Problem with Build Spec in project explorer

I have LabView Professional Development System. I am using DAQmx with a USB 6221. I need to include the nilvaiu.dll in an installer I am trying to create. However, I can not get this dll to appear in the 'Preview' screen when I create setup the build spec to create an executable (before creating an installer). The lvanlys.dll does appear. Both the dll's are in the 'dependencies' section of the project.
Can you help me?

Thanks. I have built the installer. But the file is so large I am still waiting for it to install on the target PC. I will let you know how it goes tomorrow. Never thought I would use a thumb drive with more than 1GB but the final installer was 865MB. Is that right?

Similar Messages

A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab

I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
I have reset IE9. Same problem.
I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
Any suggestions for how to solve this (other than using software rendering)?

Thanks again for your reply. I appreciate the time you have taken to respond.
I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
2. Use another browser - I have no problems with either Firefox or Chrome

Problem with the% deviation from Project Server 2010 field

hello
I have a problem with the% deviation from Project Server 2010 field.
Within a file or project, this project contains tasks.
Each task has completed the field% deviation.
Within the row "Summary" in the field of% deviation does not perform the sum of all fields of tasks.
Only occurs on certain projects, these projects have the view of PR Progress Report
Anyone know happens?
thank you very much

Hi
Sorry, I'll be more specific now.
Within the field% deviation. Your settings in PWA is:
The formula for field% Deviation:
Str (IIf ([Job baseline] = 0; IIf ([Working] = 0, 0, 100); IIf ([Working] = 0; -100; Int (100 * ([Job] - [Work Online base]) / [Working baseline])))) + "%"
Under the heading rows Calculation Summary:
> Use formula.
Within the field Allocation Calculation of rows:
> It is labeled the "Apply unless you manually specify".
The field [Job] and field [Job baseline] are fields Pack project server.
The error is in project, in the list of tasks.
In the top row, this row summary makes the sum of the ranks of the tasks of the file.
But in my case only in the summary field the same value appears in the tasks.
In all the cells in column% deviation appears the same value.
I hope it helps.
thank you very much

FCP 5 has problems with how I did projects under FCP 4.

For the most part, I've been very happy with FCP 5, but it's very buggy in a couple of respects that pertain to how I create my projects. Now, I'm getting an error that is preventing me from finishing a project, so I don't have to tell you how critical my issue is, nor do I have to emphasize how quickly I need an answer.
To begin with, I will explain how I did my projects under FCP 4. I would begin by capturing all the raw footage in OfflineRT with my Power Mac G5 dual 2 GHz, then copy the project file and all media files to their respective locations on my 12-inch PowerBook G4, for portability. I would complete the offline edit on the PowerBook, then create an online project file, which I would then transfer back to the Power Mac. I would recapture footage in the new project, everything would fall into place, and all was well.
Since "upgrading" to FCP 5, this method doesn't seem to work anymore. The first sign of a problem was when I created the online project file on my first FCP 5 project. After an attempt to re-capture the footage on the Power Mac, I got an error message that the video was in an incorrect format, or something like that (unfortunately, this was some time ago, so I don't remember the exact phrasing of the error message). I was able to resolve the issue by unchecking the box in the media manager to delete unused media from duplicated items. This forced FCP to create an online file that captured every frame of my original raw footage, not just the parts that were used in the online edit. It took up more space, but at least I could get the project done.
Now, I'm getting more strange behavior, and it's preventing me from completing my latest project, even though I'm following the same steps I did on my previous project. The first thing I noticed this time was when I first tried building the online project file using Media Manager, it took a VERY long time to build the list of used media - something on the order of 15-20 minutes, when before it only took seconds for similar projects. Then, I got the following error message once the new online project had been created:
"Reconnect Media Failed: An unknown error occurred while trying to reconnect C-2 to the new offline file." This error kept occurring multiple times when I clicked continue until I finally checked the box next to it asking to ignore these reporting errors.
C-2 is one of the master clips for my project.
Undaunted, I proceeded to see if moving the new online project file to the Power Mac and re-capturing the footage in NTSC DV would work. Curiously, the Power Mac needed to capture C-2 twice. Although the length of the clip is only 45 minutes or so, FCP needed to capture 90 minutes. Unfortunately, after capturing, I got the same error message as before, but with different phrasing:
"Reconnect Media Failed - An unknown error occurred while trying to reconnect C-2 to the newly captured media. Try recapturing this clip to resolve the problem."
Recapturing the clip doesn't solve the problem. I keep getting the same errror message. Since this clip is one of my master clips, I simply cannot complete the project unless I can capture this clip somehow and have it reattach to the offline files.
The only thing I can think of, since I've been making projects this way since FCP 3 with no issues, is that it has something to do with FCP 5's new multiclip function. I have been using it extensively, and I suspect the error I received the first time was because every clip was linked to others through multiclips, and some shifting of in or out points may have occurred, which broke this link. Forcing FCP to capture all raw footage in its entirety resolved that issue the first time, but not this time.
Would someone PLEASE tell me ASAP how to fix this? How can I complete my project in online, DV-NTSC quality? Is there a possibility I can recapture the files in my offline project in DV quality, perhaps?
How can I prevent this from happening in the future? As I said, this never happened before I upgraded to FCP 5, and if this is the price I have to pay to have multiclip editing, I don't know if it's worth it. Maybe I should get a refund.

