Problem with BPM tutorial in WLI2.1

Hi all,
I got a problem while running the BPM Tutorial in WLI2.1 which is
about Purchase Order. I have import Tutorial.jar and set active to the
workflow. When the workflow start and flow to the node "Check
Inventory", an exception threw as shown:
The server was unable to complete your request.
System error: Unable to load class object for remote interface of type
"com.bea.wlpi.tour.po.PurchaseOrderHome";
java.lang.ClassNotFoundException:
com.bea.wlpi.tour.po.PurchaseOrderHome.
Workflow error: com.bea.wlpi.common.WorkflowException: Unable to load
class object for remote interface of type
"com.bea.wlpi.tour.po.PurchaseOrderHome";
java.lang.ClassNotFoundException:
com.bea.wlpi.tour.po.PurchaseOrderHome.
<<no stack trace available>>
I used the domain "bpmdomain" in WLI2.1. It seems to me that the
Business operation was set properly and the related EJB can be called by
writing an EJB client. But why the BPM can't call that EJB create()? Is
there anything I have missed to set?
Thx a lot.
Regards,
Karen

Sounds like something's messed up. Make sure pobean.jar is in
$WLI_HOME/lib, and deployed in config/bpmdomain/config.xml as part of the
WLI Application.
"Karen Law" <[email protected]> wrote in message
news:[email protected]..
Hi all,
I got a problem while running the BPM Tutorial in WLI2.1 which is
about Purchase Order. I have import Tutorial.jar and set active to the
workflow. When the workflow start and flow to the node "Check
Inventory", an exception threw as shown:
The server was unable to complete your request.
System error: Unable to load class object for remote interface of type
"com.bea.wlpi.tour.po.PurchaseOrderHome";
java.lang.ClassNotFoundException:
com.bea.wlpi.tour.po.PurchaseOrderHome.
Workflow error: com.bea.wlpi.common.WorkflowException: Unable to load
class object for remote interface of type
"com.bea.wlpi.tour.po.PurchaseOrderHome";
java.lang.ClassNotFoundException:
com.bea.wlpi.tour.po.PurchaseOrderHome.
<<no stack trace available>>
I used the domain "bpmdomain" in WLI2.1. It seems to me that the
Business operation was set properly and the related EJB can be called by
writing an EJB client. But why the BPM can't call that EJB create()? Is
there anything I have missed to set?
Thx a lot.
Regards,
Karen

Similar Messages

Problem with BPM Receive step

Hy all,
I have a strage Problem with a BPM Definition into a receive step. I receive from SAP System IDoc and (per dynamic receive determination) I receive it into BPM.
But the Block that contains the receive Step can't be executed. I get following error message from XI :
Error when executing work item '000000177354'
Error when starting work item 000000177354
Work item 000000177345: Object FLOWITEM method EXECUTE cannot be executed
Error when executing work item '000000177354'
Runtime handle of object type could not be created
Exception 'ex_EDIFactOrder_received' caught and transferred to the exception handler
Error when executing work item '000000177354'
Could anyone help me please.
Thank's a lot.
Mat

I have following scenario :
Block 1
1) Infinite Loop with receive step
2) exception creation (2 minutes) (parallel to 1))
3) exception handler (parallel to 1))
Block 2
1) Mapping steps + send Steps + container Operation steps (set of flag)
2) Exception handler (paralle to 1))
Block 3
1) receive steps (where I get the error message)
I hope it's OK
Cheers
Mat

Problem with Photoshop tutorial

I'm trying to follow this tutorial here,
http://www.layersmagazine.com/photoshop-cs4-a-picture-worth-a-thousand-words.html
Which is turning a portrait into a portrait of words, and i'm having a problem with step 9.
"9 PASTE INTO A LAYER MASK
Show all layers and activate the layer with the painted words. Click on the Add Layer Mask icon at the bottom of the Layers panel to add a layer mask. Hold down Option (PC: Alt) and click on the layer mask thumbnail (this will hide the painted text and show just the mask). Press Command-V (PC: Ctrl-V) to paste the copied pixels onto the mask. Press Command-D (PC: Ctrl-D) to Deselect. Press Command-I (PC: Ctrl-I) to Invert the mask (your mask should look like a negative of the black-and-gray pixel image that you pasted)."
When I paste, the image comes up in a new layer, and not on the mask. I've gone over it multiple times, and went back to previous steps to make sure I did everything right, so i'm not sure what the problem is. Can anyone help?
Thanks,
Brian

