Problem with BR ARCHIVE

Hi Gurus,
We are taking the BR Archive through the DB13 ,
The Process goes until :
WARNING: sort_backup_type not specified in .utl file
WARNING: default sort_backup_type to <size> for backup
Program: /usr/sap/PSU/SYS/exe/run/backint 6.0
Input File: /oracle/PSU/saparch/.adxzjpbm.lst
Profile: /oracle/PSU/920_64/dbs/initPSU.utl
Function: BACKUP
Backup Type: BACKUP_FILE
After this it hangs....
before All Archive will be taken in 2 to 3 hours. Now its already 13 hours its still in this position...
pls Kindly advice what to do

Hello,
That couldn't be the problem as the parameter you mentioned is optional.
sort_backup_type:
This parameter is optional and is used to specify four different backup
sort option. If sort_backup_type is not specified it will default to
the size option.
Check the media that you are using to backup your database, maybe there is some problem there.
Also check if the backint is running at the OS Level.
Regards,
Siddhesh

Similar Messages

Problem with create archive from mini-DV tape

I have a fairly large collection of homemade mini-DV tapes. They are getting a bit old and I would like to back them up to my computer as well as have easy access to the footage with FCP.
The tapes were made on a Sony TRV8 camcorder (either directly or as backups of older VHS tapes). I am using the same camcorder for playback.
The camera shows up as expected in FCP. My goal is to "Create Archive" on each tape. Here is where I ran into some problems.
My first tape ran about halfway through - around the 30 min mark and gave me a "end of tape" message. The footage was captured properly, but there is still half the tape to go. I tried a second time and only reached the 5 minute mark when the archiving ended with an "end of tape" message. I am on my third try as I type this and have made it to the 15 minute mark.
I thought to possibly create multiple archives, picking up where I left off. However, whenever I select "create archive" FCP insists on rewinding the tape to the start. This behavior differs from the Apple KB article which states archiving will start from the current position of the tape.
Adding to the problem is an issue of jittering playback.
When I playback using the camera controls of the "play" button in the import window, things are fine. When "Create Archive" handles the playback on its own, the pictures jumps as if it is on a trampoline. Sometimes I am able to hit "stop" and then "play" to get a normal playback - sometimes hitting stop stops the archive with an "end of tape" message.
Any ideas on what is going wrong or how to work around it? I have over 100 tapes to archive. If each tape requires numerous attempts to archive, this will never get done. I thought the archive process was supposed to import the entire tape?

The bit about archiving from the current tape position is from Apple:
"Final Cut Pro begins archiving from the current location on the tape."
From Final Cut Pro X: Create and manage camera archives
Last updated 9.16.14
Obviously, that is wrong.
The part about archiving ignoring timecode and just archiving the entire tape I have read in several online forum posts. Some I believe are in this forum. These same folks usually advise to use archive rather than import in a bad TC scenario. Again, it seems that wrong information.
I am now simply doing an "import" of a tape, which appears to be working as expected. Seems either the age of the tape and/or the playback device is causing less than perfect timecode. Lot's of stutters resulting in a single "scene" being imported as many separate clips. I understand what you mean by assembling when ready to edit, but this is not practical. It looks like some areas are broken down to clips of 1-2 seconds (some even less).
What a mess. I'm looking for a mini-DV player as I suspect my camcorder may be the culprit. Not easy to find one.
Seems I will have to assemble the multiple clips to recreate the original. I am hoping I can then output the assembled sequences to DV files to maintain the "original" quality of the import (which should be the same as the tape since it is all digital). I would then create some FCP libraries to organize and store the clips.
Was really hoping to simply do the camera archive thing. My tapes are all cataloged and organized. Having a number of archives which match each tape would have saved a lot of time and trouble.
--and thanks for the help. It's a bit frustrating trying to preserve old tapes, especially when things don't work how you expect. Any workarounds or ideas to get a library of raw files out of this mess is appreciated. IF I can get that far, I plan to back up to M-disc.

Problem with Camera Archive

I have set up a new external hard drive and it is recognized by Final Cut Pro X. I connected my Canon XL1, which is recognized, created a new Archive and started to import the input from the tape. However, a dropped frame occured after about 2 minutes , it stops recording(as expected). In my ignorance, I had seen the dropped frame stopping the tape, and just pressed the play button on the screen and the camera continued to play with the input signal being shown on the screen, for the rest of the 52 minutes on the tape. However, when I looked at the captured archive it had only recorded up to where it had stopped at the dropped frame.
I tried to create another archive starting from the tape position after the dropped frame (as the Help instructions says that you can do that) but FCPX insisted on rewinding my tape back to the beginning, so the same problem occured.
Can I overcome this problem, otherwise I cannot store all my raw footage from the camera tapes on to the external hard drive.?

