Problem with block recovery!!!

I backedup a database but,unable to backup this coz i got an error in which i found that my datafile 1 block's is currupt,then i look into session trace file in which i found that which block number has been currupt,then i recover block,but i get an error in which i see that no backupset is found to rman to recover,now i wanted to know that if i heven't a valid backup a database which block has been currup,can i recover a block? and also can backup database too???
please help me out of this i would be very thankfull of you..

You could try to repair a block with the built-in package DBMS_REPAIR.
DBMS_REPAIR
DBMS_REPAIR contains data corruption repair procedures that enable you to detect and repair corrupt blocks in tables and indexes. You can address corruptions where possible and continue to use objects while you attempt to rebuild or repair them.
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_repair.htm#ARPLS044
Joel Pérez
http://otn.oracle.com/experts

Similar Messages

Problem with Rescue & Recovery

Hi!
I have a X61 running on Vista Business. I am facing 2 problems with Rescue & Recovery:
1. RR tries to run a backup on every bootup even when I schedule it to run Monthly or Never. The program appears not to register the changes to the backup schedule. I upgraded to the latest version of RR, but it didn't help. (Note: Another user posted about the same problem (http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=604) some months back, but his problem hasn't been solved.)
2. Whenever RR tries to perform a backup, I get this error message: "R2R.exe has encountered a problem and needs to close." I downloaded the patch KB917422 but got the following message when I ran the installation pgm: "Could not find any previously installed compliant products on the machine for installing the product."
Will greatly appreciate any advice!
Puckers

First you should try to fix the bad sectors, you can use the following command:
chkdsk c: /f /r

RMAN problem with block corruption

Hi
I have problem with the block corruption in one of the database .
here is the error message .
ora-01578:oracle data block corrupted (file# 10,block # 55309) ora-01110: data file 10:
'/db/gist1/data/gist1_gis_nologging_01.dbf' ora-26040: data block was loaded using the NOLOGGING option .
gisq SQL> select * from v$database_block_corruption;
FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTIO
10 11 126 3754364971 LOGICAL
RMAN> blockrecover datafile 10 block 11;
Starting blockrecover at 14/DEC/2012 16:25:48
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of blockrecover command at 12/14/2012 16:25:48
RMAN-05009: Block Media Recovery requires Enterprise Edition
Could some one help me in providing solution for this . we we have standard addition only .
Thanks in advance ...

It appears that there was a NOLOGGING operation on an object that resides in '/db/gist1/data/gist1_gis_nologging_01.dbf' .
NOLOGGING operations, as the name suggests, do generate limited redo log, which makes the objects affected by them non-recoverable.
RMAN Blockrecover, as far as I understand, uses full and archivelog backup to perform the block recovery. Since the archivelog backup does not store any changes related to the NOLOGGING operation, then Blockrecover would not be able to help you even if you were licensed.
You can try to restore the object as of the most recent full backup…
Iordan Iotzov
http://iiotzov.wordpress.com/

Problem with blocked native processes

My application relies heavily on native processes so that I am trying to implement fallback strategies if a native process doesn't work as expected.
While creating test scenarios I had a problem with handling errors caused directly by the start() method of the NativeProcess class. It throws errors if the target process can’t be accessed or is corrupted. For example if you take an exe file in Windows that works correctly and modify it in a hex editor to corrupt it the following error is thrown:
Error: Error #3219: The NativeProcess could not be started. '%1 is not a valid Win32 application.'
      at flash.desktop::NativeProcess/internalStart()
      at flash.desktop::NativeProcess/start()
If I try to put a try-catch block around the process.start() call something unexpected happens:
The error is cought correctly, but another error is thrown instantly:
Error: Error #1503: A script failed to exit after 30 seconds and was terminated.
      at mx.managers.layoutClasses::PriorityQueue/removeSmallest()[E:\dev\4.x\frameworks\projects\ framework\src\mx\managers\layoutClasses\PriorityQueue.as:238]
      at mx.managers::LayoutManager/validateProperties()[E:\dev\4.x\frameworks\projects\framework\ src\mx\managers\LayoutManager.as:567]
      at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:730]
      at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.x\frameworks\projects \framework\src\mx\managers\LayoutManager.as:1072]
The problem with this error is that I got no idea how to catch or prevent it. Depending on what I do in the catch block there is another error. For example if I try to log the error I get (but sometimes not as instantly as above):
Error: Error #1503: A script failed to exit after 30 seconds and was terminated.
      at mx.logging::Log$/getLogger()[E:\dev\4.x\frameworks\projects\framework\src\mx\logging\Log. as:360]
Strange is that the error is fired instantly sometimes not after 30 seconds.
How can I fix this?

