Problem with bullets in text boxes

Hi,
I haven't seen this problem written up anywhere but I am
having problems with my text formatting differently in text boxes
when I've used bullets in the text. I am using Captivate 2.
So here's what happens:
If the text caption has a bullet
anywhere in the body, when I publish my captivate course, the text
looks like normal 12 pt Arial.
If there is a text box without any bullets, the text looks
like it was bolded.
The next result is that I have two types of body text
throughout my course.
I went into every slide and verified that there is no other
text formatting going on and I did find that Impact was sometimes
in the same text boxes where I had bullets but I finally got rid of
all the impact. However, the problem remains. Can anyone help me?
Thanks,
Lin

Hi Lin and welcome to our community
My guess here is that you are using the Transparent caption
type. When you do this, the caption anti-aliases the text inside
and many claim it looks either bold or fuzzy. You have two options.
1. Use Bullets on all captions. Don't worry, you don't have
to actually SEE the bullets. Just press Enter a few times and apply
bullets to one of the blank lines. Then size the caption so the
bullet part is hidden from view.
2. Implement a trick discovered by fellow Adobe Community
Expert Paul Dewhurst. You can see his trick by
clicking
here.
Hopefully one of these works for you... Rick

Similar Messages

Problems with the Widget "Text Ticker"

Hello, I have a problem with the widget "Text ticker". I tried to put more then one text ticker on my site, but it doesn't work, when I look in Muse it looks like this:
and when I look in the preview only the first text ticker works...maybe it is not possible to have more then one text ticker on one site?
Thank you.

It seems you are using the same name for all the ticker instances on page.
You need to have unique names for each of the ticker you want on a single page. Tickers with duplicate names will not work.
Cheers,
Vikas

Has anyone been able to get a mouse scroll wheel to work with a scrolling text box in authorware?

Has anyone been able to get a scroll wheel to work with a
scrolling text box in authorware? Is there any way to attach the
hardware of a scroll wheel to a scrolling text in a piece? Sure
would make things easier for the reader.

I doubt it. Maybe using the WinCtrls.u32? But after a few
tries years
ago (before the WinCtrols.u32), I'd pretty much given up.
Erik
edwin e wrote:
> Has anyone been able to get a scroll wheel to work with
a text box in authorware?
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

[svn:fx-trunk] 8452: - Fix flicker problem with constraint bound text that is being autoSized.

Revision: 8452
Author:   [email protected]
Date:     2009-07-08 08:38:32 -0700 (Wed, 08 Jul 2009)
Log Message:
- Fix flicker problem with constraint bound text that is being autoSized. If the remeasure is done in a 2nd pass you will see a flicker as all the objects are moved to accommodate the reflowed text.
- Fix data binding issue with text setter.
- Rework measure() to accommodate implicit autoSize.
If explicitWidth or widthInChars specified and explicitHeight or heightInLines specified, or for now, blockProgression != "tb", the text has fixed dimensions and is not auto-sized.
If no text and width specified, but no height, start at specified width and one line high and grow taller.
If no text and height specified, start at 1 char wide with the specified height and grow wider.
If neither width nor height specified, and toFit lineBreaks, start at explicitMaxWidth, or default maxWidth of 160, and grow taller.
If neither width nor height specified, and explicit lineBreaks width is unlimited and can grow taller.
These are further constrained by min/max Width and Height except in the case that explicitWidth or explicitHeight are specified.
- Change default maxWidth for RichText and SimpleText to 160 to match RET. Previously it was 10000. This is used for
text with toFit lineBreaks if a width isn't specified.
QA Notes: 12 or so TextGraphic tests fail because of the new default maxWidth.
Doc Notes:SDK-22014, SDK-21837
Reviewers: Gordon
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22014
    http://bugs.adobe.com/jira/browse/SDK-21837
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextContainerManager.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/TextGraphicE lement.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextEditManager.as

You have used elements like header, footer, footer1 and nav without using the correct DOCTYPE declaration. Replace the first line of your code with
<!doctype html>
Also have a look here for other problems http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fhome.surewest.net%2Fstorytales%2F test%2Fforposting.html
After the above has been fixed, please come back here to fix the remaining problem(s)
Gramps

How to link one scroll bar with two dynamic text boxes.