Hello,
That couldn't be the problem as the parameter you mentioned is optional.
sort_backup_type:
This parameter is optional and is used to specify four different backup
sort option. If sort_backup_type is not specified it will default to
the size option.
Check the media that you are using to backup your database, maybe there is some problem there.
Also check if the backint is running at the OS Level.
Regards,
Siddhesh

Problem with imported archives

Hi all,
I have created Message mappings(this I have to delete once get the sucess),Interface mapping.I need to use XSLT mapping so I copied the Message mapping output to XSLT file Organization_2_PSTCS_Department_XSLT.xslt and when Imported into imported archieves.
When I try to use this mapping I am getting the message as in SUB .Alternatively if i use the message mapping I am getting sucess.
Please let me know what is the problem.
Thanks,
Srini

Hi,
>>>>>>I need to use XSLT mapping so I copied the Message mapping output to XSLT file Organization_2_PSTCS_Department_XSLT.xslt and when Imported into imported archieves.
you copied the output ? (you mean the result of message mapping?)
this has no sense as message mapping has nothing to do with
xslt mappings
you need to create your xslt mapping yourself and then import it
you cannot create xslt mapping from message mapping
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Problem with file archival. Please help

Hi Experts,
I have a requirement where XI reads input file via File adapter. Once the file is read successfully I need to archive it.
I also need to append timestamp to the archived file. After 10 days the archived file should be deleted.
How to achieve this in XI? Where do we specify the retention period for archived file? DO we have to write any script for teh same? IS there any sample script code available?
In file communication channel there is an option for archiving faulty files. Will this work for successfully processed files also?
Please help
Thanks & Regards
Gopal

Hi Gopal,
The option of archiving the file is available in Processing Mode:
http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
YOu can set the Processing mode to Archive to achieve your requirement.
retention period setting is not done in the communication channel.
Read more about archiving in this guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
Regards,
Ravi

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Problem with archiving print lists

Hi all,
we have an issue with asynchronous archive requests.
The archiving of some spool lists fails. Here the error message in OAM1:
Order History
12.03.2010 19:36:10     Request Created
12.03.2010 19:36:10     Asynchronous request started; awaiting confirmation
12.03.2010 19:36:10     Content Repository Reports Error
JobLog:
Job started
Step 001 started (program RSCMSCAJ, variant &0000000023175, user ID XXXXXX)
Error occurred during character conversion
SAP ArchiveLink (error in storage system)
Job cancelled after system exception ERROR_MESSAGE
It gets weird when I reprocess the request in OAM1, because then it works and we have no error message. It feels like when we start 50+ requests, some jobs fail. And if we start archiving of <10 requests everything works fine.
We tried archiving of 800+ spool lists in our QAS system with no problem. So we suspected, that our PRD content server may be broken or something. So we tried archiving spool lists from our SAP PRD system to our QAS content server -> same issue. The only thing left would be missconfiguration in our SAP PRD system but a few weeks ago everything worked fine and we had no issues.
Have somebody faced similar issues?
Regards
Davor

hi,
Sorry i have to answer with questions:
are you archiving spools larger then 2 gig?
can you send use the logs from the content server?
can you check OAM1 if there is more info ( check logging)
Rgds
Nico

Problem with Archiving

when playing around with my archiving option within Aperture, I messed up and saved the library which is almost 2gigs, twice on my Desktop, and library.
PROBLEM: the file is locked and unable to trash because its encrypted
What To Do? To get one of these useless files on my Macbook
Thanks
Drew

Same as you do with any locked file OS X, and there's no encryption involved at all.
Select the item in the Finder.
Hit Command-I to bring an info window.
Uncheck the 'Locked' tickbox.
Trash as needed.
Ian

I have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

i have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

I do not recommend reformatting your harddrive and reloading your software. This is a Windows thing. On an older mac it may be difficult to find all your software again.
Best to have greater than 2gig of free space. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(3)
Buy an external firewire harddrive.
For a PPC computer, I recommend a firewire drive.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
(4)
Buy a flash card.

