Problem with BTNetProtect Plus

Hi,
About two weeks ago there was a major update from McAfee .. the next day my pc kept locking up, I couldn't do anything with it.  So I had to open in Safe Mode and restore registry to a previous date before the McAfee update.
That got my pc working again.  Unfortunately, ever since then my NPPlus flashes up every 30 minutes or so, saying either that my Computer & Files are not protected and/or my Internet & Network is unprotected.  I press Fix and the problem goes away.. but temporarily.
If anyone could advise me, that would be most appreciated.
I use windows Vista... for my sins.

I found an article that has direction to fix the error your receiving:
http://support.microsoft.com/kb/931849
I suggest turning off the McAfee software temporarily while performing the troubleshooting steps in the article.
If it resolves the issue with Defender, you should then be able to turn off Defender and use McAfee with no issues.
 Want to get-on Google's first page and loads of traffic to your website? Hire a SEO Specialist from Ocean Groups [url= http://oceangroups.org/]seo pecialist [/url] 

Similar Messages

  • Problem with ISQL Plus

    Hi All,'
    here i am facing one problem with ISQL plus
    i am connecting ISQL plus from Oracle Enterprise manager(OEM) while connecting it throws an error
    "connection was refused when attempting to contact <servername>:5560"
    Please help me out

    After the port you are reporting on your thread, 5560, it looks like you are using a 10g release, however it is advisable to specify both, the os and db version at the start of your thread, isqlplus has had several architectural changes throughout the different oracle versions since it first appeared at 9iR1 going through 10gR2. There have been people who are even surprised to find out it is no longer installed with 11g and unnecessarily find a hard time trying to set it up.
    ~ Madrid

  • Problems with iTunes Plus upgrade

    Is anyone else having problems with downloading?
    I bought the update yesterday, but none of the 69 songs have downloaded. Now, when I click on "Download Now" either nothing happens OR I get a message saying that the iTunes Store is having problems and that it can't connect.
    Yet, I'm reading everywhere that people are doing this just fine. So, what gives?
    I sent Apple an e-mail yesterday, but no response. Any ideas?

    OK, so this finally worked!
    I got an e-mail response from iTunes support and they stated the following:
    "I'm sorry you ran into an error when you tried to use the iTunes Store. This error appears to be caused by a temporary issue with the iTunes Store that should be resolved within the next 24 hours. Please check the iTunes Store again. All features should be working well.
    If you received this error while downloading a large purchase order, please understand that the cause of the error may be a combination of the size of the order you are downloading and the speed of your connection. Please try another connection that is faster than your current connection. If this is not possible, please continue to attempt to download your purchase. This may take several attempts.
    If you have any questions regarding this issue, please do not hesitate to reply to this email. Thank you so much for being an iTunes Store customer. I hope you have a fantastic day."
    Anyway, my connection is perfect, so it must have been something with the store. The tracks have now been updated.
    The frustrating thing is that:
    (1) My "upgrade my library" now only consists of one track — that I downloaded and subsequently deleted long ago.
    (2) I have several other albums/tracks that are in original iTunes format and now available in iTunes Plus, BUT not available for upgrade. This is frustrating; and although I think/hope they will be available soon, I won't be able to update given the fact that the track mentioned above in (1) has been deleted.
    I have sent a reply to the iTunes Store rep about these issues and I will let everyone know what he says.

  • Problem with Nike plus and running in non-Nike sneakers

    I love running with my Nike plus and my itouch, but I've been having trouble with my Nike plus logging incorrect mileage when I attach the foot sensor to my non-Nike running shoes (in one of those little velcro pouches secured to the shoelaces). For instance, I ran a half marathon and it logged 4 miles. When I put the sensor back in my Nike plus shoes (which aren't quite as comfortable for me) everything is fine. Is anyone else having this problem? Should I carve a hole in the insole of my other sneakers to embed the sensor?

