Problem with BSO - ASO partitions (Essbase 9.3.1)

Hi there,
Is it possible to create a BSO partition on top of four ASO cubes when using member set functions in the partition definition (e.g. @GENMBRS or @LEVMBRS)?
I have tried that but always get an “overlapping partitions” error, although the partition members are not defined overlapped. The cellcount does match.
Appreciate any hints.
Thanks in advance.

Obviously this won't resolve your entire problem, but just to answer the first question you can definitely use e.g. @GENMBRS successfully in the partition definitions for a single BSO cube over multiple ASO cubes in 9.3.1.

Similar Messages

  • Problem with loading data to Essbase

    Hi All,
    I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
    But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

    Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
    [2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
    [2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
    [2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
    [2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
    [2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
    [2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
    [2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
    [2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
    [2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
    [2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
    [2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

  • Problems with Excel 2007 and Essbase 6.5

    Hi,
    Two quick questions:
    1. We are planning to upgrade our office to 2007, XP professional SP2 but still going to use Essbase excel add-in 6.5 for some users and Essbase 7.3 add-in for others. Has anyone faced any problems with this combination?
    2. The only problem I encountered so far was when I double click a member name for retrieval, the pointer (cursor/icon) flickers / flashes continuously. But when I take the pointer out of the excel spreadsheet, the flicker goes away. Does anyone know a fix to this. Thanks.

    Hi,
    I'm admin of an hyperion essbase database.
    I'm testing our addin 6.5.1 with excel 2007.
    First problem evocated on retrieve is confirmed.
    I continue my test and tell you if i find another problem.
    What i would say is that old version can be unsupported but i'm sure we can use this addin on excel 2007, i hope.
    Regards.
    Edited by: user9947793 on 4 sept. 2009 08:56

  • Problem with machine rebooting. Essbase 11.1.1 installation.

    Hi all,
    I have a problem with my Essbase 11.1.1 installation. In a nutshell when I reboot the machine I can't log in EAS anymore. The only way I found out is just reconfigur EPM system after rebooting but It's just a work around.
    Thanks for helping

    Hi user,
    AsI read between lines, it seems that you previously were able to access EAS so your installlation is not the problem but you accessing to EAS isthe problem. As you mentioned you are having problems accessing it after rebooting the server, I think it could be a prolem with the services. Please try stopping all the services in this order:
    administration servicese
    Essbase services 11.1.1.1_Hypservice_1
    Foundation
    Openldap
    and then restart them from bottom to top. Let me know.
    J.

  • Problems with loans and partition in Organizational Assignment

    Hi,
        I have a problem with loans(infotype 45) when exist a partition in Organizational Assignment infotype.How can we do to calculate the proportional wage types generated with P0045 (/LBD,/LRP,etc) in each partition?
    Thank you very much!!

    Technical wage types of loan do not split as the wage types of Basic Pay Infotype. Can you please provide me information regarding what issue you are facing in this. Do you want your Loan Installment to be reduced as per your organizational assignment?

  • [SOLVED] Dualboot problems with Windows 7 partition

    Hello,
    after arch is running well I focus on the dual boot to have my arch and the windows 7 available.
    The first partition (hd0 1) is the chainboot to Windows 7, the second one is the main partition for windows and the third held the syslinux bootloader.
    LABEL windows
    MENU LABEL Windows
    COM32 chain.c32
    APPEND hd0 1
    After I uncomment the lines in the syslinux.cfg with the "Windows2-Label, I just tried what happens, because I was expecting everything works well like the other laptop I installed both systems.
    The following error message shows up when I select Windows in the boot menu: "Couldn't read first partition sector"
    At first I set the MBR back to the W7 chainloader to check if it is broken, but it works, after that I set it back to the syslinux bootloader.
    I also tried some workarounds:
        - KERNEL instead of COM32
        - setting APPEND to disk identifier of the windows chainloader
        - try to open the cfdisk, this shows up an error: "cfdisk fatal error bad logical partition 6 enlarged logical partitions overlap"
    Confused and unhappy I checked it with gparted and saw there is now error.
    #May anybody can hep to handle this problem or has some experience with that type of error. I was searching the web for two days but didn't found anything that helps.
    Kind regards
    mutagen
    Last edited by mutagen (2013-12-17 09:52:20)

    The awnser is just easy as I thought. It is a problem with the extended logical partition, creted by windows partition programm. The partitiontable is somewhat messy. But i can't delete it without loosing much of my stuff and even can't back it up. So i decided to buy a mSATA SSD for the my laptop.
    Now it works. :-)

  • Problems with extract metadata from Essbase with ODI 10.1.3.5.