In the first case I used a loader to load an error image. In the second case I tried something like:
var logger:ILogger = Log.getLogger("Test");
logger.error("NativeProcessError");
I don't have the exact code at the moment, because I'm not on that computer.

Satellite C50-A-19T problem with TOSHIBA Recovery Media Creator

When i try to make Recovery dvd with TOSHIBA Recovery Media Creator the burning fails.
I have Satellite C50-A-19T with TSSTcorpCDDVDW_SU-208DB_T cd/dvd-rw unit.
During burning process i get an error that say that is impossible read the file D:\ZZImages\ZZImages\install29.swm (the .swm file in error change with different attempts).
I marked the option to verify dvd after burning.
I tried a few times: i try make a single dvd (requires 3 dvd for complete recovery).
i try 2 times with verbatim dvd+r the fist try failed, the second succeeded with the same kind of support.
i try make dvd numb. 2. for two time with dvd-r and dvd +r support and it failed again.
On windows error report i find this error:
and this alert:
+ODD Firmware Update to fix problems with the Toshiba Recovery CD creator+
I see this solution by upgrading firmware for different models of cd/dvd-rw units
http://aps2.toshiba-tro.de/kb0/TSB9C02RP0000R01.htm
but not about the model I have.
i have:
TOSHIBA Recovery Media Creator version: 3.1.02.55065006
windows 8.1 x64.
there is a solution?
is a known problem?
thanks
Elena

> I don't have a free usb drive to test the usb mode.
I would recommend you to purchase an separate USB memory stick and to create the such recovery USB flash memory media.
Please check also this different procedure described in this Toshiba HowTO
[How to create a USB recovery media flash drive from recovery ISO images- or discs (DVDs)|http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]
Feedback is greatly appreaciated

T60 problem with product recovery disks

After Installing disk 1 of product recovery I am getting a message asking for "Final C" disk. I do not have this and I can go no farther with the recovery
How can I get past this? What could be causing this?

Maybe you could provide a little more information as to how you are trying to recover your system, are the recovery discs from Lenovo or did you create them yourself?
Recovery scenario using Lenovo or self created recovery discs;
boot from the Lenovo R&R or 1st disc created, once it has loaded choose to restore system and then restore to factory settings. Make sure you read all messages carefully. If it says remove disc and turn off and then turn on your system, you will need to, after removing the disc, press the power on button untill the system turns off, then turn it on again without inserting any disc.
You may be asked for a supplemental disc. If the discs are self created you do not have this disc and you need to click on "no". If the discs are from Lenovo you may, may not have one, click "yes" or "no" accordingly. Proceed as instructed and your system will be recovered.
Edit; just had another thought, may / may not be relevant in this case - but just in case: If you are starting the system, then pressing the blue ThinkVantage button, and do not have a factory restore option; - if you can still boot into windows you need to run System Update and let it update itself. Then try the ThinkVantage button again at boot, hopefully the factory restore option will be available.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Problems with sytem recovery on Lenovo G500s

Hello, I am new to Lenovo Community.
I have purchased Lenovo G500s just two months ago. Now I am having problem with System Restore. The system is not creating any system restore on its own and when I go to System Protection under System Properties, an error message pops up. Also software like Revo Uninstaller is not able to create a restore point before uninstalling a software (it just stops responding saying creating a restore point).
I am also attaching two screenshots showing the error messages.
Link to picture
Link to picture
Please help me get this fixed as I believe System Restore is an important feature and I would be making sure that I have restore points made in case I need to restore in future.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
Solved!
Go to Solution.