Did you Alt click on the mask thumbnail
(the image turns white) and then paste?
MTSTUNER

Problem with BPM: no receive step found for message ....

Hello,
I have the follwing problem with a BPM ina PI 7.3 system.
I created a BPM for the following 'process':
We will receive an IDOC from SAP ECC, then call a synchronous webservice and finally send the result back to ECC.
I created my BPM.
Now when I send the IDOC, the interface is triggered but it gets stuck in the queue with message 'No receive step found for message ...'. I get this message when I go to Tx SMQ2 and try to simulate the message
I have already refreshed the CPA cache without result however.
in SXI_CACHE I can find my IP* and the status = '0' ( So i guess this is OK )
I do not use correlations in my BPM.
In my configuration I can find my sender agreement and interface determination towards the service (abstract) which is defined in the receive step of the BPM.
Does anybody have any ideas what can be wrong ?
Thanks,
Erwin
Edited by: Erwin Van Lysebetten on Oct 27, 2011 10:37 AM

Hi Erwin, delete Integration Process in the Directory Integration and import it again.

Problem with BPM fix

We all know about the BPM switch fix for finding and removing dead entries from iTunes, but I have encountered a (big) problem with this. Actually, two problems, one big, and one slightly smaller:
1. As anyone who has done this knows, it takes quite a while to write the new information to all your files, especially if you have a lot (I have 5000 songs).
2. The bigger problem is that once you do this, syncing with you iPod takes over an hour, because every file has to be replaced.
I don't understand why iTunes can't just let show you a list of all the files that it can't find, instead of having to use a ghetto workaround like the BPM switch. If anyone has any OTHER workaround that doesn't cause this to happen, please let me know...I'll be here for a while as I wait for my ipod to finish updating....

I don't know what the "BPM Fix" is, but my fix for removing for finding dead entries is much simpler.
Download one of these scripts:
http://otto.homedns.org/itunes/RemoveDeadTracks.txt
http://otto.homedns.org/itunes/FindDeadTracks.txt
Save them to your hard drive and rename them to have a ".js" extension.
While iTunes is running, double click one of them to run them. The Remove one will remove all dead tracks from your library. The Find one will just create a text file with the names of these tracks instead.
"Dead tracks" being anything that will have a ! beside it in iTunes.
*The RemoveDeadTracks script is the same one included in Apple's iTunes COM SDK. It's unmodified.
*The FindDeadTracks script is my modified version of same.

Problem with Composition Tutorial

Hi at first,
I am new to this forum as well as new to the SAP composition application topics
Since I want to learn how to build composite applications with the Netweaver Developer Studio/ Process Composer I started with the tutorial "Getting Started with Composite Designer" included in the Studio.
If I follow the instructions up to modeling of data objects the final step of generating the tables of the emplserv.bl.caf package fails with the error message:
com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Problem with WSDL file parsing. See nested message.
Problem with WSDL file parsing. See nested message.
IO Exception occurred while parsing file:unknown protocol: c
unknown protocol: c
Can anyone help me with this problem?
Thanks in advance

Hi Felixw,
You are probably using JDK 1.6 instead of JDK 1.5.
Please adjust the startup -vm parameter to be the javaw.exe of JDK 1.5 and you are just fine!
For instance:
C:\IDE\eclipse\SapNetweaverDeveloperStudio.exe -vm "c:\jdk1.5.0_18\bin\javaw.exe"
Kind regards,
Ivan

