Problem with Boris Title 3D

I've used it before for my music videos but I hit "reset style" and now there's a black background behind the text again and I don't know how to get rid of it.

Your title needs to go on V2 so that it is superimposed above the content on the V1 track.

Similar Messages

  • Perplexing Problem with Boris Title Crawl

    This has been an ongoing problem that occurs whenever I use Boris Title Crawl to create very simple titles (i.e lower third, scolling titles, etc). Within the HD sequence, the titles work as intended, but when I down convert the sequence or export the sequence containing the titles to a QT file (whether via QT conversion or compressor) this is where I get the problems. Titles which were once centered become right justified or visa versa. It doesn't occur with all of the titles and there seems to be no recognizable pattern. Sometimes the title will flip back and forth between centered and justified. Sometimes I go back into the sequence and re-edit the title. This may solve it, but then another title will be effected. This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.

    *This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.*
    Not an answer to your question... I've never used Boris title crawl. But a suggestion that might save you time when trouble shooting... You can just export the title sequence at the end of your show as a test to verify if it's working properly rather than exporting the whole thing only to find you still have an issue.
    rh

  • Problems with Boris Title 3D (Imbedded Software in Final Cut Express 2.0)

    Thanks for all your help on my previous problem...I have run into another though.
    As I mentioned before, I recently upgrade to OS X Tiger. I am running FInal Cut Express 2.0, as my editing software. (The following problem was not an issue before I upgraded.) Whenever I try to edit or creat on Title 3D graphic, which used the Boris Title 3D software, the software opens, but the editor does not, and therefore I cannot edit or create any graphics using this software.
    If you have any ideas on a solution, please let me know!

    No longer have FCE 2.0

  • Getting Smooth Text with Boris Title Crawl (Scroll)

    Hi, using FCP 5 (Studio) with Boris Title Crawl generator.
    It seems to work pretty well, does what it should, renders relatively fast, all that. The only problem is the upward scrolling motion is a little jumpy. Just wondering what things I should be tweaking or some general strategy for getting a smooth text scroll.
    The timeline is 10-Bit uncompressed NTSC so there aren't DV text issues here (or so I'd think). I'm trying different fonts, bold and sans-serif. It looks OK, but not broadcast (DVD actually) ready.
    Thanks everybody, much appreciated.
    Jason

    Thanks Jim, makes sense.
    To adjust speed, do you mean basically slightly change the length of the clip? I don't see any other place to alter that.
    Thanks,
    Jason

  • Creating Gutter with Boris Title Crawl

    Hello all!
    I'm doing the end credits for a DV project and as we all know Boris is better than Final Cut's text generators. Just wondering if there's a feature in Boris a la the * in FCP's Scrolling Text generator. You know, to line up those gaps. I've fidgeted and can't find it.
    Michael

    *This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.*
    Not an answer to your question... I've never used Boris title crawl. But a suggestion that might save you time when trouble shooting... You can just export the title sequence at the end of your show as a test to verify if it's working properly rather than exporting the whole thing only to find you still have an issue.
    rh

  • Mail problem with long titles using utl_smtp / mixed content / attachements

    Hello,
    I'm having a problem with sending emails. The title as well as the body needs to be able to contain accented letters (é ç ...).
    For the body i got it working.
    And the title works fine too, untill the encoding passes a certain length, then goes all wrong and my mail header starts showing up in the mail body.
    Could anyone help me in finding a solution?
    Thanks in advance
    Below my code:
    DECLARE
       v_From       VARCHAR2(80) := 'test@localhost';
       v_Recipient  VARCHAR2(80) := 'test@localhost';
       v_Cc         VARCHAR2(80);
    -- long subject causing problems
       v_Subject    VARCHAR2(32000) := '123456789111111111111111111111118888888888888111111111111111991234567891111111111111111111111188888888888881111111111111119912345678911111111111111111111111888888888888811111111111111199';
       v_body       VARCHAR2(32000) := '<a href="#">tester</a><br><br>en nog wat éékes en ççkes';
       v_Mail_Host  VARCHAR2(30) := 'localhost';
       v_Mail_Conn  utl_smtp.Connection;
       crlf         VARCHAR2(2)  := chr(13)||chr(10);
    BEGIN
      v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
      utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
      utl_smtp.Mail(v_Mail_Conn, v_From);
      utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
      utl_smtp.Data(v_Mail_Conn,
    -- write header
        'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
        'From: '   || v_From || crlf ||
        'Subject: ' || utl_encode.MIMEHEADER_ENCODE(v_Subject) || crlf ||
        'To: '     || v_Recipient || crlf ||
        'Cc: '     ||  v_Cc || crlf ||
        'X-Mailer: Mailer by Oracle UTL_SMTP' || crlf ||
        'X-Priority: 1' || crlf ||
        'MIME-Version: 1.0'|| crlf ||       -- Use MIME mail standard
        'Content-Type: multipart/mixed;'|| crlf ||
        ' boundary="-----SECBOUND"'|| crlf ||
        crlf ||
    -- add message body
        '-------SECBOUND'|| crlf ||
        'Content-type: text/html; charset=UTF-8'|| crlf ||
        'Content-Transfer-Encoding: base64'|| crlf ||
        crlf ||
        utl_raw.cast_to_varchar2(utl_encode.base64_encode(utl_raw.cast_to_raw(v_body)))||
        crlf ||
    -- add csv attachment
        '-------SECBOUND'|| crlf ||
        'Content-Type: text/plain;'|| crlf ||
        ' name="excel.csv"'|| crlf ||
        'Content-Transfer_Encoding: 8bit'|| crlf ||
        'Content-Disposition: attachment;'|| crlf ||
        ' filename="excel.csv"'|| crlf ||
        crlf ||
        'CSV,file,attachement'|| crlf ||   -- Content of attachment
        crlf ||
        '-------SECBOUND--'                            -- End MIME mail
      utl_smtp.Quit(v_mail_conn);
    EXCEPTION
      WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
        raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
    END;
    /