Finally found the answer myself. My camcorder glitched during the offline capture session, and it didn't recreate the glitch during the online capture, so the frame counts were different.

Problems with building blueprints catalog

Hi,
I've got some problems building bp-catalog v 0.8 on a windows 7 machine, GlassFish 3.0.1.
I've properly changed build.properties file and executed "ant setup" but when I issues the "ant run" command, the compiler can't find packages (JSF packages mainly).
Why it cannot find jars? The ant script should include glassfish jee jars into classpath...right?
I've got the same problem with Petstore but since it's a netbeans ready project, I easily imported it and configured the runtime to GlassFish, and this solved the problem.
With the bp catalog, it could be pretty handy to build and deploy all the projects, without to import one by one in netbeans and manually solve the missing references problems.
Many thanks in advance:
E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8>ant run
Buildfile: E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\build.xml
default:
default:
default-ear:
-pre-compile:
bpp-actual-compilation:
[echo] Compiling bp-ui-5
[javac] Compiling 61 source files to E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\build\classes
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:14: package javax.faces.component.html does not exist
[javac] import javax.faces.component.html.HtmlInputText;
[javac] ^
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:15: package javax.faces.context does not exist
[javac] import javax.faces.context.FacesContext;
[javac] ^
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:16: package javax.el does not exist
[javac] import javax.el.MethodExpression;
[javac] ^
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:45: cannot find symbol
[javac] symbol: class HtmlInputText
[javac] public class AutoCompleteComponent extends HtmlInputText {
[javac] ^
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:47: cannot find symbol
[javac] symbol : class MethodExpression
[javac] location: class com.sun.javaee.blueprints.components.ui.autocomplete.AutoCompleteComponent
[javac] private MethodExpression completionMethod;
[javac] ^

Hi,
I've got some problems building bp-catalog v 0.8 on a windows 7 machine, GlassFish 3.0.1.
I've properly changed build.properties file and executed "ant setup" but when I issues the "ant run" command, the compiler can't find packages (JSF packages mainly).
Why it cannot find jars? The ant script should include glassfish jee jars into classpath...right?
I've got the same problem with Petstore but since it's a netbeans ready project, I easily imported it and configured the runtime to GlassFish, and this solved the problem.
With the bp catalog, it could be pretty handy to build and deploy all the projects, without to import one by one in netbeans and manually solve the missing references problems.
Many thanks in advance:
E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8>ant run
Buildfile: E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\build.xml
default:
default:
default-ear:
-pre-compile:
bpp-actual-compilation:
[echo] Compiling bp-ui-5
[javac] Compiling 61 source files to E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\build\classes
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:14: package javax.faces.component.html does not exist
[javac] import javax.faces.component.html.HtmlInputText;
[javac] ^
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:15: package javax.faces.context does not exist
[javac] import javax.faces.context.FacesContext;
[javac] ^
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:16: package javax.el does not exist
[javac] import javax.el.MethodExpression;
[javac] ^
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:45: cannot find symbol
[javac] symbol: class HtmlInputText
[javac] public class AutoCompleteComponent extends HtmlInputText {
[javac] ^
[javac] E:\user\My Documents\Learning\SoftwareEngineering\JavaProjects\bpcatalog-ee5-ea-0.8\components\ui\src\java\com\sun\javaee\blueprints\components\ui\autocompl
ompleteComponent.java:47: cannot find symbol
[javac] symbol : class MethodExpression
[javac] location: class com.sun.javaee.blueprints.components.ui.autocomplete.AutoCompleteComponent
[javac] private MethodExpression completionMethod;
[javac] ^

