Problem with boot commands on G3 iMac

My iMac G3 will not accept any boot commands like "C" or "CMD, ALT, P, R" etc... etc... when using the original Apple PRO keyboard.
The Pro keyboard is fine and all the keys work in OS X. For the sake of it i tried another keyboard from my Power Mac and the boot commands worked perfectly.
What could the problem be so?

Macintosh: How to Troubleshoot the Apple Pro Keyboard and Mouse
Apple Pro Keyboard: System Requirements

Similar Messages

We have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions

we have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions?

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

P35Neo2 FIR and problem with booting

So I have problem with booting my compie. Compie try to boot to the part of start windows, after that in case of switch into graphicis mobo going down and restarting (WinXP SP3). I think, that problem is not in PSU, cos i have 800W XILENCE (+3,3V 28A, +5V 32A, 4x+12V 20A, -12V 0,5A, 5VSB 3A), Board P35 Neo2 FIR, E7200 proc, bios 1.9 (updated). I have 5 disk and use raid function in bios. Graphic Radeon HD3650, Memory Zeppelin 4x1GB KIT 800Mhz.
I start with change of PSU from 550W to 800W but it didnt work, previus PSU had (+3,3V 30A, +5V 32A, 2x+12V 18A, -12V 0,8A, 5VSB 3A),
i try change memory, but no efect.
After update bios there was standard warning about bad cheksum, after resave Bios settings it was gone, and compie boot after that.
Any idea?
Thanks

So my problem is solved...but my feeling of this is not good...
I updated BIOS from 1.9 to 1.10, reset Bios settings, after restart i pressed F2 for load standart settings and i changed in Bios only that i am using RAID and disable disket and it works...i boot my compie into windows without any problem...
So i try change another things in Bios and my compie hangs in continous resets without booting into windows...no BSOD only restart and restart...
After reseting Bios settings and again Load to Default it works...and run windows...
There was only one new thing ... screen flick for the second with new screen about checking NVRAM ....this screen was not visible before (and maybe this is the problem), cos if i change something in BIOS about clocking and power management and other ones, this screen is by booting missing...and compie not run in Windows...
Next thing what i see, that in CPU multiplication dont work multiplication 9,5 and proc used frequency 2400 (9x) (it is E7200 on 2533)
i hope that this bios 1.10 fixed my problems...and my opinion is that P35 Neo 2 FIR is not ideal board for E7200 proc...so i m looking for another proc...and maybe another board...