How to link one scroll bar with two dynamic text boxes.
If i move scroll bar in one text box,automatically text will
be moved in another text box.But scroll bar is not visible.
Can you please help me.
Thanks in advance.

See the following article:
JavaScript - setFocus Method for tabbing to next form field
And see if iOS can even handle the sample form.
iOS and android devices are not a powerful as your desktop of laptop computer and have limited support for JavaScript within PDF forms. This limitation for specific apps ranges from none to quite a bit but not all JavaScript.

My ipad is freezing problem, it indicate some text box, i cant to get into general settings, how can i reboot my ipad manually?

my ipad is freezing problem, it indicate some text box, i cant to get into general settings, how can i reboot my ipad manually?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Problem with lenght of text and footer elements displaced (bug?)

I have a problem with the footer of my pages. The footer is composed with elements of the master page and two elements that are page dependant so these elements are defined in each page. All the elements in the footer are marked as page footer elements so they should appear below the main content of the page and all in the same position relative to each other.
But the truth is the main content extends below the top of the footer overlapping it and the page dependant elements of the footer are displaced in the same amount and so these elements do not match in the space reserved for them in the footer.
I think the problem is caused by the text box in the main content being displayed with a bigger height than it appears in the editor. Even worse: every web browser shows the text with a different height so the footer elements all appear displaced differently. I have tried to define the height of the text in pixels (px) instead of percentage (%) but the result is the same. But even with this indetermination, the footer should always appear below the main content and not overlaping (or overlaped) by it, so either this is a bug or I am doing something wrong.
Here is how i see the page in the editor. The grayed out keywords and the "UK Photographers" link of the footer are in the current page. All other elements of the footer (horizontal line(rectangle of 1px height), "facebook - links - contact" links and Copyright notice) are in the master page:
This is how the page appears in Firefox 15 with the text zoom set to default. notice how the footer elements that are defined in the current page appear overlaping those defined in the master page (there should be a 27px space between the end of the text and the horizontal line) and moved down in the same amount than the main content exceeds the footer limit:

I am able to repro this on my end as well. Seems like a bug that we will be fixing in a future release.
Work around would be to make sure that the footer item on the individual pages are above the ones from the master page or put everything on the master page or the individual page.
- Abhishek Maurya

Problem With File Download Dialog Box

Hi all,
I have jsp page that allows a user to export oracle data to excel.
I have these code in my page:
<%@ page contentType="application/vnd.ms-excel" %>
response.setContentType ("application/vnd.ms-excel");
response.setHeader ("Content Disposition",
"filename=\"historicalrate.xls\"");
I run the page and it popups a file download dialog box with Open and Save buttons.
When I click the Save button a Save As window opens with a hr.xsl file name and Microsoft Excel Workbook(*.xls) as save type. It is what I want.
The problem I have is when I click the Open button on the file download dialog box it displays data in excel format on a browser well. Then I click File > save as on browser's tool bar the Save As window pop up with no file name and a default Text(tab delimited)(*.txt).
I need the file name and Microsoft Excel Workbook(*.xls) as default save type.
Any help would be greatly appreciated.
Please help
Thanks

I have the same problem with hui_ling.
When user click on "Open", Excel start and open excel file correctly but the file name on excel title bar. 'Cause the file name is in Japanese characters. Any one can help me?
Message was edited by:
TNTVN

New tabs open Google homepage correctly but with cursor in text box rather than search box.