Problems with JApplet, jar-Archive, packages and IE5

Hello!
I have a problem with a JApplet and Internet Explorer 5. I made a jar archive of my classes. The classes are
members of a package. The jar archive also contains images.
The structure of the archive:
com/mycomp/myapp/DemoApplication.class
com/mycomp/myapp/DemoApplet.class
<more classes>
com/mycomp/myapp/images/hp_logo.gif
com/mycomp/myapp/images/test.gif
<more images>
The archive is stored locally in a directory which contains also the html file.
I used the sdk 1.3.1 to compile the classes.
My problem: when I start the html file on NT with IE5, I get the error message below:
I try to create a label containing an icon with:
topLabel.setIcon(new javax.swing.ImageIcon(getClass().getResource("images"+fs+"hp_logo.gif")));It works on Sun with Netscape 4.67 and SDK 1.3.1 installed.
Should I move the images directory inside the jar archive to another place or is the html code not correct?
The error message:
java.lang.NullPointerException
     at javax.swing.ImageIcon.<init>(Unknown Source)
     at com.mycomp.myapp.DemoApplication.initComponents(DemoApplication.java:158)
     at com.mycomp.myapp.DemoApplication.<init>(DemoApplication.java:55)
     at com.mycomp.myapp.DemoApplet.<init>(DemoApplet.java:24)
     at java.lang.Class.newInstance0(Native Method)
     at java.lang.Class.newInstance(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)The html file:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
<html>
<head>
    <title>DemoApplet</title>
</head>
<body>
<BODY LINK="#0000ff" VLINK="#800080" BGCOLOR="#37a1a7">
      <h1>DemoApplet</h1>
      

<SCRIPT LANGUAGE="JavaScript"></SCRIPT>
<COMMENT><SCRIPT LANGUAGE="JavaScript1.1"></SCRIPT></COMMENT>
<SCRIPT LANGUAGE="JavaScript"></SCRIPT>
<APPLET CODE = com.mycomp.myapp.DemoApplet CODEBASE = "." ARCHIVE = "DemoApplet.jar,classes12.zip" WIDTH = 695 HEIGHT = 525></XMP>
<PARAM NAME = CODE VALUE = com.mycomp.myapp.DemoApplet >
<PARAM NAME = CODEBASE VALUE = "." >
<PARAM NAME = ARCHIVE VALUE = "DemoApplet.jar,classes12.zip" >
<PARAM NAME="type" VALUE="application/x-java-applet;jpi-version=1.3.1">
<PARAM NAME="scriptable" VALUE="false">
</APPLET>
</NOEMBED></EMBED></OBJECT>


</body>
</html>Thank you for your help!
Gruesse,
Torsten

seems like it couldn't find the image file... try to give it the absolute path to the file first to see if this is the root of the problem... and then try to find alternative ways to not give it the absolute path...

BC Archive - problem with opening view object based on entity from archive

We have encountered a weird problem with a reusable BC library on different PCs.
Library was imported into a project following steps in section 25.7 of the ADF guide.
A view object was created using some of the entities from the library.
Model tested successfully with view object (using AppModule tester).
Page developed with no problems.
Application copied to a different PC.
BC JAR files set up in lib folder and removed/readded to application model project. When attempting to open view object, get the error below.
However, the View object still tests successfully using the AppModule tester.
The page using the View object still runs successfully.
I believe the problem is that when the archive was originally imported, it was imported from a different location. The Containees tag in the project .jpx file references that path name. But even when I edited the path name, I still could not open the view object. Do we have to remove and redo the import of the library each time the application is copied to a different machine?
Error when attempting to edit View Object:
oracle.jbo.dt.objects.JboException: The following object(s) referred to objects that could not be found:
com.guideworkstv.ibo.webstagemodel.AcctReqForReviewViewObj
com.guideworkstv.ibo.webstagemodel.AcctReqForReviewViewObj
Could not find the following referenced object(s):
com.guideworkstv.ibo.model.webstage.entities.IboAccountRequest
com.guideworkstv.ibo.model.webstage.entities.IboAccountRequest
     at oracle.jbo.dt.objects.JboException.throwException(JboException.java:81)
     at oracle.jbo.dt.objects.JboPackage.loadResolveReferencesXML(JboPackage.java:1397)
     at oracle.jbo.dt.objects.JboPackage.finishObjectsLoad(JboPackage.java:1042)
     at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:972)
     at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:951)
     at oracle.jbo.dt.objects.JboBaseObject.loadFromXMLFile(JboBaseObject.java:2615)
     at oracle.jbo.dt.objects.JboPackage.loadFromXMLFile(JboPackage.java:880)
     at oracle.jbo.dt.objects.JboPackage.checkForLoad(JboPackage.java:451)
     at oracle.jbo.dt.objects.JboPackage.findContainedObjectByName(JboPackage.java:440)
     at oracle.jbo.dt.objects.JboPackage.findObjectByName(JboPackage.java:1999)
     at oracle.jbo.dt.objects.JboApplication.findObjectByName(JboApplication.java:959)
     at oracle.jbo.dt.objects.JboUtil.fileURLToObject(JboUtil.java:510)
     at oracle.jbo.dt.jdevx.ui.JdxJboAddin$1.handleCopy(JdxJboAddin.java:997)
     at oracle.jdeveloper.compiler.CopyTranslator.handledByListeners(CopyTranslator.java:125)
     at oracle.jdeveloper.compiler.CopyTranslator.translate(CopyTranslator.java:263)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildGraph(UnifiedBuildSystem.java:300)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProjectFiles(UnifiedBuildSystem.java:516)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProject(UnifiedBuildSystem.java:609)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildAll(UnifiedBuildSystem.java:666)
     at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.run(UnifiedBuildSystem.java:894)