Hi Debdutta,
Welcome to Lenovo Community Forums!
I’m sorry to hear that automatically “System Restore” points are not creating in your G500s Laptop, below are the steps to check and resolve the issue and make sure you un-install any third party Tuning software.
Click on Win+R key together to open Run Window.
Now type in services.msc in the search programs and files and hit enter.
Now you need to check for the “volume shadow copy” service present in the services windows.
After selecting the “volume shadow copy” service you need to right click on the service and select properties and make the startup type as automatic and start the service.
Click ok, restart the computer and check for the issue.
Hope this helps!!!
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problem with system recovery for a new hard drive in my Pavilion p6210y Windows 7 Premium 64bit

   I decided to swap out my hard drive when my computer would fail to start up or crash right after starting. Diagnostic tool at startup said the hard drive was faulty and other times I would get BIOHD-1 and BIOHD-2 errors. I replaced the old WD Caviar Blue 640GB with a new Caviar Green 1TB. I ordered and received from HP a system recovery disc set which included five discs labeled:
Use This First! System Recovery,
System Recovery 1:1,
SYstem Recovery 1:3,
System Recovery 2:3, and
System Recovery 3:3.
   After putting in the new hard drive I used the "Use This First!" disc and everything seemed to be going fine. The scene showed "Loading Windows" or something like that. After about 10 minutes the CD drive opened and the Monitor showed three images: a big green check mark which I assume meant everything was good up to that point; a graphic showing the removal of the first disc; and a graphic showing three discs to be put in. Wondering whether to put in the System Recovery 1:1 disc or the System Recovery 1:3 disc, I noticed that the drive bay closed with the "Use This First" disc still in. I managed to get the Drive to open after pressing the open button quite a few times. I closed it with the 1:3 disc and nothing happened (no light showing activity in the DVD drive). After a minute or so I managed to get the drive open again after quite a few times pressing the open button. I put in the 1:1 disc and still nothing. At this point I could only open the drive bay with a paper clip in the release hole. With the computer unresponsive and the monitor still showing the same as when the first disc came out, I decided to turn it off with the "Use this First!" disc in the drive hoping to start from the beginning again. Now the directions that came with the HP System Recovery discs state:
   CAUTION: Do not turn off the computer, or use the keyboard or mouse during this time. Doing so will interrupt or damage the software installation.
   Now when I turn the power on I get either:
the HP blue screen with the green hand, (F11=system recovery), (F9=Diagnostics), (F10=Setup) and (ESC=Boot Menu). pressing esc, F9, F10 or F11 does nothing.
Or the HP blue screen appears and then almost immediately goes to the black screen with " Reboot and select proper boot device or insert Boot media in select Boot device and press a key". I've gotten this scene while trying almost every System Recovery disc in the drive. Hitting a key does nothing other than repeating the same message.
Once I got a "The file is corrupt. The file header checksum does not match the computer checksum" error. That appeared only once in about 30 try's.
   The open DVD drive button works sometimes and not other times. I can't seem to figure out a pattern for when it will work.
   I don't know whether I might have accidentally moved the mouse or hit the keyboard during the first attempt. Can I do something to the new hard drive to get it back to a state where it can start from the beginning again? Might it be a problem other than the old hard drive. Anyone have any suggestions?

Satellite L505D-S5983
Windows 7 Home Premium 32-bit
Yes, of course! See the link to your model's spec above.
My apologies. The previous link went to a spec for the Satellite A505-S6960 (which came with Windows Vista installed). I had too many spec pages open at the same time and got them mixed.
So, are you telling me that I won't get this one to work?(the BPKT)
No. But you may face the problems that I outlined in this message.
-Jerry

HP Pavilion DV6 - problem with HP recovery - error 1005

I'm trying to format the computer and reinstall windows.
The laptop does not have a hard disk partition for the recovery. I'm using the DVD's that where made when I got the computer.
I can open the HP recovery system and get about 36% in, before i get the message: "error 1005"
I have tried several options that i could find on google like: cleaning the disc's, setting the BIOS to default, checking the disc's are DVD+R.
Someone suggested that Wireless has to be turned on when using the recovery. Mine is turned off. I can't turn on the computer and switch it on, and the keyboard button (touch button) don't respond.
Any suggestion on how to turn Wireless on, or how to fix the recovery?