    Hello there, I have a really annoying problem. I have 2 dimensions in essbase v11 with a space on it, (Itens Financeiros and Centros Financeiros), and this is causing a problem when I try to extract the metadata from essbace to a table. the problem occurs some times in 3 - loading - ss_0 - begin essbase metadata extract and some times in 4 - loading ss_0 - extract metadata, but in this 2 steps the error is the same:
    unknown member name [itens] in function [@idescendants]. I see in Johns blog someone sayng to add a '/"' in the front and at the end of the member filter criteria to allow ODI to parse the space as part of the member name. but I really don't understand this. Someone can helpme with this? Thanck you.

    It doesn't matter, I am able to replicate with an older version of the essbase adaptor...
    I take it this is the type of error you are receiving "com.hyperion.odi.essbase.ODIEssbaseException: Extract operation failed : Cannot query members by specs. Analytic Server Error(1200497): Error parsing formula for [REGION DEFINITION"
    If you download patch - Patch 8785893: ORACLE DATA INTEGRATOR 10.1.3.5.2_02 ONE-OFF PATCH
    It is easy to install just a matter of copying a jar file over an existing one in the \oracledi\drivers directory.
    It should resolve the issue.
    Ok?
    Cheers
    John
    http://john-goodwin.blogspot.com/                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Problem with Rescue & Recovery partition

    Hi,
    I have a problem wit my Lenovo 3000 V200.
    The hard drive had bad sector on the end of C partition.
    So, I bought a new hard drive.
    I connecter it as an  external drive.
    With a utility of copy partition, I copied the partition ServiceV002 from the old disk to the news disk.
    I can't copy the partition C: because there are bad sector.
    After, I connected the new hard drive into the laptop.
    I try to boot and use Recovery System, but It doesn't work.
    I have no DVD of backu, So can I do to use the partition ServiceV002 to restor my computer as a new computer
    In advance, Thanks for your help

    First you should try to fix the bad sectors, you can use the following command:
    chkdsk c: /f /r

  • Problems with Dashboard (after partitioning the hard drive?)

    I have a MacBook Pro with Snow Leopard. Yesterday I partitioned the drive to also run Windows, using Boot Camp. Everything worked fine after I completed Boot Camp.
    Now my Dashboard is not working correctly. It opens and closes, and certain widgets work, but others are non-responsive. Some won't even let me close them. I opened the "Manage Widgets" widget, and that is blank and also will not close.
    I also installed all new software updates yesterday, but those are the only changes that I have made.
    Any ideas?
    Thanks!

    Satellite A665-S5170 Specifications
    Satellite A665-S5170 Support Page
    Hunter
    First, in general, you should only be using the hardware drivers from your model's Toshiba support page. As well, you should not allow Windows Update to change any of your Toshiba supplied hardware drivers.
    After doing a clean install, the order that the drivers are installed in is critical for success. This is 1st chipset, 2nd display, then all other drivers. But, on a Toshiba, after installing all the hardware drivers, you are going to have to install some of the Toshiba utilities for it to work properly. Again, the order is critical, this would be 1st TVAP (Toshiba Value Added Package), 2nd Toshiba Flash Card Support Utility, then all other Toshiba Utilities.
    However, like everything, there can be other factors and complications. For example, on your system you could have either an nVidia or Realtek sound card. In this case, you can try each driver and see which installs and works.
    But, I would strongly recommend that you breakdown and order the set of Toshiba recovery media for your system, which you can do here. You will just need to input the serial number from the Toshiba label on the bottom of your unit. This will rebuild your Toshiba HDD recovery partition, reinstall Windows 7 with an imbedded product key, and install all the drivers, utilities and software your system came with, as listed in your specifications.
    Let us know what happens. Good luck.
    Mike

  • Problems with Disk Utility - Partition of my HD cannot be repaired.