Problem with build file

Hi All,
I have an unique problem.
I have a build file which is runnin successfully on a local but not on the server.The error is class not found, so definitely problem with classpath.
but acc. to my knowledge the build file is setting up the classpath in the file only, so its independent of my classpath settings in the system.
Please help
the snippet fo build file
<project
    name = "SqlcSamples"
    default = "bundle"
    basedir = ".">
    <property file = "build-sqlc-eu.properties"/>
    <taskdef name = "sqlc" classname = "com.pavelvlasov.sqlc.StatementCompilerTask">
        <classpath>
            <fileset dir = "${project.components.lib}" includes = "**/*.jar"/>
            <fileset dir = "${sqlc.home}/jars" includes = "**/*.jar"/>
        </classpath>
    </taskdef>
[/code]
its saying 'com.pavelvlasov.sqlc.StatementCompilerTask' class not able to found

Best is to use the ant documentation; I often need it.
ant without options will use build.xml, as "makefile".
In the build.xml you define your default target.
project basedir="." default="all"
property name="src.dir" value="."/
property name="classes.dir" value="../build/classes"/
target depends="compile" description="Build everything." name="all"
mkdir dir="${classes.dir}"/
javac debug="${debug}" deprecation="${deprecation}" destdir="${classes.dir}" srcdir="${src.dir}"
classpath
pathelement location="${libs.dir}/jdom.jar"/
/classpath
/javac

Problem with index in merged projects

Dear Sir,
I have a problem with index in the master project, I can only
view the master project index keywords under the index tab. My
master project contains 2 topics besides the other sub projects. I
have created index for all sub projects indvidually and at the end
I created the master project index.
I made sure that the 'Binary Index' flag is ticked before
compilation and stil the problem is on, do somebody know what could
be the problem.

Hi,
Two points here.
Firstly, you can duplicate SSL's. (Right click on an SSL in
the projects sub-directory and select the duplicate layout option.
This will give you a copy of the original SSL).
I tend to have two SSL's - one is local and I use that every
time I test compile the project when I'm working on it.
The other is set to output to the master project. I use that
once I'm happy with the sub-project and start working with the
master project.
Second point is to be aware of how RoboHelp treats the
imported/merged .chm files from the sub projects.
It imports them into the main project master directory - then
when the master project is compiled it puts a copy of them into the
master project SSL. However, if you re-compile it doesn't overwrite
the files that are already in the master project SSL directory.
This is why you have to be aware of where the sub project
.chm files are going - you need to make sure that if you revise the
sub projects, a fresh copy of the .chm files ends up in the output
SSL directory of the master project.

Problems with Photos and Fonts and Explorer

I am having problems with photos and fonts when my site is viewed on Explorer. The site is Ostyn-Newman.com The problems can both be seen on the start page -though they happen throughout the site. The photo is supposed to be only 30% opaque and it shows fine on Firefox or Safari, but Explorer viewers get the photo being used as wallpaper at 100% and this steps all over the text. Should I give up a using a photo as wallapaper?
Also the font I am using for "Ostyn-Newman Objects for Fine Homes" shows well in Firefox and Safari, but looks really bad on Explorer products. Should I just change the font? I am currently using Snell Roundhand.

See Roddy's posts in these topics:
Re: VIEWING iWEB SITES ON A PC ?
Re: iweb pages memory intensive
Re: iweb site on my personal domain name locks up
The message in each is pretty much the same but he does give some info of an application that can optimize the web pages to make them more readily readable by IE.
OT

Problem with opening pdf files in Explorer

I'm trying to use a button to open a pdf file. It's always
worked in the past, but now I'm receiving an "object error" and the
pdf is not loading. Does anyone know if this is a problem with the
new version of Internet Explorer? Any work arounds?
Here's my code:
on (release) {
getURL("NameofDoc.pdf", "_blank");
}

Hi,
1. It's Adobe Reader XI, ver 11.0.08
I guess the version of the plug-in corresponds with the version of the reader itself?
2. "Page cannot be displayed", mostly
Some say it takes a while for the (small) pdf to open, but we could no recreate this behavior yet.