Problems with JGSS tutorial - AccessControlException

Hi all,
unfortunately I've got a big problem with the ClientServer JGSS tutorial.
After doing everything like the HTML file said, I firt started the server and then the client.
The client then produces this exception:
Kerberos username [stnt1]: myName
Kerberos password for benni: myPass
java.security.AccessControlException caught
access denied (javax.security.auth.kerberos.ServicePermission SampleServer/[email protected] initiate)
java.security.AccessControlException: access denied (javax.security.auth.kerberos.ServicePermission SampleServer/[email protected] initiate)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
     at java.security.AccessController.checkPermission(AccessController.java:401)
     at java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
     at sun.security.jgss.krb5.Krb5Context.checkPermission(Krb5Context.java:1089)
     at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:527)
     at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:213)
     at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:158)
     at SampleClient.main(SampleClient.java:150)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at MyAction.run(Login.java:241)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
     at Login.main(Login.java:200)
... and I really don't have any clue about why exactly I'm getting this error.
Thanx a lot for hints and help ...
Benjamin

Hi again,
got it ... I hat my computer name written wrong in the start script.
Bye,
Benjamin

Problem with BPM Configuration

Hi,
   I'm not able to get the process of BPM Configuration.
My Scenario is
        File->R/3(BAPI)->File(Response),through BPM
   1.Do i need 2 Business Service?
   Is the flow like this?
      File->IP->SAP->IP->File.
   If it is correct then why do I need Business Service?
   Correct me if i am wrong.
   I'm very much confused with BPM,Need Help.
Regards,
Prashanth K.R,

Hi Prashanth,
>>1.Do i need 2 Business Service?
no you don't need 2 one is enough
but in fact sometimes it's good to have two...
let's say one folder ackts as a foderl for storing XML files on one server for CRM data
the second on is for txt data for EDI
if you use two then you know which folder is responsible for what...
BTW
use can define Business Service in less then 20 seconds
>>>File->IP->SAP->IP->File.
If it is correct then why do I need Business Service?
you use business services to define that file adapter
is not connected to any other application
if you just use a file folder on ftp then you have to create a business service to define the sender/receiver
Regards,
michal
Message was edited by: Michal Krawczyk

Problem with OrderBooking tutorial

A little problem...when i do obant in PriceQuote I have no problem with RapidDistributors but with SelectManifacturing I have:
all:
[bpelc]Convalida BPEL non riuscita
lettura file wsdl non riuscita...
in TaskManager?wsdl perchÃ¨ ...PARSER ERROR...
Accertarsi che il file esiste nella posizione specifica...
soluzione:Se il sito dispone di un server proxy puÃ² essere necesssario configurare BPEL server, designer e browser con le impostazioni del server proxy.
I have not proxy server!But in Preferences I have put (as the guide says) localhost|127.0.0.1 in exception.
Thanks,
Ema

BPEL Process Manager 10.1.2 GA
Bpel designer
Oracle IDE     10.1.2.17.84
Business Components Version     10.1.2.17.96
UML Modelers Version     10.1.2.16.71
Versioning Support     10.1.2.16.71
WebDAV Support Version     10.1.2.16.71
Struts Modeler Version     10.1.2.6.15
BPEL Designer     10.1.2.0.0 (Build 050504)
Designer Generators Framework     10.1.2.7.56
ADF UIX     2.2.16
java.version     1.4.2_06
java.home     C:\Programmi\OracleBPELPM1\jdk\jre
java.vm.name     Java HotSpot(TM) Client VM
java.vm.vendor     Sun Microsystems Inc.
java.vm.version     1.4.2_06-b03
user.language     it
user.region     <no value assigned>
user.name     emanuele
user.home     C:\Documents and Settings\emanuele
user.dir     C:\Programmi\OracleBPELPM1\integration\jdev\jdev\bin
os.name     Windows XP
os.version     5.1
os.arch     x86
Ema