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

Problem with boot / new install system ond SSD

Hi guys,
I have fresh installed system on my new SSD. I use my old HDD as external usb drive.
I have problem with boot when I dont have connected HDD to usb.
My system boot only to console no to KDE. When I connect external HDD to usb and reboot system, system boot normally.
Logs after boot.
Feb 26 16:46:39 arch systemd[1]: Reached target Login Prompts.
Feb 26 16:46:39 arch systemd[1]: Starting K Display Manager...
Feb 26 16:46:39 arch systemd[1]: Started K Display Manager.
Feb 26 16:46:39 arch systemd-logind[231]: New seat seat0.
Feb 26 16:46:39 arch systemd[1]: Started Login Service.
Feb 26 16:46:40 arch kernel: microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
Feb 26 16:46:40 arch kernel: platform microcode: Direct firmware load failed with error -2
Feb 26 16:46:40 arch kernel: platform microcode: Falling back to user helper
Feb 26 16:46:40 arch kernel: random: nonblocking pool is initialized
Feb 26 16:46:40 arch kernel: uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
Feb 26 16:46:40 arch laptop-mode[271]: enabled, not active
Feb 26 16:46:40 arch kernel: input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.0/input/input16
Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver uvcvideo
Feb 26 16:46:40 arch kernel: USB Video Class driver (1.1.1)
Feb 26 16:46:40 arch systemd[1]: Started Wicd a wireless and wired network manager for Linux.
Feb 26 16:46:40 arch systemd[1]: Starting Network.
Feb 26 16:46:40 arch systemd[1]: Reached target Network.
Feb 26 16:46:40 arch systemd[1]: Starting OpenSSH Daemon...
Feb 26 16:46:40 arch systemd[1]: Started OpenSSH Daemon.
Feb 26 16:46:40 arch systemd[1]: Starting NoMachine Server daemon...
Feb 26 16:46:40 arch sshd[373]: Server listening on 0.0.0.0 port 22.
Feb 26 16:46:40 arch sshd[373]: Server listening on :: port 22.
Feb 26 16:46:40 arch mtp-probe[404]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2"
Feb 26 16:46:40 arch mtp-probe[404]: bus: 7, device: 2 was not an MTP device
Feb 26 16:46:40 arch kernel: hidraw: raw HID events driver (C) Jiri Kosina
Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver usbhid
Feb 26 16:46:40 arch kernel: usbhid: USB HID core driver
Feb 26 16:46:40 arch systemd[1]: Starting Sound Card.
Feb 26 16:46:40 arch systemd[1]: Reached target Sound Card.
Feb 26 16:46:40 arch systemd-udevd[145]: renamed network interface eth0 to enp3s0
Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
Feb 26 16:46:40 arch kernel: i915 0000:00:02.0: irq 45 for MSI/MSI-X
Feb 26 16:46:40 arch kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Feb 26 16:46:40 arch kernel: [drm] Driver supports precise vblank timestamp query.
Feb 26 16:46:40 arch kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Feb 26 16:46:40 arch kernel: iTCO_vendor_support: vendor-support=0
Feb 26 16:46:40 arch kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Feb 26 16:46:40 arch kernel: iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
Feb 26 16:46:40 arch kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Feb 26 16:46:40 arch kernel: input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event2 (Lid Switch)
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event1 (Sleep Button)
Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event3 (Power Button)
Feb 26 16:46:41 arch kernel: microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
Feb 26 16:46:41 arch kernel: platform microcode: Direct firmware load failed with error -2
Feb 26 16:46:41 arch kernel: platform microcode: Falling back to user helper
Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input17
Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0001: input,hidraw0: USB HID v1.11 Keyboard [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input0
Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18
Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0002: input,hidraw1: USB HID v1.11 Mouse [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input1
Feb 26 16:46:41 arch kernel: BUG: unable to handle kernel NULL pointer dereference at (null)
Feb 26 16:46:41 arch kernel: IP: [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: PGD b650b067 PUD b650a067 PMD 0
Feb 26 16:46:41 arch kernel: Oops: 0000 [#1] PREEMPT SMP
Feb 26 16:46:41 arch kernel: Modules linked in: mousedev(+) hid_generic iTCO_wdt iTCO_vendor_support ath9k(+) usbhid ath9k_common hid ath9k_hw ath uvcvideo mac80211 microcode(+) videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media evdev psmouse serio_raw pcspkr cfg80211 lpc_ich i915(+) atl1e snd_hda_codec_via snd_hda_intel drm_kms_helper snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit i2c_core snd_timer asus_laptop snd battery ac soundcore sparse_keymap acpi_cpufreq rfkill video input_polldev thermal intel_agp intel_gtt shpchp processor button ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod atkbd libps2 ahci libahci libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common i8042 serio