Problem with starting JHeadstart Enable Project Wizard

Hi,
Ive got small problems with JHeadstart (10.1.3.0.95) at Win2k, JDev (10.1.3.1.0.3984). After adding all DB related stuff to new application project Im trying to use function "JHeadstart Enable Project Wizard" from right-click context menu available under "ViewController". And here comes all my headache - after first warning screen Im going to the next one when the text box is empty and clicking on Finish button doesnt work. I can only click Cancel.
It would be cool to get fast any good advice as Im trying to finish my term project on Monday.

Piotrek,
I tried to reproduce your issue without success.
I would be very grateful if you can send us a sample project with the DB tables where the JHeadstart Enable Project Wizard does not work.
You can send the testcase to [email protected], and make sure you rename extension .zip to .zipped, otherwise the mail is refused by our mail server
Thanks!
Steven Davelaar,
JHeadstart Team.

Problem with build 10049

My notebook installed the latest update windows 10 preview build 10049. When it was installed, every time after the startscreen the screen turns blue and the notebook restarts. On the screen was a message it had problems with the ??.sys file. After installing
backwards the 10041 Build i can not see an update to the 10049 build anymore. Can someone help me?

Hi,
Yes, pleaes make sure to change to to "Fast", if still no help, then please check the registry, make sure its value shown as below:
Open regedit.exe
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
Ensure the following values exist:
{value name}, {value type}, {value data}
BranchName, REG_SZ, fbl_impressive
ThresholdOptedin, REG_DWORD, 1
ThresholdRiskLevel, REG_SZ, low
Delete all other values
Open Settings > Update & recovery > Windows Update
Tap or click Check for updates
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problem with building array inside a case statement

I have a problem with my build array.
Iam trying to construct a build array when ever I see a new element in my parent array during run time.
Using shift registers, search array and If- case structure, inside a while loop. Iam implementing this logic (I dont want to use Event structure).
Iam able to achieve most part of it, but have a problem with the first element. Except the first element of my parrent array, every thing is appending in to the build array. Can any one look at my vi and suggest me what Iam doing wrong here.
Thank you
Attachments:
debug.vi ‏12 KB

I think you need to replace the tunnels (carrying the array) in the for loop with a shift register.
Lynn

Problem with building web service control

Hi i am using a web service control for invoking a web service. the application builds correctly from workshop and i am able to talk to web service. However, when i exported the ant build file from workshop and tried to build the application from prompt using ant, it gives me follwoing wrror -
[wlwBuild] [Build] Errors found in D:\crmwork\weboss\esb\ESBPrj\com\covad\esb\controls\BillingServiceSBControl.jcx:
[wlwBuild] [Build] Error at line 9 column 18:
[wlwBuild] [Build] Description: 'com.bea.wlw.runtime.jws.compiler.ServiceCtrlChecker$JcxValidateControl' could not be created.
[wlwBuild] [Build] Prescription: The class could not be created. Verify that it has a no-argument constructor.
[wlwBuild] [Build] Error at line 9 column 18:
Has anybody encountered this error? What could be the problem cause the workshop build works fine.

I solved the problem :-)
it happened due to JAVA_HOME env var. It has to point to jdk that comes along with wl812. mine was pointing to sun jdk 1.4.2. However, this is a bug, because, for wlwlbuild task , i was setting the proper bea java home, still it was failing due to system java_home var. And i did not face this problem with WL813. After facing lot of issues with 812, now i feel, 812 is not a stable production version.
Anyways, now the prob;em is solved.

Problems with build in wifi card in DV6-2190us.