Hi,
There may be a work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you have access to this, use the retail disc to perform the installation, enter the activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this is fully supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional driver can be found starting Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problem with blocking socket.getInput/Output stream :-(

Hi there!
I have a typical client/server application and the problem, that opening the streams leads to clocking behaviour.
This is how I open the streams on the server-side
sock = ssock.accept();
outStream = new ObjectOutputStream(new BufferedOutputStream(sock.getOutputStream()));
inStream = new ObjectInputStream(new BufferedInputStream(sock.getInputStream()));and this is how I open it on the client-side:
        Socket sock = new Socket(host, port);
        outStream = new ObjectOutputStream(new BufferedOutputStream(sock.getOutputStream()));
        //inStream = new ObjectInputStream(new BufferedInputStream(sock.getInputStream()));If I leave the inStreeam-Statement uncommented, everything works fine, but as soon I try to catch the input-stream both, the server and the client-side block foreever.
Any ideas whats wrong?
Thank you in advance, lg Clemens

Oh my god, what a brain-dead java-designer played with the thought tha creating a ObjectOutputStream does not lead to a flush() on the underlaying streams ???!!!
Its easy if you know the way to go (same on both sides):
1.) get the Outputstream / create the ObjectOutputStream
2.) flush the ObjectOutputStream (so that the versioning-infp etc is exchanged)
3.) create ObjectInputStream
Step 2 is just extremly stupid in my eyes!
lg Clemens

Problem with usb recovery media

Hello all,
I own a Lenovo L412. A disc test complained that my HDD is about to die, so I decided to upgrade to an SSD. I bought an SSD, an 16gb USB flash stick and an external disk enclosure. The plan was to get the OS from my R&R to the USB flash stick, replace the drive, reinstall windows from the flash disk, and use the enclosure with my old drive to copy the files I need to the new one, as long as it is alive.
So I used the thinkvantage menu to get the OS to the USB stick, it says this was done successfuly and it also does not allow me to repeat it. The problem is when I try to boot from this stick, all I get is an empty screen and the cursor blinking on the top left corner. What can I do?
Best wishes,
plutonas

Hello and welcome,
Did you prep the USB flash drive before running the recovery ceation?
New or used USB memory keys or USB flash drives require an active partition created from within Wind...
If this is the problem you may be able to rescue the flash drive by one of two methods:
1) Just set the partition active. Use the instructions in the link above, but don't clean create or format. Just select the partition and set active. Anything else will erase the drive.
2) Prepare a 2nd drive per the full set of instructions in the above link. Then just copy the contents of the 1st drive to the 2nd one.
You've already used your one opportunity to create a recovery drive, so be careful to not erase it. On some systems it's possible to do a hack to create a 2nd drive if necessary.
I can't guarantee this is causing the boot failure, but it's at least a possibility.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problems with blocking cic in pgw2200

Hi,
We have a delicat problem every day, around peakhours in our pgw2200 the cic:s is being blocked, we have configured 2000 cic:s to each AXE:s (we have 2) and have license for 2000 simultaneous calls. Last weeks our pgw2200 is behaving very strange and block cic BLK=GATEWAY, and we can't do anything it is just keep blocking more and more cic:s and will stay like this until it shots /opt/CiscoMGC/bin/startAudit.sh around 04:10 in the morning and all the cic:s are back to normal.
My question is why PGW2200 is behaving like this suddenly? It is very annoying, it is blocking cic due that we still have a lot off free ones.
Does anyone experienced this before, please help us, we don't know what to do.
/Roland Nyberg

