Problem with BPC 10 REST SERVICE. (Write-Back  BAdI)

Hello!
We have implemented a Write-Back BAdI order to write values ​​to a parent and copy those values ​​to their children in the hierarchy. Proper operation.
Then through the Default Logic we are making various calculations (many to be honest), based on the data recorded with the Write-Back BADI.
The problem arises when we try to write in a parent hierarchy with many children.
We receive the following message in Excel.
We have configured the service as follows
The transaction st22 says nothing about our problem.
If I go to log the EPM Add-in for Excel see the following. A problem with REST service (I think that is the PROBLEM)
Write-Back BAdI writes values properly.
Thank you!

Thanks for answering.
Yes, if I try to write in a parent without Default.lgf there is no problem. I performed the test to the parent node of all hierachy.
I send the Default.lgf and the others scripts .
I think the problem is that the communication between BPC and Netweaver is lost, which is done through the REST service??
thank you very much.

Similar Messages

  • Write back Badi

    HI Everyone,
    We have developed Write Back Badi, Which does distribution values equally at two different Parent level (Entity, Product) and all other base members and working fine
    Actually there are some accounts we have called percentage rate accounts.
    If I plan at this all rate accounts against Parent level and all base members. It has to distribute the same value to all Base members and should not roll up.
    Ex: If I plan 4% value at any rate account against parent level, Then BAdi has to be distribute same 4% value to all base members and Value of Rate account is same 4%, So it should not be the roll up
    I used below code to distribute same value to all base members for specific accounts and account is getting roll up.
    Please let me know how to solve this issues.
    "IF SPD_account is anything other than the accounts below then ELSE part will be executed
    IF <zlf_chk> = 'Drivers_001_01_N' OR <zlf_chk> = 'Drivers_002_01_N' OR <zlf_chk> = 'Driver_003_01N' OR <zlf_chk> = 'Driver_003_03_N' OR <zlf_chk> = 'Driver_003_05_N' OR <zlf_chk> = 'Driver_003_07_N' OR <zlf_chk> = 'Driver_004_01_N'.
              " Avoid divide by zero
              IF l_num_base > 0.
                <l_keyfigure> = <l_keyfigure>.
                " Copy N times with new base members
                LOOP AT lt_SPD_PRODUCT_mbr ASSIGNING <l_base_mbr>.
                  <l_SPD_PRODUCT> = <l_base_mbr>.
                  " When IF_CALC_DELTA = true, appending means the latest records take effects,
                  " previous records with same dimension member will be overwritten.
                  " The newly appended records will also be looped and processed.
                  APPEND <ls_record> TO ct_array.
                ENDLOOP.
              ENDIF.
            ELSE.
              IF l_num_base > 0.
                <l_keyfigure> = <l_keyfigure> / l_num_base.
                " Copy N times with new base members
                LOOP AT lt_SPD_PRODUCT_mbr ASSIGNING <l_base_mbr>.
                  <l_SPD_PRODUCT> = <l_base_mbr>.
                  " When IF_CALC_DELTA = true, appending means the latest records take effects,
                  " previous records with same dimension member will be overwritten.
                  " The newly appended records will also be looped and processed.
                  APPEND <ls_record> TO ct_array.
                ENDLOOP.
              ENDIF. " divide by zero
            endif.
            " Remove the old one
            DELETE ct_array.

    Hi Vadim,
    Let me explain,
    The rate accounts (Drivers_001_01_N, Drivers_002_01_N, Driver_003_01_N, Driver_003_03_N, Driver_003_05_N, Driver_003_07_N, Driver_004_01_N )
    If I plan at this all rate accounts against Product (Pharmaceutical Bx- Parent level - Please see the hierarchy below). It has to distribute the same value to all Base members(SKU) and should not aggregate.
    Ex: If I plan 4% value at any rate account against Pharmaceutical Bx, Then BAdi has to be distribute same 4% value to all seven base members(SKU) and Value of Rate account is same 4%, So it should not Aggregate.
           Currently it is distributing 4% Value to all the base members and it is rolling up to 28 for Rate accounts.
    -Viswanath

  • Capture comments in write back badi!!!!

    Hi All,
    Can I capture comments inside write back BAdI?
    i checked to read comments table but the comment table is not updated by then.....
    is there a way i can get comments updated in the same input schedule that triggers the write back BAdI?
    Kind Regards,
    Surya Tamada.

    Thats a very big story mate!!!!!
    Client wants to plan at contract level (highest granular) and he wants to enter some text as the description of the contract. Now I have to read this in the write back badi and dynamically generate a new contract ID and capture the comment and save this comment as the EVdescription of the newly generated contract ID.
    If i have this comment flowing through Write Back Badi then i can update the masterdata with the newly generated contract id and assign the comment to the EVdescription of the contract ID.
    If you need to know more..... please let me know.... i can elaborate the situation and let you know......
    Regards,
    Surya Tamada.