I have Google as my home page. When I open Firefox 7.0.1 the Google home page opens correctly with the cursor in the search box. I have set new tabs to also open in the home page. New tabs do open in Google but with the cursor in the text box rather than the search box. As I recall, this didn't happen before upgrading to 7.0.1 (actually, I think that I was using a tab configuration plug-in that may have been nuked in the Firefox update). This is driving me crazy, is there a solution for 7.0.1?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problem with bullets in a UL

I have a problem, with ordered lists and the bullets hiding
behind an image. You can view the layout on the page
http://www.mansfield.gov.uk/env_menu/ts_energy_main/ts_energy_savings.htm,
at the moment it uses the style
ul {
list-style-position:inside
However I don't really want the bullet to be inside, however
when I remove the above style the bullets disappear behind the
image, I've tried using the extreme style of
ul {
margin-left: 10em;
padding-left: 10em
but this does not move the list elements next to the image,
only the others.
Does anyone have any ideas how to move the bullets out from
behind the image?
Thanks

When I remove list-style-position:inside the bullets show
fine in FireFox.
Not sure how IE is handling that since I didn't DL your
page.

Creating 3 links each with pop-up text box on the same slide

Hi,
I'm trying to create a slide that has 3 links and each link has a pop-up text box. I do not want to separate the pop-up text into separate slides. I have it so that there are 3 click boxes and each have the action "show" the proper text box. I also created another click box that acts as a close button where the action is to hide the pop-up box. I have an extra click box hidden on the page to make sure the user stays on the page and not automatically advance.
Once I have the user click on the first "link" it shows the text box. Once the user clicks the close click box it takes the user to the next slide. I just need it so that it shows the user the pop-up text and then when the user closes the pop-up and returns to showing the 3 options/links. So it basically refreshes the slide instead of going to the next slide.
Thanks,

This will be a little tricky to achieve. This is because per default Adobe has decided that any interactive object (like a button or a click box) that has a user defined action on it (like continue, pause, open URL etc.) automatically continues to play the project when clicked.
Therefore when you click your button it will show your textbox, but it will also continue to play on your timeline.
You can read some more about it here: http://forums.adobe.com/thread/479725?tstart=0
I did something similar to what you want one time and I just created a bunch of click boxes and made them very small and put them in a corner. The click boxes were placed on the timeline with 0.2 seconds between the pauses. Then I created my "real" buttons to show/hide the text boxes and placed them on the timeline before the other click boxes.
The result is that once a user clicks your button it will show the text caption you want - continue on the timeline and pause at the first click box. When they click another button the same will happen. Just make sure that you have a lot of click boxes (I think I put like 30) and make sure that your navigation button for advancing to the next slide is set to "go to next slide" and not "continue" as that would make it pause at all your click boxes as well.
/Michael
Click here to visit the www.captivate4.com blog

Issue with creating a text box from a loop

I was hoping someone could take a look at this code and maybe
help me find out why this isnt working. What I am trying to do is:
(NOTE: I have used a few differents scripts and combined them, so
the code may not be the greatest).
Pull Data from a PHP file (The PHP file gets it's data from
database)
Then run a loop that brings in First Name, Last Name, Jersey
Number, and Position
Then before it loops and gets the next player it creates an
array that creates 3 text boxes with Full Name, Jersey Number and
position
then it loops through the process again untill all of the
records have been retreived.
I'm not sure if its because I have a do while loop inside of
a for loop inside of a function and an Array. I'm new to Arrays and
loops. the issue is it wont display the text boxes.
NOTE: When I trace this, the data is being retrieved.
Thanks for the help

"this" inside your onLoad() method refers to your loadvars
instance, receive. and the loadvars class has no createTextField()
method, so you're not going to create any textfields if that code
is in the onLoad() body.
to remedy, reference a timeline instead of receive.

IPhone 3GS multiple problems with calls and text

I have AT&T for service provider and I am having these problems with the THIRD Iphone 3Gs that I have received since Jan 12.
I turned off 3GS again after newest update, not sure if it willl help or not.
Also, I have the same problems with this phone as previous 2 Iphones I got at Apple Stores:
* sporadically drops calls - even if I don't move from the spot I originally called from. This is my only phone, so I need to make and receive any calls to this phone.
*"Searching", "No Service", so text messages don't get sent, but I don't know that unless I check back to see the red ! and I keep trying to resend...
* No SIM card - but, only know this if I check, not good when busy and waiting for a call or text.
Do I need to go to an Apple store again (not nearby me) to replace it before my replacement warranty runs out?
Thanks for any help!