Feb 26 16:46:41 arch kernel: CPU: 1 PID: 227 Comm: acpid Not tainted 3.13.5-1-ARCH #1
Feb 26 16:46:41 arch kernel: Hardware name: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 217 12/04/2009
Feb 26 16:46:41 arch kernel: task: ffff88007ffeda00 ti: ffff8800b6516000 task.ti: ffff8800b6516000
Feb 26 16:46:41 arch kernel: RIP: 0010:[<ffffffffa06c1317>] [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: RSP: 0018:ffff8800b6517c10 EFLAGS: 00010202
Feb 26 16:46:41 arch kernel: RAX: 0000000000000000 RBX: ffff8801390f5800 RCX: ffff8801390f5868
Feb 26 16:46:41 arch kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
Feb 26 16:46:41 arch kernel: RBP: ffff8800b6517c28 R08: 0000000000000000 R09: ffff88013b001600
Feb 26 16:46:41 arch kernel: R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
Feb 26 16:46:41 arch kernel: R13: ffff8801390f5880 R14: ffff8800b3287558 R15: ffff880138c8f600
Feb 26 16:46:41 arch kernel: FS: 00007f8de7e14700(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
Feb 26 16:46:41 arch kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Feb 26 16:46:41 arch kernel: CR2: 0000000000000000 CR3: 00000000b6507000 CR4: 00000000000407e0
Feb 26 16:46:41 arch kernel: Stack:
Feb 26 16:46:41 arch kernel: ffff88013926e400 ffff8801390f5800 ffff8801390f5878 ffff8800b6517c60
Feb 26 16:46:41 arch kernel: ffffffffa06c20cc ffff8801390f5b48 ffff8800b3287558 ffff880138c8f600
Feb 26 16:46:41 arch kernel: ffffffffa06c2e80 ffff880138c8f610 ffff8800b6517c98 ffffffff811a834f
Feb 26 16:46:41 arch kernel: Call Trace:
Feb 26 16:46:41 arch kernel: [<ffffffffa06c20cc>] mousedev_open+0xcc/0x150 [mousedev]
Feb 26 16:46:41 arch kernel: [<ffffffff811a834f>] chrdev_open+0x9f/0x1d0
Feb 26 16:46:41 arch kernel: [<ffffffff811a19e7>] do_dentry_open+0x1b7/0x2c0
Feb 26 16:46:41 arch kernel: [<ffffffff811aedc1>] ? __inode_permission+0x41/0xb0
Feb 26 16:46:41 arch kernel: [<ffffffff811a82b0>] ? cdev_put+0x30/0x30
Feb 26 16:46:41 arch kernel: [<ffffffff811a1e01>] finish_open+0x31/0x40
Feb 26 16:46:41 arch kernel: [<ffffffff811b1bf2>] do_last+0x572/0xe90
Feb 26 16:46:41 arch kernel: [<ffffffff811af0b6>] ? link_path_walk+0x236/0x8d0
Feb 26 16:46:41 arch kernel: [<ffffffff811b25cb>] path_openat+0xbb/0x6b0
Feb 26 16:46:41 arch kernel: [<ffffffff811b3cda>] do_filp_open+0x3a/0x90
Feb 26 16:46:41 arch kernel: [<ffffffff811c05c7>] ? __alloc_fd+0xa7/0x130
Feb 26 16:46:41 arch kernel: [<ffffffff811a2fd4>] do_sys_open+0x124/0x220
Feb 26 16:46:41 arch kernel: [<ffffffff811a30ee>] SyS_open+0x1e/0x20
Feb 26 16:46:41 arch kernel: [<ffffffff8152142d>] system_call_fastpath+0x1a/0x1f
Feb 26 16:46:41 arch kernel: Code: c0 6e e5 e0 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 a2 6e e5 e0 eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
Feb 26 16:46:41 arch kernel: RIP [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
Feb 26 16:46:41 arch kernel: RSP <ffff8800b6517c10>
Feb 26 16:46:41 arch kernel: CR2: 0000000000000000
Feb 26 16:46:41 arch kernel: ---[ end trace 76aa0cbb67cf77f6 ]---
Feb 26 16:46:41 arch kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Feb 26 16:46:41 arch systemd[1]: acpid.service: main process exited, code=killed, status=9/KILL
Feb 26 16:46:41 arch systemd[1]: Unit acpid.service entered failed state.
Feb 26 16:46:41 arch kernel: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
Feb 26 16:46:41 arch systemd[1]: Started Laptop Mode Tools.
Feb 26 16:46:41 arch nxserver[374]: NX> 161 Enabled service: nxserver.
Feb 26 16:46:42 arch kernel: fbcon: inteldrmfb (fb0) is primary device
Feb 26 16:46:42 arch kernel: ath: phy0: Enable LNA combining
Feb 26 16:46:42 arch kernel: ath: EEPROM regdomain: 0x60
Feb 26 16:46:42 arch kernel: ath: EEPROM indicates we should expect a direct regpair map
Feb 26 16:46:42 arch kernel: ath: Country alpha2 being used: 00
Feb 26 16:46:42 arch kernel: ath: Regpair used: 0x60
Feb 26 16:46:42 arch kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Feb 26 16:46:42 arch kernel: ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011e80000, irq=17
Feb 26 16:46:42 arch systemd-udevd[139]: renamed network interface wlan0 to wlp2s0
Feb 26 16:46:42 arch kernel: Console: switching to colour frame buffer device 170x48
Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: registered panic notifier
Feb 26 16:46:42 arch kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Feb 26 16:46:42 arch kernel: acpi device:38: registered as cooling_device2
Feb 26 16:46:42 arch kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input19
Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxnode.
Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxd.
Feb 26 16:46:42 arch systemd[1]: Started NoMachine Server daemon.
Feb 26 16:46:42 arch systemd[1]: Starting Multi-User System.
Feb 26 16:46:42 arch systemd[1]: Reached target Multi-User System.
Feb 26 16:46:42 arch systemd[1]: Starting Graphical Interface.
Feb 26 16:46:42 arch systemd[1]: Reached target Graphical Interface.
Feb 26 16:46:42 arch systemd[1]: Startup finished in 1.241s (kernel) + 3.231s (userspace) = 4.473s.