    Hi,
    I did not think the characterset and database would matter for this problem, but here is the info you requested.
    The database is an Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
    The characterset : NLS_CHARACTERSET     AL32UTF8
    And i don't have a clue about the characterset of the operating system (not even sure what the operating system is), but i think that will be utf-8 aswell.
    I'm not sure what i did, to come over as rude, but i didn't mean to and i apologize for it.

  • Problems with the Title Option in Adobe Premiere

    I am having a problem with this option because when it shows the title panel, it is very incomplete; it doesn't have as many option as it had before, such as color or shape options. It started happening when I tried to blur our somebody and pick an hoxigonal shape from the panel and a sign showed up saying that there was a problem and then the program would shut down and wouldn't open later on unless I restarted the computer. Now, it opening without any problem but the title panel is still very basic.

    What the other users have said is correct. Premiere captures through FireWire or through SDI/HDMI via a 3rd party solution.
    For your situation I would say the best bet is to connect you camera to your computer via USB or use a card reader and copy the entire directory to your hard drive and ingest into Premiere via Media Browser.
    If you Google 'how to make stop motion in premiere pro' there are tons of great tutorials.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • Problem with the Titler WIndow

    Hello,
    I don't know how it happened but the titler window is saparate in 2 windows : one with the title by it self and the other one with tools and buttons.
    How is it possible to have only one window again ?
    Thank you for your help and regards,
    Daniel

    Daniel,
    Though I would expect it to be in Eddie's link, you only need to go to Window (in the Toolbar at the top of the GUI), choose Workspaces, and then choose one of the default Workspaces listed, or any Custom Workspaces that you might have created. Hint: once you get a Workspace set up the way you like it, do save it as a Custom Workspace. Can save a lot of time later. I have about a dozen, plus the ones that ship/install with PrPro and use them for different tasks.
    Good luck,
    Hunt

  • IDVD problem with "Show title and comments"

    I am making a DVD for a neighbor. He has given me CDs with scanned old slides. He has over 1000 photos.
    I've got the DVD made in iDVD and everything is fine except in one of the slideshows.
    In iPhoto I have 22 albums of photos. When I'm in iDVD I go to "media" and I drag an album into the theme. After it is there I drag another album into that album I just drug. So what I'm doing is combining 2 albums into one slideshow thus having 11 slideshows in my theme. I then go into each slideshow while in iDVD and add music and go to "settings" and unclick "Show title and comments".
    After I have completed this for all slideshows I watch each slideshow before burning and everything looks fine. After the DVD burns (which takes 5 hours) I again watch the DVD on my television. In the first slideshow, and only the first slideshow, the first half is fine and then when it comes to the pictures that were in the second iPhoto album that I drug in the titles of each photo are coming up on the screen. All of the other 10 slideshows that I combined are just fine.
    I pitched the first DVD and tried to fix this by going into iPhoto and making a separate album that had all the pictures of thos first two initial albums. I then went into iDVD, deleted that problem slideshow and then added the slideshow that I had combined all the photos into that one album. I again make adjustment adding music and going into "settings" and unclick "Show title and comments". I watch the slideshow while in iDVD and everything looks fine.
    I burn another DVD and when I watch it on my television again that first slideshow has the first half of the pictures just fine and then the second half are showing the titles of each photo on the screen.
    Everything else in the DVD looks fine.
    The only other thing that might be of importance is when the DVD is ejected from the burner the screen says:
    "Current Operation"
    "Image Incomplete"
    I click Cancel and then it says:
    "Cleaning Up"
    "Image Incomplete"
    I again click Cancel.
    At this point iDVD freezes and I have to go up under the Apple symbol and do a Force Quit.
    Does anyone have any suggestions? I know I should try to make 2 DVDs out of all these photos instead of 1 but my neighbor was really hoping he could have all of them on 1.
    Thanks in advance for any and all help.

