Problem with Briefing Books and iBots

I have a question about the usage of Briefing Books and iBots:
In my Briefing Book there are different analysis, some with tables and others with charts and graphs.
The problem is, when I send this Briefing Book to my email by iBot, then the file attached to the email does not contain the charts anymore. There are just the tables left. When I watch the same Briefing Book directly in Answers, everything is displayed all right.
Does anyone know, why this happens.

Hi there
If the page is not actually inside of a Book, the WebHelp generation process will sense that.
If you want a Book, try right-clicking the page in the TOC editor and choose "Create Book from Page". This should create a book with the page inside it. Of course both will have the same name, so you may need to rename the Book. Or rename the page. Your choice.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

Problem with Address Book and Exchange

Hello,
I have a little problem with Address Book and Microsoft Exchange 2003. I am able to connect to Outlook Web Access via Safari without problem. I see my contacts. Unfortunately when I setup everything needed in Address Book preferences (Synchronize with Exchange) the contacts didn't show in my Address Book. Strange thing is that no error is generated. can someone please help me what I am doing wrong ? Thanks in advance.

My suggestion is that you consider using Microsoft Entourage. For Exchange users on a Mac, Entourage is by far the best option. The down side is, you need to buy Microsoft Office 2004 to get Entourage, but your employer might own a site license, in which case, Office 2004 might not cost you anything.

Disabling iCloud, problems with Address Book and iCal.

Ok, I made the mistake of turning on iCloud before knowing much about it or really needing it. I just have a MBP and no other devices. So, I now have iCal and Address Book connected to iCloud. I've tried to disable it but have not had success. I export my data files for both and when I import the data back... the iCloud part comes with it. What is so strange is that I can add events to iCal and iCal works without a glitch. But, I can't make ANY changes to my Address Book. It doesn't save any and Address Book just crawls along at a snails pace as if it is broken. I believe this all started because I activated iCloud. I'm NOT syncing it to any other device so I don't need it.
Are these problems because of iCloud or because I exported/imported onto a new install? I'm using a different user name on my same computer... but the iCloud account has no changes.
I'm just confused as to what to do. My Address Book goes so slow and I can't edit it. I don't need iCloud, etc. I try to turn it all off and that solves nothing. I try to export / import my data file to my desktop and back after turning iCloud off and this solves nothing. iCloud just comes back with that data. What should probably be a simple task I can't solve.

Please let me know if this works for you guys, it was a lifesaver for me!

Problem with iPhoto Book and pictures

Hello,
When i create a photo book with iphoto, i havent got my photo in the real size. iphoto crop my photos.
Other thing : is it possible to insert a 16/9 photo ? Choose the size of the picture : like square, panoramic ... ????
Thanks for your help.

You cannot change the actual sizes of the frames in the books. You can make some adjustments to the way your photo is displayed by double-clicking on it. You can resize the photo and move the photo within the frame, but that is about all you can do.
For information about the iPhoto books, check out this website: http://www.lizcastro.com/iphotobookthemes/
I hope this helps.

New airport: can't get my macbook or my imac to join my wireless automatically, my other stuff still joins without problems but i have to join manually with the book and the imac ?? I've tried all the settings and every thing else I can think of.....

new airport: can't get my macbook or my imac to join my wireless automatically, my other stuff still joins without problems but i have to join manually with the book and the imac ?? I've tried all the settings and every thing else I can think of.....
Running on Lion, never had a problem before until the old airport died and I replaced it.

try connecting the device in _*recovery mode*_, then restore from your backup.
also, make sure [_*Apple Mobile Device Service*_|http://support.apple.com/kb/TS1567] is installed and started.
JGG

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718

Cache Seeding using Briefing Books in iBots

Hi All,
I'm trying to seed the cache using Briefing books in iBots.
1. Created the Briefing book of a Dashboard page with required dashboard prompt values
2. Selected this 'Briefing Book' as Delivery Content
3. Scheduled the iBot
But, despite of iBot running successfully, Cache is not being seeded.
Am i missing any steps?
Moreover, in 'Destinations', if i just check 'Interactive Dashboards' & 'Active Delivery Profile',
No cache entries created
But if i check 'e-mail' or any of the devices,
then a cache entry is generated for the default dashboard prompt values* but not for the prompt values selected for the Briefing Book*..
Please help
Thank you,
Raghu

Hello Madan,
Thank you for the reply..
"Oracle BI Server Cache" can only be used for the answer pages/dashboard pages with default prompt values..
Any other way to get the Cache seeded for other prompt values too..
other than the manual seeding
Thank you,
Raghu

I bought my iphone unlocked from carephone warehouse, I had a problem with the phone and apple swapped it over but they locked it to tmobile!!! what can i do?? I have changed contracts and can not use my phone!

I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?

In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets.

Boot Camp problems with Windows 7, and a new Macbook Pro

When I try to install Windows 7, when the process is almost complete and Windows is finalizing all settings, the system reboots then gets stuck at the white/gray bootscreen, and then tries to boot from disk, only to repeat the bootscreen cycle indefinitely. How do I fix this? Thank you very much.

