Problem with built in Sound

I have this simple PE NEO-2 motherboard .. and i use the built in sound of the board... the problem i m having is that the sound suddenly disappears during the game.. or other music application... sometime it disappear after 2 min or some time after couple of hours...
So is my board faulty... or problem with drivers or bios update.??
Thanks

k.
well basiclly, when i had the same sound card on my 865PE Neo 2, it had the same problems. take battlefield Vietnam for example, the jet sounds would disappear after a while and come bak very very choppy, as did the weapon sounds. they actually reversed the sound. playing prom back to front.
The problem is the card it self. MSI take no pride what so ever in their sound.
the only way to fix, is either lower sample rate, which resluts in cracklier sound, updating drivers, which sometimes dont work, or just simply upgrading your sound card.
because of this problem i went out and baught my self a Creative Sound Blaster Audigy2 ZS Platinum pro.
frankly.
it i WELL worth the money.
if you want a budget card but still verry good, look for the Sound Blaster Live range. verry verry good.
Hope i am of some service to you all

Similar Messages

A problem with ALL creative sound cards i am hav

All creative sound cards that i've used, three i think in the past year. SB Li've, SB Audigy 2 ZS, and the Audigy 2 Zs Platinum Pro. Every time i connect speakers or headphones to the jack, i get really REALLY low sound output, also before windows loads or shuts down i hear a "bump" coming from my speakers/headphones.... I have no idea whats going on....
Specs are:
p4. 3.0
DFI Lanparty 875 rev. B
gig corsair pc4000 dual channel
2x raptor raid 0
SB Audigy 2 ZS Platinum Pro
ATI Radeon x800pro
Headphones i use are bose acoustic 2 headphones
Speakers are logitech x-530
If anyone has had this happen to them before or if anyone has any possible remedies for this I would really appreciate, if this doesnt help im done with creative sound cards =/
[edit]: forgot to mention this is only for the audio jacks on the sound card itself, on the ZS platinum pro, when i connect to the jack on the hub, the sound is alrightMessage Edited by mrkuku on 06-2-2005 06:36 AM

figured out my problem, my built in sound card drivers were conflicting with the creative drivers. Thought that if i turned off the built in sound card from bios that i wouldn't need to delete the drivers also. Thanks for any that read this and tried to figure it out. Now its working like a charm.

Problem with kde and sound

Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!

Pilli wrote:
Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!
Change the player to mplayer or something in the control panel (Sound and Multimedia - System notifications - Player Settings).

I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Problem with SB1240 USB sound card

I'm pulling hair here! I've just bought a SB240. Windows (XP Pro, SP3) detected it and I can select it fine for listening. But when I open Sound and Audio Device Properties and select Sound Recording/Volume, I see the Capture panel with the three inputs, but all the controls are greyed out and immovable. I also use the application "Total Recorder" by High Criteria, in which I can select the SB240 device but the only input line it sees is SPDIF Interface.
I'm stumped. Can anyone help?
John?

&Re: Problem with SB240 USB sound card
Thank you. I did a complete uninstall, including the device itself (from Device Manager) as well as all drivers and any SB related software. As recommended by Creative, I had previously installed the driver software from the supplied CD and that seems to have been the problem.
I let Windows re-detect the SB, but? got a "problem ... device may not work correctly.." during the detection, so I was not hopeful (this had not happened the first time I installed the device).
Nevertheless it now does work fully and is properly configured in "Total Recorder" too.
So I would suggest not using the supplied drivers and software - at least not in WinXP. But it's not very confidence inspiring.
John

Problems with my Creative Sound Blaster X-Fi Xtreme Gamer bulk P

Hey there!!!
I acutally have a Problem with my Creative Sound Blaster X-Fi Xtreme Gamer bulk PCI-Card. The Card by it self is working perfectly. But i cant use the Digital-In as the Mic in. I dont know how to turn it so that the Digital-In is the Mic-In. So my Microphone donst work. I hear everything but nobody hears my Voice. There is sometimes a Signal but not the correct, the Guys playing with me dont hear anything of my voice...
Can somebody help me plz?
Greetings Thomas

Moep wrote:
Why i must use TORRENT?
Why is this driver not on your page?!
Please fast help...
and this is a secure download you mean? ....
Jeez, calm down already. I never said you HAD to download it, but if you want any of the applications that work in XP to work in Vista then you're going to need that disk; either by downloading it or fromk here,?http://us.creative.com/products/prod...7&product=6743?
2. ISN'T THIS THE DRIVER FOR ME?! http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7838Message Edited by Moep on 07-3-20070:7 PM
Maybe you really should take a vallium or something and re-read what I posted, then you may just grasp the fact that that is the exact driver I told you you needed.