    Just drag them from the iPhoto Trash bin onto the Library icon just above it.
    OT

  • Problem with inserting title sheet in sequence

    Hi everyone,
    I've recently started using Premiere Pro CS5 so I've only mastered the basics, but up untill now everything went well.
    My problem is as follows:
    To add a title in a sequence, I could drag it from the Project Menu in my sequence or click on the right mouse button and select the option 'insert' or 'overlay'.
    Currently however, the right mouse menu does not display these options, i.e. they're grey and unclickable. Moreover, when I drag a title to the sequence, it automatically 'overlays' instead of 'inserting'.
    In order to insert a title in my sequence, I now have to open in in te Source Monitor (that option is clickable), choose 'insert' and drag the title in the sequence. It's quite laborious and frustrating, since I have a feeling it's just a matter of changing my settings...
    Could you please help me out on this one?
    Thanks!

    When editing from the Project Panel via right-click or keyboard shortcut, you must have tracks targeted in your sequence. Here's a comparison:
    Basically, you have to tell Premiere where you want the clip to be inserted or overlaid, and that's accomplished with the track selectors being on or off.
    Moreover, when I drag a title to the sequence, it automatically 'overlays' instead of 'inserting'.
    Hold down the Control/Command key to do an insert edit; you'll see the mouse pointer change to indicate the different type of edit.

  • Problems with the Title

    I have problems in creating new titles. I did alreday a few titles but now it is not possible to create new ones.
    I can only press the button preview, but the update button is not active.

    Hello Galfi,
    the update button should only be active when selecting an already created title and thus trying to change it's settings. have you tried simply dragging and dropping the title in the desired location?
    hope this helps
    viva la mela

  • Problems with Motion title

    I am trying to create a title using one of Motion's pre-made template's but every time I try to import the picture it does not fit the drop zone and I can't resize it or anything. I am very new to Final Cut Studio, I worked with Final Cut Pro a while back but I have not done a whole lot with Motion. I am trying to create some good looking titles for a fitness company that hired me, but I have not had so much luck. If anyone could give me a link to some good tutorials or has some good advice, I would greatly appreciate it.
    Thanks!

    Not sure which template you're using, but there is a Fit parameter with drop zones. Select the drop zone and click on the Image tab in the Inspector. Under the Fit parameter, make sure it says, "Fit" and not Center or Stretch.
    Andy

  • Problem with page title language

    Hi all,
    I have several iViews of level 2 and I need to navigate from one iView to another. When I do it just by mouse clicking in navigation area - everything is allright. But when I navigate by means of WDPortalNavigation.navigateRelative method - I have page title something like this: %12%A4%43%B3%34...
    Does anybody knows the reason of this?
    String [] path = {"iViewName"};
    WDPortalNavigation.navigateRelative( null, 1, path, WDPortalNavigationMode.SHOW_INPLACE, null, null, WDPortalNavigationHistoryMode.NO_DUPLICATIONS, "iView title", null, "param="+param, null,true,true);
    I use local language for iView title, not english.

    I'm sending the files zipped yes. I thinks it's better like that. Isn't it?
    Yes.
    They are not necessarly using the same version. I will ask them to get the last one so we will have all the same.
    Perhaps that will help. You should also make sure they have the same Arabic fonts on their machines that you used for your file.

  • Problem with using titles in imovie 05

    im trying to add text to clips and i can write it and preview it but my update button is greyed out...someone help me please

    Forget This Network
    Settings>Wi-Fi>tap little arrow on right of network.
    http://i1224.photobucket.com/albums/ee374/Diavonex/ea2bf71cacb51e31d8a771a9f29d7 486.jpg

  • Boris title 3d

    Hello, I got a sequence with subtitles made with Boris title 3D and FCP HD. After upgrading my system to FCP studio 5.1 I am not able to open this sequence anymore. It crashes on the Boris plug in. Are the two Boris title 3D versions not compatible?
    Any ideas?
    Thanks,
    Rob.

    Has anyone bothered to search for an answer?
    A quick search for BORIS 3D yielded more than 100
    hits n about forty-five threads. Many possible
    causes, many different symptoms.
    The results were not encouraging because the OPs
    rarely came back to close the threads and we just
    hate that around here.
    Time for you guys to start sifting through the posts
    for situations in the threads that resemble your
    individual situations.
    bogiesan
    I also spend a lot of time going through threads to make sure my problem has not been answered before, I really do hate to waste peoples time.
    Michael,
    thanks for your reply, i will try and find a program for corrupt fonts and post my findings.
    Cheers.

Maybe you are looking for