Problem with booting windows 7 (x32 & x64) on GX623

Hello
I have a small problem, I installed on may msi GX623 notebook windows 7 x32 and I see the loading screen for 4 minutes (picture), can I do something to speed up boot? I don’t want every time wait 4 minutes that he’s booting only.
And I have problems to install windows x64 (vista & seven) on my notebook, after complete install and restarting of windows x64 he is not booting. The system hangs at the loading screen
I am already updated my bios and firmware
Thanks in advance for help

Quote from: Svet on 22-October-09, 21:40:11
Does that happen since 1st OS run? Or after some driver{s} or software installation?
What's W7 version you use? Latest one or?
Yes, at the first run, and I use the latest final version of w7

Similar Messages

Lenovo G510, i5 - Problems with booting Windows 8.1 from media disk

Hello,
I know that some of you got into this little trouble too, so please help me out.
Yesterday I got a brand new Lenovo G510, i5, with free dos and tried to install the Windows 8.1 from a media disk.
The problem is that it won't boot from CD.
I got in Bios using the Novo button, changed the boot mode from legagcy support to UEFI and nothing happend.
I tried the boot mode to legacy; boot priority to dvd and still won't do it.
It is still trying to boot from the network...is this posible?
How can I get it to boot from CD/DVD?
Some help, tips, indications would be great!
Pretty please
Thanks a lot,
Irina

hi Rurulinda,
Welcome to Lenovo Community Forums!
Boot again inside BIOS
Try setting these
Under Exit TAB
OS Optimization or OS Optimized Should be set as Disabled or Other OS
Under Boot Tab / Start up Tab
Boot Mode Should be set to Legacy
Boot Priority Should be set to Legacy First
UEFI Boot should be set to Disabled
Quick Boot Should be Disabled
Secure boot Should be Disabled
Now press F10 to save everything and Exit
Computer will Restart now inster your CD / DVD Disc in and Turn Off the Computer.
Now on OFF state
Turn it back on and Start tapping F12
This will give you a boot selection with your DVD / CD as an option to boot from.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

No. There is no other location. Be patient. Read the posts in the Bootcamp Forum. There are hundreds of posts about your issue and what to do. https://discussions.apple.com/community/windows_software/boot_camp

P35Neo2 FIR and problem with booting

So I have problem with booting my compie. Compie try to boot to the part of start windows, after that in case of switch into graphicis mobo going down and restarting (WinXP SP3). I think, that problem is not in PSU, cos i have 800W XILENCE (+3,3V 28A, +5V 32A, 4x+12V 20A, -12V 0,5A, 5VSB 3A), Board P35 Neo2 FIR, E7200 proc, bios 1.9 (updated). I have 5 disk and use raid function in bios. Graphic Radeon HD3650, Memory Zeppelin 4x1GB KIT 800Mhz.
I start with change of PSU from 550W to 800W but it didnt work, previus PSU had (+3,3V 30A, +5V 32A, 2x+12V 18A, -12V 0,8A, 5VSB 3A),
i try change memory, but no efect.
After update bios there was standard warning about bad cheksum, after resave Bios settings it was gone, and compie boot after that.
Any idea?
Thanks

So my problem is solved...but my feeling of this is not good...
I updated BIOS from 1.9 to 1.10, reset Bios settings, after restart i pressed F2 for load standart settings and i changed in Bios only that i am using RAID and disable disket and it works...i boot my compie into windows without any problem...
So i try change another things in Bios and my compie hangs in continous resets without booting into windows...no BSOD only restart and restart...
After reseting Bios settings and again Load to Default it works...and run windows...
There was only one new thing ... screen flick for the second with new screen about checking NVRAM ....this screen was not visible before (and maybe this is the problem), cos if i change something in BIOS about clocking and power management and other ones, this screen is by booting missing...and compie not run in Windows...
Next thing what i see, that in CPU multiplication dont work multiplication 9,5 and proc used frequency 2400 (9x) (it is E7200 on 2533)
i hope that this bios 1.10 fixed my problems...and my opinion is that P35 Neo 2 FIR is not ideal board for E7200 proc...so i m looking for another proc...and maybe another board...

I cannot install itunes to my windows 7 computer. I've deleted everthing apple related (in order recommended). I get a message each time that states "There is a problem with this windows installer package. etc.. What should I do?