Feb 26 16:46:46 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Feb 26 16:46:48 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1383]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1383]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1389]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1389]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: enp3s0 error: No such file or directory
Feb 26 16:46:49 arch wicd[226]: dhcpcd[1397]: dhcpcd not running
Feb 26 16:46:49 arch dhcpcd[1397]: dhcpcd not running
Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
Feb 26 16:46:51 arch systemd[1]: Starting Getty on tty2...
Feb 26 16:46:51 arch systemd[1]: Started Getty on tty2.
Feb 26 16:46:52 arch kernel: wlp2s0: authenticate with 08:86:3b:7f:86:08
Feb 26 16:46:52 arch kernel: wlp2s0: send auth to 08:86:3b:7f:86:08 (try 1/3)
Feb 26 16:46:52 arch kernel: wlp2s0: authenticated
Feb 26 16:46:52 arch kernel: ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
Feb 26 16:46:52 arch kernel: wlp2s0: associate with 08:86:3b:7f:86:08 (try 1/3)
Feb 26 16:46:52 arch kernel: wlp2s0: RX AssocResp from 08:86:3b:7f:86:08 (capab=0x411 status=0 aid=4)
Feb 26 16:46:52 arch kernel: wlp2s0: associated
Feb 26 16:46:52 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Feb 26 16:46:53 arch dhcpcd[1416]: version 6.2.1 starting
Feb 26 16:46:54 arch dhcpcd[1416]: DUID 00:01:00:01:1a:96:a5:70:1c:4b:d6:a2:1f:ad
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: IAID d6:a2:1f:ad
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: soliciting an IPv6 router
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: ipv6nd_sendrsprobe: sendmsg: Cannot assign requested address
Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: rebinding lease of 192.168.2.3
Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.096:2): pid=1406 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
Feb 26 16:46:55 arch login[1406]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Feb 26 16:46:55 arch systemd[1]: Starting user-0.slice.
Feb 26 16:46:55 arch systemd[1]: Created slice user-0.slice.
Feb 26 16:46:55 arch systemd[1]: Starting User Manager for 0...
Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.106:3): pid=1477 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
Feb 26 16:46:55 arch systemd[1]: Starting Session 1 of user root.
Feb 26 16:46:55 arch systemd[1]: Started Session 1 of user root.
Feb 26 16:46:55 arch systemd-logind[231]: New session 1 of user root.
Feb 26 16:46:55 arch systemd[1477]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Feb 26 16:46:55 arch login[1406]: ROOT LOGIN ON tty2
Feb 26 16:46:55 arch systemd[1477]: Failed to open private bus connection: Failed to connect to socket /run/user/0/dbus/user_bus_socket: No such file or directory
Feb 26 16:46:55 arch systemd[1477]: Mounted /sys/kernel/config.
Feb 26 16:46:55 arch systemd[1477]: Stopped target Sound Card.
Feb 26 16:46:55 arch systemd[1477]: Starting Default.
Feb 26 16:46:55 arch systemd[1477]: Reached target Default.
Feb 26 16:46:55 arch systemd[1477]: Startup finished in 7ms.
Feb 26 16:46:55 arch systemd[1]: Started User Manager for 0.
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: leased 192.168.2.3 for 283824000 seconds
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding route to 192.168.2.0/24
Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding default route via 192.168.2.1
Feb 26 16:46:59 arch dhcpcd[1416]: forked to background, child pid 1522
Feb 26 16:47:10 arch kdm[238]: X server startup timeout, terminating
Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] /devices/pci0000:00/0000:00:02.0 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1255 '/devices/pci0000:00/0000:00:02.0' killed
Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] /devices/platform/i8042/serio4/input/input15 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1659 '/devices/platform/i8042/serio4/input/input15' killed
Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18 timeout; kill it
Feb 26 16:47:12 arch systemd-udevd[131]: seq 1679 '/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18' killed
Feb 26 16:47:12 arch kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch systemd[1]: Starting Load/Save Screen Backlight Brightness of acpi_video0...
Feb 26 16:47:12 arch systemd[1]: Started Load/Save Screen Backlight Brightness of acpi_video0.
Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input15, error: -4
Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] terminated by signal 9 (Killed)
Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input18, error: -4
Feb 26 16:47:12 arch kernel: mousedev: PS/2 mouse device common for all mice
Feb 26 16:47:13 arch kdm[238]: X server for display :0 cannot be started, session disabled
Feb 26 16:48:56 arch kernel: usb 7-2: USB disconnect, device number 2
Feb 26 16:48:56 arch laptop-mode[1782]: Laptop mode
Feb 26 16:48:56 arch laptop-mode[1783]: enabled, not active
Feb 26 16:48:56 arch laptop-mode[1834]: Laptop mode
[xx@arch Desktop]$ uname -a
Linux arch 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
Could you please someone help me with this?
Thanks