Problem with HelloWorld tutorial

As I created HelloWorld process based on tutorial http://st-curriculum.oracle.com/obe/fmw/obpm/11g/r1/firstProcess/firstprocess_obpm11g.htm
Deployment fails with exception. Anybody can help with this?
java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM
-70812: Process 'HelloWorldProcess' not found. Cause: The specified process was
not found. Action: Check that the name of the process is correct
at oracle.bpm.bpmn.engine.model.ModelCreator_FromMetadata.createModel(Mo
delCreator_FromMetadata.java:66)
at oracle.bpm.bpmn.engine.model.deploy.schema.BpmnDesignSchema.init(Bpmn
DesignSchema.java:203)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.deploy(BPMNServiceEn
gine.java:406)
at oracle.bpm.bpmn.engine.service.BPMNServiceEngine.deploy(BPMNServiceEn
gine.java:104)

Im facing the same problem, the same stack trace but I'm trying to deploy two BPMN processes into my composition. Any idea??
<Nov 1, 2010 5:40:45 PM CST> <Error> <oracle.integration.platform.blocks.deploy.servlet> <SOA-21037> <Sending back error message: Error during deployment: Deployment Failed: Error occurred during deployment of component: Resguardo to service engine: implementation.bpmn, for composite: PSDProcesses: java.lang.NullPointerException..>
java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'Process2' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct

Problems with BPM

Hi,
I am working in the following scenery: File->BPM->File.
For this scenery I am using the document http://weblogs.sdn.sap.com/pub/wlg/1822. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I executed all the steps that are described in the document above. My doubt is in the transaction sxmb_moni only appears my outbound interface sending data for my BPM. This message appears as success. Why doesn't the message of my BPM appear sending data for my inbound interface?
Another subject is when I execute the transaction sxmb_moni_bpe is asked to select a work item. What is work item? Which work item should select?
Thanks,
Sérgio

Hi Satish,
I used tcode sxmb_moni, click PE and I saw this:
Object Type: ZXI_PROXY_MI_FILE_TO_BPM__0001
Event: Received
Status: Waiting because of e.
In my column with name "C" that corresponding "Outbound Status" appear a red flag. Is this normal? What should it appear?
Thanks,
Sérgio
Have you ever see this message?
Will I need any configuration to resoolve this problem?

Strange problem with BPM

I have BPM
Blok1
Send Async step: Acknowledgement: Transport
Exception brach: CannotInsert
Deadline brach: Throw Exception CannotInsert
Block2
Mapping
Send
<b>BPM Monitoring</b>
Mapping
Workflow System Background work item created 13:33
Workflow System Background Processing Started 13:33 tRFC Entries
Workflow System Work Item Processing Complete <b>14:02</b>
Workflow System Result Processing             14:02
When I click on mapping I see
Current Creation 13:33 Start 14:02 End 14:02
When deadline throws an exception   mapping works ~ 30 min
I have the same problem in other BPM with deadline.
Could someone explain me what is wrong with my BPM?
Message was edited by: Sergey A

Sergey,
You can set different options for the deadline branch. You should choose 'Creating the step'. This will cause deadline branch being triggered after 30 minutes of creating the first block.
You can also select e.g. 'Creating the process', this will cause the deadline to be triggered 30 minutes after creating the process, whereever the process is at that moment.
Kind regards,
Christiaan Schaake.

New to JDeveloper, having problems with EJB tutorial.

Hi,
I'm new to the world of JDeveloper, I'm trying to follow this tutorial
http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/ejb/ejb.html
Firstly when I create an entity from a table I get the following error;
Starting Offline Database Synchronization
Generating classes for Entity CbsdSecurity...
Entity generation for CbsdSecurity failed.
I'm not really sure why this is, however I suspect this is at the heart of the problems.
If I continue I can get to the point where I create a EJB Diagram, however when I try to drag my autogenerated class onto the diagram I get the following error;
"Entity does not belong to Persistence Unit xxxxEJB which is associcated with Diagram EJB3.ejb_diagram"
In addition the log at the bottom has the following warnings.
23-Sep-2010 10:07:46 oracle.security.jps.internal.credstore.ssp.CsfWalletManager openWallet
WARNING: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
23-Sep-2010 10:07:53 oracle.adf.share.jndi.ReferenceStoreHelper getReferencesMapEx
WARNING: Incomplete connection reference object for connection:fcs2ukd
Now my database connection doesn't seem to remember the password even though I have ticked the 'remember password' tick box.
I am developing under Windows XP using JDK1.6.0.21
If anyone could point out what I'm going wrong I would be very grateful.
Thanks
Rich
Edited by: Rich Carless on Sep 23, 2010 9:32 AM