My MAC BOOK is 13 inch, first generation of unibody that I bought when it first came out last November, 2009. It seems that the latest boot camp 3.1 does not support windows7 64 bits on my mac book model. I followed Apple instruction to upgrade boot camp 3.0 when running XP 32 bits. And I then upgrade my XP 32 bits to 64 bit Windows 7. The upgrade/installation was successful but I encountered a lot of problems with the mouse and sound.
1. No sound with my new Windows 7 64 bits.
2. I managed to make Windows 7 64 bit recognize my apple mighty mouse. But the mouse does not funtion normal as expected. It does not work with swiping and scrolling.
3. I could not re-install boot camp 3.0 from windows.old nor from the Mac OS X installation disk. When I tried to run setup.exe from the MAC OS X snow leopard, I got the error "Boot camp x64 is unsupported for this model"
I am really disappointed that boot camp 3.1 is not universally supported for all mac book or mac book pro.
I need help to re-install boot camp for my Windows 7? I bought the upgrade through education upgrade program and I selected to get 64 bit version so I do not want to rollback the installation to 32 bit.
Please help.

3 Problems with Address Book-- now considering Bento

I have 3 problems with Apple Address Book that make it close to unusable for me, so I'm considering buying Bento 3:
1. *Can't un-do accidentally deleted text*- When you click in the "Notes" section, it will select all the text there by default (instead of merely inserting the cursor). If you are not paying attention, and hit any other key when it is selected, it deletes everything in there. UN-DO will not un-do this. I've verified and reported this issue to Apple, but it has still never been fixed or formally addressed (aside from many complaints in the Apple forums).
2. *Search doesn't always work*- Yesterday I searched for one of my entries, Harbor Freight, by typing in the search "harbor". Nothing came up. I thought that maybe I never actually added this business and started with a new one. After I created the new one, I noticed that now, along with the new entry, the old contact suddenly showed up in the left column.
3. *Cards disappear*- Many complaints on the web about this. I do not do any syncing with MobileMe or any device. Occasionally, cards just seem to vanish. Sometimes the card is actually still there, but changes in the Notes field or other fields I made on a previous day were evidently not saved and gone. Very frustrating.
Here's my concern with using Filemaker Pro's Bento: if it's using and accessing the same database as Address Book, all these problems might end up also existing in Bento. I use Address Book for business and personal and heavily rely on the Notes section. I can't keep wasting my time with this.
I don't mind paying the $50 for Bento if it resolves these issues, but the shared database worries me. I guess that I could create an independent Bento database that is completely separate from Address Book, but then I don't know how well it would integrate with Apple Mail.
Any thoughts?
Thanks,
Dave

DON'T DO IT. DO NOT INSTALL BENTO. I bought & installed it on 01/20/10 and it destroyed my address book. Gone forever. If you are having problems with Address Book now, wait until you see the damage created by Bento! Bento does not replace Address Book. It is a 'supplement' (at best) and uses and updates every file in your Address Book without you even knowing it! Well, you notice it when your database is destroyed and you find all of your contacts under 'No Name'. I am so serious. Bento is just a shell. None of your addresses are actually stored in Bento. They remain in Address Book. Every time you open Bento, it accesses your address book database, and starts re-formatting and re-working every entry along with any 'changes' you make. And who do you call for help? Apple says 'not our program'. Filemaker says 'we don't know anything about Mac's'.....I lost four years of addresses for all of my customers. Gone. In seconds! Just don't do it. Don't install Bento. And be sure to remove any 'smart groups' you have created as it seems to be at the root of most problems one encounters with address book.

Problems with games server and client

Hi! I am making an MMORPG game and I have problems with the server and client connection.
I can connect to the server, but when a second player does, the server console tells me this:
java.net.SocketException: Connection reset
After that, all clients disconnect.
Which is the problem?
How can I solve it?
Thank you so much

Here is how my sever work. I took some of this code from a book called Killer Programming Games in Java. If you google for it, you will find it for sure.
TourGroup tg = new TourGroup(); // this object stores information about all clients connected to the server
    try {
      ServerSocket serverSock = new ServerSocket(PORT);
      Socket clientSock;
      while (true) {
        System.out.println("Waiting for a client...");
        clientSock = serverSock.accept();
        new TourServerHandler(clientSock, tg).start(); // this is the thread that monitors each client
    catch(Exception e)
    { System.out.println(e); }
} This is some code of TourServerHandler
public TourServerHandler(Socket s, TourGroup tg)
    this.tg = tg;
    clientSock = s;
    name= "?";
    cliAddr = clientSock.getInetAddress().getHostAddress();
    port = clientSock.getPort();
    System.out.println("Client connection from (" +
                 cliAddr + ", " + port + ")");
public void run()
// process messages from the client
    try {
      // Get I/O streams from the socket
      BufferedReader in = new BufferedReader(
   new InputStreamReader( clientSock.getInputStream() ) );
      PrintWriter out =
new PrintWriter( clientSock.getOutputStream(), true );
// and here goes the rest... The TourServerHandler thread uses this code to send messages:
tg.broadcast(msg); tg.broadcast works like this:
synchronized public void broadcast(String cliAddr, int port, String msg)
// broadcast to everyone but original msg sender
    TouristInfo c; // this object stores info about the client
    for(int i=0; i < tourPeople.size(); i++) {
      c = (TouristInfo) tourPeople.get(i);
        c.sendMessage(msg);
} This is the error part
public void sendMessage(String msg)
PrintWriter out;
    out.println(msg);
      System.out.println("OK");
} I can't find any error but I still get that Connection reset exception...

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problem with Briefing Books and iBots

Similar Messages

Maybe you are looking for