    Sorry, I rarely post here and not sure if I am posting in the right forum.
    I have an issue with using the disk utility on my Mac OS X 10.4.1
    I am trying to recover a partition on my hardrive.
    Image here (on the right):
    http://img118.imageshack.us/my.php?image=picture1ztl.png
    I don't know how to recover HD2_Personal. I can't verify or repair it. Any recovery software avaliable?
    Thanks for your attention.
    Message was edited by: jbnk-w

    Ya, but you are talking about some systems files, I think.
    Actually I am talking about any file. I'd hate to discover too late that that I'd copied over a corrupt data file, erased my drive, and had ruined my chances of perhaps repairing it and getting a good copy.
    If he/she can backup needed files, reformat, install new system, update, and then copy needed files back. This to me, takes less time, and you got a nice clean new system.
    Yes, you have a new system, but if DW works it will take a lot less time than what you're talking about doing, especially since you have to be at the computer doing it all! Install new system, then all the updates, then all the software again, with all their updates, then put all the preference files, etc. back?
    I have DW, and I bought it in hopes to recover one file, waste of money, think its version 4 dot something
    I don't know the versions offhand. Make sure it is the correct version for your OS.
    gladly give it away.
    I'd take you up on that!

  • Problem with Macintos HD partition.

    TL;DR so basically, my problem is that my Macintosh HD partition (OS X) is somehow blocked and I can't format it, I can't boot into it, I can't write files into it and I can't even mount it back. Good thing is atleast I could make a copy of my files to an external drive from a Windows 7 partition I had installed before this problem happened and I can actually boot into this Windows 7 Partition but not the OS X one.
    I'll make this as detailed and informative as possible, I'm pretty desperate now and I just want to solve this.
    A few weeks ago I got Windows 7 as a partition on my Mid-2012 Macbook Pro 13" (the last non-retina model), I got the base model, which as a core i5 cpu, 4GB of ram (upgraded to 8GB recently), Intel Graphics 4000 etcetera, model no. is A1278 I believe.
    Okay, so the reason I installed Windows 7 in a bootcamp fashion is because I have to run Revit/Lumion and other various software that aren't available on OS X, for I study architecture and I require them, I tried using Parallels but I just did find the bootcamp experience a little more pleasant and natural. Naturally, whenever I wanted to use those programs, I had to restart my notebook and boot into windows, and I didn't find this extenuating or unpleasant, but then, a few days ago, after doing what I wanted to do on the windows partition, I tried to go back to OS X, selecting the option "Restart in OS X" from the Bootcamp Assistant in windows. After that, my sytem restarted and just went normaly into the apple loading screen before OS X boots completely, but, this time, a loading bar appeared under the apple and just started loading for... well, a little more than 10 minutes, then, when it finished, I got a message saying that OS X couldn't be accessed or couldn't load, something like that, and I still get it, so I've been using windows since then, because funny enough, my windows partition DOES work, but my OS X partition doesn't.
    So I've read a few threads on different forums and trying everything, but the thing that gave me more info about my problem was when I booted into recovery mode and saw that my Macintosh HD partition was "unmounted", naturally I thought "so THAT was it!!!" and tried to mount it, but it didn't, it told me to verify the drive and try again, so I did, and the Disk Utility in recovery mode found that my drive (only Macintosh HD partition) needed to be repaired, so again I tried to do it and clicked on Repair right there in the Disk Utility, but then again I couldn't repair it and it told me to make a copy of all my files and make a clean install of mavericks again (this happened a few weeks ago when yosemite wasn't out), so I told myself "meh, I can still copy-paste the files from my windows partition into an external drive and just format the Macintosh HD partition and re-install Mavericks. I did that, and then went back to disk utility on recovery mode, and when I tried to re-install mavericks on that drive, when I tried to choose the Macintosh HD partition it told me that "This drive is blocked".
    I don't know how in the world could I block my own OS X partition but I hope someone can help me, please, this is driving me crazy. Thanks in advance guys.

    First you should try to fix the bad sectors, you can use the following command:
    chkdsk c: /f /r

  • Problema with my mac partition on boot camp that reach space limit

    How I can delete file from my mac partition that doesn't allow me to open it?

    The Windows side has a red-only HFS+ driver. You cannot delete files on the OS X  side, when booted in Windows.
    First suggestion would be to empty trash when booted in OS X.
    You can use OS X: About OS X Recovery - Apple Support as a worst-case scenario, if necessary.

  • Cannot see data in BSO from transparent ASO partition

    I have 2 cubes: BSO (target) and ASO (source).
    BSO should show data from ASO corresponding element "Fact" from dimension "Scenario".
    I can see the data using ASO directly, but I cannot see data viewing it from BSO using transparent partition...

