PROBLEM WITH BLUETOOTH AUDIO DEVICE,BLUEANT T1

MY Q5 IS NOT RECOGNISING NOR PAIRING WITH MY BLUETOOTH DEVICE,WHAT CAN I DO?

Hi
 With my Jabra speaker/micro I had to use a reset proceedure for it (Jabra). The problem was not with my Q5
Good Luck

Similar Messages

  • There's a problem with your audio device.

    Please help. I don't know what the problem is!

    i cant figure out what to do, everytime i call someone, it says "theres a problem with your audio device."

  • Problem with USB audio device

    Hi all
    I have many problem with a USB device sound, i have a plantronic headset with a usb adapter to connect on my macbook pro, I have already this problem in the past but i have found a astuce to fix this problem. Before, when i'm on teamspeak 2, 3 or other software to capture audio with my headset, after 10 minutes, the sound make noise and i have a robotic voice... Since mac OS 10.5.7 apple have change the USB audio driver. i have found on internet the previous driver and change it on mac os X but since the new mac os 10.6.5 the problem com back with the previous or the new driver audio. I don't know if other people have this problem but this is very annoying.
    I have test my device on windows with boot camp many hour and nothing, no problem of distord sound or robotic voice.
    PS : I'm french and my english can be bad, sorry for that.

    Apparently, your previous search for audio issues in these forums missed this one: http://discussions.apple.com/message.jspa?messageID=12574650

  • Master gain problem with Direct Audio Device: distorted sound

    Hi everybody,
    I'm in a bit of a fix here. I've got an application that plays music. Developped with 1.4.2, got it working.
    However, when I run it with the the latest 1.5 release (5.0 update 6), the sound is distorted. More specifically, though I'm not entirely sure, I'd say it's the bass that gets distorted. By "distorted" I mean it's shrieking, scratching instead of... well, sounding.
    I'm using the FloatControl.Type.MASTER_GAIN control to change the "volume". Since it's playback, I'm using a SourceDataLine, and that one ain't got no VOLUME control. Now the problem only appears when I'm amplifying the audio data, i.e. when the MASTER_GAIN's value is greater than 0.0 decibel.
    Inverstigating a little more, I found out that 1.5 is using the "Direct Audio Device" Mixer as default as opposed to the "Java Sound Audio Engine" used by 1.4.2. If I force the use of the Java Sound Audio Engine with 1.5 (getting the line from the appropriate Mixer), the sound is OK. However, since the application is intended to be cross-platform, I'd prefer not to impose any such specific behaviour (plus the performance of the Direct Audio Device is twice as good).
    Tested on Linux version 2.6.11-1.1369_FC4 and Windows NT.
    Looked at www.jsresources.org, but didn't find any information specific to this problem.
    Bugparade: no hits.
    I'd be glad if anyone could help me on this.