Sorry to bump this, but I'm having the exact same error tonight on my HTPC, any chance you found out what the problem was ?
To make matters worse, it's not happening every single time, but maybe every 4 out of 5 boots (same kernel, no changes in between.)
I thought this was a kernel issue related to this:
https://lkml.org/lkml/2014/3/10/359
I've tried adding atkbd and psmouse to my mkinitcpio.conf MODULES section and rebuilt, but no change.
I changed the NVidia driver from nvidia-304xx to nvidia-full-beta-all ( 334.21 ) from AUR but it had the same error at the same place.
Here's the part from `dmesg` where it borks:
[ 3.229195] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
[ 3.236312] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
[ 3.237230] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
[ 3.279150] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 3.280083] IP: [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.280810] PGD c99ea067 PUD c9f4a067 PMD 0
[ 3.281266] Oops: 0000 [#1] PREEMPT SMP
[ 3.281668] Modules linked in: mousedev(+) nvidia(PO+) snd_hda_codec_realtek hid_logitech_dj usbhid hid usb_storage coretemp evdev microcode pcspkr serio_raw snd_hda_intel(+) snd_hda_codec shpchp snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore i2c_nforce2 i2c_core wmi processor button r8169 mii ext4 crc16 mbcache jbd2 sd_mod ata_generic pata_acpi ahci libahci libata ohci_pci ohci_hcd ehci_pci ehci_hcd scsi_mod usbcore usb_common psmouse atkbd libps2 i8042 serio
[ 3.281820] CPU: 1 PID: 211 Comm: acpid Tainted: P O 3.13.6-1-ARCH #1
[ 3.281820] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./MCP7A-ION, BIOS 080015 10/10/2009
[ 3.281820] task: ffff8800ca5c1b00 ti: ffff8800c97f0000 task.ti: ffff8800c97f0000
[ 3.281820] RIP: 0010:[<ffffffffa1cbc317>] [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.281820] RSP: 0018:ffff8800c97f1c10 EFLAGS: 00010202
[ 3.281820] RAX: 0000000000000000 RBX: ffff8800c9987000 RCX: ffff8800c9987068
[ 3.281820] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
[ 3.281820] RBP: ffff8800c97f1c28 R08: 0000000000000000 R09: ffff8800cf401600
[ 3.281820] R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
[ 3.281820] R13: ffff8800c9987080 R14: ffff8800c0260058 R15: ffff8800c9f2a500
[ 3.281820] FS: 00007f8f12f05700(0000) GS:ffff8800cfa80000(0000) knlGS:0000000000000000
[ 3.281820] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3.281820] CR2: 0000000000000000 CR3: 00000000ca93e000 CR4: 00000000000007e0
[ 3.281820] Stack:
[ 3.281820] ffff8800c9940000 ffff8800c9987000 ffff8800c9987078 ffff8800c97f1c60
[ 3.281820] ffffffffa1cbd0cc ffff8800c9987348 ffff8800c0260058 ffff8800c9f2a500
[ 3.281820] ffffffffa1cbde80 ffff8800c9f2a510 ffff8800c97f1c98 ffffffff811a83ef
[ 3.392372] Call Trace:
[ 3.398245] [<ffffffffa1cbd0cc>] mousedev_open+0xcc/0x150 [mousedev]
[ 3.398245] [<ffffffff811a83ef>] chrdev_open+0x9f/0x1d0
[ 3.398245] [<ffffffff811a1a87>] do_dentry_open+0x1b7/0x2c0
[ 3.398245] [<ffffffff811aee61>] ? __inode_permission+0x41/0xb0
[ 3.398245] [<ffffffff811a8350>] ? cdev_put+0x30/0x30
[ 3.398245] [<ffffffff811a1ea1>] finish_open+0x31/0x40
[ 3.398245] [<ffffffff811b1c92>] do_last+0x572/0xe90
[ 3.398245] [<ffffffff811af156>] ? link_path_walk+0x236/0x8d0
[ 3.398245] [<ffffffff811b266b>] path_openat+0xbb/0x6b0
[ 3.508083] random: nonblocking pool is initialized
[ 3.398245] [<ffffffff811b3d7a>] do_filp_open+0x3a/0x90
[ 3.398245] [<ffffffff811c0617>] ? __alloc_fd+0xa7/0x130
[ 3.398245] [<ffffffff811a3074>] do_sys_open+0x124/0x220
[ 3.398245] [<ffffffff811a318e>] SyS_open+0x1e/0x20
[ 3.398245] [<ffffffff815216ad>] system_call_fastpath+0x1a/0x1f
[ 3.556729] Code: 40 c1 85 df 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 22 c1 85 df eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
[ 3.556729] RIP [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
[ 3.556729] RSP <ffff8800c97f1c10>
[ 3.556729] CR2: 0000000000000000
[ 3.563412] ---[ end trace 590b482a8704c6ac ]---
[ 3.980300] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Here's the output on a good boot:
[ 3.415791] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
[ 3.422256] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
[ 3.422644] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
[ 3.434861] mousedev: PS/2 mouse device common for all mice
[ 3.853639] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Here's my mkinitcpio.conf
: grep -v ^\# /etc/mkinitcpio.conf
MODULES="atkbd psmouse"
BINARIES=""
FILES=""
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
Last edited by corpdecker (2014-03-19 02:47:30)