Hi am trying to see if someone can help me out with a problem am having with my WIFI and also LAN on my laptop.
The problems am having is with connectivity and speed on WIFI and also problems connecting to a network with a Ethernet cable.
The problem am having with my wifi is when trying to connect to a network it takes me about 5 to 10 minutes just to try to connect to the network and once connected it will continue to say unidentified network and it will take 5 to 10 minutes to connect to the internet. Once connected to the network and the internet the connection will start fast and slow down to a crawl even do am 10 to 20 feet away from the wireless router and I have full bars. After the connection slows down I will get disconnected from the network and it will take me 10 to 20 minutes to get back on it.
Also when I try to connect to the network using a Ethernet cable I will get connected but if I unplug the cable and try to connected again I won't be able to connect to the network or the internet and I would have to restart the laptop with the cable plugged in.
All of the drivers on the laptop are up to date and also windows is up to date I really don't know what's going on.
I have formatted and installed Widows 7 done all of the updates I have also updated all of the drivers for the laptop but the problem continues to come up.
After talking to some of my IT friends we removed the build in wifi card from the inside of the laptop and changed it with a wifi card of a same model laptop to rule out problems with the card, but the problem continues to happen with the new card installed on the laptop. The card that came out of the laptop with the wifi problems was installed to the second laptop and the wifi problems came up but after installing the original wifi card the problems went away.
The thing that trying to figure out is why the card that came out of the working laptop won't work correctly on the laptop that's having problem with.
If anyone has any ideas on what maybe causing the problems please reply to this post I really need to have this problem fix before I start taking online classes.
Thank you for taking the time to read this post.
Laptop information.
DV6-2190us
Windows 7 64bit Home SP1
i7 1.60
Ram 8gb
AVG Pro 2012

You are posting on an iMac forum. I'd recommend posting a MBA forum, however I think you best bet is taking it into your local Apple store or AASP to determine if the Wi-Fi adapter is damaged and if it is then checking to see what options you have.

Problem with building conditional display items

Dear All,
Please help as I am using APEX for the first time.
This my requirement during form dispaly in tabular format. There is one display item QA_TIER(not a database item). This item value is computed based on the condition below.
I created a display item with :
Source Used : Always, replacing any existing value in the session state
Source Type: PL/SQL Expression or Function
Source value or expression:
begin
if 2<=(select decode(&Leg_Req,'Y',1,0)+decode(&maj_funct_chg,'Y',1,0)+
decode(&maj_tech_chg,'Y',1,0)+decode(&maj_ui_chg,'Y',1,0)+
decode(&maj_def_met,'Y',1,0) from dual) then
if &Customer_Priority = 1 then
return 1;
else
return &Customer_Priority-1;
end if;
ELSE return &Customer_Priority; end if;
end;
Note : All reference with '&' are the actual field name.
When running the page i get the following error message:
ORA-06550: line 2, column 23: PLS-00103: Encountered the symbol "&" when expecting one of the following: ( ) - + case mod new not null others select table avg count current exists max m ORA-06550: line 2, column 48: PLS-00103: Encountered the symbol "&" when expecting one of the following: ( ) - + case mod new not null others table avg count
     Error      ERR-1020 Error in PLSQL item processing (function).
Can anybody help me with building the display item with conditions as show above.
Thanks in advance

hi thanks for the help.
I tried this time source type SQL Query:
with both suggestions
1.
select (case when
2<=to_number((select decode(v(Leg_Req),'Y',1,0)+decode(v(maj_funct_chg),'Y',1,0)+
decode(v(maj_tech_chg),'Y',1,0)+decode(v(maj_ui_chg),'Y',1,0)+
decode(v(maj_def_met),'Y',1,0) from dual)) then
(select decode(v(Customer_Priority),1,1,v(Customer_Priority)-1) from dual)
ELSE v(Customer_Priority) end) from dual
Result:
ORA-00904: "CUSTOMER_PRIORITY": invalid identifier
     Error      ERR-1019 Error computing item default value: page=2 name=QA_TIER.
2.
select (case when
2<=to_number((select decode(:Leg_Req,'Y',1,0)+decode(:maj_funct_chg,'Y',1,0)+
decode(:maj_tech_chg,'Y',1,0)+decode(:maj_ui_chg,'Y',1,0)+
decode(:maj_def_met,'Y',1,0) from dual)) then
(select decode(:Customer_Priority,1,1,:Customer_Priority-1) from dual)
ELSE :Customer_Priority end) from dual
Result:
ORA-00932: inconsistent datatypes: expected NUMBER got CHAR
     Error      ERR-1019 Error computing item default value: page=2 name=QA_TIER.
Both didn't work.

Problem with Build Spec in project explorer

Similar Messages

Maybe you are looking for