    Nobody ?
    It narrowed it down to the following testcode. Please try to run it with Java 1.5 and some compatible audio file (a WAVE file, for instance):
    import java.io.*;
    import javax.sound.midi.*;
    import javax.sound.sampled.*;
    import javax.sound.sampled.spi.*;
    * @author  futt
    public class SoundTest {
        public static void main(String[] args)
        throws Exception
            if( args.length != 1 ){
                System.err.println("SYNOPSIS: SoundTest [FILE]");
                return ;
            final File f = new File(args[0]);
            AudioFileFormat aff = AudioSystem.getAudioFileFormat(f);
            Mixer.Info mymixer = null;
            Mixer.Info[] mixers = AudioSystem.getMixerInfo();
            for(int ii = mixers.length; --ii >= 0; ){
                if( mixers[ii].getName().toLowerCase().indexOf("direct audio device") != -1 ){
                    mymixer = mixers[ii];
                    break;
            Line.Info info = new DataLine.Info(SourceDataLine.class, aff.getFormat());
            SourceDataLine line;
            if( mymixer != null ){
                Mixer m = AudioSystem.getMixer(mymixer);
                if( m != null ){
                    System.err.println("Using mixer: "+m);
                line = (SourceDataLine) m.getLine(info);
            else {
                System.err.println("Using default mixer");
                line = (SourceDataLine) AudioSystem.getLine(info);
            System.err.println("Got line: "+line.getClass());
            InputStream in = null;
            try{
                in = new BufferedInputStream(new FileInputStream(f));
                line.open( aff.getFormat() );
                line.start();
                FloatControl fc = (FloatControl) line.getControl(FloatControl.Type.MASTER_GAIN);
                fc.setValue(3f);
                byte[] buf = new byte[ 1 << 14 ];
                for(int read; ! Thread.currentThread().isInterrupted() && (read = in.read(buf)) != -1; ){
                    line.write(buf, 0, read);
                if( ! Thread.currentThread().isInterrupted() ){
                    line.drain();
                line.stop();
            catch (Exception x){
                x.printStackTrace();
            finally {
                line.close();
                if( in != null ){
                    try{ in.close(); } catch (IOException iox){}
    }

  • Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

    Hi all,
    I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
    Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
    I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
    All help would be appreciated, looks like I'm going back to 10.5.1 though.

    Hi !
    Still no answer from M-Audio but it seems that they are not in cause.
    I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
    I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
    Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
    As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
    But two questions still remain :
    Why one USB port of the MacBook and not the other one ?
    Why since 10.5.2 ?
    Steve, if you hear me ;o)
    'Hope they will react quickly !

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • Any new  about updating lion to 10.7.4 and problems  with bluetooth devices  like Bose Soundlink Bluetooth Speaker?

    Any new  about updating lion to 10.7.4 and problems  with bluetooth devices  like Bose Soundlink Bluetooth Speaker?

    Monroe
    Just in the moment i updated to lion 10.7.4  my Bose Soundlink Bluetooth  stop working as  good as it was. I´m gonna try the update in the Bose  web page. I hope  it works

  • ITunes crashes with BlueTooth audio - JAMBOX

    iTunes freezes and crashes with error code 13014 when trying to launch while a BlueTooth audio device is tuned on - in this case, a Jawbone JAMBOX.  It can pair successfully, but connection can be intermittant and often a reboot is needed for the connection to stabilize.  iTunes has worked okay when the Jambox is in MONO mode over BlueTooth, but when it is in STEREO mode, the Jambox crashes iTunes.
    Anyone know anything about the JAMBOX used with iTunes, or more specifically, with a MBP early 2011 running Snow Leopard 10.6.8 and iTunes v10.4 ?
    Thanks

    I have also had this problem with my MacBook Pro.  It's not all the time, but often with Jambox on, iTunes freezes.  Turn it off, and iTunes plays just fine.  Also get awful quality when trying to use Jambox with some feeds from Firefox.  From the comments of others, this seems to be an Apple problem rather than a Jambox problem.  Any thoughts?

  • G580 + Win8.1 - problems with Bluetooth drivers and Dolby

    Hello
    When I bought my Lenovo G580, it had Win8 installed but I had to upgrade to Win8.1 (sadly). I've been having problems ever since. 
    When I open Lenovo Solution Center, it shows errors with these drivers: 
    Bluetooth Audio Device
    Virtual Bluetooth Support (Include Audio)
    Bluetooth LWFLT Device 
    Status: Deactivated
    In Device Manager there's a yellow error thingy on Bluetooth Audio Device. It says something about code 10. It also says it is updated to the newest version. I checked Lenovo's website (just in case) but there's no newer driver. 
    Second problem is with Dolby Advanced Audio V2. I've tried uninstalling it, reinstalling it. Uninstalling Conexant Audio Driver, reinstalling, etc. Nothing works. After a few days after upgrading to Win8.1 the first time my pc went totally crazy. Nothing was working, so I had to revert back to Win8 but was forced to upgrade again. I haven't done anything after the last upgrade because I don't know what to do. Hope someone can help. 