Try to test Your DB connection in JDeveloper. Is it success?
Best regards, Debuger!

Problem with BPM workspace - Failed to compile JSP /bpmHome.jsff

Hi
I have instaled SOA Suite 11gR1 (11.1.1.5.0). All console woks, except bpm workspace. I have following error after login
Incident Id: 3
Incident Source: SYSTEM
Create Time: Thu Sep 22 09:21:36 CEST 2011
Problem Key: BEA-101017 [HTTP][weblogic.servlet.jsp.CompilationException]
Application Name: OracleBPMWorkspace
Error Message Id: BEA-101017
Description
Incident detected using watch rule "UncheckedException":
Watch time:             2011-09-22 09:21:36 CEST
Watch ServerName:       soa_server1
Watch RuleType:         Log
Watch Rule:             (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
Watch DomainName:       SOADomain
Watch Data:
   DATE : 2011-09-22 09:21:36 CEST
   SERVER : soa_server1
   MESSAGE : [ServletContext@9413464[app:OracleBPMWorkspace module:/bpm/workspace path:/bpm/workspace spec-version:2.5], request: weblogic.servlet.internal.ServletRequestImpl@31c41d[
GET /bpm/workspace/faces/jsf/worklist/worklist.jspx?_afrLoop=4649677285821&_afrWindowMode=0&_adf.ctrl-state=7b5s8pm1s_4 HTTP/1.1
User-Agent: Mozilla/5.0 (X11; U; Linux i686; pl-PL; rv:1.9.2.13) Gecko/20101209 CentOS/3.6-2.el5.centos Firefox/3.6.13
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: pl,en-us;q=0.7,en;q=0.3
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-2,utf-8;q=0.7,*;q=0.7
Keep-Alive: 115
Connection: keep-alive
Referer: http://localhost:8001/bpm/workspace/faces/jsf/worklist/worklist.jspx
Cookie: JSESSIONID=XS3VT6hZBFLPZvqGZsnjQWnhgG06NTnDHMX9QY8Wbf1FvBZ4QYTK!-276213214
]] Root cause of ServletException.
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /bpmHome.jsff
Exception occurred while processing '/home/kuba/Oracle/Middleware/user_projects/domains/SOADomain/servers/soa_server1/tmp/_WL_user/OracleBPMWorkspace/jx2oeu/war/bpmHome.jsff'java.lang.NullPointerException
     at weblogic.jsp.internal.jsp.JspParser.jspParse(JspParser.java:1092)
     at weblogic.jsp.internal.jsp.JspParser._parse(JspParser.java:604)
     at weblogic.jsp.internal.jsp.JspParser.parse(JspParser.java:597)
     at weblogic.jsp.internal.jsp.JspAnalyzer.parseFile(JspAnalyzer.java:104)
     at weblogic.jsp.internal.jsp.JspAnalyzer.parse(JspAnalyzer.java:92)
     at weblogic.jsp.internal.ProxySourceFile.parse(ProxySourceFile.java:106)
     at weblogic.jsp.internal.SourceFile.getAst(SourceFile.java:559)
     at weblogic.jsp.internal.SourceFile.getAst(SourceFile.java:533)
     at weblogic.jsp.internal.SourceFile.check(SourceFile.java:335)
     at weblogic.jsp.internal.ProxySourceFile.codeGen(ProxySourceFile.java:224)
     at weblogic.jsp.internal.SourceFile.codeGen(SourceFile.java:327)
     at weblogic.jsp.internal.client.ClientUtilsImpl$CodeGenJob.run(ClientUtilsImpl.java:599)
     at weblogic.jsp.internal.client.Job.performJob(Job.java:83)
     at weblogic.jsp.internal.client.ThreadPool$WorkerThread.run(ThreadPool.java:217)
     at weblogic.servlet.jsp.JavelinxJSPStub.reportCompilationErrorIfNeccessary(JavelinxJSPStub.java:226)
     at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:162)
     at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
     at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
     at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:503)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
     at jsp_servlet._jsf._worklist.__worklist_jspx._jspx___tag27(__worklist_jspx.java:1265)
     at jsp_servlet._jsf._worklist.__worklist_jspx._jspx___tag26(__worklist_jspx.java:1232)
     at jsp_servlet._jsf._worklist.__worklist_jspx._jspx___tag14(__worklist_jspx.java:723)
     at jsp_servlet._jsf._worklist.__worklist_jspx._jspx___tag13(__worklist_jspx.java:673)
     at jsp_servlet._jsf._worklist.__worklist_jspx._jspService(__worklist_jspx.java:168)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at oracle.adfinternal.view.faces.config.rich.RecordRequestAttributesDuringDispatch.dispatch(RecordRequestAttributesDuringDispatch.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
     at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:469)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:800)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:294)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:214)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
   SUBSYSTEM : HTTP
   USERID : <WLS Kernel>
   SEVERITY : Error
   THREAD : [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'
   MSGID : BEA-101017
   MACHINE : vm0-jpawlows.amg.net.pl
   TXID :
   CONTEXTID : 2910bfe82460a9b3:63a8fc67:1328fe13615:-8000-00000000000022a6
   TIMESTAMP : 1316676096720
Diagnostic Dumps
Name: jvm.threads
Dump Files: jvm_threads13_i3.dmp
Name: dms.metrics
Dump Files: dms_metrics14_i3.dmp
Name: odl.quicktrace
Dump Files: odl_quicktrace15_i3.dmp
Name: odl.logs
Dump Arguments: ecid=2910bfe82460a9b3:63a8fc67:1328fe13615:-8000-00000000000022a6
Dump Files: odl_logs16_i3.dmp
Name: odl.logs
Dump Arguments: timestamp=1316676096814
Dump Files: odl_logs17_i3.dmp
Name: wls.image
Dump Files: diagnostic_image_soa_server1_2011_09_22_09_21_48.zipKuba