Try powering the phone off, then removing and replacing the battery, and powering the phone back on.
Then try dialing *228 send and option 2 on the phone to update the PRL.
Then try closing down applications that you are not using on the device.
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Settings.
Touch Applications.
Touch Running services.
Touch a service you are not using then.
Touch Stop.
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Settings.Touch Applications.Touch Running services.
Touch a service you are not using then.
Touch Stop.
Repeat steps as needed.

I have a requirement with select and text boxes. JSP / JDBC

I have a Combo Box which iswritten by a JSP by connecting to DB!
When i click on a <option> corresponding the other two text boxes must be loaded with data!
if i have list of EmpID in <select>, in one text box i should get his CITY and other Occupation !
What i thought is .... getting all the data from database. select empid from emp and write a combo and select city,occupation from emp, intp ARRAYLISTs!
function updatData(){
var index=document.projalloc.associateid.selectedIndex;
}if i onSelect=updateData(), (i will get index of empid,as it is a combobox) using which i have to retrieve the values of city and occupation !!
BUT HOW !
I am gettin the index of empid but how to get the data into textbox !!!!

well there are many ways of doing this.
1).Render all the data corresponding to each employee at a time.By making a javascript arrays and try to get back the data from there.
2).Save the ArrayList of DTO beans in the scope of session.Use AJAX call a CGI(Servlet/JSP action) fetch the values from the session render the response as XML now parse the XML data using javascript DOM and then update the consecutive textboxes.
Just as an example checkout my answer in the below post.It was an example given for a dependent drop downs.however, we can definately use the same concept to update textboxes too.
http://forum.java.sun.com/thread.jspa?threadID=5209661&messageID=9844137#9844137
Hope that might help :)
REGARDS,
RaHuL

Cannot print document with added barcode text boxes

G'day
I'm adding two text boxes to an illustrator document with Applescript, but when I go to print, ?I get an error 'Cannot print the illustration. The Color Management settings are inconsistent.'
The error message is not error trappable.
I have to barcode thousands of documents a year, and this is a big deal breaker. Is there any fix, please?
Regards
Brian Christmas
try
set printerName to my theLargePagePrinter as string
set paperOptions to {class:paper options, name:largePaperSize}
set jobOptions to {class:job options, designation:all layers} # , print options:printOptions}
set colorOptions to {class:color management options, profile kind:printer profile}
set flatOpts to {class:flattening options, clip complex regions:true, gradient resolution:360, rasterization resolution:360}
set printOptions to {class:print options, printer name:printerName, paper settings:paperOptions, flattener settings:flatOpts, job settings:jobOptions, color management settings:colorOptions}
try
set p to 17
tell application "System Events" to tell process "Adobe Illustrator"
click menu item "Fit to Artwork Bounds" of menu 1 of menu item "Artboards" of menu 1 of menu bar item "Object" of menu bar 1
end tell
end try
set p to 18
say 7
print document 1 options printOptions
say 8
on error errmsg number errnum
tell application "System Events" to display dialog "Error in printing illustrator document. " & errmsg & " number " & errnum giving up after 40
end try

G'day Owen, & W_J_T.
Unfortunately your suggestions did not work for me.
I've tried using the GUI to access the print dialog box, but as usual with Adobe, they've stuffed that up too. What I did find however, that the print dialog box recognised keystrokes, and always defaults to the Printer box when opening.
Also, the Printer box sets itself to a matching item of whatever key is pressed, and so does the Printer Preset box.
So, even tho I can't select any given box, provided I have a Printer Preset set, I can access it by the following (slower) method...
activate
tell application "System Events" to tell process "Adobe Illustrator"
keystroke "p" using command down
keystroke (character 1 of (my theLargePagePrinter as text)) as text
repeat 17 times
keystroke tab
tell current application to delay 0.1
end repeat
keystroke (character 1 of (my theLargePagePrinter as text)) as text
keystroke return
end tell
Note that if you have more than one printer or Printer Preset starting with the same letter, then you'll have to use more than just the first character of your printer name.
Regards
Brian Christmas

Problem with bullets in text boxes

Similar Messages

Maybe you are looking for