    hi jonhildelia,
    Welcome to the Lenovo Forums.
    For the bluetooth, can you try the following (after upgrading the machien to Win8.1):
    1. Navigate to Control Panel (Icon Views) > Programs and Features and on the list of installed programs, uninstall the Bluetooth Driver.(reboot if necessary). When finished, the bluetooth device in the device manager should now look like this:
    2. if everything goes well, reinstall the Windows 8 bluetooth Driver (either from the D:\drivers\bluetooth or from the G580 download page)
    For the Dolby, the issue might be similar to this article and this thread. 
    Can you try the following:
    1. Uninstall the Conexant Audio Driver and anything that relates to Dolby from the Control Panel (Icon Views) > Programs and Features
    2. Re-install the Conexant Audio Driver (Win8 version) from the D:\Drivers folder or from the G580 Downloads page (this should reinstall the audio driver and Dolby).
    3. In an event that the Dolby doesn't work, reinstall it from one of theseC:\drivers\audio\DolbyGUI or C:\drivers\audio\DolbyGUI
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • C2-00 Problem with Bluetooth headset

    I use it for a week and have a problem with bluetooth headset.
    When I finish a call my mobile is stop working.
    The only way to get it back is remove a battery.
    I try to use other bluetooth headset but it have the same problem.
    Please help me to fix this problem.
    Thank you.

    conceivably, yes, that is how its supposed to work
    i was just wondering if there was a way to turn it off somehow, so as to only enable the bluetooth for calls and not for all audio. unpairing and pairing the bluetooth definitely works, but it just seems like overkill everytime i want to anything regarding sounds (asise from calls)
    thanks,
    vasilis

  • Problem with bluetooth after downgrade Vista - XP

    I've maked downgrade, but I have got a problem with bluetooth. System shown my new device, but it look for driver. I have downloaded it from http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67782 but its wrong. The file name is 68bt02ww.exe
    My notebook id Lenovo 3000 N200
    Does anybody know where can I find the correct driver?

        Thank you for testing this out, rabshm. If you go to Settings>Bluetooth>Paired Devices>and select the Settings/cog wheel> You will see a series of configuration options for Bluetooth services. Try disabling them all, and start testing by turning on one setting at a time. See if there is a conflict with the incoming messages.
    Let us know if this helps.
    Thank you, rabshm
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • Problem in installing "audio device on high definition audio bus"

    i have cq40 144tu laptop
    i downgrade to XP with the nice tutorial posted on this forum.
    my laptop S/N - [text removed for privacy]
    P/N FZ736PA#ACJ
    I M GETTING PROBLEM IN INSTALLING AUDIO DEVICE ON HIGH DEFINITION AUDIO BUS
    i have tried sp39671 which was sugges in that tutorial but that not work

    The other sound driver is Intel HDMI driver, it is bundled in Intel GMA driver.
    Update your BIOS to the latest one and do a clean instalation of XP-SP3 then you dont need devcon utility.
    See XP downgrade guide for futher detail, here
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • I've a problem with bluetooth on my iphone 4

    HI!
    I've a problem with bluetooth on my iphone 4 : it doesn't recognize anything
    what can I do ?

    What do you mean anything?
    IPhone support bluetooth for stereo speakers/headsets, handsfree telephone devices/headsets, some peer-to-peer apps from the app store, some bluetooth keyboards, and tethering where provided by the carrier.
    Other than this, it will not connect to another phone/device/computer.
    Withe what are you trying to connect?

  • I have a problem with the audio on a movie I downloaded

    I am having a problem with the audio on a movie that I downloaded.  It is scratchy and difficult to listen to.  How can I fix this?

    Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes (or delete it from your iOS device and redownload it via the Purchased tab in the iTunes Store app on it)
    If you aren't in a country where you can re-download films or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for