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

I have a problem with dust on the monitor (iMac 27).

I have a problem with dust on the monitor (iMac 27). it appeared after half a year of use (in a clean room is not dusty). Replaced by a matrix of times under warranty. But after a while, again, there were shortcomings in the upper corners of the matrix. The guarantee is no longer valid. Am I entitled to free replacement of the matrix or the display?

Re: I have a 27" iMac that has developed smudges at top left and right of the screen. Of course it has just gone out of warranty. Anyone had a similar problem or found a solution?
From the More Like This on the right

Problems with 'df' command

Hello folks,
I'm having some problems with df command:
Output:
[nenemfromhell@myhost ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 999M 4.0K 999M 1% /dev
none 999M 4.0K 999M 1% /dev
/dev/sda8 133G 125G 2.0G 99% /media/DU
shm 999M 0 999M 0% /dev/shm
First: It doesn't show my root partition, but i can check it in gparted.
Second: /dev/sda8 is a NTFS partition that its size is 12GB
Thanks.
Last edited by nenemfromhell (2012-01-20 03:37:30)

Please include some detail as to how you solved the problem: https://wiki.archlinux.org/index.php/Fo … way_Street

Problems with ps elements 10 on imac

hi,
i just downloaded the programm yesterday from the app store onto my imac. i want to use it as an extention to my aperture 3.
I have the following questions/problems:
+ starting the programm takes at least 2 minutes, is this normal? I use an Imac Quadcore I7 with 12 gb onboard
+ the preferences: i can only extend the used memory up to 3gb, although i have 12 gb on board?
+ I can not store the preferences, when I shut the programm down, it tells me I do not have the legitimation to store the preferences?!
+ panorama foto work is mostly running out of memory?! 12gb on board
Please can anybody help me?
Thanks
mikle

No, it does not work on the other account. Problem is still/again the same. In the new account it works perfekt.
Von meinem iPad gesendet
Am 08.01.2012 um 22:16 schrieb "Barbara B." <[email protected]>:
Re: problems with ps elements 10 on imac
created by Barbara B. in Photoshop Elements - View the full discussion
If it works in the new account it should hopefully work in your other account, so just log out of that one and go back to the old one and see if it does.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4125222#4125222
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4125222#4125222. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with FileVault 2 on my iMac mid 2007 with Mac OS LION on it

Hi guys !
Get a problem with FileVault 2 on my iMac mid 2007 with MAC OS LION on it. FileVault 2 works, but after rebooting my system, it was unpossible to select an account with the cursor of my trackpad. No chance.
Before activate Filevault 2 the trackpad works fine. No problems to select an account. Anybody else with the same problem ?
Regards
Volker

Hi EVO67 !
I checked out your solution, but.... sorry it doesn't works.
So I cut off the bluetooth connection of the magic trackpad from my iMac and pair it again, but the problem is the same.
May be it's bigger bug with LION, so I need an update for this function.
But thank you very much for your help.
Regards
Volker