We have resolved this problem by making sure that all machines have identical paths for both the working and the lib directories. It would be nice not to have to do this though.

Problem with Archive and Install - Second disc won't complete

I'm trying to run an archive and install for my iMac, OS 10.4.11. I get through the first disc fine, but after I put in the 2nd install disc, it gets all the way to the "finishing installation" and then won't move past "running GarageBand Demo Songs Installer Script". it says less than a minute remaining, and the downloading bar is swirling, but there is nothing happening and it hangs here for hours. I've tried reinstalling, but it will only ask me to load the 2nd disk again, and the same thing happens over and over. I even tried a different install disc 2, and the same thing happened. Is there a way to push past this, or start the entire archive and install again? when i reboot to the disc drive with the 1st install disk, it ask me to put in the 2nd disc.
This all started because iTunes was acting up after I got an ipod touch, no prior problems with the computer. Can anyone help?

I've seen this reported before. What some have had some success with is to do a custom install so the second disk is not needed. See BDAqua's tip to someone with the same issue in the Tiger forum.
http://discussions.apple.com/message.jspa?messageID=9959537#9959537

Problems with Creative Cloud storage (again!)

I am having problems when uploading files to Creative Cloud storage. Some of the files go - some don't, and are flagged 'Unable to Sync'. I have had this problem for some time and have stopped using CC sync, but I thought I would give it another go the other day, and still no luck. The files that are reported as being a problem seem fine - no issue with the names, or anything that I can see.
I spent almost an hour on the phone to technical support about this issue about a week ago and the guys I was speaking to (I kept being pushed on to someone else) didn't seem to have any idea. They just kept going through all my security questions and then put me on hold whilst they asked someone more knowledgeable. They would then come back on and pass me to someone else (more security questions) until eventually the last guy I spoke to said he didn't know the answer and an Adobe representative would contact me in 24 to 48 hours. Not a very impressive turn around for customer support - even less so since it is now a week later and still no call. Let's face it. I'm not going to get a response from Adobe.
As a test, I tried uploading the same files to DropBox. Not very technical perhaps, but I just reasoned that if there were problems with one system, they should show up on the other. Imagine. They uploaded to DropBox no problem.
So the technical fix is forget Creative Cloud storage and use DropBox. Okay, you have to pay for a reasonable amount of storage, but if you depend on your files for your business, it's worth it.
I'm worried though. I'm a big fan of Adobe, and have been using their products for years but am getting concerned that, should I have any problem with any of their CC products their support will be minimal (if I'm lucky) or non-existant (as seems more likely).
As a little extra comment, I have emptied out my CC Storage files (and the archived files) and yet the CC system still says I have 528MB stored - although there is nothing there. I had this once before and the Adobe technical guy reset the system - but it's back!
HOLD THE FRONT PAGE! I just opened my CC storage in a browser and tried to drag and drop the troublesome files directly. And it worked! So maybe the problem is with the CC app. (I have tried uninstalling and re-installing it numerous times). So dragging and dropping is a fix, but not very practical since you cannot drag and drop folders, so you have to create all the folders in the browser version and then drag the files as required.
Anyone got any ideas?
iMac with OS X 10.9, 3.4 GHz Intel Core i7, 16GB RAM

Woah - Ok so sometimes it's the simplest answer we overlook -- HOW TO MOVE YOUR FILES FROM COMPUTER TO ADOBE CLOUD -- EASILY
(for windows users)
1 - Start menu
2 - Go to Computer - OS ( C:) - Users - "Your Name"
3 - You should see here - the folders you need - Creative Cloud Files - and also - My Docs, My Pics, etc -- The app will not allow this task - windows will
4 - Right click on the source folder - (Pics, docs)
5 - Select copy
6 - Right click on Creative Cloud Files
7 - Select Paste
This will transfer all files in that library to the Adobe Cloud folder and allow them to be synced to the cloud
Hopefully this will save some folks the Head - desks it caused me.

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Problem with BR ARCHIVE

Similar Messages

Maybe you are looking for