Problem with BO Data Services - Multiple Dataflows in single WorkFlow

Hi All,
I have defined a single job, with one workflow and multiple data flows within the workflow.
The idea is to build a single load file adding data from each subsequent data flow. For example
- First Data Flow adds header records
- Second adds 1st level details
- Third adds subsequent details
- etc
- Last Dataflow sorts the output file created in the previous dataflows into the correct order
Building this in stages the first data flow worked with the subsequent data flows blank.
Then added the second data flow and linked to the first which caused the job to fail.
Error Message as follows
Syntax error at line <1>: <>: found <[end of text]> expecting <'(', &ERROR, __AL_LOOKUPEX_TRAN, __AL_SEARCH_REPLACE_TRAN,
__FUNC_TABLE, __AL_MEMORY_TABLE, __AL_EXTRACT_FROM_XML, __AL_TRAN_FUNCTION, __AL_SCHEDULE, ALL, AND, CREATE, FLOWOUTPUT, IF,
INTEGER, Numeric, READ, a decimal, -, SYSTEM, VARIABLE, VIEW, +, NOT>.
1 error(s), 0 warning(s).
Any suggestions on how to get this to work appreciated?

David,
What you described should work. Personally, I'd write the output of the first dataflow to a table, just to insure your output is what you think it is. Then test the second against the data in the table you created in the first workflow. Continue the process until each independent job works as expected. Then combine into the single workflow.

Similar Messages

Problems with logical data service

This is related to thread 837141 (Problems creating physical data service to relational table)
I have been able to create the logical data service that uses the physical service (mentioned above).
However when I try to create a library function to update (shown below)
declare function lper:update($new as element(per:Persistance2)) as xs:boolean {*
* let $changed :=*
* for $n in $new*
* let $old := lper:read($new/Project, $ew/Property)*
* return*
* fn-bea:replace-value(fn-bea:changed-element($old), "Value", $n/Value)*
_let $return := {color:#ff0000}pper:update{color}($changed)_*
* return fn:true()*
WorkSpace Studio gives the following error (for the line underlined above, and the function in red)
*{bea-err}FUNC002: Illegal use of side-effect procedure {ld:Physical/Persistance2}update with arity 1. Side-effect procedures cannot be invoked from a side-effect free context*
Any idea why?

functions, by definition, do not have side-effects. So calling something that had a side-effect (procedure) is not allowed.
You need to create a library procedure.
Your
declare function lper:update($new as element(per:Persistance2)) as xs:boolean {*
needs to be
declare procedure lper:update($new as element(per:Persistance2)) as xs:boolean {*
- mike
Edited by: mikereiche on Dec 12, 2008 5:10 PM

Insert problems with Php Data Services

Hi All,
I am using Flex Data wizards to create a simple CRUD application and i am having problems adding data. It works the first time i start my application but subsequent calls to the insert fail.
I am using FB2 Beta with MAMP. The php classes are being generated using the data wizard. i have tried commenting out mysqli_close but still it doesn't work.
public function createDive_events($item) {
$stmt = mysqli_prepare($this->connection, "INSERT INTO $this->tablename ( divedate, divesite, divecost, description, totalDays) VALUES ( ?, ?, ?, ?, ?)");
$this->throwExceptionOnError();
mysqli_bind_param($stmt, 'ssdsi', $item->divedate, $item->divesite, $item->divecost, $item->description, $item->totalDays);
$this->throwExceptionOnError();
mysqli_stmt_execute($stmt);
$this->throwExceptionOnError();
$autoid = mysqli_stmt_insert_id($stmt);
mysqli_stmt_free_result($stmt);
//mysqli_close($this->connection);
return $autoid;
Any ideas, what i am doing wrong. I have tried using the update and it works only once as well, it seems that the connection to the function is lost after the first call.
thank you,
Nayan

Ok, this is what I got.
create a mysql table (`people`) with columns id (auto increment), first_name, last_name, age
in the data/service panel connect to a php service, generate a php service from the database and the people table
generate a form from the createPeople service call
observe that in source view we have something like this: <fx:Script>
<![CDATA[
       protected function button_clickHandler(event:MouseEvent):void {
          createPeopleResult.token = peopleService.createPeople(people);
]]>
</fx:Script>
<fx:Declarations>
<valueObjects:People id="people"
                       people_id="{parseInt(people_idTextInput.text)}"
                       age="{parseInt(ageTextInput.text)}"/>
<peopleservice:PeopleService id="peopleService"/>
<s:CallResponder id="createPeopleResult"/>
</fx:Declarations>
If you now try to execute the code, you will find that you can only insert one person, where each successive addition silently fails.
There is nothing really wrong with the php code (well actually since it's auto incrementing on id you should pull all id reference out of the insert statements...) rather there is a problem with the flex people object.
If you make the following changes the code will work
protected function button_clickHandler(event:MouseEvent):void {
var myPerson:People = new People();
myPerson.first_name = people.first_name;
myPerson.last_name = people.last_name;
myPerson.age = people.age;
createPeopleResult.token = peopleService.createPeople(myPerson);
- e