  • Problem with reversal of Service entry Sheet

    Hi All,
    I am facing a problem with reversal of service entry sheet. The user has posted the document in dec 2009 and now the user wants to reverse the doc. I told the process how to reverse it. But when she is trying to revoke the acceptance, she is getting error log.I told her to reset the posting date to present date.Now she tried to change the doc date but she is getting error as "604 item 010 WBS element ****** budget exceeded year 2009". So i advised her further to increase the budget in the year 2009. Even that solution is not working.
    Please help in this regard
    Thanks & Regards
    Nisha Prasad

    Hi,
    The user is not authorised to change the budget. The person resposible for this is telling that increasing the budget wont help. can you tell me how to view whether the budget is available for the system in the period or not? Can you please help me in this regard?
    Thanks
    Nisha

  • Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

    Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

    Not here;  updated three systems without issues.
    Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
    Russ

  • Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an e.mail i can use in Apple USA? Thanks.

    Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Validate Journal Entries using write back BADI (UJR_WRITE_BACK)

    Hi Experts
    I need to validate journal entries such that the total credit and debit postings for each COMPANY is equal. Also I need to do the same validation by PROFIT CENTER. After doing a bit of research I found out that the best way to do it is by coding it in the write back BADI.
    Has anyone faced such a situation before? Is there any better way to do it? Can anyone share the code?
    Thanks
    Edited by: Shisher Chakrabarty on Mar 1, 2012 10:22 AM

    Hi Shisher,
    Please check the below guide for Write Back BADI. The doc has also got the source code for the same.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0309226-814f-2d10-61a6-ef8da29e3727?QuickLink=index&overridelayout=true&48056389302995
    Regards,
    Raghu

  • BPC75NW: Query on write-back BAdI

    Hi,
    I have a requirement wherein for 2 set of input schedules that are based on same APPSET and APPLICATION, have different ABAP logic to be built through write-back BAdI.
    I try to built a second BAdI to put in the logic for second set of input schedules. But the resultant filter criteria comes out to be same as in the first write-back BAdI, which results in error during activation of object.
    Possible solution: I will not be able to alter the filter criteria; but during run-time, is it possible to check the input schedule that invokes the write-back BadI, so I can put the IF at the start of logic to process either for first or second set of input schedules.
    Regards,
    Pankaj

    Hi Rich,
    Thanks for the reply. 
    Currently as a work-around, I read CT_ARRAY, which has account dimension as a column.
    The values coming in CT_ARRAY (for time-being) are different for the first and second set.
    So I have written READ TABLE.. for certain values of first set and for certain other values for set 2.
    I guess the CL_UJ_CONTEXT class will give me the information about members on current view, which is kind of similar to my current work-around.
    Going ahead I anticipate to come across scenarios when the current view remains identical and we need to process the logic based on the input schedule that invokes the BAdI.
    Anything identifying the source input schedule should be perfect.
    Regards,
    Pankaj

  • I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

    I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

    If you are dissatisfied with the Service you have received and wish to Contact Apple...
    India
    Start your support request online and we'll connect you to an expert.
    (91) 1800 4250 744
    www.apple.com/in/support/
    From the above Link...
    To Contact Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57

  • HT6114 i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version.

    i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version. Any solution?

    This from the crash log
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/Accounts.framework/Versions/A/Accounts
      Referenced from: /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
    indicates there is a missing library on your system. What problems were you having before that caused you to delete Safari? How did you delete it?
    You're best bet in this case is to re-install the OS. While doing a re-install will not normally harm your user data having a good working backup in cases like this is essential.

  • After upgrading to firefox 3.6 I have problem with hotmail email service

    after upgrading to firefox 3.6.4 I have problem with hotmail email service, however I can login in hotmail, I can't open mails or delet or do anything else with them.
    == URL of affected sites ==
    http://hotmail.msn.com

    Thank you, but I already have "always show tabs bar" set.
    Also, I have two computers and the other is running the exact same version of Firefox, and the exact same theme, but it does not have this problem.
    To make sure I'm being clear: there is an "x" on each tab that allows me to close it when I have multiple tabs open. When I have only one tab open, there is no "x"; so in order to close the webpage I have to open another empty tab, and then close the first. My other computer has the "x" to close the tab visible even when there is only one tab so that I can close the page and have an empty (marked "(untitled)" tab). Please help!