    Hi,
    When you have the data in the ASO( i.e source cube) ,it should reflect in the BSO ( i.e destination) . I am sure there is problem with the transparent partition ,you had created .Validate and share more info of error ( if you encounter during partition creatino) , that should be resourceful
    Sandeep Reddy Enti
    HCC

  • ASO Cube with BSO Partition as a Target

    Hi,
    Can someone please explain me the following because after reading different blogs as well as some other Essbase documents I am not able to understand,
    What is the actual use of having a BSO Transparent partition (target) of an ASO cube (source)?
    How exactly does the Write-Back functionality works if I have a BSO Transparent partition (target) of an ASO cube (source)?
    And lastly, in what business scenario one would implement a BSO Transparent partition (target) of an ASO cube (source)?
    Your help is much appreciated.
    thanks,
    fikes

    I have a situation where I have a BSO (target) on top of an ASO (source).  This was to try and resolve the dynamic time series (where time and periods are in different dimensions).  The DTS works almost great in the BSO partition.
    The other problem (or why we wanted to go to ASO) was that BSO cubes do not handle attributes across partitions (we have quarterly data in transparent partitions) to the target cube. -- but we do have dynamic time series.
    What I'm facing now it that the attributes work in the BSO (target) except when using a dynamic time series.
    The attributes are defined in both the BSO and ASO cubes.
    Any suggestions on how to handle attributes AND dynamic time series ?

  • Problem with replicated partitioning between two BSO db's. version 9.3.0.1

    Hi there,
    I have a problem with partitioning between two BSO db’s.
    I created the partition, it validates and I made an export for the partion definiton(xml file).
    Everything is fine if I set this partition up as transparent partition.
    This means I can see the data from the src in the trg db as ecpected.
    But when I change over to replicated (what in fact I want to do) nothing happens for the trg site - there are still no data. (Yes I have choosen Update all cells.)
    I got no error in any way neither AAS nor in the app logs of src and trg.
    (Mayby this it important: one src-dimension is mapped to void for the trg.)
    Can anyone give me a hint or even confirm this behaviour ?
    Thank you in advance
    Andre
    Below the log infos:
    log of src db:
    [Fri Dec 04 15:29:03 2009]Local/AAA///Info(1013210)
    User [hyperion] set active on database [db]
    [Fri Dec 04 15:29:03 2009]Local/AAA/db/hyperion/Info(1013091)
    Received Command [PutReplicatedCells] from user [hyperion]
    [Fri Dec 04 15:29:03 2009]Local/AAA///Info(1013210)
    User [hyperion] set active on database [db]
    [Fri Dec 04 15:29:03 2009]Local/AAA/db/hyperion/Info(1013091)
    Received Command [XferReplicatedCells] from user [hyperion]
    [Fri Dec 04 15:29:03 2009]Local/AAA///Info(1013214)
    Clear Active on User [hyperion] Instance [1]
    [Fri Dec 04 15:29:03 2009]Local/AAA/db/hyperion/Info(1023005)
    Update of replicated partition elapsed time : [0] seconds
    [Fri Dec 04 15:29:03 2009]Local/AAA/db/hyperion/Info(1243010)
    Partition refreshed
    log of trg db:
    [Fri Dec 04 15:29:03 2009]Local/AAA1///Info(1013210)
    User [hyperion] set active on database [db]
    [Fri Dec 04 15:29:03 2009]Local/AAA1/db/hyperion/Info(1013091)
    Received Command [ReqXferReplicatedCells] from user [hyperion]
    [Fri Dec 04 15:29:03 2009]Local/AAA1///Info(1013210)
    User [hyperion] set active on database [db]
    [Fri Dec 04 15:29:03 2009]Local/AAA1/db/hyperion/Info(1013091)
    Received Command [ProtocolXchg] from user [hyperion]
    [Fri Dec 04 15:29:03 2009]Local/AAA1/db/hyperion/Info(1023044)
    Processing distributed request from [P4B5A856A, AAA, db]
    [Fri Dec 04 15:29:03 2009]Local/AAA1/db/hyperion/Info(1013091)
    Received Command [PutLastUpdatedTime] from user [hyperion]
    [Fri Dec 04 15:29:03 2009]Local/AAA1///Info(1013214)
    Clear Active on User [hyperion] Instance [1]
    [Fri Dec 04 15:29:03 2009]Local/AAA1///Info(1013214)
    Clear Active on User [hyperion] Instance [1]

    It sounds like you are doing it all correctly. One thing you might try just to be sure you are not getting any data in the target database is the following:
    1) clear the target database
    2) Run the replication for all cells
    3) Run an export of all data on the target database
    See if you get anything in the export file, maybe you are getting some of the data or possibly it is a rollup issue. Just a thought.
    Jeff

Maybe you are looking for