    Seems something got corrupted with this VI. Copy things over to a fresh VI and things should be OK.
    See also this recent report of a similar issue.
    LabVIEW Champion . Do more with less code and in less time .

  • Problem with OracleOraDb10g_home1iSQL*Plus service

    Hi,
    Oravle10g creates service named OracleOraDb10g_home1iSQL*Plus. This name does not allow to start this service with the command line prompt:
    net start OracleOraDb10g_home1iSQL*Plus.

    Hi Alison,
    Thank you for your response. You wrote:
    "This is not the Database Service". I did not write that it is a database service. Moreover I wrote that I was trying to start "this service with the command line prompt:
    net start OracleOraDb10g_home1iSQL*Plus" which is one way to start ANY Windows service (another way is use Windows Services GUI). My point was that in the Windows Command prompt I am not able to start it - NET START complains. I came across this issue trying to create a (DOS) batch file to start Oracle10g services.
    You wrote: " I should also add, that there is a command line utility". Correct. Such utilities exist for all services Oracle creates. And this is how I worked around this problem. There is a small thing there - you have to call this utility with the DOS command CALL otherwise if you simply put this utility name on the script line the script will stop at it.
    Regards,
    Vladimir.

  • Strange Problems with Discoverer Plus 10g

    Hello All -
    I'm working an exercise to bring an application online which uses Discoverer Plus 10g as its client. This application is located in an area that I don't have access to, so the symptoms I'll describe have been reported to me by users.
    1) When users log into Discoverer Plus and it launches, it does so with the iconic menu buttons (located below the pull-down menus) disabled and grayed-out. The users are forced to do all operations using the pull-down menus. This is a problem that is consistent across different PCs.
    2) When users do File....Save As.... the "Save Workbook to Database" window opens and the user is unable to modify the filename in the "New name" text field. If the user toggles the "View:" setting at the top of the window, they can then change the filename. This problem has only been reported by 2 users, but it's happening for them consistently.
    3) When a user creates a new report using File....New... the Workbook Wizard opens and all is normal until the "Workbook Wizard - Step 2 of 5: Select Items" page appears. On the items tab, the user activates the pull-down list to select the business area they want to use, and the business area name disappears when the users mouses-over it. So the user must click on the blank business area name to continue. This is a problem that is consistent across different PCs.
    A number of the users' PCs have two Java versions installed on them like this:
    Platform     Product
    1.4     1.5.0_14
    1.5     1.4.2_16
    I had them make sure that 1.5.0_14 is the only one enabled, but that did not remedy any of the above problems.
    At this point I don't know what to try next.
    All help is greatly appreciated.
    Patrick

    Try the 1.4.2_06 java version
    I suggest you remove other java version and stay with just one.
    I do not remember but from some point the java version will use the higher there is and java 1.5 from my experience
    is not working with the discoverer so well.
    Tamir

  • Problem with SQL Plus

    I'm getting started with Oracle.
    I've just successfully installed Oracle 11g. When I opened SQL plus, and tried typing a statement SELECT SYSDATE FROM dual, the answer display is : 2 .
    Then i tried with SELECT 2*6 FROM dual, and it still appeared with 2.
    I'm really confused.
    Plz explain it to me. Thanks in advance.
    Edited by: user13011143 on Apr 24, 2010 1:10 AM

    Is this what you are seeing?
    SQL> select sysdate from dual
      2  If so put a semi-colon at the end and hit the Enter key.
    SQL> select sysdate from dual
      2  ;
    SYSDATE
    24-APR-2010 03:28:13
    SQL>or more properly:
    SQL> SELECT sysdate FROM dual;
    SYSDATE
    24-APR-2010 03:29:10
    SQL> The semicolon is not optional.

