Problem with broken libcurl after attempt to upgrade

Hello,
libculr fails to upgrade with an error message - pacman: error while loading shared libraries: /usr/lib/libcurl.so.4: invalid ELF header
After that my system is hal broken - starting up, but some applications refuse to run.
What i have to do to fix that?
Thanks for help
Last edited by neycho (2012-10-16 15:52:33)

Hi, did you read this corner of the wiki? near the end!

Similar Messages

Serious problem with X1 carbon after windows 8 upgrade

Hello,
I've just purchased my new X1 carbon this week, came with 3 discs to upgrade it from Windows 7 to 8. Now I've followed the steps and everything worked fine. But, my laptop lags A LOT. For example, while I am using on it, the "writing/reading to SSD" lamp lights up and my laptop hangs up for seconds then it's back. It keeps doing this multiple and multiple of times!!!
Any help please!

Victorymarketin, welcome to the forum.
Since they are both Microsoft programs, I suggest contacting MS Customer Service for help. They have always gotten me up and running in short order. This is always my solution when I have MS related problems. They if anyone can, will solve your problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

My apple ID was the original without the email extension. It caused problems with ITunes conversion after the last upgrade. Tech fixed that issue but my MacBook defaults to the old ID. Even though I have a new ID it defaults to the old. iTunes is ok.

How do I change my Apple ID, when it defaults to an old ID and ITunes is accepting another ID? The IDis very old and does not contain an email extension. I had a problem because of that earlier this year in my ITunes account and Apple fixed it.

Get in touch with Apple again -> http://www.apple.com/support/appleid/.
Good luck,
Clinton

HT201263 Help please! Problems with iPhone 4 after iOS 6 upgrade

Tried to upgrade iPhone. Got a message saying settings were lost, connect to iTunes. I did this and it said I had to restore. I did this and it said unable to restore due to unknown reason. Now phone keeps trying to upgrade and then restarts. iTunes doesn't recognise my phone.
I have tried all troubleshooting tips and nine work!
Please help!!

same here..it doesnt work for me too!!
exactly same issue. Apple got something wrong with iOS 6

Printing problems with Epson printer after snow leopard upgrade? I can print but text does not come out properly

I have upgraded my macbook to snow leopard and have spent ages downloading updated drivers etc. but still can't print properly to my Epson SX515W printer. I am losing half the text on each line and nearly all of the first few lines. Anybody experienced this and found a fix ?

I have upgraded my macbook to snow leopard and have spent ages downloading updated drivers etc. but still can't print properly to my Epson SX515W printer. I am losing half the text on each line and nearly all of the first few lines. Anybody experienced this and found a fix ?

Problems with iPhone detection after Snow Leopard upgrade

Hi all,
Have been experiencing a rather strange issue ever since I had upgraded from Leopard 10.5.7 to Snow Leopard via the upgrade disc. My Macbook ceases to detect my connected iPhone in both iTunes and the XCode Organiser. I have to re-install iTunes each time the Macbook is loaded up for the detection issues to be fixed.
Some of my friends who had upgraded from Leopard (rather than doing a clean install) had also experienced similar issues. Wonder if there is a fix to this?
Thanks in advance.

You might need to remove and reinstall the Apple Mobile Device Service. Check out this article:
http://support.apple.com/kb/HT1747

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Problem with the workbook after upgrade

Hi all,
We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
1. What could be the possible reason behind this?
2. What exactly got changed in the system which reflected this problems?
3. What other problems might have occurred which we may not have noticed?
4. How can I find out the number of workbooks affected due to this?

Dear ,
This is known issue:
Please implement the below mentioned note as this will solve your issue,
Note 1609237 : Subsequent correction to 1567679
Regards,
Arvind

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

Hi,
We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
Thanx
deepak

What kind of problems?
I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
This is your best bet.
If you still have problems, contact NI and ni.com/ask and start a support inquiry.

Has anyone been unable to restore their iPad after attempting to upgrade to ios5? error 1

Has anyone been unable to restore their iPad after attempting to upgrade to ios5? I get an unknown error 1 message. Thanks.

I have the same problem. Something happened during the download and froze iTunes. After spending three days searching these forums with the dead iPad, the only thing I got to work was to try downloading iOS 5 using my sons computer. This worked. However I cannot now get my computer's iTunes to sync with my iPad.. It contains the same error message (1602) and has the same problem as before. It is not an antivirus problem. I need some help too

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

Problems with ITMS Videos after 1.1 Update

OK, so there are lots of posts about video problems on 5G ipods after software update 1.1 and what encoding methods were used etc etc.
After updating my 60GB iPod to 1.1 all my videos, including those purchased from the iTunes Music Store, suffer from audio problems.
The video playback is fine, no freezing like others have mentioned, but I get loud popping and clicking sounds on the audio, particulalry at the start of a clip.
Has ayone else experienced problems with video sound after the 1.1 update?
Restoring to software 1.0 resolved the problem so there is definitely a problem with 1.1 and ITMS content.
Apple need to sort this out. Fast.

I foolishly did the 1.1 upgrade to my 60G iPod. I found that, as we all know by now, that all ov my videos that weren't from Quicktime Pro or purchased through iTunes hang after about 30 seconds, and then continues without any audio. But, the really obnoxious part is that my videos that I converted via QuickTime Pro suffered from very strange audio artifacts. These would fall into the category of clicks, purrs, warbles and other strange noises in addition to the audio that is supposed to be there. That pushed me over the line, and I "downgraded" my iPod back to release 1.0. I did the "restore" to completely erase my iPod and then re-loaded it from iTunes. I had already upgraded iTunes, and it has no problems with my now-restored-to-version 1.0 iPod. By the way, you have to edit a system file in order to do the downgrade: Put the ipod in harddisk mode. Edit the file (hidden folder and file) \iPod_Control\Device\SysInfo Replace the line that have the word "buildID" with this line:
buildID: 0x05908000 (6.0)
Then run the original iPod Updater to put 1.0 back onto it. This will leave you with the "feature" that any video that you change the Video Kind to TV Show will not show up on your iPod unless it's in a Video Play List. I actually like this, as it keeps the Video list from being cluttered up.
Sony Vaio PCG-U1 Windows XP Pro

Problem with broken libcurl after attempt to upgrade

Similar Messages

Maybe you are looking for