  • InfoPath combined with Excel Rest services gives State service error

    Hi
    I'm having a problem with InfoPath and Excel Services. I have a InfoPath form that calls Excel to do a fairly simple calculation, but I also have another form at a client that is doing the same calling a much more complicated function.
    The error I get is
    SharePoint Server
    State Service
    bm1k
    Medium
    StateSqlSession.GetItemBytesInternal() Locked row in database for key ba18f90ee2e844468b08e90ad96dff2c_05967b71a21948d39b7d4d3ada9b27c9 for 4 seconds
    SharePoint Server
    State Service
    bm0t
    Unexpected
    StateManager.GetState() Locked data (05967b71-a219-48d3-9b7d-4d3ada9b27c9)
    InfoPath Forms Services
    Runtime - State Service
    b5st
    Medium
    MOSS StateService threw an exception: A Microsoft SharePoint Server State Service error occurred while processing your request. For more information, contact your server farm administrator.
    I have determined that if the user is in the Members group, then it works, but as soon as the user is in another group, it gives the error. I have played around with permission levels, given the user all rights, but it still gives that error.
    Does anyone have any idea about what might be the problem? I have thought that it's a problem on the state service, but it isn't configurable. I don't want to resort to put everyone into the Members group, as that doesn't seem to be a solution that will
    work with everyone. We are on the June 2012 CU.

    Thanks Sergio. I tried that but unfortunately didn't fix the problem. I have given the groups Contribute rights, Full Control rights, create my own custom permission level, nothing works except when the user is in the Members post. 
    I realised today that the error I posted above is a bit misleading. The error that happens first before that one is this (after removing timestamps and correlations):
    Entering monitored scope (Request (POST:https://<server>/ContentHub/_layouts/Postback.FormServer.aspx))
    Name=Request (POST:https://<server>/ContentHub/_layouts/Postback.FormServer.aspx)
    Site=/
    Access denied.
    Thread was being aborted.
    Not persisting state for request due to previous errors. Form Template: urn:schemas-microsoft-com:office:infopath:Expense-Claims-With-Excel:-myXSD-2004-12-26T20-14-04
    Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type
    'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
    at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
    at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
    at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.IsDefined(GlobalItems key)
    at Microsoft.Office.InfoPath.Server.Controls.DateFormattingInfo.TryGetCachedTimeZoneId(UInt16& timeZoneId)
    at Microsoft.Office.InfoPath.Server.Controls.DateFormattingInfo.GetSPTimeZoneObject()
    at Microsoft.Office.InfoPath.Server.Controls.DateFormattingInfo.CalculateSPLocalTimeOffset()
    at Microsoft.Office.InfoPath.Server.Util.GenericUtils.GetServerTimeZone()
    at Microsoft.Office.InfoPath.Server.DocumentLifetime.ErrorPageRenderer.RenderResult(TextWriter writer, Document document, EventLogStart eventLogStart)
    at Microsoft.Office.InfoPath.Server.DocumentLifetime.ErrorPageRenderer.RenderForException(HttpContext context, Exception exception, Document document, EventLogStart eventLogStart)
    at Microsoft.Office.InfoPath.Server.Controls.PostbackPage.OnPreInit(EventArgs e)
    at System.Web.UI.Page.PerformPreInit()
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    The error I first posed is I think the reaction to this exception. The strange thing is that the user can access the spreadsheet fine. When I go to the URL that is used for the rest service and just remove the $format parameter, it displays it fine as a HTML
    value.

  • Is anyone else having a problem with a "no service" issue on the iPhone 5?

    There are times my phone will go to "No Service" when the signal is low. I just got the iPhone 5. I did not have this problem with my 4. It doesn't say "searching..." it just automatically says "No Service" for a few seconds and then back to having bars. It comes and goes. I had my phone replaced at the Genius Bar and still have this problem. Is anyone else also having this problem? I hope it's just a software issue they will solve with an iOS update.

    I have this problem all the time. when i get back home from a overseas trip (about 3-4 times a month) I have to turn airplane mode of and on a few times to get rid of the "No Service" message.

  • Problems with Apple Photo Services

    I've been having problems with Apple's Photo Services. The first time, I'm pretty sure I didn't crop some pics correctly, but they were gracious enough to refund my $$. However, then I got serious about cropping in Aperture 2, and double-checked everything before submitting them. The 20 x 30s were fine, but the 16 x 20s were all screwed up. My $ was refunded for these, but I can't figure out whether the problem is mine, or in the transmission of the pics, or something that went wrong in the Photo Service. When I complain, they always send back a small pdf of what they claim they received, and it always matches what they printed. But that's not what I sent them.
    Anyone else have these problems? Might it be a bug in Aperture 2?
    Sean

    When I do a bulk export from Aperture 2, to anywhere, (flickr, Photoshelter, a set of files, gallery), randomly, (about 2 in thirty images are affected).
    The effect is stretched non-centerd cropping. I think it only affects random cropped images. Not all cropped images, but I am not sure about non-cropped images. ...
    The extra effort to go back to the export, after the fact, just to check up on the quality exported images is a waste of my time, but now made necessary.
    The thing that bothers me the most is that selecting the images that have been exported with the problem and then re-exporting those images produces, for me, the export I originally expected without the errors.

Maybe you are looking for