  • Problem with WEBCAM PLUS, CREATIVE

    Hello,
    I Have a WEBCAM PLUS, CREATIVE Model N CT6840.But the threading of the objective, was blocked. I dismounted the Webcam, but I broke, 2 condensers. You can, to give me the value, of the condensers:C27 and C43.
    Thank you by the advance, of your assistance.
    bjeles

    Hi tolmen,
    When you say that the webcam isn't detected, is that by the Webcam software, or by the Windows Device Manager?   Did the webcam ever work?
    Check out Webcam Troubleshooting (Windows 8), specifically look at the section called Webcam is not listed in Device Manager, and follow the steps you see there.  Post back to this thread the results and we can go from there if you are still having problems.
    Good Luck!
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Problems with iTunes Plus in Canada?

    As the subject suggests, I'm in Canada. I can open the iTunes store, no problem but when I try to connect to iTunes Plus from the Quick Links portion of the iTunes store, I get an error saying "Could not complete iTunes Store request. The store may be busy". Is iTunes Plus available in Canada?

    Jason Lixfeld wrote:
    That's just it - as far as I understand the only place you can get the "upgrade my library" menu is from within the iT+ in Quick Links,
    Jason Lixfeld wrote:
    Negative. As I said above, you should get an iT+ window just about under the Download of the week. From there, you get to the iT+ store, and THEN, you have an Update My library option, in big letters, which will say how many of your aac 128 songs can be upgraded.
    From my end, all you see under Quick Links is «Itunes Plus», which leads to an error message.

  • Scanning problem with hp6500a plus

    My HP Officejet 6500A plus all in one printer won't scan to my Windows 8.1 (64 bit) computer -- I've reinstalled HP Win 8.1 drivers several times.  I can print to the printer, the computer detects it, but I cannot scan to the computer.  Anyone have any ideas on how to fix this?

    Hi @Markino ,
    Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Officejet 6500A PlusPrinter and not able to print to your Windows 8.1. Here is a link to the HP Print and Scan Doctor. The HP Print and Scan Doctor will run a check on your system and the printer to make sure all is good.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • IPod touch pairing problem with jam plus speakers

    Hi I'm able to pair two jam plus speakers together and appear on the touch, but when you play music it keeps pausing on the touch, reset them and repaired and this keeps happening, does anyone have any ideas?

    Does it work when paired to another device?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.

  • HT1390 I got a hulu plus, I was able to see tv shows but now is not loading up any. Call hullu but they say is a problem with apple not them can u help. I also try to go to the apple store but is saying that I need iOS 5 to up date, I have the first IPad.

    I am having problems with hullu plus, to wach tv shows or any, I call them but they say the problem is with my iPad, bur I used to wach with no problems do you have any suggestion. On wath to do?

    Update your iPad to iOS 5.1.1. Connect your iPad to your computer, launch iTunes then click on the Check for Update button.

  • QuickTime problems with Lion

    I wanna know if someone can help me. I just upgraded to Lion and been having some problems. I'm not an advanced user, so maybe I'm doing something wrong. When I try to open an .avi file (by default with QuickTime Player) it says that I have to use QuickTime 7. I didn't have this problem with Snow Leopard. I installed QuickTime 7 and now I can open these files with it.
    I read here that I could be using more than one codec, so maybe they were interferring with each other. So I uninstalled all my video apps (using Clean My Mac) and kept just Perian (as suggested by some users), but still won't work.
    Will I have to keep using QT 7?
    Thank You

    I had the same problem with QT plus other problem for some other apps. all got solved when i activated my guest account
    steps..
    "Go to preferences>Users&groups
    activate your guest account
    run the application there and done.
    I got the answer from answers.downloadatoz.com btw
    hope everything turs out ok..

  • Problem with tv@nywhere plus on windows 8

    hi
    i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
    i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
    so what should i do for my problem?

    I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

  • Problems with my printer HP Officejet pro 8600 Plus + Yosemite

    Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

    Thanks for this AnnRT!
    I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
    I've now set a static IP for the printer and things seem to be working fine again
    Thanks!
    Chris

Maybe you are looking for