Problem with BO Data Services Function lookup_ext

HI All,
I have to be able to lookup values in a code table based on three input parameters and returning two description columns. Using the wizard and then adding comments I get the following:
lookup_ext(
Lookup Table Specifications
[DS_DB2_RISM.RIMS.RIT_CODE_TABLE,'NO_CACHE','MAX'],
Return Column List Specification
[T_DESCRIPTION,T_LONG_DESC],
Default Value List
[NULL,NULL],
Condition List
[C_STATUS,'=',$IV_STATUS,C_TYPE,'=',$IV_TYPE,C_VALUE,'=',$IV_VALUE],
Order By List
Output Variable List
[$OV_DESCRITION,$OV_LONG_DESC],
SQL Override
SET ("run_as_separate_process"='no',
      "output_cols_info"='<?xml version="1.0" encoding="UTF-8"?>
      <output_cols_info>,
      <col index="1" expression="no"/>
      <col index="2" expression="no"/>
      </output_cols_info>)
This produces the following errors
[Function:CF_DB2_RIMS_CODE] (Ln21): Syntax error : found <[end of text]> expecting <IF, a decimal>
[Function:CF_DB2_RIMS_CODE] The function <CF_DB2_RIMS_CODE> contains an invalid expression. additional information: syntax error>. (BODI-1111182)
I have tried
1) including the single quote after > on the line with xml version
2) Including the single quote before ) on the last line
3) Getting ride of the SET statement altogether
Any suggestions welcome?

David,
What you described should work. Personally, I'd write the output of the first dataflow to a table, just to insure your output is what you think it is. Then test the second against the data in the table you created in the first workflow. Continue the process until each independent job works as expected. Then combine into the single workflow.

Problem with reversal of Service entry Sheet

Hi All,
I am facing a problem with reversal of service entry sheet. The user has posted the document in dec 2009 and now the user wants to reverse the doc. I told the process how to reverse it. But when she is trying to revoke the acceptance, she is getting error log.I told her to reset the posting date to present date.Now she tried to change the doc date but she is getting error as "604 item 010 WBS element ****** budget exceeded year 2009". So i advised her further to increase the budget in the year 2009. Even that solution is not working.
Please help in this regard
Thanks & Regards
Nisha Prasad

Hi,
The user is not authorised to change the budget. The person resposible for this is telling that increasing the budget wont help. can you tell me how to view whether the budget is available for the system in the period or not? Can you please help me in this regard?
Thanks
Nisha

PDF Generation with LiveCycle Data Services

Hi everybody!
I am using LiveCycle Data Services to generate a dynamic pdf. I worked with this tutorial : livedocs.adobe.com/livecycle/es/sdkHelp/programmer/lcds/pdfgen_1.html and i adapted the code to my own example.
I created a pdf template with livecycle designer and i succeed to generate the pdf thanks to LiveCycle Data Services.
Here is my problem :
In LiveCycle Designer i create a table and bind my data connection (from xml source) to this table and i bind subforms to repeating data.
It works when i try to open an overview of the pdf with LiveCycleDesigner.
But when i try to generate the pdf with livecycle data service, there is no repeat of my data. There is only a number of items corresponding to the minimum of repeating i set in livecycle designer binding window...
Is it possible to generate repeating data with LiveCycle DS ?
an example of my xml source :
<item id="1">
<data>blabla</data>
</item>
<item id="2">
<data>blabla</data>
</item>
In livecycle designer, if i set the minimum of repeating to 1, LiveCycle DS generate a pdf with only one item.
if i set the minimum of repeating to 2, LiveCycle DS generate a pdf with only 2 items. etc.
I don't know how to generate an indeterminate number of items...
Thanks in advance for your help.
Bye
Guillaume

Hi Guillaume,
there is no limitation. Dynamic PDF files can be generated with Livecycle Data Services.
You should have a look at the XML file generated by your Flex code. Try to save it and see how the XML file behaves when you generate a PDF preview with Designer. You can go to the menu: File > Properties > Preview > Use XML test data...
With the XFAHelper class, you can either load a PDF or a XDP file. Have you tried with a XDP ?
I've attached a dynamic PDF file that I've created for a customer. I generate a dynamic PDF file using LiveCycle Data Services. Maybe you'll find some clues within the file.
Michael

PSP: problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Problem with RESTful web service

I am running into a problem with Flex Web Services (REST) in trying to get the proper format returned. I can see that the HTTP header is set to
Accept: */*;
rather than
Accept: application/xml
when sending the request. The web service was generated via the web services HTTP data services wizard. I edited it to set the resultFormat to xml
    // Constructor
    public function _Super_UsersService()
        // initialize service control
        _serviceControl = new mx.rpc.http.HTTPMultiService();
         var operations:Array = new Array();
         var operation:mx.rpc.http.Operation;
         var argsArray:Array;
         operation = new mx.rpc.http.Operation(null, "getUsers");
         operation.url = "http://localhost:8888/users";
         operation.contentType = "";
         operation.method = "GET";
         operation.resultFormat = "xml";
         //operation.serializationFilter = serializer0;
         operation.properties = new Object();
         operation.properties["xPath"] = "/";
         operation.resultType = valueObjects.Users;
         operations.push(operation);
         _serviceControl.operationList = operations;
         model_internal::initialize();
How does one configure the accept header?