875P NEO FIS2R problems with booting at power-up

Having problems with booting at power-up.
Recently, with no apparent modification to system - at power up the system will often not boot. About 80% of time systems seems to go into a loop with CD/DVD drive light blinking a few times, then the floppy drive light comes on and can hear the FDD run – within 30 seconds or so, this process starts over again. Power switch LED is on and HDD LED is on (continuously). All fans are running (power supply fan, case fan, CPU fan and Intel Canterwood 875 fan ).
Monitor power on light is in power save mode (amber) when system does not boot. When boot is successful the monitor power light turns green immediately.
After pressing the reset button several times (varies between pressing reset button 1 time to 30 or more times) system will then boot OK or go into set up.
Once running there is no apparent problem.
This mainboard comes with D Bracket containing 2 USB 2.0 ports, and 4 diagnostics LEDs - when boot problem occurs the diagnostic LEDs, give a code that in the MSI mainboard manual states “Initializing Keyboard Controller” and diagnostic LEDs stays in this mode until via reset button provides a successful boot and start up.
Have reseated all connectors.
SYSTEM
Mainboard – MSI 875P Neo FIS2R (MSI 6758)
BIOS – AMI v1.8 (has not been updated)
CPU – Intel P4 2.6 GHz - system bus 800 MHz 512 KB L2 Cache
Memory – 1.5 gb (2 x 256 mb and 2 x 512mb)
Power Supply – Antec 380 watt
HDD – IED WD 160 GB and IED WD 40 GB
Video Card – ATI Radeon 9600 (128 RAM)
Operating System – MS Windows XP Pro (sp2)

Quote from: BOSSKILLER on 17-May-08, 03:34:12
Have you done >>Clear CMOS Guide<<?
Cleared CMOS - no change same problem. Also, re-seated all connectors at same time.
Quote from: Wonkanoby on 17-May-08, 09:06:54
have you just added the second wd drive
are they jumpered right
jumperless if alone on ide
jumpered master /slave if two on it
No, second 40GB HDD was installed months before this issue started and is jumpered as slave drive. Also, no other additional hardware installed for several months before issue.

Problems with horizontal lines on the iMac. Someone knows the solution?

For several months my Imac has horizontal lines have been growing. Problems with horizontal lines on the iMac. Someone knows the solution?

You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
That being said, no new Mac comes w/Snow Leopard which your profile confirms you have.
Mac OS X (10.6.8)

Problem with boot camp

Hi, how are you all
I have a problem since 3 months
I tried something in boot camp and ended up doing something wrong
Now every time I want to start my iMac I need to hold alt and choose MAC, or else it will take me to black screen that shows "no driver found to boot...."
I thought it wasn't that big deal, I don't need windows anymore, and it is not that hard to hold alt key while imac starts
but today I tried to install windows, because I upgraded ram to 12gb and wanted to try them, but I couldn't
I did devoid the hard disk successfully, but when I want to install windows 7 the computer restart, this is normal I know, but then it takes me to the white screen again where I can either hold down alt button and it will take me back to snow leopard, or don't hold any key which will take me again to that black screen I mentioned before
This is really frustrating
I live in UAE so there is no apple store here, and no offense but every authorized apple reseller has stupid people that don't know a bit about MAC, just hired to sell with no knowledge, I asked them about the problem and no one knew what I was talking about and brought the imac and no one knew how to solve it.
So hopefully ill find answer here
Please if you know the answer tell me, want to try the RAM
Thanks, Ahmad

Redo your install.
As in Boot from Windows 7 and do a clean install, format the drive which is already NTFS.
Installation Guide Instructions for all features and settings.
Boot Camp FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Discussions forums Discuss Boot Camp topics with other users.
Troubleshooting
iMac displays a black screen during installation of Windows 7
Symptoms
When installing Microsoft Windows 7 on an iMac (27-inch, Late 2009) and iMac (21.5-inch, Mid 2010) using Boot Camp, a black screen may appear. This can happen because the Windows 7 installer does not include the necessary graphics or Bluetooth drivers for your Mac.
http://www.apple.com/support/bootcamp/
Pay attention to any Apple tips and articles above that deal with your Mac.
Have your OS X DVD ready for after Windows is installed.
Tip: Most geniuses have mixed or limited or wrong information about Windows and installing on Mac, using Boot Camp tools. The above page and articles are good starting place, should be directed to when questions come up.
And take everything with a grain of salt. Good luck.

