created.
While creating the BAM activity you must have created/deployed a view get the name of the view by using this command:
bm.exe get-views -Activity:<activity name>
--> I can see the view name in there so I belive that view is exist.
You need to provide permission to the account you are using to access the BAM portal on this view by using this command.
bm.exe add-account -AccountName:”<AccountName>” -View:<viewname>
--> while executing this command is got error as :
Using 'BAMPrimaryImport' BAM Primary Import database on server 'TESTSERVER'...
ERROR: Security management of the BAM view failed.
The SQL role for the specified view is missing.
Note : My BAMAlert service is running and running using
GROUP\~biztalkservice account I am logged on Test Server using "NitinUser" account with administrator rights.
What does this mean - if this mean that I needs to give rights to my user (NitinUser) on SQL Database please tell me how to do that ? with command....
Thanks and Regards, Nitin.

Hi Nitin,
Can you try the solution as suggested by Thiago Almeida.
http://connectedthoughts.wordpress.com/2008/06/16/bam-deployment-gotchas/
His solution for this problem is to remove the view and re-add it, which worked for him. Obviously I didn't encounter this error, so have to suggest the solution from community.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Hello Ashwin,
As per that post the author was having issue that view was not created ...
also have noticed one thing that by executing following command in sql management studio.
use
BamPrimaryImport
SELECT
SUSER_SNAME(owner_sid),nameFROMsys.DATABASES
on my development box it's showing my user GROUP\nitinUser and Name = CustomBizTalkDB
but when I execute this on TEST server, entry for GROUP\nitinUser is not in database
Thanks and Regards, Nitin.

Disappearing disk space Windows Server 2012 R2 with SharePoint Server 2013 Enterprise

I've got an interesting problem with a virtual machine in our VMWare environment. It is Windows Server 2012 R2 with SharePoint Server 2013 Enterprise installed. I started out with a 60GB disk and it started running out of space, so I increased
it in VMWare and extended the partition to 100GB. Well, that lasted for a bit and so I extended it again. I've done this 3 or 4 times and now I've got a 160GB disk with about 2-3GB of space remaining (and it started with 10GB remaining).
WinDirStat shows 105GB of <Unknown> space being used, which is probably my issue. However, I can't determine what this is and it keeps growing like a tapeworm. The context menu on the <Unknown> files has all the options disabled,
so WinDirStat doesn't appear to have access to whatever the file(s) is/are. I've performed several chkdsk /f on the C: drive and nothing bad is reported. I don't have any restore points and am not running VSS (that I'm aware of). The pagefile
reports as being about 4.9GB, so that's not the issue. No large files are shown anywhere and my explorer settings are set to show me all files, including system files.
When I try to run WinDirStat with elevated permissions, it hangs and becomes unresponsive.
I've even resorted to running CCleaner to see if it found anything, but it simply found the standard temp files and such...about 1GB.
I'm pulling my hair out...and I don't have much to start with. Anyone have any ideas?
Thanks
Russ

It appears that somehow, Microsoft Fusion Assembly binding logging was turned on and many of the temp folders located at c:\users\username\AppData\Local\Microsoft\Windows\InetCache\IE were filling up with hundreds of thousands of Fusion HTM log files.
This is controlled by an entry in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion\ForceLog which was set to 1. Hopefully, setting it back to zero will fix the issue. As a result of figuring this out, I have recovered almost 80GB of disk
space occupied by the log files.
I thought WinDirStat would show me what I needed to know, but it turns out TreeSize (which I've used in the past) works much better.
Russ

AD RMS 2012 integration with exchange server 2013

AD RMS 2012 integration with exchange server 2013
I would like to have a knowledge About this Topic
1.what is differrent if we use internal SSL certificate with Public Certificate and in this case i would like to use Mobile Phone I eed to import Root Certificate ?
2.Do I have problem? If I start to install AD RMS 2012 with SQL EXpress after that I want to chage it to SQL Server ?
3.when I use SQL Expres what I can do after Disk is full (10 GB)?
4.If AD RMS is down It will affect with email that it is already sent ?
5. Which Edition of outlook can produce IRM protected documents
6. To Use AD RMS Server 2012 through OWA, Outlook and Moblie Phone ,a CAL is required or not ?

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

Problem with BizTalk server 2013 SFTP adapter on Cloud VM

Similar Messages

Maybe you are looking for