I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No pr

I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No problem tones, watching videos. This problem or is it something normal?

I have this problem too, but it is intermittent. Sometimes the lock/unlock volume will drop to barely-audible, even though in settings the volume slider hasn't changed. If I then move the volume slider, it fixes the problem and the lock sounds jump back to normal, but then later on the problem will happen again.

Problems with startup / no sound / webvideos

Hello everyone.
Since I last updated my iMac two days ago 02/18/09 (accepting program updates, and also a security update from apple) my computer is running differently. The startup takes forever (wheel screen, blue screen) and and it seems that the computer doesn't locate the sound board, answering at the "system preferences that there is no output / input devices found (not even built-in speakers) .
So if anyone can help me solve this I would be very thankful. Since there is a lot of small problems, I will separate them here:
1. Long startup
2. No sound
3. Internet videos not functioning
4. Scrollball at the mouse seems broken
Thanks!
Luis Corvini Filho

Luis,
Welcome to Apple Discussions.
I would recommend that you download the [Mac OS X 10.5.6 Combo Update|http://support.apple.com/downloads/MacOS_X_10_5_6_ComboUpdate] and install that. Some folks (myself included) who have had problems with the Software Update have been able to get a stable system via installing the Combo. It is a large file (668Mb) but in my view worth downloading and installing.
Chris

I am having problem with speaker the sound is not coming properly from it also the right side hinges

Hi,
I am having problem with speaker from last few days when ever i tryed to play songs the speaker is not giving sound properly. Secondly the the right side hinges also boken so needed support for both the problems.
Thanks & Regards
Umender Sahani

First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not help, set it up as new device, explained here:
How to erase your iOS device and then set it up as a new device or restore it from backups
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support

Problems with built-in memory

Hi everyone!
I have a blackberry torch 9810, 7.1 bundle.
I have a problem with my built in memory. ever since I lost my memory stick, ii started using my built in memory since it's a 6.2 GB memory. so ii once plugged my bb into my laptop, and when unplugged, everything just disapeared! picture, music, recordings, everything. It wouldn't apear but ii know it's there because when ii plug into a laptop would say 2.3 GB used. Ii security wiped my phone once and it started working perfectly again. then the problem came back again after a while! How do fix this problem?

This only happens every-time you connect your blackberry to your laptop everything disappeared correct?

Having Problems with built in iSight

Hi,
I am having problems with the computer finding my built in iSight camera, I just updated to Mountain Lion and now no applications recognise it.
I have tried turning it off and on again, and switching to different users, but none can identify a connected camera.
Help?
Specs Here
Thanks
Frankie

Hi englishguru,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful for troubleshooting the camera on your MacBook:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Since you've determined that the behavior isn't user specific, try these steps:
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
Regards,
Jeremy

Problems with built-in iSight and iChat! Nothing works!!

Hello,
i have a problem with my iChat, iChat said that no camera is connected, but the built-in iSight works with Photobooth!
I read many Threads here but no solution works,
there is also an entry in the system profiler USB --> built-in iSight
I closed all other Aplications like Photobooth, iMovie and so on,
than i checked the activity monitor.
I changed the settings in iChat (bandwith) and Quicktime (bandwith)
I did a PRAM reset...nothing changed!
I did a SMC reset...also nothing changed!
The built-in iSight doesnt works with Skype, too!
Please help me!

Hey, I hope people aren't getting annoyed by my compulsive posting, but I think this solution needs to be spread, it doesn't get enough publicity:
the issue is that with 10.5.1, a certain quicktime component that acts as a USB controller for the iSight camera is given an expiry time (i.e., the file is given a feature similar to "trial periods"). This file is then deleted, and iSight ceases to function. All that need be done is to replace the component, by downloading it here:
http://techslaves.org/index.php?PHPSESSID=q8frk8vf81l0f8echu6mj0plk0&action=tpmo d;dl=item16
(disregard the version marking, it works for 10.5.2 in the very least)
Copy it to ~/System/Library/Quicktime, then reboot and it should work.