I've also spent hours on the phone with both apple and windows technical support specialists. This is very clearly not a windows issue. I've given my computer a clean boot, disable my antivirus and firewall, and then attempted to download (yes, from apple's website). I've delete all of the programs (in the necessary order) and then attempted reinstalling with absolutely no luck. I'm starting to think that there's absolutely nothing I will be able to do. I've also never been able to fine "apple software updater or apple software update on my computer, which is particularly odd because I haven't found a post in this community that answers that question. No, "apple software update" cannot be found by accessing the start menu or anything in the "C drive". Apple software update is also never included in the itunes download package that I get from apple's website (the others, such as bonjour, apple application support, and apple mobile support are). No matter what I do, I always get the mesage at the end of the download, "There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
This may or may not be related to the "apple software update" issue.

Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Problem with upgrade Windows 2003 to Windows 2008

Hi,
I have problem with upgrade Windows 2003 to Windows 2008 R2
When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall "adaptec storage manager" but I already remove this driver from the system and registry.
Any ideas to solve this problem?
My server it's IBM System x3500
Regards

Not sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned.
2. Uninstall IBM ServeRAID from the system, just in case
3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else.
5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker.

875P NEO FIS2R problems with booting at power-up

Having problems with booting at power-up.
Recently, with no apparent modification to system - at power up the system will often not boot. About 80% of time systems seems to go into a loop with CD/DVD drive light blinking a few times, then the floppy drive light comes on and can hear the FDD run – within 30 seconds or so, this process starts over again. Power switch LED is on and HDD LED is on (continuously). All fans are running (power supply fan, case fan, CPU fan and Intel Canterwood 875 fan ).
Monitor power on light is in power save mode (amber) when system does not boot. When boot is successful the monitor power light turns green immediately.
After pressing the reset button several times (varies between pressing reset button 1 time to 30 or more times) system will then boot OK or go into set up.
Once running there is no apparent problem.
This mainboard comes with D Bracket containing 2 USB 2.0 ports, and 4 diagnostics LEDs - when boot problem occurs the diagnostic LEDs, give a code that in the MSI mainboard manual states “Initializing Keyboard Controller” and diagnostic LEDs stays in this mode until via reset button provides a successful boot and start up.
Have reseated all connectors.
SYSTEM
Mainboard – MSI 875P Neo FIS2R (MSI 6758)
BIOS – AMI v1.8 (has not been updated)
CPU – Intel P4 2.6 GHz - system bus 800 MHz 512 KB L2 Cache
Memory – 1.5 gb (2 x 256 mb and 2 x 512mb)
Power Supply – Antec 380 watt
HDD – IED WD 160 GB and IED WD 40 GB
Video Card – ATI Radeon 9600 (128 RAM)
Operating System – MS Windows XP Pro (sp2)

Quote from: BOSSKILLER on 17-May-08, 03:34:12
Have you done >>Clear CMOS Guide<<?
Cleared CMOS - no change same problem. Also, re-seated all connectors at same time.
Quote from: Wonkanoby on 17-May-08, 09:06:54
have you just added the second wd drive
are they jumpered right
jumperless if alone on ide
jumpered master /slave if two on it
No, second 40GB HDD was installed months before this issue started and is jumpered as slave drive. Also, no other additional hardware installed for several months before issue.

I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

I get the errer message "There is a problem with this windows installer package. A program required for this install to complete could not be run."

I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!

I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....

I am trying to upload itunes 10.5, but get a message "There is a problem with this Window Installer Pkg. A program required for this install to complete could not be run. Contact your support personnel or package vendor". What is it I need to do?

I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - Rick

Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter

HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

ITunes 10.5 Upgrade fails to Install. The Error Message is: "There is a Problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."

When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

How to re-install iTunes after receiving "There is a problem with this Windows Installer package ..." message?

Hi,
This is how it all started. When the new update for iTunes 11 came out, I tried to update it. After I had updated it I found nothing had changed. So i tried rebooting my computer and everything and found that still nothing had changed. So I tried uninstalling it. After that I tried to re-install it, but it came up with the
"There is a problem with this Windows Installer package ..." message. So I looked around the internet and found a website that told me to uninstall all Apple products. So i did that. When i tried to uninstall Apple Software Update, it came up with the 'problem with windows' message again. So I used Revo to uninstall it. So I rebooted and tried to install it again. It installed Bonjour and all of the other programs but stopped halfway and gave me the 'proplem with windows' message again. I've looked around and most of the solutions have been to try and repair Apple Software Update, but the problem is, I've already deleted it. So can someone PLEASSEEEE help me fix this problem! (Sorry for droning on)

http://support.microsoft.com/mats/Program_Install_and_Uninstall try this an see if it fixes it.

Problem with booting windows 7 (x32 & x64) on GX623

Similar Messages

Maybe you are looking for