Strange problems with memory dimms(Banks) in imac 27in mid2010

Hello dear Apple community. I had a really strange problem with memory dimms(modules anyway)
I have one really good imac 27in with i7 but as you know after some years the lcd screen became yellowish and cloudy
So i decided to clean it as i have some knowledge and i did that to others lcd screens with success.
OK so after successfully cleaning and working like new ( i mean not the external screen with magnets but the lcd internally)i started it.
Before dismantling my memory was 16gb ( 4x4 dimms)
After starting it a strange problem arise without any reason! Memory reduced TO 8 GB!!!! memory banks on the right as we seeing it didnt worked at all
and it was not from dimms because i swapped them..!!!
So after a lot of thinking and asking tech guys to take a second opinion all the saying (including me that logic board failed for some strange reason.
Some days before i installed CCleaner and also Onyx because after a lot of installations and uninstallations my mac became a little sluggish..
I thought that some serious preferences files removed or some hardware settings deleted with Onyx ( is very good and powerful program that can fix the pc and also destroy it in a second) so i removed and reset all preferences. But nothing changed.. So i put a new hard drive and reinstall OXS to see if something can change.
After formating HD to appleHFS+ saw system profiler that still couldn't see all banks(16gb). I remove logic board and i put another processor i7 that i have as a back up and still nothing( some saying that only these 2 things must be faulty if memory banks not working , processor an logic board and sometimes reinsatlling OS can fix it as i mentioned before. But still nothing...
So from my nerves and after so much testings and no sleeping for 2 days as it was working i pulled off the memory modules from the right bank i put them again ( off course nothing changed) and i close it. After i restarted it like a miracle finally i saw that i have again 16gb in system profiler!!
Tech guys here please give me an explanation to this because i gooing crazy! What happened and after i pulled off the dimms while it was working the problem fixed?? It is not recomended at all this action. I forgot to mention that i did Apple hardware test and nothing found..
Sorry for long post.

Okay great news... My memory problems are solved and my Mac Mini is now running at 8 gigs of Ram. I tried the suggested DD3 1333 which the computer wouldn't even recognize.
So after visiting the Apple Store in the Fair Oaks VA shopping mall; they suggested that I try DDR3 8500 ram. I visited Micro Center in Vienna VA, and I purchased BGreg's Suggested Crucial Brand Ram. 10 minutes after I got home the Mac Mini booted on the 1st try with 8 gigs of Ram.
Some venting that Apple hopefully will read and mention to their resellers....
The people in the Apple section of MicroCenter in Vienna at first argued that the Mac Mini only supports 4 gigs. EVEN AFTER I SHOWED THEM THE SPECS on the Apple website. The clerk (who I am calling a clerk because by no means was he a "specialist") even suggested that the Apple site was wrong. On a later visit to MicroCenter to purchase the DDR3 8500, that the people at Apple recomended; Microcenter even suggested and argued that I needed DDR3 1333 and NOT DD3 8500. THIS WAS AFTER I TOLD THEM THAT Mac Mini WOULD NOT RECOGNIZE the DD3 1333 Dimms. Working in retail myself I don't go along with the concept that the customer is always right, however in this instance clearly I was.
I should point out that some of the staff in Microcenter really do try hard, however like with any business it only takes a few "know it all" bad examples to turn customers off.
Curious post thought; I wasted about $75 in gas driving to and from Microcenter because of their bad advice.

Problem with shell commands and scripts from an Applescript Application

Hi-
I am fairly new to OSX software development. I am trying to build an application that creates a reverse SSH tunnel to my computer and starts OSXvnc. The idea is that my Mom or anyone else who needs help can connect to me without having to tinker with their firewalls.
There are plenty of resources on how to do this, and I have found them. What I have a problem with is the following.
I am building this application in Xcode as an Applescript application, because Applescript and shell scripting are the only forms of programming I know. I use an expect script to connect through SSH, and a "do shell script" for the raw OSXvnc-server application to allow screen sharing.
The problem is that when I click on the button to launch OSXvnc-server or the button to launch SSH, the application freezes until the process it spawns is killed or finishes. For example, I can set SSH to timeout after 60 seconds of no connection, and then the Applescript application responds again. I even tried using the ssh -f command to fork the process, but that doesn't seem to help.
I am also using "try" around each of the items.
What am I doing wrong? How can I make the buttons in my app launch SSH and OSXvnc-server without hanging the application while it waits for them to finish?
Thanks so much!

See here for an explanation of the syntax.
(20960)

Problem with boot commands on G3 iMac

Similar Messages

Maybe you are looking for