Problems with "Line-In sounds" after rebooting..

Hi,
I have some problems with my TV card. When I press reset button or switch on my PC and wait, about 3-5 sec. ahead of enter to Windows XP SP1, I can hear PFFFFFFFFFF.... from my speakers. I hear it until I activate MSI radio or MSIPVS (programs using LINE IN input).....then is "Line IN sound" is OK. If I close all MSI applications..... Line IN is Silent - That's right!!
Please help me, what can I do ....
I tried old and newest drivers....but still PFFFFFF ....agrrrrhhh !!!!
I have 2 sound cards (and 1 on board) and problem is still identical.

The problem is related to the Crossbar driver
There was a solution posted befrore in this forum and that was to change the crossbar driver from MSI with one of from a leadtec xp2000
check https://forum-en.msi.com/index.php?threadid=40100&sid=&hilight=crossbar+driver

Problem with 5.1 sound on Audigy sb0

after a long struggle with the drivers I managed to find one that installed correctly. Still, I have a problem with 5. sound. When I do the speakers test all the speakers work fine but when I play mp3 or video on WMP only front speakers work. I suppose that it is still the driver problem.
I have this driver installed.
http://files.filefront.com/SB+Audigy+Value+SB0570rar/;5367665;/fileinfo.html

Neal702,
Please don't type in all caps, it is considered shouting and rude. I'm sure that wasn't your intention, it's just good netiquette.
Anyhow the iMac will put out 5.1 sound assuming that is what you are trying to do. I recommend you find a cable similar to this:
http://www.amazon.com/3-5MM-TOSLINK-FIBER-OPTIC-CABLE-TOSLINK/dp/B00006LVF3

UNRECONIZED PROBLEM WITH SB AUDIGY SOUND CARD

Hi, you all. Pls help me with this problem of my SB Audigy Platinum (SB0060). In Windows XP or even Windows Vista, they can find out my sound card as an Multimedia new hard ware, but when I install sound card driver from CD (original CD driver) fail to install and a message like this: "we cannot find any support products in this computer, pls make sure that is is plugged in your computer already...". I am very disappointed with this 'cause i really like the quality of this Creative sound source. Pls help me. Thanks a lot! Pls answer me : [color="#000099">[email protected](PS: THIS CD DRIVER COMES WITH THIS SOUND CARD BOX, AND I TRY TO INSTALL A NEW FRESH WINDOWS WITH STANDING ALONE SOUND CARD WITH NO CONFLICT TO OTHER PCI CARD, STILL FAILED)

. A friend of mine who also has this soundcard, claims he has a Decoder tab in his device controls in audiohq.. But I dont?!?

That is quite odd. Your Audio HQ should look like this: http://img23.echo.cx/img23/8494/hqdecode7kl.jpg. If not, then you should uninstall you drivers (using the CTZAPXX.exe app on the CD) and reinstall them.
2. When I choose to calibrate my speakers -> basic, FL, FR, RL, RR, C plays ok BUT after that a low freq sound plays for 3 secs then my SL and SR starts to play a high freq beeps respecti'vely...
The program does the same thing on my old T5400 and my current Cambridge MegaWorks 550. My brother has the Audigy 2 ZS also and his Logitech Z-5300s do it as well. I think the program is funky, not your speakers.
3. Since I want to enjoy DTS, I downloaded Windvd, cofigured it to 8 channels (7.). But the SL and SR wont play anything... So I tried Windvds test and all goes well until it is SL and SR turn, they dont play anything... Almost the same as the speaker calibration app. BUT note that in the Creative THX setup console everything works well...

Go into the Options for your DVD software (this applies to any player, not just WinDVD) and set it to S/PDIF Passthrough. This will send the digital signal to your card, which will see it and decode it. Setting WinDVD to 7. mode will try to have the CPU decode the signal. If it doesn't work with WinDVD, then try using Media Player Classic 6.4.x.x and setting the decoder settings to Digital Passthrough. Note that you need to make sure the that decoders are enabled in the Audio HQ (for which you may need to reinstall your drivers.
Note: DTS-ES supports 6.. Dolby Digital EX supports 7., I think.

Problem with built in Sound

Similar Messages

Maybe you are looking for