Hi,
I have posted a simple application with the RESTful reference:
http://apex.oracle.com/pls/apex/f?p=13758
I can give you full privileges on this so you can look at the WEB service reference. Shall I send to you separately for login user?
It is using the RESTful service: http://apex.oracle.com/pls/apex/nd_pat_miller/demo/employee/{deptno}
This RESTful service tests fine when I test from within the RESTful web service module of the Workspace.
I based this on the Video demo tutorial for RESTful web service that Oracle published for 4.2 release. The video seemed to exclude the {deptno} in the URL but when I try that, it doesn't work either.
This is the error I am getting when I run this on my Apex environment: (it, of course, will not run the web service in the apex.oracle.com environment)
class="statusMessage">Bad Request</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons"><li class="badRequestReason"><span class="target" style="display:none;">uri</span><span class="reason">Request path contains unbound parameters: deptno</span></li>
</ul>Thanks,
Pat
Edited by: patfmnd on May 8, 2013 3:33 AM

HT6114 i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version.

i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version. Any solution?

This from the crash log
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/Accounts.framework/Versions/A/Accounts
Referenced from: /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
indicates there is a missing library on your system. What problems were you having before that caused you to delete Safari? How did you delete it?
You're best bet in this case is to re-install the OS. While doing a re-install will not normally harm your user data having a good working backup in cases like this is essential.

PLSQL Server Pages (PSP): problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

After upgrading to firefox 3.6 I have problem with hotmail email service

after upgrading to firefox 3.6.4 I have problem with hotmail email service, however I can login in hotmail, I can't open mails or delet or do anything else with them.
== URL of affected sites ==
http://hotmail.msn.com

Thank you, but I already have "always show tabs bar" set.
Also, I have two computers and the other is running the exact same version of Firefox, and the exact same theme, but it does not have this problem.
To make sure I'm being clear: there is an "x" on each tab that allows me to close it when I have multiple tabs open. When I have only one tab open, there is no "x"; so in order to close the webpage I have to open another empty tab, and then close the first. My other computer has the "x" to close the tab visible even when there is only one tab so that I can close the page and have an empty (marked "(untitled)" tab). Please help!

Problem with Java Dates and UPDATE for SQL2000

I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
var Today = new Date()
var conn = Server.CreateObject( "ADODB.Connection" )
conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
var rs = conn.execute(sql)
I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
Help....
Norm...

Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
Lee

Problem with billing date at closed period

Hi
We have a problem with billing date in transaction . Previously we could set up different (earlier) billing date than the actual posting period and now it is not working. We receive an error message that the posting period is closed ) .
I attached an example invoice which we managed to post and where you can see what Iu2019m thinking about, parking number: 1024337, BILLING DOCUMENT: 841835. In this case the billing date was at 30.11.2007, but the posting in 15.07.2008 and we managed to post.
Pls help that issue
yps

hi,
it is due to posting period closed for the month of 07/2008.
u need to open posting during that period.
Regards,
Greeshma

Facing problem with a date column in select query

Hi,
I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
Query: SELECT *
FROM EMP
WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
LAST_UPDATED column is "DATE" data type.
Please help me Thanks

Radhakrishna Sarma wrote:
SeánMacGC wrote:
WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
You do not need the TRUNC here in any case.
I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
Regards,
Jo
Edit: I think Sean proved his point... ;)

Is LC Foundation bundled with LiveCycle Data Services

I recently got this question - Do I get LC Workbench and LC Foundation when I buy LiveCycle Data Services?
The answer is "No".
With LiveCycle Data Services you get:
1. LiveCycle Data Services server - It works with most application server, but ship with a tomcat based turnkey option
2. Adobe Application Modeling Plugin - This is a plugin to Flash Builder 4 that enables to do Model Driven Development of Flex applications. This is "New in 3.0"
Anil Channappa | Sr. Product Manager LiveCycle Data Services and Blaze DS
Adobe Systems Inc | 21-61 Hickory Dr, Waltham, MA 02451-1011
[email protected]<mailto:[email protected]>| 781.839.1331 | myBlog<http://anilchannappa.org/

Hi Guillaume,
there is no limitation. Dynamic PDF files can be generated with Livecycle Data Services.
You should have a look at the XML file generated by your Flex code. Try to save it and see how the XML file behaves when you generate a PDF preview with Designer. You can go to the menu: File > Properties > Preview > Use XML test data...
With the XFAHelper class, you can either load a PDF or a XDP file. Have you tried with a XDP ?
I've attached a dynamic PDF file that I've created for a customer. I generate a dynamic PDF file using LiveCycle Data Services. Maybe you'll find some clues within the file.
Michael

Problem with BO Data Services - Multiple Dataflows in single WorkFlow

Similar Messages

Maybe you are looking for