Hi Kuba
I guess you are getting this error in Linux Env and not Windows. Basically SOA/BPM opens lots of files (JARs and WARs) and I guess it do not close them properly. The root cause for your error is something else. Here is the fix. This should work.
Login into the linux machine with the root user privileges. Or ask the person who have root privileges to do this. Basically you have to increase the open file limits to much bigger number like 8192.
To change the open file limits, login as root and edit the /etc/security/limits.conf file. If the following lines are already there, just change the number to 8192. Otherwise add below 2 lines exactly. Means for all the users on this OS, the nofiles is set to 8192, instead of single user.
* hard nofile 8192
* soft nofile 8192
after this, make sure to RESTART the Linux box. Otherwise changes will not get reflected.
Login into unix box from any client and run this command and it should return 8192
ulimit -n
Then start the soa server and you should be all set. Let me know if this fixes your issue (I am hoping it should).
Thanks
Ravi Jegga

Problem with BPm Starting

Hy ,
I have a strange problem. I defined a BPM Objects, message (files) have been received correctly, but no instance of the BPM have been started. I simulated the same BPM with another old XI System and it works.
The error is an "Outbound Error" in the monitor (red flag).
Thank's a lot for help.
Matt

Hi,
Check the SXI_CACHE and see what i sthe return code for your BPM. It should be 0. If not then try activating it from there.
Regards
Suraj

Problem with BPM tutorial in WLI2.1

Similar Messages

Maybe you are looking for