Ok, thanx for the answer. We have in our PGW 2200:
   MGC-01 - Media Gateway Controller 2011-12-05 09:50:34.828 MET
M RTRV
   "Type:MGC"
   "Hardware platform:sun4u sparc SUNW,Netra-240"
   "Vendor:"Cisco Systems, Inc.""
   "Location:MGC-01 - Media Gateway Controller"
   "Version:"9.6(1)""
and in our AS5850:
SESTO0803-GV1#show version
Cisco IOS Software, 5850tb Software (C5850TB-P9-M), Version 12.4(15)T11, RELEASE          SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Thu 29-Oct-09 12:11 by prod_rel_team
ROM: System Bootstrap, Version 12.3(1r)T1, RELEASE SOFTWARE (fc1)
ROM: Cisco IOS Software, 5850tb Software (C5850TB-BOOT-M), Version 12.4(15)T1, R         ELEASE SOFTWARE (fc2)
SESTO0803-GV1 uptime is 1 week, 3 days, 6 hours, 33 minutes
System returned to ROM by reload at 03:23:06 CET Fri Nov 25 2011
System restarted at 03:24:47 CET Fri Nov 25 2011
System image file is "disk0:c5850tb-p9-mz.124-15.T11.bin"
Last reload reason: Reason unspecified
Cisco c5850 (BCM1250) processor (revision 0.255) with 917504K/131072K bytes of m         emory.
Processor board ID JAB104005CZ
SB-1 CPU at 650MHz, Implementation 1025, Rev 0.2, 512KB L2 Cache
Last reset from Mbus reset
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1944 terminal lines
62 Channelized E1/PRI ports
1 Channelized STM1 port
507K bytes of NVRAM.
62592K bytes of Compact Flash card at slot 0 (Sector size 512).
16384K bytes of Flash internal SIMM (Sector size 512k).
Configuration register is 0x2102

Major problem with HDD recovery

Also, first i Would like to mention, that i have done this all thing with reinstalling Windows 7, through HDD recovery about 5-6 times before...so i know how to do it. The laptop is Satellite L650 10-D with Win 7 Home Premium(well, i', 99% it;s Home Premium...). Before couple of days it was too slow, it wasn;t even capable to open a word file... the whole computer blocked when i Opened Google Chrome..WOW...then i decided that it's time for reinstal. Well i done it. but it was still slow. Very slow. It wasn';t even capable of updating Winodws! It was loading about 5-6 min to open the creen where i must write down my password...(i'm now sure how it's cold). Then i reinstallted it second time...again slow...third time...again slow. Now i ca;t load windows, can't even load the Repair Menu throught F8..it's thinking about 40 minutes and nothing. Any ideas. How can i fix this? I tried with Windows 7, on a disc but i could install it...

Try to reinstall your firmware.
If this post was helpful, thank me by clicking the Kudos! star.
If you want to thank someone, just click on the blue star at the bottom of their post

Problem with Rescue & Recovery partition

Hi,
I have a problem wit my Lenovo 3000 V200.
The hard drive had bad sector on the end of C partition.
So, I bought a new hard drive.
I connecter it as an external drive.
With a utility of copy partition, I copied the partition ServiceV002 from the old disk to the news disk.
I can't copy the partition C: because there are bad sector.
After, I connected the new hard drive into the laptop.
I try to boot and use Recovery System, but It doesn't work.
I have no DVD of backu, So can I do to use the partition ServiceV002 to restor my computer as a new computer
In advance, Thanks for your help

First you should try to fix the bad sectors, you can use the following command:
chkdsk c: /f /r

Problem with HP Recovery Manager

Hi,
I have a new Windows 8 HP laptop and I am trying to create the recovery disks. After being frustrated to find out that the USB drive that I have won't work (it is Windows 8 compatible), I went with optical drive. The program recognizes the drive and says that I need 6 disks, but it stalls when I put the disk in. I get a message saying, "The insterted media is not supported!!" I am using the recommended DVD+R, which my drive can read, and this is the same media that I used to create recovery disks for my old Windows 7 machine. I just want the recovery disks, why is this so difficult?
Ian Brown

Not much help, as we are in the same boat.
I backed up all our files to DVDs, and trying to get them off now is a real headache.
I have spoken to customer support - on the phone and online - and they both tell me I need to take it to a local back up business and get them to recover them as "we do not support on how to recover files from the backup. You need to contact any local backup centre for the same."
I was then told "Once the files are backed up, you could copy back the files from the destination to the required location." - but since they are formatted by using the recovery manager - this also doesn't work.
Just now 'However, there is no option on how to recover the backup files in Windows 7.'
So basically... Im/we're screwed!

Problem with block recovery!!!

Similar Messages

Maybe you are looking for